How to Make a Scorpion Knife From Standoff 2 From Plywood • Vladislav Igorevich 1

Origami is the folding of various three-dimensional figures from a square sheet of paper. Originating in the countries of the East, this type of creativity has conquered the whole world. Such an exciting hobby does not require large investments of money. It is enough to purchase thin white or colored paper of A-4 format, from which a large square is cut out. The most convenient way to make an origami blank is to bend one of the corners to the opposite side. All that remains is to cut off the extra rectangular strip with scissors and the square is ready. You can start doing the work.

In this article we will look at how to make a scorpion out of paper. This formidable creature can be used for games, compositions or for exhibition at school. It’s easy to make a three-dimensional craft using origami patterns, working step by step. Let's look at one of them in more detail.

Scorpio costume. Cosplay. How to make a mask from epoxy resin

1. It all started with making a mold from plasticine for a papier mache mask. I sculpted it on a concrete head made in the shape of my head.

And that’s what happened, a total of 5 hours of fiddling around and the form is ready. Next, the plasticine mold must be greased with oil or Vaseline, so that later you can easily peel off the papier-mâché mask.

3. You can use toilet paper, or you can use newspaper, but when you need maximum detail, then toilet paper is better. I applied about 6 layers of paper, this is not enough, but then I reinforce it with something else.

4. For strength, I put gauze between all layers in the middle, it’s like bum carbon or bum mesh fabric, but that’s not all.

5. It takes about 3 days to dry in the room without a hairdryer, but with a hairdryer you can dry it in 1. taking the plasticine out of the mold

7. I drill out the airways and use a file to level them. (In the original, the scorpion does not have airways, but I made it so that it would be comfortable to wear for a long time)

8. And here is the reinforcement of the mask with epoxy resin and fiberglass. 2 layers from the inside applied

9. I first paint it black and after drying I paint it gold and don’t let it dry, I start rubbing it with a rag, this way I create abrasions and some kind of structure there, I’m not an artist.

10. I first cover the respiratory tract with a metal grill and then with a black thin cloth and simply glue it

12.further foam pads for comfortable wearing

13. The mask is ready, let's move on.

16. I use some simple techniques to add volume to the bracers

17. eva foam can be easily shaped by heating it with a hair dryer, holding it for a while and any shape is ready.

18.I make the same straps as in the mask and glue them with a glue gun. holds firmly

18. done, let's move on.

19.I make a scorpion vest from denim fabric. I outline on paper forms

21.and here I sew Velcro on the inside of the belt. There wasn’t enough yellow fabric, so I sewed gray fabric inside the belt (waistband), it’s not scary, because it’s not visible.

22.and here I sew on bias tape and edging to make it more beautiful

23. I make holes on the belt for lacing

24. and now everything is ready

and here is the suit. I didn’t buy white pupils like the original ones, they are expensive and they say they are hard to see and not comfortable to wear. and I made a suit to wear at events. Maybe I’ll go to Igromir 2022 in it, or I’ll make a different costume, a different character. I also made a dummy of a flying snake, like in the 1995 film, in the forest. but the snake turned out to be unsuccessful. but there is a video about the snake and about the scorpion costume on YouTube

Source

Master class: Wire Scorpion

In fact, I heard out of the blue that weaving all sorts of tchotchkes out of wire is a separate type of needlework with its own fans and a set of tricks, tools and terms that are understandable only to workers of the same art.
To be honest, I don’t really want to understand all this, but today I came across an excellent master class on INSTRUCTABLES.COM, and I decided that it was worth translating, regardless of whether I am a follower of wire twisting or not. Author: Vanessa Lee

Okay, enough reasoning, let's get down to business.

Some time ago I came across a wire scorpion in a souvenir shop. I was touched and bought a little thing so that through trial and error I could learn how to make the same ones. This work is still far from perfect, but it is certainly suitable as a first experience.

Necessary materials

  • Soft wire
  • Wire cutters
  • Round nose pliers

Step 1: Wire Bundle and Tail

Cut 14 pieces of wire 17 centimeters long. Place 6 pieces together, find the middle and start wrapping one piece around the rest. Continue doing this until two wires remain free.

To twist the wires evenly, you need to direct them towards each other at an angle of 90 degrees.

Step 2. Making the paws

The remaining eight pieces of wire will be the paws. Take one of them, find the middle of it, wrap it around the base of our tail from the last step (look at the picture) and pull it tight. The same must be repeated with the remaining pieces:

Make sure that each wire is twisted the same way - from left to right or vice versa.

Step 3. Build the body

We turn our scorpion over and... How can I explain this?... Take the far ends of the wire and move them forward crosswise and wrap them around the bundle of wire again. Make sure the wires cross evenly. Look at the illustrations, the action is not particularly complicated:

Step 4. Curl the legs

We turn the scorpion over again and twist the side wires in pairs, turning them into legs.

Step 5. Jaws and claws

Take the remaining six wires and divide them into three pairs as shown in the photo. Twist the top two pairs like the legs.

Step 6. Cut and bend

Trim the legs, claws and jaws to the desired length and bend into the desired position. You can decorate your scorpion in some additional way, but it’s already beautiful as it is. Enjoy!

And another scorpion made using the same technology:

Source

Features of paper scorpion

Many fantasy fans may know exactly how to make a paper scorpion mask in the Mortal Kombat style, but not many are aware that there are other types of crafts. You can make a magnificent three-dimensional figure of a real Scorpio, make a beautiful picture of the zodiac as a gift. And all these crafts are formed either from paper or cardboard.

Examples of crafts in the form of a scorpion

Options for finished paper scorpions that are most popular:

There are many more options and types of crafts of this kind that can amaze the imagination.

Tools and materials Time: 2 hours • Difficulty: 2/10

  • round beads of the colors that Scorpio will be;
  • 2 beads, 2-3 sizes larger than the main ones;
  • wire;
  • wire cutters

So, how is a beaded scorpion made? Now you'll find out!

The scorpion is a miniature arachnid animal, so ancient that the ancestors of the scorpion closest to the current species lived during the period of the appearance of Pangea. These are very heat-loving animals that are nocturnal. Poisonous predators.

No less than a real animal, the symbol of Scorpio is known in the zodiac horoscope. It is believed that people born under this sign are subject to passions, strive for power and love, but are nevertheless wise and reasonable.

Required materials and tools

When making any craft, paper is used. It can be a regular white or colored base. To strengthen the structure or create a more durable figure, cardboard of different hardness is used.

Additionally, you will have to use paints, glue and scissors. To make the composition more complete and “reliable”, you can use decorative elements - beads, ribbons, small plastic stones. To determine dimensions and prepare sketches (diagrams, drawings), a simple pencil and ruler are used.

Step-by-step assembly of a scorpion using modular origami technique

You can get a three-dimensional figure of a scorpion with detailed detailing by assembling it using the modular origami technique. In this case, you can use a variety of colors to assemble the modules, but more often the assembly is made from white paper.

Scheme using the modular origami technique of a scorpion:

The result will be this version of a three-dimensional scorpion figurine.

Origami with a simple diagram

To create an interesting craft for such a dangerous arthropod as a scorpion, it is enough to use a not too complicated assembly scheme.

Scheme for assembling an origami scorpion from paper:

The result will be a scorpion created using the rigami technique. In this case, a completely simple scheme will be used, which a primary school child can repeat.

Applications for children in quilling style

It is interesting and educational to make a paper scorpion with your child using the quilling technique. This version of work includes several principles of working with a paper base - cutting, modeling, gluing to the base. This is an ideal type of work for children. How to make an applique in the quilling style:

This composition can be an excellent painting to decorate a notebook or wall.

Mask ideas

On the eve of the holidays (New Year, Halloween), the question arises as to how to make a scorpion mask out of paper. The most popular option remains the mask from Mortal Kombat.

Mortal Kombat paper scorpion can be made using a ready-made template:

A paper scorpion mask made in accordance with the stated design will be an excellent basis for a cosplay costume. You can detail the product through the use of decorative elements and details.

To complete the look you will need a kunai, which can also be made from paper. You can get a detailed master class by watching the following video:

Source

How to weave a scorpion from beads

Our master class will make a beaded scorpion look voluminous, but this does not mean at all that such a figurine will be beyond the capabilities of beginning needlewomen. In fact, the weaving pattern is quite simple and even a child can handle it.

So, before we get started, let's first prepare all the necessary materials and tools:

  • wire (0.2 mm);
  • thin fishing line (we will use it to sew our figurine);
  • 2 beads No. 6 yellow for the eyes;
  • black beads number 10;
  • brown beads No. 8;
  • wire cutters

Let's start our master class:

In order to weave a scorpion with our own hands, we will need to use the volumetric weaving technique. First, we string beads onto the wire in the same sequence as in the photo:

Then we will have to pass the second tip of the wire through the 3 outer brown beads located at one end of the working “thread”.

By tightening the wire, we will see that we have the lower and upper tier of row 1:

After this we will begin weaving the claw. To do this, we will need to collect 11 brown beads and 5 black beads onto one end of the working “thread”.

Having done this, we will have to hold the last black bead with our fingers and pass the wire through the remaining 4 beads.

Then, having tightened the working “thread”, we will need to string 5 more beads onto it.

After this, you will again have to hold 1 bead and pass the wire first through 4 black beads, and then through 11 brown beads, so that it ends up at the base of the body.

Without changing the scheme of actions, you need to weave the second claw:

Now we need to make the second row of the top tier. To do this, we string beads onto the wire and pass the second tip of the working “thread” through them: Making the lower tier: Now we weave the upper tier and turn one of the ends of the working “thread” into a foot.

The pattern of weaving the paw is practically no different from how we made the claw:

We make the second leg in a similar way:

We weave the lower tier from six brown beads:

In general, the pattern of a beaded scorpion is a bit like the weaving of a spider.

We continue weaving the body:

The next row will be a little like the third: create the top tier, then the legs and then the bottom tier.

And another row with paws:

Then we continue weaving the body and repeat the rows with the same number of beads:

At this stage, volumetric beading can be considered complete. Now you must make a ponytail using the parallel braiding technique:

Our master class is coming to an end: all you have to do is secure the wire and stitch the scorpion with fishing line. In order for a beaded scorpion to look more realistic, you need to give its legs, claws and tail the desired shape:

Features of paper scorpion

Many fantasy fans may know exactly how to make a paper scorpion mask in the Mortal Kombat style, but not many are aware that there are other types of crafts. You can make a magnificent three-dimensional figure of a real Scorpio, make a beautiful picture of the zodiac as a gift. And all these crafts are formed either from paper or cardboard.

Examples of crafts in the form of a scorpion

Options for finished paper scorpions that are most popular:

There are many more options and types of crafts of this kind that can amaze the imagination.

Gallery: photos of finished crafts

Scorpion

Children are always attracted to something unusual and mysterious. They watch films with all sorts of monsters. But it’s still better to introduce children to the world around them not through scary movies, but with the help of crafts like these. Look how cute the scorpion turned out!

How to make a scorpion out of paper. Take a piece of paper. Make a square. Fold it diagonally.

Fold the piece of paper so that the fold is on the right.

Bend the upper left corner downwards.

Unfold the triangle obtained on the right with a “cap” so that the fold you make is on top, right in the center.

Turn the workpiece from left to right to the other side.

Unfold the piece of paper on the right side and fold the fold to the middle.

Fold the corners as shown in the photo and unfold again. These are your auxiliary lines.

What kind of craft can be made from metal?

Having thought carefully, the owner decides to present a piece of the unusual to his home, but the question immediately arises: should he buy it or make it himself? Of course, do it yourself, because doing something with your own hands is much more pleasant and more profitable from a price point of view.

Today, forged ornaments for grilles, doors or fences are in fashion; forged animals, a mysterious owl, or a Russian bear also look great in the garden. Ladies prefer forged bouquets, and a rose created with their own hands will surprise anyone.

Required materials and tools

When making any craft, paper is used. It can be a regular white or colored base. To strengthen the structure or create a more durable figure, cardboard of different hardness is used.

Additionally, you will have to use paints, glue and scissors. To make the composition more complete and “reliable”, you can use decorative elements - beads, ribbons, small plastic stones. To determine dimensions and prepare sketches (diagrams, drawings), a simple pencil and ruler are used.

Step-by-step assembly of a scorpion using modular origami technique

You can get a three-dimensional figure of a scorpion with detailed detailing by assembling it using the modular origami technique. In this case, you can use a variety of colors to assemble the modules, but more often the assembly is made from white paper.

Master class on making roses

And materials. List of basic tools:

Attention. Do not forget about safety precautions when working with these tools! Be sure to wear gloves and a welding mask when working.

We take metal cutting scissors and cut out thirty rose petals (thirty petals will make the bud seem more magnificent). You need to move in cutting from small to large, that is, from 15 mm to 80 mm. Your rose should not be prickly. Therefore, a sharpening stone will help smooth out all the unevenness of the petals.

After forming a complete flower, we weld the spikes and clean off the excess with a grinder, clean the seams and cover with a layer of protective paint - the craft is ready.

Some interesting facts

Metal is the most ancient mineral of interest to humans. He mined it, forged it, and then a new fence or another forged deer lit up the smile of passers-by.

During the rapid introduction of Hollywood films and the development of artificial intelligence, the topic of androids and the like became relevant. Although the world is far from the rise of the machines, it is always possible to forge a transformer, say, for an exhibition.

Vitaly Yashkovich from Krasnoyarsk became famous throughout the city for his miracle robots. His collection includes such titans of world cinema as: Megatron, Terminator T-200 and T-800, Star Wars androids, as well as droids from cartoons. The owner himself claims that he will not sell his robots to anyone, they say, he created for the soul

You too create, because the world is unidentified and multifaceted. Give him something new and unusual.

Source

How to make a knife from standoff 2 from kunai wood

The kunai is an ancient tool. It became popular in Japan during the period of internecine wars. It was then that warriors or shinobi needed a tool that could help not only in everyday life, but also in battle.

Historians claim that a long time ago such an object was used exclusively as a tool for digging, hammering or breaking something. If the kunai was supplemented with a rope, then it could be used to help climb a wall, tree, or descend, then it resembled a rock hook.

Since ancient times, the kunai has been an agricultural tool. In a fight it was used, just like any other iron sharp object - a direct attack in close combat or throwing.

In the skillful hands of a ninja, it became a multifunctional weapon. The warrior dug a tunnel with it, used it as a chisel to strike out fire, broke out locks and climbed the wall, clinging to it like a hook.

Kunai came in all shapes and sizes. Certain types of peasant implements were already used in ancient times for sawing something out.

That is why today it is almost impossible to determine the original appearance of the instrument.

The throwing knife resembles a skeletal dagger-shaped weapon. Its handle is made without an overlay, but with a winding. The shank is made in a ring shape, especially for comfortable insertion of a finger into it.

Exploitation not for everyday purposes, but as a weapon was preserved not only in the ancient world.

Thus, the Japanese scientist Nava Yumio said that during the Patriotic War, one platoon of Japanese ground warriors brilliantly controlled kunai in hand-to-hand combat.

Listen, I have a problem, I have an iPhone because of this the phone cannot restore a secure connection, leave another link. If you want to clarify something, please contact me!

Legal ways

  1. Donat, you can just throw money into the game and buy any skin. But it’s not free, and we’re only interested in free ways to get a cool knife, so let’s move on.
  2. Get it out of free cases, but, again, we all understand perfectly well that the chance of dropping a butterfly knife or rare karambit is approximately 0.0001%.
  3. The easiest way is to start earning free cases and open them, and then sell them on the market for gold. So, in a month or two (depending on your luck, what you find in the cases) you can collect enough for any knife.
  4. If you're lucky, you can grab a free promotional code for a knife.
  5. Ask a friend if he has one.

Using cheats, hacked version. But keep in mind that you can get banned quite easily for this.

To be honest, I don’t understand at all why everyone is so chasing rare skins. After all, they do not provide any advantages in the game, except for the envy of other players. In Standoff 2 matches, everyone is equal and even the most expensive skin will not add your skill. I play to improve my game constantly and for fun, not just to show off in front of others.

I have long noticed that a player with a rare skin gets a lot of attention on the map, especially at low ratings, and opponents try to kill him first. So, I recommend playing for fun or moving up the rankings and trying to play better and better than chasing some skins.

Who agrees with my opinion - write in the comments, let’s find out how many of us there are, I hope I’m not the only one. Or write why you so want to get a rare knife.

Expert opinion

Strebizh Viktor Fedorovich, leading construction foreman

Thank you, I want to make knives from standoff and I went on tilt because I couldn’t do it, and now you did everything fine, thank you very much, you instilled confidence in me, let’s say. If you want to clarify something, please contact me!

Paper Dragon Pepakure\Papercraft

I was on a business trip, in my free time I decided to occupy myself a little, as a result, in 2 weeks I glued a dragon out of paper, the first major work, so, I want to not stop there and bring it to perfection, so to speak, but here I need the help of paper veterans) how to strengthen model and how best to paint it? I read that you can coat it with epoxy, but I’m afraid that the model might shrink, so I took the paper for drawing. What do you advise?

If you don’t have a cat, but really want one, just make one out of paper)

Self-isolation is not a reason to be sad, quite the opposite, time is learning something new, I recently got such a cat

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]