Figures made of light plasticine. Photos on how to sculpt step by step for beginners

Features of working with the material

Figures made of light plasticine attract attention, look aesthetically pleasing and picturesque, regardless of what kind of product is made. Light plasticine differs from ordinary plasticine in that the material hardens when the work is completed. If simple plasticine, which everyone is used to, can easily squeeze or break the finished product, then airy plasticine holds its shape for a long time.

Airy plasticine, regardless of shade, is a very easily soiled material. Therefore, before you start sculpting figures, you need to make sure that your hands are clean and dry.

The material dries quickly. This is worth keeping in mind after finishing work, since it may not be possible to return the remaining plasticine to the bag. In order to avoid this problem, you need to take care of an airtight storage container in advance. This can be any box or bag that does not allow air to penetrate. It should be stored in a dark and cool place so that the lightweight plasticine does not lose its properties after a long time.

This kind of work is designed for speed. This is especially important when working with small parts. Due to their small size, they dry out too quickly. Therefore, you should not hesitate to attach the parts to the base of the product, otherwise they will dry out and will not be able to attach properly.

How does modeling affect a child’s development?

Modeling from plasticine is a fascinating artistic activity that is not just great entertainment for children. Her goals are much bigger. The possibilities of the material as an artistic project are diverse and important for the social, cognitive, emotional, and physical development of the child.

Health and emotional background of the individual

Playing with plasticine is one of a number of sensory games that play an important role in a child’s development. Sight, smell, hearing, touch, taste are all included in sensory play. In fact, it is more than just touch, sensory exploration is a child's way of exploring, discovering, classifying and making sense of the world.

Playing with plasticine helps develop fine motor skills in a child. During modeling lessons, small muscle groups in children's fingers, hands and wrists are trained and strengthened, helping to facilitate the process of learning to write. The control over finger movements used when modeling from plasticine is actually the same as the ability to hold a pen and write with it. Without well-developed fine motor skills, a child may have difficulty not only learning to write, but also performing other tasks such as turning the pages of a book, cutting, drawing, squeezing glue out of a tube, tying shoelaces, or zipping up a zipper.

Modeling calms a child during an “emotional crisis” - it helps regulate internal discomfort, be it boredom, anxiety or another type of excitement. Creating figures, be it a bunny or a kitten, or any other animal, allows kids to feel competent and proud of their achievements (“I can roll out”, “I made a smesharik”). During modeling classes, children communicate with each other, describe what they are doing and how, observe the actions of their comrades and compare actions and objects, which teaches interaction with each other and joint actions.

Mental and Personal Development

Through playing with plasticine, children express their ideas, satisfy their curiosity, analyze and solve problems, and learn symbolic thinking. While playing with play dough, children listen and talk to peers or adults, which helps them expand their vocabulary as they describe their actions, make up stories about their creations, use ideas from books they read with their parents, and refer to what they see in Everyday life.

Psychologists say that children live to play; they learn to understand the world through play. When they play, they explore, control or change their environment, and learn to concentrate on something - all of which provide a preparatory stage for later academic achievements. A child's learning depends very much on his ability to feel and touch.

Slime made from light plasticine

Slime (lizun) is one of the popular anti-stress products at the moment. It is a jelly-like substance that does not stick to your hands. This slime has the property of stretching. Slime can often be found on store shelves, but can be made at home from light plasticine.

To make slime at home you will need:

• Air plasticine.
• Mixing container.
• Water.
• Shampoo.
• Shaving foam.

To make the finished slime even larger, you can use several packages at once. However, you should be careful when choosing a shade, since when mixed you should get a beautiful color. It is recommended to use 2 colors, for example, hot pink and pink, but a lighter shade. This way you will get an original and pleasant color for the finished slime.

1. You need to mix 2 packs of light plasticine. It is necessary to achieve the effect that the color is uniform, without unmixed areas on the material.
2. The mixed mass lies in the container. Warm water is added to light plasticine. Depending on the amount of material, water should make the mass more liquid. The finished plasticine is mixed with water.
3. Next, add a few drops of shampoo. It doesn't matter what kind of shampoo it is. You can choose a shampoo with a certain scent so that the finished slime has a pleasant aroma in the future. After adding shampoo, the slime is mixed.
4. The last step is shaving foam. This material is not worth regretting. The amount of foam should be equal to the amount of plasticine that is in the container. After the final mixing of shaving foam with plasticine, the finished slime is obtained.

The slime, made of light plasticine, does not stick to your hands. It has a pleasant texture and does not make any extraneous sounds. It feels like a slightly melted marshmallow. An anti-stress like this would be a great thing to keep your hands busy in your free time.

Clothes for dolls

One of the ways to make a toy original is to come up with clothes yourself. However, since sewing is a very complex process, a material such as air plasticine comes to the rescue.

One of the features of clothing made from such plasticine is that it is very easy to take off. Unlike ordinary plasticine, this one does not leave stains on the dolls’ bodies that cannot be washed off. So no need to worry about the condition of the doll. If you work carefully, the toy will remain in its original form.

It’s easy to make a dress for a doll from a pliable material:

1. You need to sculpt clothes from top to bottom. Therefore, initially there must be a clear picture of the desired dress. You need to decide what the top will be: sleeveless, open or closed.
2. Roll out 2 small circles from light plasticine: one for the front and the other for the back. Depending on the chosen style, the rolled material is attached to the doll. Do not press the plasticine close to the plastic. It is enough just to make sure that it sticks to the model.
3. Until the finished top has dried completely, it’s time to decorate it. Rhinestones, beads, or simple patterns made with a special stick are perfect.
4. After the top part of the clothing has completely dried, you can proceed to the skirt. If the idea is to have a full skirt, then you need to use a supporting material on top of which the skirt will be molded. Foil is perfect because it can be removed without much effort when finished.
5. You can start creating the skirt. Here, just like with the top, everything depends only on imagination. For example, you can make small dots along the hem of the skirt, which will give the image more detail.
6. To make your finished clothes shine with new colors, you can come up with an original belt. He will attract attention and give the image new features, distributing attention to accents. Such a belt can be of any thickness and decorated in any way you like. Everything depends only on the imagination of the creator.

These instructions can also be used to make a T-shirt and shorts for Barbie. Clothes made from air mass will look stylish not only on girl dolls, but also on boys. You can create unique pants and a t-shirt with a pattern.

To make the clothes look even more interesting, you need to detail the finished outfit.

How to diversify doll clothes made of plasticine:

Pizza

It turns out that dolls also love pizza. It's worth doing for them right now. Here are some options:

How to make food for dolls from plasticine

https://www.youtube.com/watch?v=e-yd7oJEO4c

Figures made of light plasticine look very attractive when they look in the form of some kind of food. Their sculpting will not take much time, and the result will be a pleasant decor to diversify puppet play. In addition, decorative food made from light plasticine often appears in many photographs, arranging some compositions.

Dough products

Donuts, pies, hamburgers and many other products made from dough will look attractive on a toy table.

Photo of a hamburger figurine made of light plasticine step by step

In order to prepare a plasticine donut, you need:

• Orange, white and pink airy plasticine. If desired, you can add a few more colors to make the finished donut brighter.
• Toothpick or stack.

Sculpting process:

1. You need to roll out a small stick from orange plasticine. If the donut is planned to be too small, this must be done quickly, since the material dries out.
2. The 2 ends of the stick need to be connected, thereby forming a hole inside.
3. Use white plasticine to make the base of the filling. To do this, roll out a small cake, which is later placed on the top of the donut.
4. You need to add sprinkles on top of the white filling. Multiple colors can be used. Several small sticks are made, carefully attaching them to the white filling. In addition to airy plasticine, you can add beads or sparkles.
5. You can draw several strips in a stack from above and below. This will make the donut more detailed.

Candy

Figures made of light plasticine in the form of candies will look very interesting next to the doll. In order to prepare the lollipop, you need:

• red and white air plasticine. If desired, you can use other colors that suit the image more.
• Toothpick

There are no difficulties in the process of sculpting sweets:

1. You need to roll 2 sticks from different colors. For example, white and red.
2. 2 strips of flowers need to be connected, but not glued together.
3. It is necessary to wrap the plasticine from one end so that something resembling a candy is formed. The base is ready.
4. In order to make a stick, you need to break a toothpick in half. In the place where the small tip remains, stick a stick.

Fruits

Preparing the fruit won't take much time. This can be demonstrated by sculpting a watermelon.

To do this you need:

• Airy plasticine in green, white, red and black.
• Stack.

You need to start sculpting a watermelon slice with the distribution of colors. The first step is the base, that is, the green color. A small arc is made from it, which is slightly depressed.

White plasticine is added inside the green arc, which should completely enclose the green interior. Depending on the thickness of the arc, a red circle is made. This will be the pulp of the watermelon. A triangle is cut out of the circle in a stack, which should fit tightly to the white part of the watermelon.

Next, several dots are made from black plasticine, which are the bones. The most organic option is to add one bone in the middle of the red triangle, and the other two a little lower on different sides. It all depends on the imagination and the desired result.

Vegetables

Figures made of light plasticine, which represent vegetables, will look very natural. Especially if you choose natural shades. We can look at the example of carrots.

To do this you need:

• Plasticine orange and green. In order to make the vegetable more realistic, orange can be mixed with brown.
• Toothpick.

First you need to take orange plasticine. A three-dimensional stick is rolled out of it, giving the shape of a carrot. As a rule, it is a cone with rounded ends. Until the material has completely dried, you can make several lines along the radius of the carrot with a toothpick. Thanks to these simple movements, the carrots will become realistic.

Next comes the green tail of the carrot. For it you need to roll several strips of green color, and then connect them with one side of the ends. The other end should be bent in different directions. Thus, the carrot greens will acquire a lush volume. On the leaves, as well as on the carrots, you can make several movements with a toothpick. It will create the effect that the leaf has membranes and a stem.

Candies

One of children's favorite treats is candy, especially chocolate. To prepare them you will need 2 pieces of plasticine. One of them is brown, it will become an analogue of chocolate, the second is white, it will be fudge.

Children like it when there is a lot of candy, so it is better to immediately divide a piece of brown plasticine into several servings. Mash each portion and then shape it into one or another candy, for example, a round elongated bar, a hemisphere or a truncated pyramid. For variety, you can make several types at once.

Notches are made on the surface of the candy using a knife, and white plasticine, acting as nougat, is placed on top in strips. You can wrap the candy in candy wrappers, then it will be impossible to distinguish them from the real thing.

Animals

Animals made from airy plasticine look very interesting. Thanks to the unique texture of the material, the animals look three-dimensional. Such figures can be used as decor for a child’s room or even for games.

How to make a penguin from plasticine

To sculpt a penguin you need:

• Black, white and orange air material
• Black gel pen.

You need to start sculpting with black material. A large black oblong circle is rolled out of it. This will be the body of a penguin, so it’s worth deciding what size the craft will be ready for.

A slightly smaller white flatbread is made, but also round in shape. It can be narrowed towards the top, but this is optional. White plasticine will serve as the belly and face for the penguin. Therefore, you need to glue it on the front side of the almost finished penguin.

Use a black gel pen to place 2 dots on the head. These are the eyes of an animal. The beak is made from orange plasticine. It should be a small volumetric triangle, which is attached in the middle from the eyes. From the remains of the orange color, 2 volumetric triangles are also made, which serve as the penguin’s paws.

Ice cream

You will need: plasticine of bright colors, a spatula, a stack, a wooden skewer, beads and rhinestones.

Master Class

1. Roll a ball of brown plasticine.
2. Flatten the ball into a flat cake.

3. Draw lines with a stack, creating a waffle texture.
4. Twist the workpiece to form a cup, then secure the edges.
5. Roll balls of bright colors of different sizes.
6. Use a skewer to process the halves of the balls as shown in the image.

7. Place the balls into a waffle cup.
8. Decorate the ice cream by attaching beads and rhinestones.
9. Make a cherry and attach it to the top of the ice cream.

Plasticine ice cream is ready! I recommend watching this video!

DIY Making Play Doh Ice Cream Popsicles

Figures

Making a figure from light plasticine is easier than it seems at first glance. For example, a cupcake-shaped figurine can be an excellent decor for your desktop.

For this you will need:

• Airy plasticine in beige, white and pink colors.
• Beads or other decorations
• Toothpick.

First, a cake basket is made. For now you only need beige color. A cylinder is molded from it, narrowed at the base. Using a toothpick, a relief is made along the entire diameter of the finished basket.

For a more interesting cupcake filling, mix 2 colors. For example, pink and white. It can be left unmixed, thus leaving picturesque stains of one tone in another. A long stick is rolled out from the finished mass. It is attached to the basket and twisted in a circle, thereby forming a cream.

Finally, the filling is sprinkled with beads or rhinestones. This will serve as a topping on the finished cake.

Donkey

The figurine of this animal is a little more complex than an elephant. The donkey is decorated with a bushy tail and a curly mane, so additional work will be needed.

Let's start with the head. It is very important to sculpt it in the correct shape. Once this detail turns out, then the donkey itself will work out. Roll out the brown ball into a cylinder, stretch one end out a little. Press the attachment point to the body slightly with your finger.

Now we need to “conjure” with this blank. Any hard object with a rounded end will help with this. You need to make dents for the eyes and nostrils. Immediately sculpt the eyes and put them in their places: stick a black ball onto the white flattened ball.

With the legs, you don’t need to be tricky: sculpt four identical cylinders and place the body on them - a thick cylinder, rounded at the ends.

The tail of this cute animal requires attention. It must be woven from thin flagella, which differ from each other in shades of brown.

The donkey's mane also requires a creative approach. It also consists of flagella. They need to be twisted at the ends, and lines should be cut at the base with a plasticine knife.

Such a donkey stands firmly on its legs and is ready to amaze with its beauty.

Flowers

Sculpting flowers is not an entirely simple process. However, if you make an effort, the result will be a beautiful product made of airy plasticine that will please the eye.

To make a flower from plasticine you need:

• Airy plasticine green and red. The red color can be replaced if desired, since the color of the plant’s petals depends on it.
• Toothpick.
• Stack.

You need to start working from the bud. To do this, several round or oval parts are rolled out. In the case of flowers, accuracy is not important here. Parts can be of any size and shape. A total of 5-8 petals should come out. You need to start collecting from the smallest of them. The center of the flower is formed from them. Then, progressively, the entire flower is pasted over.

Next, all you need is green. The receptacle for the plant is made from it. To do this, you need to roll out an oval that is suitable in size, and then wrap it around the base of the petals from the bottom side.

Next, the stem is molded by rolling out green plasticine to form a stick. All that remains is to prepare the petals. To do this, several ovals are rolled out, from which, using a stack, the required petal shape is cut out. Finally, the stem and membranes of the plant are drawn on the front side of the leaf using a toothpick.

Donut

You will need: plasticine of bright colors, a stick, a plastic spatula.

Master Class

1. Roll out a ball of yellow plasticine.

2. Flatten the workpiece and press the center with the round tip of the stack-bulk.
3. Trim off excess plasticine from the back side.
4. Make a cake from pink plasticine.

5. Attach the doughnut to the donut base and make a hole in the center.
6. Roll plasticine flagella in bright colors.
7. Place the flagella in the freezer for 5 minutes.

8. Remove and cut the frozen flagella into small pieces.
9. Decorate the donut by adding sprinkles.

The plasticine donut is ready!

Badges and keychains

In order to diversify your keys or bag, you don’t have to go to the store to buy a key fob. Everything can be done at home thanks to lightweight plasticine. For example, a keychain in the shape of an ice cream would look very interesting.

To sculpt it you need:

• Ring from an old keychain.
• Airy plasticine in beige, pink and blue. Pink and blue shades are used to fill the ice cream, so other colors can be used.
• Beads for decoration, optional.
• Toothpick.

Making an ice cream cone starts from the bottom, that is, from the cone itself. Beige plasticine is used for this. A cone with a pointed tip rolls out of it. Until the horn has frozen, a toothpick is used to make a horn pattern.

Incomplete mixing of pink and blue will give a new shade - lilac. This way the ice cream will come in 3 colors. A long strip is rolled out from the mixed mass, which will later need to be rolled, carefully placed on the larger part of the cone. The top is sprinkled with beads or rhinestones.

To ensure that the ice cream remains not just a figurine, but a keychain, a ring removed from the keychain is attached to the very top of the product. If the plasticine has frozen, you can use glue.

Cartoon characters

Children love crafts in the form of “cartoon” characters. Fantasy in this direction is not limited, and the child himself chooses his favorite character. As an example, consider the process of creating a Winnie the Pooh figurine. The technology is not much different from creating a panda, but brown plasticine is used. The basis is an oval part - the body, a spherical part - the head, made of light brown material. A characteristic muzzle and ears are formed on the head. Paws made of darker brown plasticine are attached to the body.

Airy or light plasticine is a modern craft material that allows you to create original crafts. People of any age can get carried away by this kind of creativity – from children 2-3 years old to the elderly. The manufacturing process develops fine motor skills and spatial thinking, and crafts can become a good gift or a useful thing in the household. It is important to take into account the properties of the material and correctly take advantage of its advantages.

School supplies decorations

At the moment, it is very popular to make “applied” caps for pens in the shape of animals.

To make a similar one in the form of a panda's head from light plasticine you will need:

• White and black air plasticine.
• The handle on which the product will be attached.
• Black gel pen.

You need to start modeling with white plasticine. A white ball rolls out of it, which will serve as the panda's head. The ears and eyes are made from the black mass. Since pandas have black circles, their eyes should be larger than usual. You can attach small parts made of white material to them, which will serve as highlights in the eyes. Use a black gel pen to draw a neat nose between the eyes.

You need to attach the product to the handle until it dries completely. You just need to pierce the head, placing it on the handle and make sure it is well fixed.

The finished figures dry in a matter of minutes. It often happens that due to leaky storage of light plasticine, the remaining mass hardens. But there is no need to rush to throw away seemingly spoiled material. In order for the light mass to acquire its former properties, it must be dipped in warm water, slightly squeezing the plasticine in the liquid. After which it will return plasticity.

Article design: Vladimir the Great