How to make a broom from plastic bottles with your own hands: Step by step

How to make a broom from plastic bottles with your own hands?
Tell me, have you ever seen a broom made from plastic bottles? If you read the article to the end, you will not only see it, but you can also do it yourself. Most summer residents who have garden paths made of concrete or paving slabs know that keeping them clean is not so easy. This is especially true after it rains, since the soil that has fallen off the shoes dries to the concrete. In this case, a broom with stiff bristles will help you. Such copies can be easily found on sale, but they cost a lot.

Another option is to cut down the willow thickets, take twigs from them and make an excellent rustic broom. But there is a much simpler option - make a broom from plastic bottles. Let's try!

Method 3. Broom made from dry branches

Among other things, a beautiful and quite lush broom can be made from dry twigs collected in an autumn meadow or field. To make it you will need the following materials:

natural jute twine
sharp pruners or scissors
dry twigs collected from dry bushes or herbs

Progress:

Gather the lush branches into a bunch, cutting off the long ends.
Choose the longest and strongest branch, making it the basis for a broom.
Tie all available branches around it, wrapping the latter several times with jute twine.
If necessary, trim the shape of the broom in sectors. The decorative decoration is ready.

Buying a broom, broom, brush. What should you pay attention to?

When deciding to buy a broom for cleaning the area around the house, you need to pay attention to two important elements that can affect the functionality of the tool: the stick and the brush itself

Stick length

Theoretically: the longer, the better, but every extra centimeter is, first of all, an unnecessary burden on our muscles. Therefore, it is better to choose a broom with a stick of such length that it suits your height.

When choosing a rubber broom, a cobweb brush, or a dust brush, it is recommended to consider tools with a telescopic (retractable) stick. This design is especially convenient if the tool will be used by several people of different heights. The weight of the broom will be the same, but everyone will be able to adjust the length of the stick to their needs, making the work more comfortable.

It is better to purchase a broom, broom and brush on a long stick separately. Such tools will be especially useful for cleaning in hard-to-reach places, where the length of standard-sized products is insufficient (for example, when cleaning under furniture, shelving, etc.).

Scoop

Some models of brooms and brooms with a long stick are sold with a dustpan attached to the stick. A brush with a dustpan on a stick allows you to immediately sweep and collect dirty debris without bending over, which not only increases the comfort of work, but also reduces the time required for cleaning work.

Brush

When choosing a tool for sweeping an area, also pay attention to the hardness and elasticity of the brush. Its fibers must be properly processed, rounded, they should not be too soft or too hard

Well, of course, ask the seller what material it is made of - it is important that it is strong, durable and safe for health. Sources

Sources

https://kliningovyj-raj.ru/uborka/metla-dlya-territorii/
https://stroy-podskazka.ru/metly/berezovye/
https://stroitelcentr.ru/instrukciya-kak-sdelat-metlu/
https://strazhchistoty.ru/cleaning/cleanterritory/metla-dlya-ulic.html
https://stroy-podskazka.ru/metly/raznovidnosti/
https://HouseChief.ru/iz-chego-delajut-veniki-dlja-podmetanija-pola.html
https://sdelatlegko.ru/kak-sdelat-metlu/
https://mirputeshestvij.mediasole.ru/7_schetok_dlya_pola_i_venikov__plyusy_i_minusy_sovety_po_vyboru_venika_dlya_podmetaniya_pola
https://Nedvio.com/chem-ubrat-listya-i-gryaz-s-dorozhek-na-uchastke/

Materials and tools

Before you begin, you need to prepare the components for a homemade broom and tools.

You will need the following:

plastic bottles (from 1.5 to 3 l);
wooden stalk;
strong wire;
nails or screws;
knife;
awl;
hammer or screwdriver;
scissors.

Bottles can be of any capacity, except 5-liter bottles

Before starting work, you should pay attention to their condition. They should not be wrinkled or have any bulges or depressions. It is better to choose standard flat bottles

It is necessary to take into account that the wall thickness of bottles may vary. For example, beer drinks will be thicker, while mineral water or lemonade drinks will be softer and thinner. The density of the material is also affected by the volume of the container - larger bottles have thicker walls

It is better to choose standard, flat bottles. It is necessary to take into account that the wall thickness of bottles may vary. For example, beer drinks will be thicker, while mineral water or lemonade drinks will be softer and thinner. The density of the material is also affected by the volume of the container - larger bottles have thicker walls.

What components are required?

The main advantage is that creating such a broom does not require a lot of money. Therefore, this option is perfect for those who like to save money. All the necessary components are found in almost every home, which means that a trip to the store is not necessary. The set of tools is quite simple, and even children are allowed to work with them.

So, to create a broom you will need:

plastic bottles (preferably 2 liters) – 5-8 pieces;
a stick that will serve as a handle;
some strong wire;
nails/screws – 2 pieces;
hammer/screwdriver;
stationery knife;
awl;
scissors.

Once all the necessary elements are collected in one place, you need to get to work.

Assembling a broom in 5 minutes

A garden broom should have a strong and light handle. It’s hard to think of anything better than wood, especially since it’s the easiest way to attach our rods to it.

Approximately 10 cm from the tip of the cutting you need to secure a 2 cm wide ribbon from the same plastic bottle. The length of the tape must be at least 1 m, and it should be secured using staplers. Our double rods must be strung on this tape. Just hang them with a fringe at the fold, alternating different colors. Now you need to wrap this fringe around the handle

It is important to ensure that it rolls evenly and that the rods do not jump out of the general line. The tighter you wrap it, the stronger the broom will be. Wrap the free end of the tape tightly around the handle and rods several times. Secure the end of the tape in the handle directly through the rods with a self-tapping screw with a large head.

Master class on making a broom

You can make a broom from plastic bottles in different ways. Let's look at the most popular of them.

Option 1

Creating such a product will require a minimum of time and materials.

To work you need:

5 two-liter plastic eggplants;
a stalk or a suitable stick;
strong wire;
a pair of nails and a hammer;
knife and scissors.

Step-by-step instruction:

Using a stationery knife, cut off the neck of one bottle, stepping back a little from the edge.
We cut off the bottom in the same way.
Using scissors, cut the workpiece into strips 1 cm wide, not reaching the edge about 6 cm.
We repeat all the steps with other containers, leaving only two untouched.

With one of the whole bottles we do the same as with the others, but we do not cut off the neck.
On the blank with a neck we place all the other parts of the product without a bottom and neck.
We flatten the resulting part of the broom, giving it a flat shape.
Cut the remaining bottle in half and use scissors to make cuts in the half with the neck to the middle.
We place the part from step 8 on the previously made workpiece. We pierce the future broom in two places with a nail and fasten it with wire.
We secure the handle and use the broom for its intended purpose.

This broom is the simplest and is suitable even for beginners.

Option 2

Another option for making a broom for the garden is also possible.

For the product you need to prepare:

20 eggplants for 2 liters and one for 1 liter;
holder;
self-tapping screw

Manufacturing technique:

We cut two-liter bottles into strips 5 mm wide, for which you will need to make a homemade bottle cutter.
During the cutting process, we wind the tape onto a piece of chipboard measuring 250x300 mm. The tape should be wound as tightly as possible and tied together with a knot.

After winding is completed, screw a self-tapping screw into the board and tie the edge of the strip to it.
To make the tape more rigid, pour boiling water over it. You can also use a hair dryer. As a result, the tape will curl into tubes and become stiffer.
Having completed the shrinkage, we cut the material one end at a time.
We hang the ribbons bent in half on a plastic strip of larger width, collect them into a ring and tie them.
We straighten the bundle and tie it with a ribbon just below the bend.
Cut off the bottom and neck of a 1 liter bottle and insert a bunch into it. We stuff the workpiece onto the holder.
We compress the bunch in a yew, level it, and shrink the top bottle using a hairdryer. We fix the broom on the handle with a screw. We cut off the part of the bottle that remains uncrimped with a knife.
We cut the edge of the broom evenly with scissors so that there are no bends.

This panicle has medium hardness. It works great on smooth surfaces. If you plan to clean asphalt with holes, it is recommended to make the tape 10 mm wide. During heat treatment, it is also twisted into tubes, thereby obtaining higher rigidity.

From the video you can learn more about how to make a broom from eggplants:

From plastic rods

For manufacturing, you will need to assemble a device for cutting bottles into strips, which will then be processed into rods. To build such a product, a slot is made in a small block, the depth of which corresponds to the width of the plastic tape.

We fasten the blade of the stationery knife at an angle with self-tapping screws. We make a small hole in the bar and insert a strong wire, which is used as a bottle holder.

To get strips from the eggplant, cut off the bottom and make a cut with scissors, which will be the beginning of the strip. Then we thread the edge into the slot of the bar and gently pull it towards ourselves.

We make strips from 10-20 plastic bottles, after which we move on to making a broom:

Using a hair dryer, heat the edge of the tape and twist it a few centimeters. We clamp this edge into a drill or screwdriver, place the tape over the included hair dryer and twist the tape into rods.
We cut long rods into 70 cm lengths.
Heat it with a hairdryer and bend each rod in the middle.
We cut a wide ribbon about 1 m long from a plastic bottle and attach it to the handle.
We hang the rods on the tape in the form of a garland, after which we wrap the handle with the rods and tightly tighten the entire product with the tape, securing it with a self-tapping screw. To better tighten the rods, the tape can be heated with a hairdryer.
To make the tool more convenient to use and look like a broom, the rods will need to be slightly fluffed.

As the owner of a summer cottage, a country house, or a workshop, it would be useful to acquire such a useful tool as a broom, but it is not necessary to buy it. All you need to do is collect a dozen plastic bottles, which will make an excellent broom, and interesting ideas and step-by-step instructions with photos will help you figure out how to make one with your own hands for beginners.

Creation technology

It will take you about an hour to produce, give or take. There is nothing difficult about the work. The main thing is to follow the instructions and do the work carefully. For your convenience, we have made step-by-step instructions to help you. So, let's look at the creation step by step:

Take the first bottle and a utility knife. It should be sharp. Cut off the neck from it, stepping back a few centimeters from the top.
Cut off the bottom of the plastic container in the same way. Advice! Work carefully to avoid injuring your hands. Plastic is a soft material, so it lends itself well to processing.
Now you need scissors. Each broom has twigs or stems. Your job is to create these stems. Using scissors, start cutting the workpiece lengthwise, from bottom to top. The width of each strip is approximately 0.5–1 cm. Do not cut it to the very end. Move just above the middle, leaving about 6 cm at the top.
Process the remaining bottles in exactly the same way. Leave only two of them untouched. Please note that the more products there are, the thicker the broom bundle will become. It will cope with cleansing more effectively.
So, at this stage you have 3 or 5 pieces ready (depending on how much you initially stocked), the neck of which is cut off, and the rest is cut into strips. You also have two untouched plastic bottles. Take one of them and, without cutting off the neck, do the same as with the rest.
Your bottle broom is almost ready. Take the blank with a neck and begin to insert it one by one inside each part made without a neck. The product with a neck will fit freely into the prepared hole. Install all workpieces completely.
Basically, the bottom part is ready.
It remains to be bent (flatten) to give shape. But we will not stop there, but will improve it to make it beautiful and practical. Take the remaining bottle, preferably one with a high neck, and cut it in half with a utility knife. We only need the top part. Advice! Don’t throw away the lower part; you can use it to make a tabletop or hanging pot, a container for pens, an owl or a ladybug.
In the desired part, use scissors to make two cuts on each side, opposite to each other. Make the cut approximately to the middle of the plastic part.
The finished part needs to be placed on a blank made from the remaining bottles.
Using a large nail (50 or 100 mm), sew the product in two places in a horizontal plane. You can use an awl. It takes effort. Insert the wire into the holes formed and firmly tie all the layers together. It should turn out as shown in the photo.
That's all, the product is almost ready. All that remains is to attach the stalk to it. The stick should fit into the neck of the bottle not loosely, but tightly. To control the thickness, trim it using a regular knife.
When the stick enters the neck, all that remains is to secure it with nails or screws so that it does not fall out or spin. The nails will securely secure the handle, and the broom will be one piece.
For reliability, it is better to use not one, but two or three nails. They need to be driven into the neck with the stem inserted. For better fixation, you can use small self-tapping screws.

You have successfully created a device. A do-it-yourself broom made from plastic bottles will do the job perfectly. You can use it to sweep the yard, room, paths, etc. Create several brooms and surprise your friends with your skills. To make it clearer how to properly make a broom from plastic bottles, check out this video.

Making a broom

Let's take a step-by-step look at how to make a panicle out of 18 bottles.

Bottles must be prepared: rinsed, removed labels and allowed to dry. We take only 17 bottles for work, leaving one aside for now.
We cut off the bottom of the selected plastic bottles. Then, using a sharp knife (or a stationery knife), cut them lengthwise into strips 0.5 cm wide. We move our hands from bottom to top. We do not cut it all the way, leaving about 6 cm to the neck of the container.
You need to work very carefully, since the plastic is soft, the tool can slip at any time and you will injure your hand.
You should get 17 cut pieces. Then we cut off the necks of sixteen of them. One remains with the upper part intact.

On a container with a whole neck we put the resulting cut blanks, the upper and lower parts of which have been cut off.
It was time for the whole bottle. We cut off the upper part, retreating about 15 cm from the throat. We will not need the lower part; it can then be used for other purposes. We put the resulting blank on the base of the future broom, already made from 17 bottles.
Using an awl, you need to pierce all the bottles through and thread a piece of wire, the ends of which are then tightly twisted.

Now we work with the cuttings. It will need to be trimmed so that it can be threaded into the neck of the bottle. Paste it. The stalk should fit tightly. Using a hammer and nails, we secure the handle with the bottleneck. You can use a screwdriver and screws. The broom is ready to go.

The second method is to cut spirals

So, a broom from plastic bottles can be made with your own hands using a different technology. To do this, you should cut a plastic bottle into a spiral shape. Before starting the operation, you should completely cut off the neck and bottom.

Important! You can safely throw away the cut-off elements from the bottom, but save the necks for now; they will be needed to form a future broom from a bottle with your own hands.

So, you should get some kind of plastic cylinders. These are the ones you should cut into a spiral from. The width of the strip should be about 5 mm. It is important that this size is maintained along the entire length of the spiral. For cutting, it is better to use a sharp knife or scissors.

The resulting spirals must be heat treated. To do this, you can use different tools and materials, for example, a gas burner, a blowtorch, a candle or something similar. Thanks to this, the spiral will acquire the necessary hardness.

Important! Remember, you need to heat treat the plastic, not melt it.

So, straighten one spiral over the heat source. Gradually, the spiral should align. Alignment will be possible by bending the two longitudinal edges. So, all your spirals must be absolutely even. The resulting plastic pieces should be cut into pieces of twenty centimeters each. Next you should take the set aside necks.

The necks should be cut so that they can be glued together in pairs. As for the choice of glue, plastic cannot be glued with every adhesive. For example, on a large number of adhesives there is an inscription - prohibited for PET. Otherwise, the glue may eat away at the plastic instead of holding it together. The optimal glue is the usual moment.

When the necks glued together have dried, these blanks will also be needed. The middle of this sleeve should be tightly filled with aligned twenty-centimeter pieces of plastic. It is important to ensure that these blanks do not fall out during sweeping. To do this, take one lid and pour a small amount of instant glue into it. Next, carefully close the neck with the inserted plastic rods. Place the neck on a solid base, and press the rods tightly so that they are completely immersed in the glue in the lid. Then, turn the lid upside down so that the glue penetrates a little through the plastic strips. After a quarter of an hour, unscrew the lid. You need to wait until the adhesive on the plastic container has completely dried.

Now let's take the base for the broom. It can be a rectangular block. It is necessary to screw plastic covers to it with self-tapping screws. First, make holes in the lids with an awl, since without this the lid may crack when tightening the screw. So, screw several caps from plastic bottles in a row onto the base of the broom. They can be screwed not in a straight line, but mixed in a zigzag. The number of caps you have screwed on is exactly how many you should make the blanks described above.

When the glue on the first piece has dried, screw the neck to the lid. So, you should make several of these blanks. In each case the process will be repeated. After a few preparations have been made, everything will be done automatically, so there are no particular difficulties in making this type of broom from a plastic bottle.

Again, it is worth reminding about safety precautions, because you will have to work with a sharp knife, and, possibly, with an open flame.

Making a broom

Let's take a step-by-step look at how to make a panicle out of 18 bottles.

Bottles must be prepared: rinsed, removed labels and allowed to dry. We take only 17 bottles for work, leaving one aside for now.
We cut off the bottom of the selected plastic bottles. Then, using a sharp knife (or a stationery knife), cut them lengthwise into strips 0.5 cm wide. We move our hands from bottom to top. We do not cut it all the way, leaving about 6 cm to the neck of the container.
You need to work very carefully, since the plastic is soft, the tool can slip at any time and you will injure your hand.
You should get 17 cut pieces. Then we cut off the necks of sixteen of them. One remains with the upper part intact.

On a container with a whole neck we put the resulting cut blanks, the upper and lower parts of which have been cut off.
It was time for the whole bottle. We cut off the upper part, retreating about 15 cm from the throat. We will not need the lower part; it can then be used for other purposes. We put the resulting blank on the base of the future broom, already made from 17 bottles.
Using an awl, you need to pierce all the bottles through and thread a piece of wire, the ends of which are then tightly twisted.

What does assembling a broom look like in practice?

The third, upper part of the broom from the bottle is pulled onto two previously prepared and already connected and cut containers. The tops of the bottles are leveled, making sure that they fit tightly on top of each other. In the process of making brooms from plastic bottles, additional fastening is performed.

A nail is driven across the bottles so that it pierces all three plastic bottles in a horizontal direction. The end of the nail protruding from the other side is bent so that it does not touch objects during operation of the broom. The sharp edge of a nail can easily scratch the surface or damage the coating.

The same operation is carried out in the opposite direction, placing the nails close to each other, but not forgetting that there should still be a holder for a broom made from plastic bottles with your own hands.

Assembling a broom in 5 minutes

A garden broom should have a strong and light handle. It’s hard to think of anything better than wood, especially since it’s the easiest way to attach our rods to it. Approximately 10 cm from the tip of the cutting you need to secure a 2 cm wide ribbon from the same plastic bottle. The length of the tape must be at least 1 m, and it should be secured using staplers. Our double rods must be strung on this tape. Just hang them with a fringe at the fold, alternating different colors. Now you need to wrap this fringe around the handle

Making a broom with your own hands

So, let's first select the base of the broom. An old brush is suitable for this, and you can use either a wooden or plastic base. If you don’t have an old brush, this is also not a problem: cut it out of a suitable board, the length of which is from 25 to 30 cm, the width is 5 cm and the thickness is about 2 cm.

If you have chosen an old brush as a base, this area must first be “shaved”, that is, get rid of the remnants of the old stubble. This operation can be easily performed using a utility knife. The fibers should be cut flush to the base. In this case, you will still have the base of the bristles inside the brush, but this is not a problem and will not interfere at all in the future. The main thing is that nothing sticks out.

Also, to make a broom from plastic bottles, you will need the main raw material for a broom - plastic bottles. Samples of almost any capacity are perfect for this - from 1.5 to 3 liters, but the main condition is that the bottle is not wrinkled and has a cylindrical shape in the central part, without depressions, grooves, etc. By the way, for this reason, five-liter eggplants are unsuitable, since they usually have concentric grooves along their entire height, i.e. stiffening rib.

Please also keep in mind that the thickness of the bottles varies. Beer bottles are considered thicker, but containers for mineral water and lemonade are much thinner. The thickness largely depends on the volume - with a larger displacement the walls are thicker.

So, take a plastic bottle, remove the label, rinse the inside and let it dry. Next, you need to cut it using a stationery knife - cut off the neck with the plug and the central cylinder. You need to cut off the neck below the wide ring into which the cork rests. The bottom and the body itself are of no use to us. For waste-free production, the most that can be made from them is a bowl and funnel for your beloved cat.

Now from the cut part we need to get a fishing line for making bristles. To make a good broom from plastic bottles, we cut an even strip from the cylinder. This can be done with scissors, but the process will be longer and more tedious. To speed things up, you can make a convenient cutter.

The first method is two-liter bottles

In the first case, you will need to collect quite a few eighteen two-liter plastic containers. To do this, you should prepare the following set of building materials and tools:

A sharp stationery knife.
Awl.
Hammer.
Nail.
Scissors.
The wire is soft.
Broom handle.
18 two liter bottles.

So, if you already have everything at hand, then let’s look at how to make a broom from plastic bottles step by step. According to some estimates, not everything is about everything, it will take you about two hours. Let's get started:

Seventeen bottles need to have their bottoms cut off.
Next, use scissors to cut the prepared container lengthwise into 20 mm strips. but not cutting to the neck by approximately 60 mm.
This procedure should be performed on all remaining sixteen bottles. Let only one remain temporarily unchanged.
Then you take these chopped containers and cut off the necks of all of them, leaving only one.
Now you hold a bottle in your hands that has a neck. On top of it you put sixteen bottles without a neck. During this process, care should be taken to ensure that the cut elements do not bend.
At the next stage, you need to take a completely intact container.
You should cut off the top part from it. To do this, measure 150 mm from the edge of the neck. The cut should be smooth.
From above you put all the collected bottles together according to the principle of one into the other.
In the next step, take an awl. For one piercing you need to pierce a hole. The hole must be made at a distance of 150 mm from the edge. Make a hole in two places.
Through these holes you insert a wire that should be tied together. The protruding remains of the wire should be cut off with wire cutters.
Next you need to prepare a wooden cutting. Its diameter should be equal to the internal diameter of the neck of the container.
Having stripped the handle to the required diameter, thread it into the neck of the plastic container until it stops. The plastic container should sit tightly on the handle and not wobble.
After this, a hole should be made in the neck in place of the existing thread. It will be necessary to screw one self-tapping screw into this hole so that the broom made from a plastic bottle is securely held on the wooden handle.

This is the simple way to make a broom from a plastic bottle. When working, it is important to follow several important requirements or even safety rules. If you have ever had to cut a plastic bottle with a knife, then you know that the knife can sharply go in the wrong direction. For this reason, it is easy to cut your fingers or hands. Moreover, when cutting strips with scissors, it is important to ensure that they are the same size.

So, now let's look at the second manufacturing method.

Processing the neck of plastic containers

If the previous steps were duplicated and did not differ in any way from the sequence of cutting a plastic bottle, then something new is coming next. The top of the second bottle is cut off. To remove the neck, use a stationery knife.

Important! Cut off the top carefully, otherwise the strips will fall off and you will no longer use this bottle. The first bottle is pushed into the second, as if putting it on

Make sure that the neck of the second bottle fits properly through the first, center the structure, giving it the correct appearance

The first bottle is pushed into the second, as if putting it on. Make sure that the neck of the second bottle fits properly through the first, centering the structure, giving it the correct appearance.

Then they prepare the next bottle.

Important! The more plastic containers you take, the more magnificent the broom will be. The top of the bottle with the neck is also cut off

It is this part that will make up the upper part of the future broom made from plastic bottles with your own hands. They do it this way: taking a stationery knife, cut off the bottle by 2/3 from the bottom. At the same time, enough space is left so that the third part of the structure can hold the previous two

The top part of the bottle with the neck is also cut off. It is this part that will make up the upper part of the future broom made from plastic bottles with your own hands. They do it this way: taking a stationery knife, cut off the bottle by 2/3 from the bottom. At the same time, enough space is left so that the third part of the structure can hold the previous two.

Cutting the noodles

After the frames have cooled, it is necessary to cut the plastic string on one side. As it is shown in the photo. After this cut we will be able to remove the entire piece of plastic rope from the frame. But don’t rush to do this, look at the next stage.

Making a cutter for making strips from a bottle

Now, you need to step back 0.5 cm from the bottom edge of the slot, and make a horizontal cut perpendicular to the first cut, the depth of which will be 1.8 cm. This will be the place for the knife. As a cutting knife, use a piece of blade, for example, from the same stationery knife with which you deftly dealt with the bottle. A piece should be cut off from the blade, slightly shorter in length than the width of the beam, inserted into the slot and secured with two screws. Ready! Next, we begin the process of making long ribbons from a plastic bottle. The edge of the cylinder should be cut with scissors, and thus make the beginning of the tape. A cut length of 10 cm and a width of 0.5 cm will be sufficient. Now the beginning of the strip should be inserted into the cutter, but UNDER the knife. Take the device in your left hand, and with your right you just have to pull the tip of the strip. The bottle will begin to rotate, and a smooth ribbon will appear from under the knife.

It is important that you pull smoothly, without any jerking. Hooray! We have a long polyethylene ribbon.

And it would seem that a broom made from plastic bottles with your own hands is not so difficult to make, but there are some nuances. The ribbon-shaped blank is soft enough for a broom, and still retains its ring shape. To give the tape certain characteristics, heat it. This is easy to do if you use a candle, gas burner or blowtorch.

We will consider leveling using an example using a gas stove. Take the tape in your hands as far as your arm span allows, and move it smoothly and evenly over the fire source. When heated, it will straighten, the edges will curl inward, and now in cross-section it will not be flat, but semicircular. The main thing when heating is to choose the ideal pulling speed, because if you pull quickly, the tape will not have time to warm up and straighten, and if you hesitate, you will burn through it, and it will melt and tear.
In the photo comparisons you can see that at first the tape was soft and twisted, and then it became straight and hard. Now we have a great ribbon made from a plastic bottle! All that remains is to collect the broom.
The broom itself consists of many individual panicles. Their number depends on the size of the base of your broom. For the above sizes, only 9 panicles were needed. The finished fishing line should be cut with scissors into equal lengths of 20 cm. Now you need to take 2 cut necks from PET bottles and glue them together. So, we need to glue the necks together, and for this we will use glue like “BF” or “Moment-classic”.

After drying, the resulting sleeve should be filled with bristles, that is, already prepared pieces of fishing line. The number of twigs that fit into one bushing is unknown, but it needs to be packed tightly. Next we fasten it in the sleeve. To do this, you need to move it to the middle of the bundle, and coat the ends with the same glue that you used before to the full depth or a little more.

By the way, instead of glue, you can use ordinary sealant from a tube - when hardened, it will reliably fix all the twigs. Next, return the sleeve to the edge of the bundle and leave it alone until it dries completely.

While all the elements for the broom made from plastic bottles are drying, prepare the base: screw screws onto it with plugs, with 2 screws for each plug, and place them along the line of the broom. This will ensure that they will not be torn out when sweeping. Please also take into account that due to the rings that protrude on the bushings of the panicles, the plugs should not be fixed close to each other, but with a small distance of 0.4-0.5 cm.

They can be arranged in one line - the broom will then be thin, or it can be arranged in a zigzag, and then the working thickness will be 2 times thicker. When everything is dry, you can collect the panicle. To do this, screw them into the plugs that are located on the base. Now you just need to attach the handle and you can carry out your first test!

After the first use, we can safely say that the broom perfectly cleans concrete and asphalt, and if necessary, it can perfectly clean even snow compacted by car wheels, which even a snow shovel cannot always cope with.

But this is not the end of making a broom from plastic bottles with your own hands. The necks of the bottle need to be cut off along the lower edge of the ring, but since the material in that place is too dense, use scissors or a knife. To make combing easier and faster, you can use a simple device that requires only a cork.

Make a hole in the center with a diameter of 0.5 cm. Insert a bolt of the same diameter into it, insert a cap inside the lid, secure the lid to the bolt with a nut and enhance the effect with a washer. Now all that remains is to insert such a template into the drill chuck, tighten the neck and you can easily cut off the excess.

New ideas for flowers for the garden and vegetable garden from bottles + schemes

This flower can decorate a pond or the area around it. What if there is no pond? It's easy to create! You can plant plastic bottle caps painted blue on concrete!

Cut the bottle in half. We cut the part where the neck is into 8 strips.

Bend the strips 90⁰.

We make the edge of each strip look like a leaf by cutting off the corners.

We cut the edge of the second part of the bottle with sharp, shallow (2.5-3 cm) teeth.

Cut off the bottom of another bottle. And we make exactly the same teeth cuts in it.

We will need the middle of the second bottle. Cut it lengthwise to get a rectangle.

We paint the first part green. The other three are red and orange. Assembling the flower design. Roll the rectangle into a tube. We thread it through the neck of the first part.

Glue the bottom of the second bottle to the bottom of this tube.

We glue the lower part with the bottom from the first bottle on top of the structure to the green part.

A very simple model that even a beginner can do. At the same time, the flower turned out to be elegant and large. By the way, for painting you need to choose a paint that is waterproof so that it is not afraid of rain and moisture.

New ideas for flowers for the garden and vegetable garden from bottles. Author https://www.youtube.com/watch?v=L56LZZHYf8k

The second version of a flower from a bottle neck. We make 7-8 rounded petals on the top of the bottle and bend them.

Using PVA glue we glue paper or toilet paper. If there are irregularities, this is even a plus; the texture of the flower will be more interesting.

We glue the petals on both sides. When the glue dries, paint it with beautiful waterproof paint, acrylic can be used. If you plan to keep the flower in the open air, then you need to cover it with 2-3 layers of varnish.

We fix the wire in the lid by bending it into a loop.

Screw the lid on and glue 3 cotton swabs and a pompom into the middle of the flower.

Flowers are ready to decorate your garden.

Author https://www.youtube.com/watch?v=LlwlX2AGbkU

Here are some more beautiful flowers made from shampoo bottles. The petals are cut out, the edges are processed over a candle, we bend the petals a little after heating to get a wave at the edge and in the middle along the petal.

Using hot glue, we assemble a flower from 2 rows of petals - 4 large ones overlapping, inside a circle of 4 small ones glued overlapping.

All that remains is to glue the stamens. You can buy them, or you can make them yourself. To do this, apply a drop of hot glue to the edge of the wire and dip it in glitter. You can also make it from PVA, but it will take a long time to dry.

Beautiful flowers from bottles. Author https://www.youtube.com/watch?v=9_WHmwKQQCg

Look what kind of curtain you can make from bottle bottoms. We cut the bottom along the concave lines on the bottle, rounding the petals. We process the edges and the flower is ready.

Another incredibly beautiful and easy-to-make flower from the site. Cut off the bottom of the bottle, form petals and curl the edges with a candle.

We tint it with paints or varnish.

From the middle part of the bottle we cut out a flower with five petals of smaller diameter.

Paint it with a contrasting color.

Using a heated screwdriver, make a hole in the middle and thread the bead onto the fishing line.

We also thread a fishing line through the large flower and secure it with hot glue.

Here's a real palm tree from a green bottle.

https://youtube.com/watch?v=9ju1vS11RCA

And here is an incredibly beautiful and lush flower.

Here are some more beautiful and simple flowers from the bottoms. It looks very cool when there are a lot of them.

What do you think of this idea?

Broom made from branches

This is probably the most ancient and simplest option. Our ancestors answered the question of how to make a broom from branches very well. They took twigs of a fairly strong tree, such as hazel or willow, tied it into a bundle and tied a holder to it. It turned out to be a good broom.

The whole procedure took a minimum amount of time, and the size of the broom was regulated by the number of rods.

The advantages of such a broom include:

minimum costs
fast production

But this broom also had disadvantages:

Fairly quick wear
The need to select flexible but durable wood
This broom is afraid of moisture and quickly becomes unusable in water.

What can you use to make a quality broom for the yard?

When spring comes, probably every gardener begins to think about cleaning up accumulated garbage, litter and fallen leaves, remnants of old grass and other vegetation in their garden plot. As always, his assortment includes: a pitchfork, a rake and a broom. Today we'll talk about the broom. More than one rural farmstead and city yard cannot do without it. Therefore, if you do not have such a unit, then you should definitely get one. The easiest way is to purchase it in a store for a few hundred of our rubles. And there is a slightly more complicated method. For example, make it from soft and elastic branches of twigs, flexible wood (elm, elm, birch, fir). Well, the most incredible thing is to make it yourself from plastic bottles that are in every home. A good positive aspect of the latter method is caring for nature and our environment by recycling plastic waste. In this article we will tell you how to make a broom from plastic bottles.

Step-by-step instructions for creating a broom from bottles

So, let's get down to the question of how to make a broom from plastic bottles step by step. To get started, we will need the following materials:

Eight plastic bottles with a volume of two liters. You can use more, in which case you will get better bristles on the brushes and, as a result, better capture of debris,

A cutting (suitable from an old shovel, hoe, rake or something else; if not, you’ll have to buy it at a hardware store),

Wire, hammer, nails, stationery knife, awl, stationery scissors and axe.

Progress:

If you don’t know what to make a broom for the yard from, then use our information. When all the necessary tools are collected at hand, you can start working.

We cut out the bottom of all plastic eggplants with a stationery knife and cut them into strips along the neck of the eggplant with office scissors. The width of the strip is half a centimeter, and the length before cutting to the neck of the bottle is six to eight centimeters.

We cut out the neck of six eggplants with a stationery knife, and leave the seventh untouched with a neck, on which we string six eggplants without a neck.

For the eighth eggplant, use stationery scissors to cut off the neck of 13-16 centimeters and string it onto seven bottles and pierce two symmetrical holes with an awl. We thread the wire into these holes and carefully tighten the two ends of the wire on the other side.

We fit the cutting into the neck; if it doesn’t fit, you need to trim it with a hatchet to the diameter of the neck of the plastic bottle and fit it tightly so that you then need to take a hammer and nail and pierce the neck of the bottle and thereby secure it to the cuttings.

That's all, our broom is ready, you can start working on it.

Another option for making a broom

Want to know how to make a broom at home? Then quickly get acquainted with another version of the product. There is a more complicated version of a homemade broom, more like a brush broom. You don't need anything complicated to make it. First you need to extract the raw material from a bottle, PET tape, using a bottle cutter, and then make a broom brush from the tape.

And so let’s begin to consider this option. We will need:

bottle cutter,
fused tape from PET bottles,
construction adhesive 88,
neck from a plastic bottle (7 pieces),
double-sided twist
lid from a plastic bottle (7 pieces),
seven screws,
shaped screwdriver,
a larger block and a smaller block with a small hole,
cuttings

The main device here is a bottle cutter. There are many variations of drawings floating around on the Internet that can be used in the manufacture of this product.

If you don’t have: a block, a corner, a knife, an ax, then we will need 3 self-tapping screws, a blade from a stationery knife, 4 nuts and 4 washers. You can use either nuts or washers. And I cut off a board or a piece of chipboard (whatever is at hand) for the base on which all this will be attached. You need to take a screw (the length needs to be calculated so that it doesn’t come out on the other side), put a washer, a knife from a stationery knife, a washer and a nut on it and screw it into the board, similarly, the second knife will just rest against the screw between the washers.

Then take the third screw and fix it on top in the same way as the second one and now the knife blade is not movable, you can try to extract the tape. To do this, cut off the bottom of the eggplant exactly, and make a small notch with scissors, then insert it into this notch, gently scroll the blade, the tip of the tape will come out, and begin to gently pull on it. And after that, almost the entire eggplant turns into tape, which then needs to be thermally treated. This can be done: on fire, or in water, or with a hair dryer. So that it settles and decreases in size.

After heat treatment, the tape became more durable; it is cut into equal lengths of 25 centimeters, tightly stuffed and compacted, and the edges are aligned into prepared and sanded necks from eggplants in the amount of 7 pieces. We put a double-sided twist on top and take out the neck.

Next, use a block to align the edges so that there is a 4-6 millimeter indentation in the twist and pour construction glue 88 and then use a block to level the tape and twist. As a result, we repeat this 7 times.

While the edge is drying, let's move on to the second part of the broom-brush. You need to take a block and place 7 lids from under the eggplant on it, then drill a hole in the middle and screw it with a self-tapping screw, and then screw double-sided necks onto these lids with glued-in tapes from the PET bottle. The main part of the broom is ready, now you need to take another smaller bar with a hole and screw it to the larger one with the broom, and insert and secure the handle.

The video will tell you more about making a broom:

You can try cleaning up the trash.

Finally

The two options we have considered will help you with garbage collection. They are simple and effective, in conclusion it is worth sharing a small, but also simple option for the home, garden and vegetable garden - a broom made from plastic bottles. To make it, you also need to extract the tape, and then heat it.

Then take the ribbons and fold them into two (70 centimeters or 140 centimeters from the size of the broom you will make). Then a piece of a finger-thick branch from a tree is inserted into the tape to stiffen the handle, and they begin to knit like a regular sorghum broom, only the willow twigs are replaced by a tape from a plastic bottle. The resulting ties, knots and tapes are treated with fire or a hair dryer to shrink the plastic and tighten it. As a result, you will get a broom that is not inferior to a store-bought one. Moreover, it will be durable.

We think the considered examples of a broom and broom will help you in cleaning and removing debris from your home, yard and street, and the proposed material will help clean the environment from plastic containers (eggplants).

Making rods from plastic bottles

We have about 20 plastic bottles, 14 of them are mine from mineral water and 6, guess whose, are from beer. This was just enough for our idea.

All bottles need to cut off the bottom along the transverse line, which is present on all models

Next, the bottles need to be cut into strips. You can do this with simple scissors, but we have been using a homemade bottle cutter for a long time. My husband made it. Convenient item that is used quite often

The width of the stripes can be adjusted. For the broom, we cut 12-14 mm, this is enough.

An important tool for creating rods is a hair dryer. Only with the help of high temperature can the plastic half-shell be slightly melted and deformed. That’s why we called the broom “fiery”, since without a light we can’t cope with this. Instead of a hairdryer, you can try making rods over a stove or gas burner, but it will be more difficult to control the degree of heating.

Turn on the hairdryer and first roll the tip of the strip into several turns with your fingers.

The very tip, where there are no turns, needs to be cut off

This hard tip needs to be clamped in the chuck of a screwdriver or drill, and then it’s just magic. You need to rotate the strip over a hot hairdryer, holding it lightly with your fingers and forming coils. The finished rod needs to be held in a level position for a while until the plastic cools down. It is better to work with gloves, because the plastic slides better between your fingers and you are guaranteed not to cut yourself on it

All rods must be cut so that they are the same length

From 20 bottles we got about a hundred of these long rods, that is, from one bottle - 4-5 pieces

Each long rod must be bent exactly in half

To fix the bend, lightly heat it with the same hair dryer or with a regular lighter.

The rods are ready, you can start assembling the broom.

Attaching the handle to the broom

While the working part of the broom dries, you can start making the handle. To do this, you can use the most ordinary stick, which is made from scrap materials. The thickness of the handle should be about 3 cm. If possible, you can use a handle from another product that is no longer in use or has broken down, such as a rake.

The selected stalk should be sharpened at one end and adjusted in diameter so that it can be easily inserted into the neck of the bottle. Accordingly, the cap from the container is thrown away. You can use the remaining necks to adjust the handle while the working part of the broom dries.

The prepared cutting is inserted into the bottle and secured with insulating tape. The main thing is that the tape has sufficient adhesive properties. Instead of tape, it is quite acceptable, and maybe better, to use a self-tapping screw screwed into the area of connection between the handle and the working part of the broom, perpendicular to the entire product.

Additionally, you can compress the working part of the broom and tie the bundles of strips with wire. This will result in a broom that will have a wider working area.

Cutting

We put all this on the handle. And we work with a hair dryer. During the heating process, the outer bottle (liter) will settle and tightly fix the inner workpiece.

Notice that Giorgio uses a metal tool that helps him make the broom flat.

Additionally, we fix the broom on the handle with a nail.

Making a broom

Let's take a step-by-step look at how to make a panicle out of 18 bottles.

Bottles must be prepared: rinsed, removed labels and allowed to dry. We take only 17 bottles for work, leaving one aside for now.
We cut off the bottom of the selected plastic bottles. Then, using a sharp knife (or a stationery knife), cut them lengthwise into strips 0.5 cm wide. We move our hands from bottom to top. We do not cut it all the way, leaving about 6 cm to the neck of the container.
You need to work very carefully, since the plastic is soft, the tool can slip at any time and you will injure your hand.
You should get 17 cut pieces. Then we cut off the necks of sixteen of them. One remains with the upper part intact.

On a container with a whole neck we put the resulting cut blanks, the upper and lower parts of which have been cut off.
It was time for the whole bottle. We cut off the upper part, retreating about 15 cm from the throat. We will not need the lower part; it can then be used for other purposes. We put the resulting blank on the base of the future broom, already made from 17 bottles.
Using an awl, you need to pierce all the bottles through and thread a piece of wire, the ends of which are then tightly twisted.