Christmas tree made of wire: ideas with photos, master class on crafts for New Year

The holiday is getting closer. We know how to make the wait even more fun. A DIY sisal Christmas tree is exactly what you need to while away the evening, and at the same time receive a delicate gift for anyone or an amazing decoration for your office, home, or school classroom.

It's a simple and fun job. We promise that in our master class everyone will get a lovely sisal Christmas tree!

DIY wire Christmas tree on a table or window 2022 – step-by-step production

If you want to decorate a room or office, you can create a creative Christmas tree. For example, a tree made from cotton pads looks beautiful, but a craft made from wire will be no less impressive.

You will need:

coil of wire;
scissors;
wire cutters

How to make a Christmas tree from wire?

1. Make a cone from cardboard. Or take any conical object of the required height.

2. Starting from the bottom, wrap the cone with wire. The size between rows may vary depending on your preference.

3. At the top of the structure, leave 3-4 cm for the loop and cut the wire.

4. Pull out the cone and check the Christmas tree for stability.

5. Start decorating - with rain, garlands, small Christmas balls, threads, ribbons, beads and others.

Tip: use chenille wire to make the Christmas tree fluffy and original.

3D Christmas tree using papercraft technique

And here is another very interesting model of a forest guest, which, despite such an ornate name, is quite simply made. Although, of course, in this case you need to spend a little more time.

And the result will definitely please you, because the finished product will look like this:

In order to make a Christmas tree out of cardboard with your own hands using the papercraft technique, we will need:

several thin sheets of cardboard (or thick sheets of colored paper). By the way, they can be alternated in color: dark and light green;
glue;
compass;
ruler;
pencil,
and also a stick or wire.

We will act like this:

Step 1. The product is based on the same blank - this is a circle drawn with 6 lines and 2 circles. The largest circle is twice as large in diameter as the smaller one.

Step 2. You need to make 5-6 such blanks or even more. Each subsequent one is 1-2 cm smaller in diameter than the previous one.

Step 3. After all the models are prepared, cut the circle inward to a smaller circle, as shown in the photo. We glue each fragment together, making a cone out of it.

Step 4. At the last stage, we simply string each element onto a stick or wire (you must first make a hole in the center with a needle).

Step 5. The crown can be made from a small cone of the same color. All that remains is to dress up our Christmas tree and put it in the most visible place.

Using the papercraft technique you can make several different Christmas trees - “thicker” and “slimmer”. The result is a small forest that can certainly create a cozy atmosphere of childhood in any home.

By the way, this “forest” can easily be made hanging - to do this, you can take a beautiful ribbon and attach it to the top of the trees with glue or a needle.

Details and comments can be seen here:

How to make a wire Christmas tree with a stand for the New Year 2022

You can try and make a beautiful Christmas tree on a leg. It looks very unusual.

1. On one side, wind the wire in the form of a flat spiral, on which the structure will be held stably.

2. Then start winding the wire around the cone, bite off the top using wire cutters.

You can also use a special stand. It is worth attaching the upper edge of the conical Christmas tree made of wire to its upper part. And you can even decorate it with garlands.

The green beauty - the Christmas tree - is the main attribute of the New Year holidays. What if you deviate from the usual canons and make an original tabletop Christmas tree from non-standard materials? A little imagination and your home will be filled with a festive mood thanks to an extraordinary New Year's decoration. Today you will learn how to make a Christmas tree from sisal with your own hands.

For work we will need:

foam blank - cone
acrylic paints or gouache
sisal
wire
clay pot
gypsum (or cement)
decorative ribbons for decoration
bell
wooden sticks
jute
glue gun

Progress:

Let's take a foam cone. It can be replaced with a paper cone made independently, but it is easier to work with a foam blank. Therefore, we will use a ready-made cone. To prevent the white foam from showing through the sisal, the cone must be painted in a color as close as possible to the color of the sisal. To do this, prepare acrylic paint. We didn't have a paint color that was similar to the color of sisal, so we mixed dark green paint with yellow. Add a little water to it to make it more liquid.

We paint the cone on all sides. We insert a wire folded in half into the top of the cone - this will be the top of our Christmas tree. To prevent the wire from flying out, we secure it with a glue gun.

Next we move on to wrapping the cone with sisal. First you need to wind the sisal to the top and bottom of the cone. Let's start from the top of the head, fix the middle of the sisal at the very tip of the wire. Then, twisting in a spiral, we lower the sisal down the wire to the cone, trying to leave no gaps. Carefully fix the sisal with a glue gun from time to time.

Glue the sisal to the bottom of the cone. We lay sisal “cross on cross”

We continue winding from top to bottom until there are no uncovered areas left.

In order for our Christmas tree to be stable, we need to prepare a heavy base for it. Before we move on to filling the pot, we will make a trunk for the Christmas tree. To do this, take a wooden stick. For us, these are bamboo sushi sticks purchased at the grocery store. We wrap the stick with jute, fixing the beginning and end of the thread with a glue gun.

When the tree trunk is ready, you can fill the pot with plaster. Dilute the plaster with water in the proportions indicated on the package. We use gypsum mixture purchased from a hardware store.

Place the stick-trunk in the pot filled with plaster and wait for it to harden completely.

While the plaster in the pot hardens, let's move on to the most enjoyable part - decorating our beauty. You can decorate the Christmas tree with anything - beads, rhinestones, sequins, lace, ribbons, etc. Here it's only up to your imagination. We take a red bead thread and gold decorative braid. We wrap the tree, starting from the crown to the base of the cone. Be sure to fix the decor with a glue gun.

We put a little beige sisal in a pot with hardened plaster, glue a bow and three beads from our thread.

Glue a bell on a ribbon and a bow to the top of the Christmas tree

All that remains is to install the Christmas tree itself on its trunk. To do this, move the sisal a little away from the center of the bottom of the cone. We insert the barrel with the pot into the middle of the cone, fixing it at the edges with a glue gun.

That's all, our New Year's beauty is ready and happy to decorate the house for the upcoming holidays.

Did you like the master class on creating a Christmas tree from sisal? Leave your comments below.

Happy creativity and Happy New Year! :)

Flat Christmas tree made of wire - how to make?

This Christmas tree is very easy to make. You need to select the wire and draw a sketch of the future product.
Then use this wire sketch to create a cute tree that can be decorated with tinsel or even garlands.

Christmas tree made of beads: a master class on bringing the idea to life

And now we present to our readers a Christmas tree made of beads - a master class with step-by-step photos. For such a creative process you need to stock up on:

wire with a diameter of 0.25 mm;
beads of green and golden color.

First you need to collect 9 green beads and 1 golden bead on a piece of wire about 40 cm long. Without touching the golden bead, you need to thread the other end of the wire through the green beads in the opposite direction. Thus, a needle is created for the future New Year's green beauty.

At the next stage, you need to align the wire clearly in half, tighten the ends tightly. On each side you should make a couple more needles of this type.

Important! It is necessary to arrange the needles so that they are as close to each other as possible. This will give the product a neat appearance.

These small branches should be used to form a large branch for the Christmas tree. For the upper branches you need to use 10 small branches, pre-harvested, and for the lower ones - 15.

You need to assemble a Christmas tree from beads in this order:

for the top - one small branch;
for the second tier - three large branches, each of which consists of 10 small ones;
for the third tier - four large branches, consisting of 10 small ones each;
for the fifth tier - five large branches, each of which contains 15 small branches.

The number of tiers and large branches in them may increase depending on the height of the product planned to be made. The photo below shows step-by-step weaving:

DIY felt Christmas tree

A DIY felt Christmas tree is considered a fairly simple way to make it. This souvenir can be used as a New Year's gift for friends or acquaintances. The advantages of felt as a material for a Christmas tree are that it is able to hold its shape well and is not prone to shedding.

To make a felt New Year's beauty, you need to use an arsenal of materials and tools consisting of:

To make the tree look more fun and elegant, it is recommended to use several colors of felt, but in the same tone.

First you need to prepare a cardboard cone, which is secured with tape or glue.

At the next stage, you need to cut out circles from felt, different in diameter - as they increase. You can pre-prepare cardboard circle templates.

The base of the cone must be decorated with tinsel, which is also attached using glue or tape.

On each of the cut out felt circles, make a cross cut in the center and place them sequentially - from largest to smallest - onto the cone. When all the pieces of felt are on the tree trunk, the resulting beauty should be decorated with a star on the top of the head, and with tinsel along the entire height.

Christmas tree made of chenille wire - decor options

Using chenille wire, you don't need any tinsel at all. And it’s easy to make a craft. All you have to do is take a cone and wrap a wire around it.
You can also cut chenille wire into pieces and tie them to a base of wood or other material to create Christmas tree branches.