Do-it-yourself washing vacuum cleaner

Detailed instructions on how to make a washing vacuum cleaner with your own hands from an ordinary one. Most people do not need a washing vacuum cleaner for daily cleaning. It is useful when doing general cleaning or when you need to wash away dirt and stains.

You can make a washing vacuum cleaner with your own hands from an ordinary one. The operating principle of such a vacuum cleaner and its design are the same for both store-bought and home-made models. It is widely described on the Internet. In addition to the instructions, there will be useful tips for manufacturing and a comparison of a homemade washing vacuum cleaner with a store-bought one.

To make a washing vacuum cleaner from a regular one, you need to install a water filter in the path of the air flow. For it we need a larger container, an angle and a short sewer pipe, a corrugated diameter suitable for this pipe. Ideally, you can get a hose from an old vacuum cleaner as a corrugation. It is quite soft, folds well and is durable - it will not be crushed by a vacuum.

All parts for washing vacuum cleaner

Ultimately, a homemade washing vacuum cleaner cost me 90 rubles (I had a paint bucket and a glue gun for 50 rubles). It took 40 minutes.

The first thing you need to do is measure the diameter of the part of your vacuum cleaner that is inserted into the nozzles and extension pipes and buy a tube and an angle of the most suitable diameter. This or a little more.

A nearby store only found diameter 40, so then I had to seal it with electrical tape. Some find ones that fit perfectly.

We saw off the pipe so that it does not reach the bottom, about a third of the can.

Preparing a pipe for a washing vacuum cleaner

Mark the lid and cut out round holes in it with a knife with a sharp tip. The holes must be cut carefully, the diameter is exactly for the pipe or slightly less.

Cover markings

It will be easier to cut if the plastic is heated. Near the holes, towards the circle, the lid should be made rough, ideally with sandpaper. The same needs to be done with the tubes, next to the lid on both sides. This will allow the glue gun or glue to adhere better.

Inserted tubes

Fill the inserted tubes around the perimeter with a glue gun. If there is some special glue that can withstand the movement of the tubes, even better.

Taped tubes, the water filter for the washing vacuum cleaner is ready

We make a fabric filter on a short pipe. It will prevent drops of water from entering the vacuum cleaner. On the Internet, such a filter for a washing vacuum cleaner is made of mesh, but fabric is more reliable.

You can attach it with Chinese electrical tape.

At first glance, winding electrical tape onto fabric and attaching it to plastic is not a good idea, but when winding it, I pulled it well and it gave a good result; after several washes this unit was not damaged at all.

Filter protecting the vacuum cleaner from moisture

We insert the hose from the vacuum cleaner into the short pipe, the purchased corrugation into the long one, and attach the nozzle without bristles from the vacuum cleaner to it. I found a very successful one - medium size. We carefully seal the connections using electrical tape.

Nozzle

All hoses

The washing vacuum cleaner works as follows. The water is sucked in by the hose, since the suction part has almost direct contact with it and enters the reservoir (water filter) through a long tube. Through a short tube, the air goes further into the vacuum cleaner. In this case, the short tube is quite far from the water; air cannot lift the water into the tube.

Close the lid of the bucket tightly and carry out the first tests.

The result is excellent. The water is in the tank.

Water in the tank of a homemade washing vacuum cleaner

The filter is completely dry - there is only dirt on it that was in the jar and managed to stick before water got into it.

The pipe inserted into the vacuum cleaner is naturally also dry.

Pipe branch

The next photo shows water after cleaning just the seat of a computer chair. The result of a homemade washing vacuum cleaner is impressive and does not differ from the result of a purchased one.

The result of a homemade washing vacuum cleaner: The water is very dirty

Besides this, I managed to do it on my own, without chemicals. cleaning, getting rid of stains on the light upholstery of the sofa and chairs that the child left during the first year of life. The sofa was covered in stains, but became as good as new. Here, as with the chair, vanish helped a lot. Supposedly you can get by with just one, but I couldn’t.

It cannot be completely removed from upholstered furniture with a regular vacuum cleaner. A persistent smell remains, and even after passing through a homemade washing vacuum cleaner several times, first there is dirt in the tank, then abundant white foam on the surface of the water, and only then water. Several recommendations and observations that I came to while using a washing vacuum cleaner.

You should not make washing vacuum cleaners from a 3-liter can, there is not enough space, water will get into the outlet tube. Like a factory one, a homemade washing vacuum cleaner will not suck out water if it has gone deep into the upholstery. I cleaned the sofa as follows. I applied vanish and waited according to the instructions. Rub special stains with a viscose cloth.

When it was time to clean, I mentally divided the surface into small squares. He poured clean water into the basin. I wet the rag generously with water without squeezing, wet the surface and immediately sucked up the moisture with a vacuum cleaner. A factory vacuum cleaner works similarly, only water (detergent) is supplied automatically, followed immediately by the suction nozzle.

There is no difference in suction power and effect. I repeated this several times, changing the water in the basin until it stopped becoming cloudy from the detergent. The water needs to be emptied from the bucket more often; as it is filled, the efficiency decreases.

I had a hard corrugation, the bucket often turned over, the filter became wet, but no moisture appeared in the vacuum cleaner hose. The bucket squeezes quite a bit at maximum traction, there’s nothing wrong with it, it doesn’t affect the work, then it straightens with your hand.

The design was enough for a sofa, a computer chair, then the electrical tape comes off from the nozzles, from the lid of the glue gun, the effectiveness decreases. But the electrical tape can be rewound, the glue is restored if you heat it with a hair dryer, even faster if you use a construction hair dryer.

A homemade washing vacuum cleaner does not take up space - you can throw away the bucket or store something in it. There are no tubes of hoses and a bunch of nozzles lying around.

An additional bonus is that you can use it without water to remove construction waste, clean your car, etc.

A conventional vacuum cleaner quickly clogs and loses traction, but this one works like a cyclone - heavy debris remains in the bucket without clogging the dust bag and reducing traction.

Source: https://lopit.ru/mouchuiy-pilesos/

Best washing vacuum cleaner: top 8 models of 2022

Washing vacuum cleaners greatly simplify wet cleaning in the house.
They are indispensable for high-quality care of carpets, upholstered furniture, and car interiors. Household appliances of this type vary in functionality, suction power and many other parameters. We decided to make a detailed review of these devices and, based on technical characteristics and customer reviews, choose the best washing vacuum cleaner of 2022 and 2022. Nikolay Voltsev, an expert at the center for independent assessment of goods “Tovaroved”, helped us create the top list.

Due to the wide range, it is often difficult for the buyer to make a choice. The cost of models with similar functionality may differ several times.

The list includes the most optimal devices in this regard:

1) ATVEL F16

2) Thomas Aqua Pet & Family

3) FIRST AUSTRIA 5546-3

4) KARCHER Puzzi 8/1 C

5) ARNICA Hydra Rain Plus

6) Thomas TWIN T1 Aquafilter

7) Bosch BWD41740

Nilfisk-ALTO BUDDY II 12

Safety precautions

When making your own device, you can purchase factory-type parts and spare parts to save time and effort. But when installing filters, it should be taken into account that HEPA filters are not suitable for a homemade device, since such products can trap small dust particles in the pores of the filter itself. All this leads to the filling of filters with debris, and, consequently, the suction power will gradually decrease. The filter will be impossible to clean, since it will be difficult to blow out the dust, and when washed off, a rotting process may occur. Bacteria can also develop and cause an unpleasant odor during operation.

If a simple vacuum cleaner does not have a filter, then all this can lead to the opposite effect. If the vacuum cleaner does not have a filter, then the device must include an ideal cleaning system, and it will be very difficult to make one at home. Therefore, if a person needs a vacuum cleaner without a filter, then it is better to purchase it in a store rather than make it yourself. You cannot use the device if it is clogged with dust; in this case, you need to turn off the power and clean the device.

To optimize the operation of the device, you can connect 2 hoses. The first hose is for suction, and the second is for blowing. The second one can thoroughly clean different areas and hard-to-reach surfaces, since the blown dust will immediately be collected using a retracting hose.

To carefully clean stoves and fireplaces, it is recommended to use an ash vacuum cleaner. If you clean such places with a simple household vacuum cleaner, the device will quickly deteriorate. The filtration process will not be able to clean large ash particles, as a result, burning embers can burn through the garbage bag, heat up and deform the plastic body of the device. A simple vacuum cleaner will not have enough suction power to efficiently remove ash.

Let's look at some additional conditions for using homemade vacuum cleaners.

Do not press the nozzle firmly against the area to be cleaned so that the vacuum cleaner does not heat up and reduce the quality of cleaning. The device must have access to air. During the work, you should also not push the nozzle sharply; you need to clean all places carefully and evenly.
If the vacuum cleaner is not a detergent, it must not be used to clean liquids.
If you hear an extraneous sound during operation, you need to turn off the device and check it.

These rules must be taken into account so that there are no problems with the device and it does not break.

How to make a vacuum cleaner from a bottle with your own hands, see the following video.

The use of any materials without our prior written consent is prohibited.

The best washing vacuum cleaner for home ATVEL F16

Type of cleaning: dry and wet
Power type: wireless
Suction power: 150 aw
compactness and absence of wire;
air humidification and filtration;
self-cleaning after cleaning.

Atvel F16 is a representative of a new direction in household appliances - cordless washing vacuum cleaners for dry and wet cleaning. This type of vacuum cleaner is lightweight and highly versatile. Due to its placement on a compact base, it is always ready for use, for example, it can quickly pick up dirt from shoes in the hallway. It also does a full-fledged washing cleaning with the simultaneous collection of dry garbage.

These advantages make cleaning much faster. After all, the model is lightweight, independent of the wire, and performs dry and wet cleaning in one pass.

Clean water from the reservoir is supplied to a roller made of a composite material. The roller rubs the floor, removing dirt. The waste water is squeezed out into a garbage container, where other debris also ends up. An air flow power of 150 W is more than enough for this.

A HEPA12 class filter is responsible for final air purification. After cleaning there is no need to disassemble and wash the vacuum cleaner. This will be taken care of by the self-cleaning system, which will wash the roller and pipes. All you need to do is drain the dirt from the container into the toilet, fortunately this is very easy to do.

Atvel F16 is the best washing vacuum cleaner for people who value their time, convenience and strive to maintain perfect cleanliness even in small things.

Reviews

Buyers note the ease and convenience of use, good assembly, and quality of cleaning.

Pros:

lightness and maneuverability;
no wires;
constant readiness to work;
washing and dry cleaning;
self-cleaning after work;
high build quality;

Minuses:

lack of attachments for cleaning furniture.

Other manufacturing options

In addition to the methods described above, there are several more solutions on how to make a vacuum cleaner yourself.

From the cooler

To clean hard-to-reach surfaces, you need to use a mini vacuum cleaner with a 12-volt power supply. You can use a battery or a power supply as power.

You can make such a device yourself at home. To create it you need the following materials and tools:

computer cooler;
mains cord;
switch button;
lattice;
cloth for dust collector;
soldering iron

So, to create a mini-vacuum cleaner from a cooler, you need to follow the following diagram.

Using a soldering iron, you need to connect the cooler to the power cord and to the power supply.
To make it easier to use the device, you need to make a switch on the cord.
On the side where dust is sucked in, it is necessary to strengthen the grille to prevent foreign objects from getting caught.
You need to make a special bag using dust-proof fabric: to do this, you need to cut a strip, fold it in half and sew it on both sides, you can supplement it with stuffing material for pillows. Then you need to make a side and put on an elastic band.
Then the dust collection bag is attached to the back panel of the cooler. That's it, the mini vacuum cleaner is ready to go!

From a barrel

You can also make a vacuum cleaner using a barrel with a volume of 210 liters. You can use printing ink barrels, as they have sealed lids and locking rings. In addition, you need to use air hoses from an old vacuum cleaner.

Home vacuum cleaner Thomas Aqua Pet & Family

versatility;
removal of odors and allergens;
high-quality German assembly.

Thomas Aqua Pet & Family is a vacuum cleaner for the home with a wet cleaning function. With its help, you can collect wool, wash parquet and laminate flooring, and wet clean carpet and textile upholstery. Effectively removes stains left by pets. In addition, it not only washes, but also dries surfaces.

Its effectiveness is confirmed by a certificate - the device can be used to clean apartments where people with allergies live. After passing through the filters, the air is cleaned of dust and pollen.

The container is removable and located outside the case. Thanks to this design, it is easy to fill with water even during operation. It is equipped with various attachments, including a wide thread lifter and a turbo brush, which carefully collect fur and hair without clogging.

Consumes 1700 W/h, suction power - 325 W.

Thomas Aqua Pet & Family is the best cleaning vacuum cleaner for a home with a large family with children or furry pets. We also recommend it for allergy sufferers, since the filter is capable of purifying the air from pollen by 100%, from dust by 99%.

Reviews

Buyers note the thoughtful design, the many attachments included, the presence of a turbo brush, and the feeling of freshness after putting things in order. The device is convenient to move around the apartment.

Pros:

removal of complex contaminants, wool;
deep and high-quality cleaning of textiles and carpets;
maneuverability;
a large selection of brushes for different purposes;
high quality of assembly and components;
compactness;
ease of maintenance (easy to disassemble, wash).

Minuses:

high cost;
increased noise level.

Upgrade options

There are no boundaries for perfection. Upgrading a robot vacuum cleaner can affect both mechanics (wheels, installation of additional rotating brushes) and electronics (replacement of the Arduino board, sensors, charge controller, etc.).

It is possible that during operation the owner of the vacuum cleaner will want to paint the body; aerosol nitro enamels are suitable for this. Or replace the software, adapting it to the Android environment, so that the vacuum cleaner becomes even smarter. And it could be controlled using a smartphone. There are already ready-made ideas and solutions. Or you can come up with something of your own; the Arduino platform was created for this.

The best inexpensive wet vacuum cleaner FIRST AUSTRIA 5546-3

multifunctionality;

large container for collecting garbage;
easy to clean.

FIRST AUSTRIA 5546-3 is an inexpensive but good washing vacuum cleaner with a turbo filtration system with a power of 1400 W. Equipped with double water filter, aqua filter, water lock. Dust is collected using a convenient steel telescopic tube. The set includes replacement attachments for cleaning the entire house.

A modern multifunctional vacuum cleaner is used for dry and wet cleaning. The power of 130 W is enough for fast, comfortable work. There is a humidification function. Does not leave a dusty smell, the air remains moist and fresh. The volume of the dust collector is 6 liters, which is enough to clean the entire apartment at once.

The model, which is included in our rating of wet vacuum cleaners, can be recommended to those who are looking for a budget but high-quality option.

Reviews

According to customer reviews, the device has a well-thought-out dust collector design, high power, an aqua filter, good functionality, and many attachments. It is easy to maintain.

Pros:

large container for water;
easy to disassemble and assemble;
power;
ability to process hard and soft surfaces;
convenient to move during work;
affordable price.

Minuses:

very noisy;
bulky.

How to make a detergent?

Using the instructions, you can make a washing device from a simple vacuum cleaner. Usually people use a washing machine very rarely. This device is intended for general cleaning of the house or when you need to wash away dirty spots.

The step-by-step instructions for creating the device are as follows.

Where there is air flow, you need to fix the water filter. The following materials are needed for the filter: a container, an angle, a short pipe for sewage, a corrugation with a diameter suitable for the pipe. A hose from an old vacuum cleaner is suitable as a corrugation. Since the hose is very soft, it will roll up well.
It is necessary to measure the diameter of the place where you need to insert the nozzle and extension tubes, and purchase an angle that can fit this diameter. Then you need to saw off the tube so that it cannot reach the bottom.
Using a knife, you need to cut round holes on the lid. The diameter of the holes must be even and suitable for the tube.

The best professional washing vacuum cleaner for cleaning KARCHER Puzzi 8/1 C

powerful spray-suction device;
deep cleaning of textile surfaces;
easily copes with large volumes of work.

KARCHER Puzzi 8/1 C is one of the best professional washing vacuum cleaners for cleaning and individual use. It deeply cleans carpets, rugs, upholstered furniture, removes stains, unpleasant odors, and returns a fresh look to treated surfaces.

Equipped with a powerful suction turbine that minimizes residual moisture. Compared to competitive analogues, the residual moisture level is 63% lower, and cleaning takes 2 times less time.

It has compact dimensions and light weight (9.8 kg), which makes it easy to carry and clean car interiors. If you purchase additional components, you can use it for washing windows, tiles, and other surfaces.

It is equipped with a narrow hand nozzle and a suction hose with a 2.5 m elbow. There is a liquid collection function and a light indicator for when the dust container is full.

The model is successfully used by cleaning companies. Can be recommended for a home with an abundance of carpets and upholstered furniture.

Reviews

Buyers note the high power of the device, the quality of cleaning, the removal of difficult stains, easy movement, ease of maintenance, high-quality assembly from a German manufacturer, and the presence of an indication of the fullness of the garbage container.

Pros:

very powerful;
low level of residual moisture;
washing;
easy to move;
deep cleaning of various types of carpets.

Minuses:

high price.

We turn a car vacuum cleaner into a washing machine

Dry cleaning of a car interior is a fairly expensive service, and therefore many car owners prefer to carry out this procedure themselves, in their garage. The first thing that is required in this case is a vacuum cleaner capable of collecting moisture from the car’s upholstery. But if such a device is not at hand, you can design it yourself. If the power of one vacuum cleaner seems insufficient to effectively collect water, you can use two units of equipment in parallel.

To do this you will need:

plastic canister with a durable frame of the required volume;

sealing rubber;

sewer pipe, 2/3 the size of the tank height and 40 mm in diameter, which corresponds to the diameter of standard hoses;
hose;
sealant;
swivel elbow;
splitter

Assembly is carried out as follows:

You will need two holes in the container for collecting liquid: the neck of the canister can be used as one of them, and the second can be made independently, taking into account the diameter of the sewer pipe (you can use the melting method).
To seal, insert an o-ring into the neck of the container, and then a rotary pipe.
One end of the pipe is already equipped with a rubber seal - it is from this side that a hose with a nozzle is inserted into it, which will collect water.

How to choose a washing vacuum cleaner

What are the benefits of devices with wet cleaning function? They replace a regular mop and clean carpets and textiles efficiently. Most models have filters that remove pollen and dust particles from the air. After wet cleaning, the house shines with cleanliness and freshness.

However, it is difficult for an ordinary buyer to understand how to choose a washing vacuum cleaner for an apartment among a wide variety of products. To make your purchase beneficial, we recommend that you familiarize yourself with information about what a washing vacuum cleaner is and what functions it performs.

All devices of this type operate according to the same scheme. At the first stage, water with detergent and a foam absorber is poured into the container. During operation, the liquid is sprayed, wetting the floor or carpet. Then, under the influence of rarefied air, it is collected and moved to the waste bin. After cleaning, the entire surface remains clean, without streaks, dirt, dust, and wet debris are removed.

Which washing vacuum cleaner is best for the home will be determined by the following indicators:

Power. There are 2 characteristics: electricity consumption and suction. The second has to do with cleaning speed. If the house area is large, or you need to clean it daily, then it is better to choose models with an indicator of at least 300 W.
Types of cleaning. An alternative is possible: combining wet (with water) and dry (dust bags) types in one device, or only the first option. You should also pay attention to whether the device can be used on walls, on wooden floors, or for cleaning sofas.
Storage tank. For wet cleaning of a house with 2 rooms, you can opt for vacuum cleaners with tanks of up to 4 liters. For multi-room apartments and houses, those with at least 8 liters are more suitable. Some models have reservoirs located on the outside of the body, making it easy to add water and the volume of the container is not as important.
Filters. Once in the container, the dust gets wet and settles. But some part (up to 15%) rises. Above the tank there are more complex filtration systems that can clean the air of dust particles by 100%.

Suction tubes. Can be made of plastic or metal (aluminum or steel). The former are less reliable, but cheaper. The most durable are metal telescopic tubes, which can be easily extended to the required length and folded when the work is finished.
Nozzles They are used for certain purposes: washing floors, collecting animal hair, cleaning carpets, textiles, etc.
General characteristics. It is worth paying attention to the dimensions, weight, cord length, ease of maintenance (assembly, disassembly), noise level.
Manufacturer. The top best companies include Zelmer, Thomas, Karcher. American, German and Russian goods are presented on the market, but the assembly is most often Chinese. When choosing a specific model from a specific brand, rely on reviews. They will help you evaluate the price-quality ratio.

Thus, for large houses, the choice of washing vacuum cleaner should be opted for models with high suction power. If there are pets in the apartment, then the kit should include a turbo brush, and allergy sufferers need to buy devices equipped with an additional cleaning system. If you take into account all the nuances, then putting your house in order will become quick and comfortable.

Table with an overview of the technical characteristics of the models

Homemade washing vacuum cleaner: the manufacturing process from a conventional apparatus

Before you make a washing vacuum cleaner from a regular one, it is important to understand what tools are needed for the job and what needs to be taken into account

Tools and Supplies

Materials required for self-construction:

a container with a lid (for example, a three-liter jar);
straight sewer pipe, diameter 32 mm;
elbow (90°) with the same section;
corrugation, suitable in diameter to the pipe, 1 m;
a small piece of a bicycle tube with special holes;
nozzle without bristles;
liquid bottle with sprayer;
insulating tape.

Tools:

glue gun,
knife/scissors to cut round holes for pipes in the lid.

Assembly order

Assembly takes place in several steps.

First, prepare the pipe: its length should be one third shorter than the height of the tank.
Two holes are cut out on the lid, corresponding in diameter to the prepared pipe sections. To make cutting easier, the lid should be heated.
Use sandpaper to sand the surface near the holes on the lid and pipe (to help the glue adhere better).
A piece of a bicycle inner tube with holes is pulled over a piece of straight pipe so that the rubber restrains the speed of water flying into the tank, otherwise the liquid may get into the outlet of the tank and damage the vacuum cleaner.
Insert the pipes into the lid and glue them together.
Attach the filter to the pipe with electrical tape.
The elbow (outlet) accommodates the bell of the vacuum cleaner hose; the straight pipe (inlet) is connected to a corrugated hose, on which there is a nozzle for collecting water. If its base is smaller in diameter than necessary, you can increase it with electrical tape.

Assembly is complete.

To check how the equipment works, you need to select an object that requires cleaning. It could be a piece of upholstered furniture that needs dry cleaning.

Testing:

Pour clean water into the bottle, add detergent;
apply the solution with a spray tip to the surface of the selected furniture;
turn on the device;
pressing, move the tip up and down repeatedly over the area of contamination;
At the same time, monitor the condition of the tank, in which water flowing from a straight section of pipe should not enter the elbow.

In case of strong splashes, the holes in the bicycle tires must be made smaller or the power of the homemade equipment must be moderated. If there is insufficient pressure, there may be an air leak. To eliminate it, you need a tighter lid or a seal at the junction of the corrugation with the tip and with the straight pipe. You can seal it by wrapping electrical tape.

The method for cleaning the tank is simple:

remove the cover,
pour out the waste water,
rinse.

Note! Servicing a special vacuum cleaner from a store requires much more time.

Multifunctional ARNICA Hydra Rain Plus for carpets and upholstered furniture

The ARNICA Hydra Rain Plus model is ideal for allergy sufferers. The aquafilter completely absorbs dust, preventing even the smallest particles from flying back into the room.

Has high suction power - 350 W. It perfectly cleans tiles, laminate, linoleum, textile upholstery, is suitable for cleaning carpets, removes wet debris, and is capable of sucking up to 10 liters of liquid. There is a vacuum treatment function for home dry cleaning of soft toys, bedspreads, and bed linen.

Dry and wet cleaning are not all the functions of ARNICA Hydra Rain Plus. It is able to moisturize, purify, and refresh the air. It is enough to pour water and turn on the device for fifteen minutes. If you add flavoring to the water, the room will be filled with a pleasant aroma.

The vacuum cleaner can be recommended for a large house, for people with allergies, and for families with small children, where cleanliness and humidity of the air are important, and daily cleaning is carried out.

Reviews

Buyers write that cleaning an apartment with its help is quick and easy, it has attachments for carpets and upholstered furniture, and is easy to clean after use.

Pros:

versatility;
high suction power;
excellent filtration system;
a large number of removable attachments;
simple maintenance (easy to disassemble, wash).

Minuses:

the cable does not rewind automatically;
Sprays water unevenly;
noisy.

How to replace branded liquid for a washing vacuum cleaner

If you constantly use a non-recommended composition, even with low foaming, the engine will gradually deteriorate, filters, ejector and pump tubes will become clogged. The vacuum cleaner will lose performance. Housewives, through trial and error, found how to make their own liquid for washing vacuum cleaners. We will give their recipes, but we advise you to approach the composition critically, so as not to spoil the upholstery. First, you need to carry out a test treatment on an inconspicuous place to make sure that the composition cleans but does not spoil the appearance.

If you dissolve washing machine detergent in water and add a drop of vinegar, alcohol or vodka, you can create foam and get a disinfecting effect. But after that it is necessary to thoroughly clean the instrument cavity.

Another solution for a washing vacuum cleaner can be prepared with your own hands from dishwashing liquid and salt. The ratio of components is 1:1. First pour shampoo into the prepared water, stir, then pour in salt. Instead of salt, you can use starch and a little sunflower oil to create a film on the surface.

What else can you put into a washing vacuum cleaner? Regular washing powder with a commercial defoamer will clean effectively, but will not remove foreign odors. A defoamer will also be required if the carpet was previously cleaned manually with detergent powder. Raised during processing, it adds concentration to even the proprietary cleaning solution, and foam appears.

What else can replace a branded cleaner for a vacuum cleaner? Ferry dishwashing gel and 1 teaspoon of baking soda. In order to make sure that the amount of foam is reduced, you can mix the composition in a blender and select an effective proportion.

Thomas TWIN T1 Aquafilter - high power and maneuverability

Thomas TWIN T1 Aquafilter is distinguished by its light weight, high maneuverability, ease of care and use, high-quality German assembly and components. Draws in dust with a power of 280 W.

The device is equipped with an aquafilter that removes dust floating in the air. It has a foot switch and an automatic cord rewind function. Parking in two positions. A removable water tank is attached to the inside of the housing.

Suitable for cleaning laminate, linoleum, tiles, upholstery, carpets.

The kit includes nozzles: carpet/floor, for cracks, upholstery, washing.

The model can be recommended for cleaning 2-3-room apartments, families with children, and connoisseurs of European quality.

Reviews

Buyers note maneuverability, lack of dust and foreign odors after cleaning, good power, and ease of use. But the device is large in size.

Pros:

patented water filtration system;
comfortable handle, 2 parking positions;
easy to clean and move around the room;
the cable is automatically wound inside the case;
foot switch.

Minuses:

small reservoir for collecting water;
quite large dimensions.

How to make a vacuum cleaner with your own hands?

A vacuum cleaner is a smart device that removes dust and various contaminants by sucking them in with an air flow. The first vacuum cleaners were made in the USA in 1869. Modern units are equipped with all the necessary parts: a centrifugal compressor, an air cleaner, sets of replaceable nozzles and brushes and many others.

Devices can be household, industrial, portable, floor-standing, manual, automatic. There is a huge selection of vacuum cleaners in stores, but you can create a device at home with your own hands if you follow the instructions and have all the necessary materials.

You can turn a household vacuum cleaner into a powerful construction device.

You will need the following details:

corrugated hose;
filter;
motor;
wheels;
tubes;
fastening elements;
socket;
air suction motor;
a storage tank that collects debris, dust and sawdust;
A 41 liter barrel is suitable as a container.

Let's look at the step-by-step creation process.

It is necessary to determine the optimal length of the wiring for connecting to the power supply and install the outlet. Using a crown with a diameter of 43 mm, you need to drill a hole in the upper part of the lid.
In the middle of the place where the socket and the housing are located, you need to install a rubber gasket and secure it with self-tapping screws.
Then you need to strengthen the toggle switch. To do this, small holes should be drilled in the lid for it. To prevent the board from coming into contact with the case, it must be mounted on racks. The stands themselves are cut out of a fountain pen.
After this, you should connect the power cable. Two wires are connected to the switch, and the third is connected to the mounting screw, where the ground from the outlet is connected. This is necessary for the device to be grounded.
The next stage is fixing the filter. It is necessary to cut a 96 mm hole at the bottom of the dust collector and on the tank lid, and drill holes for the screws around the circumference. Cut out a plug from plywood, tighten all the elements with screws, and secure the filter to the bar with a pin.

Bosch BWD41740 washes and cleans any dirt

The Bosch BWD41740 washing vacuum cleaner efficiently removes dirt from any surface, cleans the air of allergens and dust, collects liquid from the floor, and is suitable for washing carpets and upholstered furniture. Power consumption is 1700 W.

It has 7 different attachments that provide excellent cleaning results. The turbo brush and narrow nozzle allow you to quickly collect hair and animal fur and effectively clean every crevice and corner of the room.

The device is equipped with an aqua filter and an EPA filter to remove dust and allergens from the air. They are easy to clean under running water.

The five-liter tank does not require adding water when washing large surfaces. Supplied with detergent and foam neutralizer. All accessories are stored in the built-in compartment.

The range is up to 9 meters. The long cord (6 m) rewinds automatically.

The vacuum cleaner can be recommended to families with animals and small children, i.e. it is necessary to clean frequently.

Reviews

Buyers note the high suction power, speed and efficiency of cleaning, convenient attachments, ease of assembly and washing of the device.

Pros:

multifunctionality;
4 operating modes: with dust collector, wet cleaning, with water filter, liquid suction;
large volume of water container;
automatic cord winding;
cleaning radius - up to 9 meters;
high-quality assembly and components.

Minuses:

high price.

Tools and materials

To make a vacuum cleaner for washing, you need to have a “classic” device: the new one will be made on the basis. Otherwise, a homemade washing vacuum cleaner differs from a purchased one only in appearance, but is not inferior to it in functionality.

To install a water filter you need to obtain:

a corrugated piece that is ideally sized for a hose; even better, a hose from an old vacuum cleaner;
glue and glue gun;
sandpaper;
container (for example, a bucket of putty with a lid);
a piece of thick fabric;
sharp knife;
a piece of small diameter sewer pipe and a PVC corner;
electrical insulating tape.

Professional vacuum cleaner Nilfisk-ALTO BUDDY II 12 for laminate and parquet

Nilfisk-ALTO BUDDY II 12, included in the top, perfectly cleans floors and is used for cleaning rooms of various types and purposes. A lightweight, maneuverable unit allows you to quickly tidy up hotel rooms, restaurants, cafes, offices, warehouses and large residential buildings.

The vacuum cleaner for washing floors is of an industrial type, but is lightweight. Two large rear wheels and a front swivel wheel improve maneuverability and make work much easier. There is a built-in accessory holder. The impact-resistant plastic from which the case is made can withstand high loads.

There is a blow-out function and a HEPA filter. Power consumption is 1200 W, vacuum - 200 mbar/20 kPa, air flow - 3600 l/m, container volume - 12 l.

Recommended for cleaning public buildings and large houses. Can be used for laminate, parquet, waste collection during construction, renovation.

Reviews

Buyers note high power, ease of movement, the presence of blowing, and a large volume of dust collector. You can buy additional attachments and reusable bags.

Pros:

continuous operation over a long period of time;
power;
maneuverability;
equipped with an excellent filter;
presence of blowing function.

Minuses:

It is difficult to find compatible bags for sale.

Clever & Clean HV-100 - compact size and no wires

Clever & Clean HV-100 is the smallest of the washing vacuum cleaners in our rating of the best. It will help you quickly put things in order in the kitchen and living rooms. Ready to use immediately after removal from the charging station. Continuous battery life for 16 minutes. Power consumption is 100 W, which is significantly more than many similar models.

The kit includes nozzles for collecting loose debris, dust, washing windows, and sucking up liquid. Windows and mirrors can be washed to a shine in just a few minutes. It is very convenient to collect garbage and liquid spilled during cooking. Excellent for removing dust in hard-to-reach places. Easily cleans blinds, ceiling lamps, sconces, ventilation grilles, and upholstered furniture.

The device is easy to clean. You can see when the dust bin is full by the light indicator.

A mobile vacuum cleaner can be recommended for every family. This is an indispensable device for instantly cleaning local areas.

Reviews

Buyers note the versatility, compactness, and mobility of the device. They are also praised for the high quality of components, power and ease of maintenance.

Pros:

high maneuverability and power;
universal application;
no wires;
high-quality assembly;
affordable price.

Minuses:

makes a lot of noise;
There is no indication of the battery charge level.

How to refill a washing vacuum cleaner using household chemicals

The main condition for a detergent for a vacuum cleaner is the absence of foam. Additional - requires efficiency, deodorization, preservation of dyes and the absence of secretions that are dangerous for allergy sufferers. There is no chlorine or phosphates in such powders and shampoos.

The packaging of the low-foam composition contains a “vacuum cleaner” icon or a corresponding inscription. Reputable manufacturers develop special, effective branded formulations so that the owner does not have to think about what to put into the washing vacuum cleaner. They supply their chemicals to store shelves:

Whirpool is a supplier of premium household appliances and special formulations in shampoos.
Astonish - products cope with mold and microorganisms.
Topperr – hypoallergenic, antistatic shampoos. Contains no chlorine or phosphates.
Vanish – effective due to free oxygen, pleasant fragrance.
Zelmer is an active formula, safe for children and animals, without fragrance.
Karcher is a universal, quickly soluble product in water.
Tor House 391602 – Effective, keeps colors bright, gives a fresh smell.
Allergy-Free - hypoallergenic, sold in pharmacies.
Pip Carpet Cleaner – with probiotic, sold in pharmacies, anti-allergenic.

The listed shampoos for washing vacuum cleaners are effective and have compositions suitable for special conditions. Does it make a difference which one to buy? It is important to use a detergent recommended or formulated by the manufacturer. This will increase the working life of the device.