The sale has ended, but good prices, discounts and promotional codes are still valid on many products.
Let's talk about the best of them - those that are needed in every home. And not only for the home craftsman.
To make your purchases cheaper, use our promotional codes for new customers:
► iphonesru400new - 400 rubles discount when purchasing over 800 rubles. ► iphonesru500new1 - 500 rubles discount when purchasing over 1000 rubles. ► Admitad400new - 400 rubles discount when purchasing over 800 rubles. ► Admitad500new1 - 500 rubles discount when purchasing over 1000 rubles.
Or for all categories:
► iphonesru100all - 100 rubles discount when purchasing over 1000 rubles. ► iphonesru150all - 150 rubles discount when purchasing over 1500 rubles. ► iphonesru200all - 200 rubles discount when purchasing over 1600 rubles. ► 11iphonesru100all - 100 rubles discount when purchasing over 1000 rubles. ► 11iphonesru150all - 150 rubles discount when purchasing over 1500 rubles. ► 11iphonesru200all - 200 rubles discount when purchasing from 1600 rubles.
They work only for purchases with delivery to Russia and the CIS countries (not including Ukraine), valid until December 31.
Don’t forget to check out our Telegram channel: there are several original and no less useful surprises here.
Crafting table
Dimensions of the workbench
The height of the surface of the tabletop should be such that a worker can operate tools and equipment while standing. The workshop owner determines the height of the workbench himself - according to his height. The height of the desktop ranges from 75 cm to 80 cm.
The size of the countertop is determined by the area of the utility room. The table should not impede free passage around it.
Workbench material
- Tree. A wooden table is often used. The workbench is made of timber and boards. The legs of the table are secured with diagonal crossbars for reliability.
- Metal. The most reliable workbench design is a workbench welded from a metal profile. Manufacturing a welded product requires having a welding machine and experience working with it.
The table top is made in the form of a shield from knocked down boards using pieces of timber. The shield is rested on the legs of the table and fastened with nails or screws. The connection parts are made from angle steel.
The options for assembling a wooden workbench are different, but they have one thing in common - the table structure must be stable and withstand static and dynamic loads.
If the surface of the workbench will be subject to accidental impact from cutting and sharp tools, then the tabletop is covered with tin or a metal sheet is placed on top.
The supporting frame and table legs are welded from steel angle and strip. For auxiliary parts, pieces of reinforcement are used.
The table top is made of metal sheet, 8 - 12 mm thick. A thick sheet will significantly increase the weight of the workbench, which will make it difficult to move.
Vargan
The Jew's harp is a rather controversial instrument. Some people haven’t even heard of it, but those who have heard it certainly did not remain indifferent to these bewitching, and sometimes frightening and mystical sounds. It is not for nothing that the harp is associated with northern shamans and immersion in a special state of consciousness, because many people notice that playing the harp helps to relax, disconnect from the hustle and bustle and enter a state of light trance. The Jew's harp, like no other instrument, is great for improvising a special expression of feelings through sounds. When playing, the jew's harp is pressed to the teeth and held with the hand so that the tongue vibrates freely. It is the tongue that is the source of sound, which is amplified by the oral cavity, which serves as a resonator. Adjustment of the pitch and timbre of sound occurs through articulation, breathing and special techniques.
;
Stool
Making a stool with your own hands is quite simple:
- 4 supports, 50 cm long, are made from timber 40 x 40 mm.
- The legs in the middle of the length are fastened with crossbars.
- Grooves are made in the supports using a chisel.
- At the ends of the transverse planks, protrusions are cut out using a chisel to fit the grooves.
- The protrusions are lubricated with wood glue and inserted into the grooves.
- While the glue dries, the supports are tightened with a belt.
- The seat is cut out with a circular saw from a wide board 30 mm thick.
- A seat measuring 300 x 300 mm is nailed or screwed to the legs of the stool.
Singing tree in Barnley
This tree, located on the top of Lancashire, in England, is not at all of natural origin. Its author is architect Mike Tonkin and Anna Liu. The tree is a musical sculpture made of iron pipes of different diameters and lengths, folded in a spiral shape. The sound is produced by the wind and is heard over long distances.
Mini vise made of metal loop
When performing small operations, small parts often need to be clamped. To do this, use a mini vice made from a one-piece door hinge.
Matching holes are drilled in both hinge flaps.
A bolt of suitable diameter is threaded through them. On the other side, a wing nut is screwed onto the bolt thread. The parts are inserted into the opening between the doors and clamped by tightening the nut. The device can be used as a clamp.
Universal key for plumbing
The gadget is incredibly useful in everyday life. Allows you to unscrew and tighten nuts on faucets, sinks, sprayers, taps. The design is simple, but versatile and well made.
You have to hold a rather long plastic handle in your hands, and the mechanism turns the valve hidden inside.
The handle itself allows you to climb into the most inaccessible places and perform the necessary actions with little effort. The metal valve is made of aluminum and fits different nuts. The thing is incomparable, you can install and clean taps with it every day. I definitely recommend everyone to buy it.
