How to make an owl from leaves: step-by-step instructions, original ideas and options, photos

  • November 1, 2018
  • Crafts
  • Legina Marina

It's time to collect autumn leaves. This is waste material that is lying around in huge quantities underfoot. But it can be harvested, dried and then used throughout the winter. Dry material will retain the warmth of autumn for a long time and delight with wonderful colors. And on long winter evenings you can spend time with your children creating beautiful compositions. Today we’ll look at how to make an owl from leaves with step-by-step instructions.

Choosing leaves

The first step is to choose the leaves that will be the basis of the composition. It is better not to use large ones with carved edges, because it will be difficult to give the painting the correct contours. Cherry leaves are best. They are small, have an even contour, so they can be laid out on the selected pattern and get a good result. But small maple ones will also do.

How to prepare

To create original crafts using seeds, be sure to dry the natural materials well before use. This is the only way to guarantee their long-term preservation in the future (they will not peel off or shrink in size), and also to eliminate the possibility of deformation of the finished painting or three-dimensional decor. To prepare watermelon and pumpkin seeds for work, you need to thoroughly clean them of any remaining pulp, then spread them out in one layer and wait for them to dry naturally (they can also be dried in the oven). If necessary, you can color the seeds (often used for rice, pumpkin seeds):

  1. Transfer the seeds to a bag, add acrylic paints (you can also use food coloring, or in extreme cases, gouache).
  2. Close the bag and mix the seeds well, distributing the paint or dye evenly. Leave for 30-60 minutes.
  3. Place on a flat surface and dry completely.

Also, seeds can be painted directly after assembling crafts or laying out applications.

Let's get started

Now let's find out how to make an owl from leaves. You can find step-by-step instructions below:

  1. Draw the outline of an owl on a piece of cardboard and cut it out. This is the basis of our preparation.
  2. Now we gradually apply glue and begin to fill the outline with leaves. If you are doing a craft with a small child, then you need to choose a glue stick.
  3. We begin to lay the leaves from the bottom, gradually rising higher. We continue to lay the material overlapping each other until we completely fill the entire workpiece.
  4. For the ears you need to choose oblong leaves.
  5. Cut out eyes, beak and paws from colored paper.

As you can see, there is nothing complicated. Make an owl from leaves. Anyone can do it with step-by-step instructions.

Button mosaic

Take colorful buttons and beads. Fill in the outline of an owl drawn on plain paper with them. If the resulting composition suits you, take a photo of it and then proceed to gluing the elements in the same order to the cardboard template.

If you don't have enough buttons, lay out only the outline with them, and fill the inner space with beads.

Big and small

You can choose the size of the materials yourself, using the instructions as a basis, preferably step-by-step. We have already discussed above how to make an owl from leaves, but then everything depends on your imagination. You can simply lay out the applique on a sheet of cardboard. If you cut out the figure and then cover it with leaves, you will get an excellent gift option. Acorn caps can serve as eyes.

Make it a little more difficult. To do this, prepare an additional thick twig and yarn. Separately, you can make legs from cardboard and tighten them into a ring using thread. Now pass a stick through the two circles and secure this structure to the owl. The illusion is that she is sitting on a tree in the forest. Making an owl from leaves with your own hands, as it turns out, is easy and simple.

From logs or wood cuts

A log can produce a large owl, and cuts from trunks and branches can produce a smaller specimen. Even a small figure will look very colorful, so there is no need to chase size. In addition, you will need bark, branches, cones, as well as buttons, plasticine, and fluffy wire.

Step-by-step instruction

A log or large cut will become the body of the bird. You'll have to work hard with a hacksaw. For the remaining parts (head, wings), prepare smaller parts. The thickness of the cuts is not significant, but they should be the same and preferably not too heavy.

The plumage is made from thin saw cuts, twigs, cones, and pieces of bark. Give them the desired shape and secure. Instead, you can apply the corresponding design by burning.

Glue buttons in place of the eyes, attach a cone in place of the beak, and make ears from the tips of branches. The paws are sculpted from red plasticine or fluffy wire. If you have textured fabrics in bright colors, use them. Paper and cardboard are also suitable.

Do-it-yourself voluminous craft

It is very simple, but at the same time effective. To make it, it is not at all necessary to collect the most beautiful and even leaves. Even plain brown ones will do. The idea is well known, but the craft turns out to be very interesting. At the same time, it is done quickly and very simply.

To make an owl from leaves in a bag with your own hands you will need:

  1. Leaves that you find in the garden.
  2. Threads.
  3. Transparent plastic bag.
  4. Colored paper.
  5. Glue.
  6. Transparent tape.
  7. Double sided tape.

Applique from maple lionfish for preschool children step by step with photo

DIY lionfish applique. Master class with step-by-step photos.

Master class using step-by-step photos “Dragonfly on a flower.”

Description: Master class for preschool children, intended for kindergarten teachers, additional education teachers, and parents.

Purpose: The applique can be used to decorate a home or exhibition.

Goal: To form imaginative thinking and creative imagination through the transfer of the characteristic features of the depicted object.

Tasks:

  • Strengthen the skills of manufacturing and processing the surface of a mold using various techniques and methods;
  • Develop fine motor skills, imagination and imagination while working on the expressiveness of the image of a dragonfly or flower;
  • Cultivating interest in knowledge of living nature and caring attitude towards it;
  • Fostering accuracy and a rational approach to the use of materials.

Materials for the lesson: On the TV panel there is a photo with an image of a dragonfly on a flower, photographs depicting the sequence of work on the application, a sample of work, dried maple seeds (lionfish), scissors, a sheet of A-4 paper, plasticine. “Dragonfly on a flower” Riddle about a dragonfly:

“A helicopter landed on the daisy at the gate - Golden eyes. Who is this? (Dragonfly)

Step-by-step process for making an applique:

Materials and tools for work.


We construct a core for the flower from a plasticine ball and plant it in the middle of the circle.


We stick the lionfish with its sharp end into a plasticine circle.


We place the lionfish close to each other along the entire diameter of the circle


If desired, you can lay out the lionfish in a second circle.


We roll out the body of a dragonfly from a plasticine sausage and from two small balls-eyes.


We stick two lionfish on both sides to the dragonfly’s body. These are wings.


We plant a dragonfly on a flower. The work is ready!

Execution steps

The first step is to dry the collected leaves. You don’t have to dry them under a press, just scatter them on the bottom of the box. This is a mandatory step, because even seemingly dry leaves can contain a small amount of moisture. After packaging in a bag, condensation will form on its inner surface.

Now let's look at how to make a three-dimensional owl from leaves:

  1. Fill the bag with leaves.
  2. Tie the upper corners with thread, forming ears.
  3. Now you need to cut out eyes, beak and paws from colored paper.
  4. Fold the bottom corners of the bag towards the middle and glue with transparent tape.
  5. With its help, secure all the parts, including the paws.

Now your craft is ready. If it is intended for the street, then the paws can be omitted, and the eyes and beak can be glued in from the inside before folding the leaves. Now the owl can be placed on a garden tree. It’s even better if it has a hollow. Then the craft will decorate the garden all year round or welcome guests.

What other options are there for making an owl from autumn leaves? Based on the principle described above, you can make a model of both an owl sitting on a branch and a flying one. To do this, you just need to cut out the base with the wings turned upward and attach rings to them, into which you will thread a twig.

Little Owl

Children love toys with moving elements. The easiest way to make an owl's wings move.

To work you will need:

  • One-piece bird and wings template;
  • Cardboard for the base;
  • Two small buttons;
  • Two pieces of thin wire;
  • Durable, lint-free thread;
  • Wooden bead;
  • Scissors, glue, pencils, awl.

First of all, you need to print the template. If it is black and white, immediately color it with pencils or markers. Then cut out the parts and glue them onto cardboard.

Give the workpieces time to dry under pressure.

  1. Cut out the parts and make two holes in the wings, as shown in the photo of the craft. The owl will raise and lower its wings thanks to this mechanism.
  2. Using buttons and wire, attach the wings to the body. Insert the wire into those holes that are further from the edge.
  3. Thread a thread into the nearest holes and secure it from the inside of the body.
  4. Test the operation of the structure several times, and if everything is satisfactory, tie the threads at the bottom. For convenience, tie a large bead at the end.

“Twitch” is ready. The span of its wings depends on the location of the holes on the wings.

Forest composition

If your fantasy runs wild and you don’t want to stop, you can continue to create. Make a model of a tree from cardboard. It will need to be covered with leaves, and for the crown, select those that still have green color. Or you can improve the situation a little with the help of gouache. If you make several such models, you will end up with a grove in which a family of owls will live.

Now you can move on to making birds. One can be attached to a hollow in a tree, the other can be performed with open wings - in flight. Also add a nest with little owlets. The result will be a wonderful craft that will definitely take first place in the autumn competition at school or kindergarten.

More interesting ideas

Photos of a wide variety of owl crafts can become the basis for your own original solutions. To make it easier for you to decide, we offer several more options: made of clay and ceramics; edible owls made from dough, lined with seeds or cut out from fruits and vegetables; made using the quilling technique; woven from beads or beads; crocheted and knitted; sewn using patchwork technique (from shreds). Now it’s your turn to invent and create.

Other creative ideas

We now know how to make an owl craft from leaves. But this is not the only idea how this material can be used. This is a natural raw material that is very pleasant to deal with. The leaves smell like autumn and forest. Children always have great fun rummaging through leaves. And if you have the opportunity to create a real masterpiece out of them, then the evening is a complete success.

And when your craft is finished, you can try making something else from the leaves.

This could be a crown for a girl, which will allow her to become a real queen of autumn. Or make a cardboard blank of a carnival mask and cover it with leaves. It will be enough to fasten the elastic band at the back, and the craft is finished. You can even wear it.

From twine

Not only natural materials are used in making owl crafts. Here's an alternative. Another technique is used here:

  1. Inflate two balloons of different sizes. The large and oblong one will become the body, and the small and round one will become the head.
  2. Throw a roll of string into a container with glue (silicate or PVA) so that it is completely saturated.
  3. Wrap the twine around the balls and wait until dry.
  4. Now you can pierce both balls. Connect the remaining pieces of twine.
  5. It remains to arrange the small details according to the previous advice. For the eyes, you can take two cotton pads and two buttons.
  6. Tie a bright ribbon around your neck.

Watermelon seeds

Small watermelon seeds are more suitable for laying out various applications. For example, using such natural material you can make the following crafts:

Cheburashka is drawn on a white sheet of cardboard. Its body and ears are sealed with watermelon seeds. You can use black peppercorns as eyes or make eyes from black plasticine.

A peacock is drawn on a white sheet of cardboard. The stripes dividing its tail into feathers are lined with watermelon seeds. You can stick pine cone scales or beans on the ends. The remaining “empty” elements of the picture are simply painted.

The old kitchen clock is disassembled into individual parts. The base (into which the clock mechanism is inserted) is covered with seeds. An indication is cut out of golden paper and pasted over the seeds. The watch is assembled in reverse order.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]