France is a country of Mediterranean beaches and ancient Alpine villages, the birthplace of fashion houses and something extraordinary for all lovers. It was from there that the name of a unique lamp came to us, sowing twilight and giving the opportunity to be alone with oneself, read a book or just drink a cup of hot tea.
A floor lamp is a lamp on a stand that is installed on the floor. We bring to your attention the topic of how to make a floor lamp with your own hands. In this article we will talk about how to make this lamp correctly and figure out how you can make it unique. We will see what materials can be used and analyze the order of work.
The entire story will be accompanied by illustrations and suggestions for production; this technique will best reflect on your perception and, perhaps, give impetus to a new idea. We wish you pleasant reading and creative success.
To assemble a floor lamp, you may need any old and unnecessary things. The base of the lamp looks especially interesting when it is made from those objects whose existence has long been forgotten.
Secret of success
Looking at the photo of a homemade floor lamp, it turns out that the secret of their universal adoration lies on the surface. The most original ideas and bold decisions produce the most attractive options.
So, clay, putty, liquid nails, and sealant can be used.
In addition, the floor lamp can be made from a vase, an ordinary umbrella, an old mesh with handles, or, alternatively, a denim skirt.
Keyless chuck
Today, plastic quick-release chucks have also become widespread.
They work on the principle of the famous Wago clamps.
To disassemble such a cartridge, you need to carefully press the latches on both sides with a slotted screwdriver.
When you remove the cover, you will find that there are no screws inside at all where you could attach the wires. A person who is far from electrical installation work will not immediately understand such a design.
How to connect it? Everything is done very simply.
You need to strip the ends of the wires and push them into the small holes until they click. Moreover, most models have two pairs of contacts at once. And accordingly, not two, but four holes at once.
They are designed for convenient assembly of light bulbs into garlands. Insert the appropriate wire into one hole, and the one going to the next light bulb into the other.
Just don’t think about inserting phase and neutral into adjacent holes, otherwise you will create a short circuit!
Inside these contacts there are spring-loaded metal plates that provide the connection.
Here also do not forget about the correct connection of phase and zero.
The wires in such clamps are held quite securely, and even with a little force, they cannot be pulled out.
In order to still pull it out from there, you will have to turn the core in a circle while pulling.
Personally made floor lamp
In order to find out how to build the specifics of the work, it’s worth, first of all, to familiarize yourself with the step-by-step instructions on how to make a floor lamp.
At the initial stage, we prepare the materials: an ordinary plastic bucket, a board, at least 100 cm, wood glue, a multifunctional adhesive, a lamp with an electric cord and plug, fasteners, and, in addition, a copper elbow and, of course, paint.
But the production of the frame will require a beam of 150 cm with a diameter of 3 cm and a copper tube of a similar size.
- Let's make the base. We divide the board into 2 segments so that one is approximately 2 cm larger than the other. Glue the boards together in the center. We retreat 5 cm from the edge and drill a through hole with a diameter of 3 cm.
- When making the frame, it is necessary to make a hole in the wooden post in order to thread a copper tube into it.
- On the opposite side, the pipe should protrude 25 cm. At the joint, drill a 6 mm hole.
- A wooden stand is inserted inside the hole in the base and fixed with glue. After which, a copper pipe is inserted towards the floor.
- An elbow is attached to the pipe, on which the lampshade is hung.
- A cord is threaded into the previously made hole so that it protrudes from the end elbow.
- Time to make a lampshade. We amputate the side of the bucket, and cut out the bottom so that the cartridge fits there.
- Paint the bucket in 2 layers. We apply the second one only after the first one has completely dried.
- The socket with the lampshade is attached to the wire.
Cotton wool lamp in the shape of a cloud
It’s easy to make a lamp out of cotton wool with your own hands.
- 3 paper Chinese lanterns, connected with a glue gun to each other, in a horizontal position;
— the LED strip is completely immersed in the first lantern, securing its end to the top;
— with a stationery knife, make cuts in the lanterns at the places where they join;
- the second end of the ribbon from the first flashlight is pulled into the second, and then into the third;
— the perimeter of all lamps is filled with hot glue and white holofiber is applied;
— connect the adapter to the fixed LED strip and plug it into the outlet.
This lamp is suitable for a bedroom or nursery. A starry ceiling will complete the magic of the night.
Let's create a lampshade
Making a lampshade for a floor lamp when the old one has become unusable will not be difficult. There are many options here, from the more classic to the trendy.
For example, you can use the decoupage technique and decorate the lampshade with beautiful openwork napkins or similar decorated elements.
Satin ribbons, all kinds of bows, chic gathered fabric, photographic film. There are actually a lot of ideas.
Errors during installation and operation
At the end, we will briefly summarize and make a selection of common mistakes that you should avoid when connecting and servicing a light bulb socket.
1Connecting the phase conductor to the threaded part of the base.
How it all ends was described in detail above.
2Do not forget to tighten the screws that secure the contact plates to the ceramic liner at the very beginning.
You can solder all the wires super securely, but if these screws are loose, then heating of the connection is still inevitable.
3Connecting multi-core wires without soldering or tinning.
4Connecting phase and zero to two adjacent contacts of the keyless chuck and creating a short circuit.
5 Squeeze-adjust the central plate in the carbolite cartridge when bending it, using a non-insulated tool.
Fabric version
By the way, any fabric can be used. The main thing is to play with the idea beautifully.
How to make a transformer with your own hands - step-by-step instructions, diagram, drawings, list of materials + photo of a finished homemade transformer- Which hidden wiring detector is better? TOP 10 best manufacturers with photos and descriptions
- Technological maps in construction - what is it?
You can create a collage from a wide variety of scraps, you can come up with small flowers or bows, or you can come up with a version with a piece of children's clothing.
Connection of old-style carbolite.
Let's start with carbolite ones. This cartridge is collapsible and consists of three parts:
- cylindrical body with thread
- bottom
- ceramic insert with contacts
Most often in our apartments we use cartridges marked:
- E27
- E14
The value in numbers indicates the diameter of the lamp base in millimeters that is suitable for this socket.
The letter “E” indicates that it belongs to the screw series with Edison threads.
There are also pin type, G series and some others presented below.
Such products are designed for a current of no more than 4A. That is, in a 220V network you can connect a load of up to 900W to them.
Photos of beautiful DIY floor lamps
- How to fix a laptop that won't charge
Insulated dielectric screwdrivers up to 1000V - tips on how to choose the best manufacturer
- Dielectric insulated tool for work - which one is better to choose? Review of manufacturers, photos + video
Did you like the article? Share
5+
