DIY candy clock for the New Year - step-by-step instructions with photos
Creating a holiday attribute out of candy is a method of “killing two birds with one stone” at the same time. Firstly, thanks to such an accessory, your home will have not only a beautiful, but also a tasty element. And secondly, after the holiday, children and adults can happily treat themselves to decoration elements.
Clock made of candy, foam plastic and corrugated paper
A circle is cut out of foam plastic, wide enough so that it is convenient to attach sweets to it. A printed image of the dial is glued to the front surface. The back side and edges are covered with corrugated paper. A rectangle is cut out of cardboard, also covered with paper and complemented with a chain of beads.
The candies are each wrapped in corrugated paper and glued in a circle to the clock, leaving a small gap at the bottom empty.
The product is wrapped with tape over the candies and glued with the base to the rectangular part. The top can be supplemented with other candies, and the bottom can be decorated with any desired decoration.
New Year's clock made from candies and a round box
You will need a round candy package, which needs to be covered with corrugated paper. The box is wrapped in a circle with double-sided tape, onto which the candies are glued. The sweets can be additionally secured on top with a strip of beads, and the dial can be made from the same or other materials.
Clock made from candies and foam base
A minimalist and bright decoration can be made from the same circle of foam, corrugated paper, candies and ribbons. The circle is covered with paper, the edges of the “bow” are folded over the candies so that they do not stick out, and the sweets are glued in a circle to the base. The weaknesses are wrapped with ribbon on top and tied into a neat bow. A few more candies and other decorative elements are used to complete the image of the craft.
DIY New Year's watch out of a box - master class with photos
A watch made from a cardboard box looks truly magical. An ordinary one, from under shoes, will do. You will also need:
- colored paper;
- salty dough;
- scissors;
- scotch;
- PVA glue;
- glue "Titan";
- paints;
- brush;
- contours;
- rhinestones;
- salt;
- decorative tape.
First, a model of a clock house is made from a cardboard box: a roof and 2 round holes for the dial and door are cut out. The inside of the box is covered with colored paper. After this, all parts of the house are secured with tape. The outside of the future watch is covered with brown paper.
While the craft is drying, figures are made from salt dough to decorate the clock - a Christmas tree, birds, a horseshoe for good luck. You can make any other New Year's attributes. They are painted and sent to dry in the oven. The figures will dry at room temperature, but this will take more time.
Using an outline, a dial is drawn on the watch. Decorative tape is attached to the door so that it can be closed. Glue the salt dough figures to the workpiece. Decorate the house with decorative ribbon. A thick layer of Titan glue is applied to the roof and Christmas trees. It is better if it is distributed unevenly. This way the snow will look more natural and resemble real snowdrifts. While the glue has not hardened, it is sprinkled with salt, imitating snow.
New Year's cardboard clock - how to make it yourself
Cardboard crafts are easy to implement and can be a decoration for almost any room. They can be placed on a table or shelf, hung on a wall or door, and in general, choosing a place for the product is not difficult.
Painted cardboard clock
The simplest and fastest way is to cut out a frame from white cardboard, paint it at your discretion and add arrows to it, placing them in the desired position. The product is ready and can decorate any place.
Volumetric cardboard cuckoo clock
Details of the future mechanism are cut out of cardboard. A pre-printed dial and hands are glued to the front. This part can also be further decorated by painting. Afterwards, all that remains is to connect all the parts and hang the finished decoration in the chosen place.
Cardboard grandfather clock with moving mouse
A clock is drawn on a large rectangular piece of cardboard, and in several places the cardboard is stitched with thread or fishing line. One end of the thread remains outside at the bottom and a printed mouse or other animal is glued to it. The other end of the thread is fixed to the arrow. As a result, when “translating” the arrows, the mouse moves up and by midnight on New Year’s Day it will be at the top.
Cardboard cuckoo clock + template
All templates are transferred to colored cardboard or thick paper. They must be carefully cut out, folded along the fold lines and fastened together. The result of this work will be a three-dimensional figure.
A simple New Year's clock made from a cardboard circle and Kinder trays
A circle shape is cut out of thick cardboard. Inside the circle, at a distance of about 1 cm from the edges, halves of kinder “eggs” or similar objects are glued. They should be positioned similarly to the time stamps on a watch. One half is also attached to the center of the circle. All this is painted over in one color with paint of any desired shade.
Then arrows are attached to the central part, which can be made from a broken snowflake or printouts. The edges of the circle are wrapped with colored thin rain, and the center can be decorated at your discretion.
New Year's cuckoo clock made of cardboard - master class + template
Before the New Year, make an unusual cuckoo clock out of cardboard and decorate your home with it. Before starting work, prepare:
- cardboard of different colors;
- ready-made template (available on our website);
- cog;
- scissors and stationery knife;
- glue.
The necessary parts are cut out from colored cardboard using a template. First, assemble the dial and attach the hands to it with a screw. Window openings are inserted. Decorative elements are glued: a fence to the house, shutters to the windows, tiles to the roof. Now all that remains is to assemble all the parts: the clock is attached to the front of the house, weights on chains are attached to the bottom, and the house is glued together. The New Year's cuckoo clock is ready.
New Year's watch out of the box - 2 step-by-step MKs with photos
Almost every person at home can find at least one unnecessary box of shoes or some other thing. And instead of throwing this item away, it should be put to good use. So, one box can serve as the basis for creating a unique homemade decoration for the New Year.
Clock with a surprise
One part of the box is carefully cut and glued to create a pointed “tower” shape. A circle is cut out of the front wall, but not completely, but so that it has a connection with the frame. The box is completely covered with colored paper and complemented with Christmas tree figurines and other decor. The dial is drawn on the central circle, and the top is tinted with paint to create the effect of snow.
New Year's clock from a cardboard box in the form of the Spasskaya Tower
The box is covered with paper of the same shade. In accordance with the diagram, the dial, top and top decoration are cut out of colored paper, folded and glued. They are attached to the box using glue or tape.
DIY New Year's candy clock - step by step
An original sweet gift in the form of New Year's chimes made from candies can be made for the New Year. To do this you will need:
- round tin biscuit box;
- corrugated paper;
- candies;
- double sided tape;
- scissors;
- glue gun;
- beads, ribbons, tinsel, small balls for decoration.
Cut out 2 circles from corrugated paper. They should be slightly larger in diameter than a cookie box to cover the sides as well. The circles are glued to the front and back of the box. The side is covered with double-sided tape. Sweets are added to it. They try to place them as close to each other as possible so that there is no free space left.
The dial and hands are made from beads on the front of the box. The watch can be additionally decorated with ribbon, tinsel or beads, sparkles at your discretion.
New Year's watch made of felt - 3 options for DIY crafts
Felt is a popular material for making various crafts, and holiday watches are no exception.
Simple felt clock for the New Year
Circles of different diameters are cut out of felt of 2 shades. The main numbers from the dial are sewn to the largest circle: 3, 6, 9 and 12. Snowflakes are sewn or glued between them, replacing the remaining time marks. Then a smaller circle is attached in the center and arrows cut from felt of the 3rd shade are fixed onto it.
You can complement the design with the help of decorative stones.
Volumetric felt New Year's watch + pattern
Parts are cut out of felt of 3 shades in accordance with the diagram. They are connected by stitching or gluing in appropriate places.
New Year's clock made of felt on a cardboard base - step-by-step MK with photos
It is necessary to transfer the part templates onto thick cardboard, then cut them out and repeat the contours by applying them to the felt, in order to then glue the fabric onto the cardboard. Then you need to assemble all the parts of the watch together, add various parts and a felt dial to them. An owl is also cut out and glued from fabric, which is installed in the window on the clock and the craft is ready.
New Year's watch made of felt without sewing - master class
If you still have a working mechanism from an old clock, then you can make a real cuckoo clock with your own design. To do this you will need:
- old clock mechanism;
- cardboard;
- felt of different colors;
- glue;
- scissors;
- pliers.
A house is cut out of cardboard (you can take any cardboard box) according to a template. On the front side of the house they make a hole for the cuckoo and a small round hole for the clock mechanism. The facade is covered with felt. All parts of the house are connected using a glue gun. Glue strips of red felt on the corners of the walls so that the joints are not visible. The roof is decorated with brown felt. The doors are decorated with red stripes of white felt.
Now we need to attach the clock mechanism. Using pliers, carefully remove the clock hands and the nuts that hold them in place. Carefully insert the mechanism into the hole made on the front of the house. Attach the felt dial and screw on the hands. Design the dial.
A platform is cut out of brown felt on which the cuckoo will sit and attached to the house. Parts for the cuckoo are cut out of felt using a template and glued together. To make the figurine voluminous, you can stuff it with pieces of felt or any filler you have at home. The bird is placed on a platform and secured with glue.
The clock is decorated with fruit figures cut out of felt. You can come up with the decor yourself.
All that remains is to make a pendulum for the clock. To do this, make 2 tassels from yarn and attach them to the watch case. The original craft is ready.
Paper clocks for the New Year - 3 ideas with photo instructions
Paper is a universal material present in most crafts. Therefore, it is not surprising that it is often used in creating homemade watches for the New Year.
New Year's paper clock with accordion
The colored paper is folded like an accordion and bent to form a triangle. You need 4 such triangles and they should all be fastened together with glue or tape. The end result is an accordion circle onto which you need to glue the hands and dial markers to complete the look.
Volumetric paper cuckoo clock
The diagram is printed on paper or transferred to colored paper, if desired. Then they carefully cut it out, bend it in the indicated places and glue it together, obtaining a voluminous result.
Clock for the New Year made from newspaper tubes
Any paper and even newspapers will be suitable for such a thing. The sheets need to be rolled into thin tubes, then rolled gradually, forming a large circle.
This circle is beaten with a hammer to make it denser, flatter and smoother, and painted in the desired shades.
Any decor is added to the edges of the circle, the dial itself is drawn on it and all that remains is to fix the hands.
Finally, you can make a mount from wire so that the product can be hung somewhere.
New Year's clock made from accordion paper - a simple and quick craft
Making a New Year's clock out of paper is not at all difficult. Take a sheet of colored paper and fold it like an accordion. Fold it in half and glue the ends together. Now straighten the accordion. In total you need to make 4 such fragments. They can be the same color or different, it depends only on your desire. The fragments are folded and glued to form a circle. Hands and numbers are cut out of paper and glued to the dial. Additionally, you can decorate the watch with New Year's symbols - snowflakes, a Christmas tree, a figurine of Santa Claus.
DIY clock for the New Year from foamiran - MK + template
Foamiran is a comfortable and interesting material, not without reason called plastic suede. With its help you can create a unique design for New Year's watches.
To do this, the main parts of the watch are cut out of cardboard, they are also covered with cut out foamiran overlays. A single composition is assembled that can be hung on any clock in the house.
Magnificent homemade cuckoo clock
The presenter of the channel “Levsha” made this cuckoo clock from a cutting board and a wristwatch. They have an impressive appearance on the outside and a tiny mechanism on the inside. We take out the dial along with the mechanism to assess the degree of operation.
Products for inventors Link to the store.
I found an engine with a gearbox and a set of gears. The motor shaft is long and needs to be shortened. Grind under the sliding bearing. Thanks to digital rulers, it has become much easier to achieve the desired diameter on very small workpieces. We grind off the teeth in one of the gears; they will not be needed.
Brass has good glide, so we make a mount for the shortened shaft. Solder to the motor housing. The result was a small motor with a gearbox. But we still have a couple more gears. Thanks to them, we will change the gear ratio. We make a mount for an additional gear. We drill a hole in the brass rod along the inner diameter of the gear.
DIY electronics in a Chinese store.
We solder at the required distance so that the gears mesh correctly. Drill a hole, stepping back a little from the edge. We insert a metal rod of the required length into it. This is the most important part of the homemade cuckoo clock mechanism. We take a digital sound recording and playback module. We make it as compact as possible. We place the microcircuit below, solder the microphone and loudspeaker.
Bamboo cutting board. We are making the front part of a future clock equipped with a cuckoo. Draw 2 lines from the center at an acute angle for the roof. We also cut off all the excess on the watch so that it can be attached differently. I am pleased with the very small runout of the machine. There was a danger of squeezing the glass when it was glued into place. It could crack.
We are currently putting the watch back together to mark where its seat will be. Drill a hole in the center of this place. We prepare a platform for fixing the part on the lathe. We make a recess to fit the diameter of the watch. We also make a cut for the crown. We grind in a circle so that the clock fits a little less tightly. Bamboo must be cut and sanded carefully; it has a habit of chipping along the grain. We mark the places for the cuckoo doors.
We are preparing a platform for mounting the engine on the clock on the reverse side. We make 2 fastenings so that the electronic unit can be lifted up. We make the second mount so that the electronic unit is placed under it. There will be no heavy loads here, so we glue the blog with two-component glue.
The main components are placed, so you can make the floor and walls of the house. We check how evenly the gluing turned out. We are preparing a place for the lever on which the cuckoo will sit. And look out of your house. We check that the gear does not touch anything and make a lever.
Watch the continuation of the video about a homemade cuckoo mechanism from 7 minutes.
Clocks made from disks for the New Year - make an original craft with your own hands
Even old discs can be given a second life by using them for crafts. In the case of a watch, you need to take one disk and attach plastic forks to it in a circle.
Glue the dial in the center.
All that remains is to complement the craft with arrows, ribbons and other decorative attributes to give it a festive look.
How to make a beautiful New Year's clock from candies?
New Year's candy clock
Recommendations for making a box
If you want to make a New Year's watch from candy, you will have to make a round box of the required size with your own hands. In order for your craft to turn out perfect, you will need to make sure that the side of the cardboard blank is the same length as the candies you have chosen.
Manufacturing recommendations:
- To begin, cover the cardboard blank with corrugated paper, foil or simply beautiful packaging. Try to fix it on the base as well as possible, because this will determine how well the candies will stick to it.
- Glue the dial to the top of the box and be sure to make arrows. They can be made from more contrasting paper or wooden blanks painted in the desired color.
- When all this is ready, you can start fixing the candy on the box. Try to lay them in such a way that there is no greater distance between them. If you have chosen candies with uneven edges, then fill in the resulting voids with rain.
- After all the candies have been glued, all you have to do is decorate your New Year's clock with additional holiday decor. At this stage, you can allow yourself to use all your imagination and, in addition to the standard New Year's decor, use, for example, beautiful buttons or original rivets.
Salt dough clock for the New Year - step-by-step master class
For a puff pastry item, first take a round box, which will be the frame of the watch. And in this box you need to make several holes into which the rope is threaded for further fastening. The bottom of the box is covered with puff pastry, and watch parts are formed from it and fixed to the base. To complete the look, all that remains is to color the dough, giving it detail and an overall festive look.
How to make a beautiful New Year's clock from polystyrene foam?
New Year's clock made of foam plastic Clocks cut out of foam plastic Figures for decorating clocks
If you have been doing handicrafts for a long time, you probably know that foam plastic is a very malleable material. If desired, you can make a very beautiful New Year's watch out of it. If you have time, you can cut out a round piece of the desired size from this material, and then treat it the same way as with a round box. You can cover it with decorative material and then decorate it to your liking.
Also, if desired, the foam plastic can be decorated with paints and then decorated with shiny tinsel. Well, those needlewomen who are not afraid of painstaking work can try cutting out clocks from foam plastic. And in order for your craft to turn out festive, you will need to give it an interesting shape or simply decorate it with New Year’s figures made from the same foam. You can see how all this can be brought to life in the pictures posted above.
Embroidery clock - detailed MK + 5 embroidery patterns
You can also create a festive decor in the form of a clock using embroidery, if you have the desire and some skills.
Miniature watch - simple embroidery pattern + step-by-step instructions
The counter and general appearance of the watch is embroidered on the fabric; thicker fabric is sewn to the back so that the figure holds its shape. Feathers on chains are attached to the bottom of the watch, and a thread is added to the top so that it can be hung somewhere.
New Year's clock cross stitch - 5 patterns
In accordance with the pattern, the complete appearance of the watch is embroidered on white fabric.
A more complex pattern that requires a larger piece of fabric as a base, on which you can embroider another New Year's clock.
Monochrome scheme of New Year's clock.
A simpler, but no less attractive scheme, in which you can use any desired shades to create a New Year's watch.
A charming embroidery pattern with a squirrel will help you make a unique decoration for the holiday.
Creation from scratch of a cuckoo clock with chiming and “performance”.
A few months ago I got the idea to make a wall-type clock, which in functionality would be close to a clock with “performance” (i.e. presentation, action, movement of various figures). This idea was prompted by watching a video of a number of antique clocks or German watches, where when a whole number of hours comes, this very movement of some figures occurs. On one of the forums, a good person, at my request, wrote a program for the Atmega8 controller. I checked it on the simulator in Proteus. Everything works as intended. That is, in principle, the electronic part is ready. Let me describe the functionality a little: in a case with an antique design there is a digital clock on the controller. The numbers are small, located inside the case, have an auxiliary function and serve only to set the time and events. On the outside of the clock there is a pointer mechanism of a quartz clock with a pendulum. The electronic part of the digital clock provides various design options: a cuckoo clock, a striking clock, a clock with retractable figures. You can also do everything at once: chimes, chimes, performance. In fact, quartz pointer clocks may not be synchronized with digital ones at all. True, in this case, from time to time you will have to make a small correction of their readings manually. The issuance of all signals for the operation of the cuckoo, chiming and performance is provided by a digital clock. From them we receive signals to trigger the above devices. Now about obtaining the necessary sounds: this task is supposed to be solved on the basis of 10-second digital Chinese sound recording boards. They have a built-in microphone and allow you to record and then play back the recording continuously or once until it ends. Based on them, you can make a cuckoo, a clock striking, or a sound effect for the “performance” of figures. The output of these boards is rather weak, but you can use audio amplifiers. The simplest and smallest digital 2-3 watt. His fee is slightly larger than a postage stamp.
As for electronics, I think everything is clear. Now about the mechanics. We need to think through the mechanics of the cuckoo and the performance. With the cuckoo you need to solve two problems: opening doors and twitching the cuckoo. Twitching the cuckoo can be done relatively simply by shifting the center of the cuckoo's swing forward, and the electromagnet will attract the cuckoo's tail at a given frequency, which will create the overall desired effect of movement. I don't know how the doors open yet. I would like to make it simpler, without complex lever systems.
Now about the most interesting thing, about the “performance”: in different watches there are a variety of character figures. I found especially interesting the figures of all sorts of saints emerging from the clocks in one of the cities of Europe. I would like something similar here. There are also German clocks in which the figures of domestic animals move, the wheels of a water mill, etc. Of course, such a project requires a lot of time and effort to implement, but it seems quite interesting in terms of creativity. I would like to know the opinion of watch lovers. Will there be anyone interested in promoting it together? I started to draw him in Solid, but life got in the way. There's no time at all.
Clock for the New Year, crocheted
Knitting is a hobby for many people, and in preparation for the New Year, it will come in handy. It is enough to make all the bases in accordance with the diagram and fasten them together. All that remains is to add arrows cut out of cardboard to complete the look.
DIY New Year's watch ideas for the competition: photo
And finally, we offer you some original ideas for creating a New Year's watch. All presented models can be easily made using all the methods that we introduced you to in our article.
Idea #1 Idea #2 Idea #3
Idea No. 4 Idea No. 5
Large New Year's clock for a home photo zone - DIY New Year's decor
What holiday would there be without photos? That's right, none. And to get unique photos, you can make your own photo zone with a homemade holiday clock.
Clock for New Year's photo zone on the wall
From sheets of black or other paper that is quite dark and stands out against the background of the wall, you need to cut out numbers and stick them like a dial on the wall. To complement the surroundings, you will also need to cut out arrows from whatman paper or other dense and large material, which will serve as part of the composition in the hands of those taking photographs.
How to make a beautiful New Year's clock from disks?
The easiest way to make a clock from a disk is to simply take it, secure it on a string, and then use a marker to draw a dial on it. As a result, you will get a simple craft that can be used to paint a Christmas tree.
If you want to surprise others with a more interesting decoration, then don’t be lazy and make a more complex figure from the disks. After they are well fixed to each other, all you have to do is decorate them accordingly and attach arrows to them.
Another good option is to cover the disc with a ready-made holiday dial. In order to make such a watch, you will need to print a stencil to the required scale, cut it out and carefully stick it on the disk. As soon as everything dries well, you can attach a rope by which the decoration will be hung, and place it in any place convenient for you.
