Choosing paper for origami
Before you start folding the figures, you should decide what kind of paper is best to use. It is important to remember the basic rules:
- do not use paper that is too thick - folding it is much more difficult, the density of the craft is too high, so it does not look realistic;
- do not make unnecessary bends - try to bend all the corners correctly at once, as this will help maintain symmetry and make the appearance of the figure more presentable;
- You should decorate a ready-made figurine - this will help to avoid unwanted mistakes.
You can use either regular white paper or colored paper. In this case, you will be able to eliminate the need to paint the model yourself.
Expert advice
- It is better to use thicker and two-color paper.
- You can use colored or corrugated cardboard, as well as crepe paper.
- When making various origami roses, use sharp scissors and glue (it is advisable to use a glue gun).
- You may need wire cutters and thin brushes.
- You can enhance the effect of the product by using metallic spray paint.
Origami patterns: which one to choose?
Having decided which paper will be used for the craft, you need to start choosing a pattern. There are several different ways to fold a rose using the origami technique. Of course, those figures that were made using a more complex technique, using several paper folding techniques, look especially beautiful.
However, beginners should refrain from such experiments. Because there is a high probability that they will not be able to achieve a positive result. It is always better to start with the simplest scheme, gradually increasing the level of complexity.
Master classes on creating roses
Today we are going to get acquainted with master classes on making the most original models of crafts:
- A simple bud using the origami technique.
- Bouquet of fresh roses made of corrugated paper.
- Felt miniature hat crafts.
- Lush buds made of ribbons.
- Roses from colored napkins.
Each of the presented options is distinguished by its special grace, beauty and bright saturated colors.
A simple bud using the origami technique
To work, we only need a diagram with a detailed photo report, paper, scissors, glue and the creative spirit of the master. Let's prepare a work surface - a wide, comfortable table, and unfold a sheet of plain paper on it. Next we proceed according to the given scheme:
- A sheet of paper must be cut into long strips.
- First, we make modules for the bouquet.
- Fold the corner of the strip at one end. Repeat two or three more times.
- Now the next step is to roll the first curl, holding the tip of the corner.
- Now we repeat all the steps, alternating turning the corners and folding the bud.
From one strip we will get one bud. Make eight to ten buds of different colors, arm yourself with glue and a beautiful base for the applique. Another interesting option is to create a bouquet from a decorative wicker basket using illustrated paper. Place a sheet of illustrated paper on the bottom of the basket and place rose modules on top of it. For better fixation, treat each rosette with glue along the side surfaces.
Bouquet of fresh roses made of corrugated paper
Corrugated paper is an excellent material for creating crafts. To make a beautiful and colorful bouquet, prepare the following materials:
- Paper of various shades.
- Scissors.
- Glue.
- Packaging for a bouquet.
- Satin ribbon.
- Decorative elements (beads or rhinestones).
You may also need an iron during the process.
For further work, use the following instructions:
- Cut equal squares from corrugated paper. You will need quite a lot of them, about 10-12 pieces per bud.
- Use several colors to make the bouquet bright.
- We treat each square with a hot iron (the temperature should not exceed 60 degrees, otherwise the material can be damaged) and then slightly pull back the edge of the future petal. After cooling, the workpiece will take on an original and realistic appearance.
- Now we begin to form the bud. We will sew the petals together using thin threads of the same color.
- Each inflorescence needs to be decorated with rhinestones or large beads; if desired, you can open the product with transparent acrylic varnish.
- The final stage is packaging the bouquet in illustrated paper or forming an interesting wedding bouquet in the shape of a ball.
It is necessary to glue the buds together using a glue gun.
Felt miniature hat crafts
You can decorate a child’s hat for a holiday or a walk in an original way using miniature roses made of felt and guipure. For work we will need the following materials:
- Felt and guipure.
- Scissors, threads and needles.
- Template for rose petals.
To make beautiful rose crafts, use the following step-by-step instructions:
- Using felt templates, we cut out blanks for the petals.
- Each petal should be ironed, the edges can be stitched with shiny threads to create an original border.
- The petals need to be sewn together very tightly so that the product holds its shape on the hat.
- After assembling the inflorescences, you can begin to design the sepals. To do this, we cut round “skirts” from guipure, which we sew to the finished buds. Thus, our roses turned out to be quite lush and strong products.
All that remains is to attach the blanks to the hat using glue or thread.
Lush buds made of ribbons
Skilled needlewomen have come up with a way to create original wavy buds from wide satin ribbons. To work, use the step-by-step instructions:
- The edges of the ribbon should be scorched with a lighter so that the threads do not unravel in the future.
- Lay one of the ribbons in front of you, fold one edge with a corner.
- Sew along the fold line with threads of the same color, and it is advisable to use a thin seam.
- Make the next corner and stitch the fold line again.
- Alternate each step, repeating them sequentially until the very end of the tape.
- Now let's start assembling the bud. To do this, we begin to roll the stitched satin ribbon in a circle, forming an original inflorescence.
Satin ribbons allow you to create lush buds, known for their glossy shade. You can use such buds as decoration on a dress, handbag, craft, or as a bow on a hair tie.
Roses from colored napkins
For work we will need napkins of two colors: cream for the bud and green for the stem. We then follow the diagram below:
- Place a cream napkin in front of you on the table and bend the top edge 0.5-1.0 cm towards you.
- Now we take the upper left corner of the napkin with two fingers and begin to roll the bud counterclockwise.
- Lightly press the resulting inflorescence to secure it in the desired shape.
- We roll up a stem tube from a green napkin.
Most often, such buds are used on the festive table as decoration.
Textured paper for origami
It was mentioned above that white and colored paper can be used for origami. But modern needlewomen have found use for another type of paper. Textured sheets, which got their name because of their unusual structure, are ideal for origami.
Thanks to their use, you can ensure that crafts look as natural as possible. Especially if a complex scheme was used for their manufacture. Then the flowers will turn out not only beautiful, but also similar to real ones. A simple rose for beginners can also be folded step by step from this paper.
3D origami for beginners
Mastering 3D modeling techniques is not as difficult as some people think. Because in reality it is suitable even for beginners. Some of them may even find it too simple. This can be explained by the fact that the simplest schemes were invented for it too.
The main advantage of this technique is that it helps to create a model that looks very similar to the original. This is extremely important if a person has set a goal to make an origami bouquet of roses and plans to present it as a gift. In this case, it is really better to give preference to this technology.
Realistic rose model
To make the figurine very realistic, it is necessary not only to choose the right design, but also the material for its manufacture. After all, not only the color scheme is important, but also the texture of the paper. You can even use corrugated paper.
But we should not forget that working with such material is specific. Specific skills may be required. Therefore, you should adequately assess your own capabilities.
Decorating the wedding ceremony
The first association that comes to mind when mentioning “rose-wedding” is the showering of petals on the newlyweds at the exit from the registry office. But! This is not the only application.
Glasses are decorated with petals. This is the simplest decor, but it looks festive and allows you to emphasize the color tone of the holiday. How it's done? The technology is simple: the petals are glued with a glue gun, overlapping from bottom to top, up to half or up to a third of the glass. The leg is decorated with a ribbon.
Cushion for rings. The pillow in which the rings will be served can be filled with fragrant petals. The upper part is made transparent from organza, tulle, lace, beads, crystals so that the petals are visible. Rings can be secured with bows.
We calm the bride down. On the eve of an important event, you can take a bath with petals. The oils contained in the buds will help relieve stress and turn the skin into velvet.
Pleasant trifles. Petals can be attached to the clothes of the newlyweds or guests, create a starry sky with the zodiac signs of the bride and groom, and drape tables.
How to combine a winter wedding and New Year's Eve? Add Christmas balls containing rose petals to the festive decor of the room. This way you will add romance, comfort and remind you of the New Year holidays. For decoration you will need transparent Christmas balls. Take out the base, fill the inside with petals, and return the base to its place. If you add bows to the balls in the color of the petals, you will get a decoration for the hall.
Simple pattern: spiral rose
Even children can work with this technique. After all, they just need to draw a spiral on a piece of paper, and then cut it out and twist it. It is noteworthy that it is important here not to try to make the spiral even.
Any irregularities in this case will only play into the hands of the master. Then the petals will turn out more voluminous. It is more convenient to twist the spiral using a toothpick.
Original roses
You will need: red colored paper, a simple pencil, scissors, a round object.
Master Class
- Trace a round object on colored paper.
- Draw a spiral in a circle.
- Cut out the circle.
- Cut the spiral in such a way that you get a “spring”
- Twist the rosette and make the required number of rosettes in the same way.
The original colored paper roses are ready! I recommend watching the video master class!
SIMPLE PAPER ROSES WITH YOUR OWN HANDS
Rose for decoration
The types and ideas of origami roses are very diverse. But roses used for decoration are the most popular. Folding this rose will take very little time.
It is for this reason that this model is more suitable for decoration. After all, decoration will require a lot of preparations, and it is better that they can be done quickly enough.
- We fold the paper into a three-dimensional triangle, which is a standard blank for any origami.
- We raise the lower corners up and then lower them, but only their tops.
- We unfold each vertex to form a small square. We perform this operation again, but from the other side.
- The top of the small house should be lowered down and the multi-layered part should be unfolded to form a square.
- Both triangles that have formed should be raised perpendicularly.
Now all that remains is to twist the rose and you can start preparing the next figure.
Volumetric flower made of corrugated paper
The peculiarity of working with corrugated paper is the need to stretch it. This helps to achieve maximum resemblance to real flowers.
But it is important to understand that the required density of the bud can be achieved only if a large number of petals are used. Therefore, you should prepare them in advance.
Rose made from several layers of paper
A multi-layered flower is quite easy to make. But you won’t have to work with blanks in the form of petals. In this case, it is necessary to use entire layers. You should cut out several flowers from paper, gradually reducing the size of the blanks. And after that all that remains is to twist the petals and assemble the composition.
Dried flower paintings
Oshibana is an eastern direction of floristry, in which paintings are created from dried plants. By properly preparing a wilting bouquet of roses, you can practice this art.
You can dry either whole buds or individual petals and leaves, it depends on what kind of fantasy you are going to turn into reality. Look at the photos of these wonderful rose crafts and choose the one that inspires you the most.
Rose mount
Regardless of what patterns were used for folding roses, it is important to remember one detail. It is not enough to simply fold the rose beautifully; you must also ensure that the flower is securely fastened. Then it can be used to form a bouquet or any other decorative composition.
The mount, that is, the stem, can be made from an ordinary thin stick, toothpick or wire. Of course, these materials should be decorated using colored paper. It is also acceptable to simply paint the stem to make it look like the real thing.
Topiary
This small decorative tree will become a real highlight of the interior. To make it you will need:
- 10-15 dried rose buds;
- thick wire;
- green or brown satin ribbon;
- pot for house plants;
- glue;
- alabaster;
- a small plastic ball of the same color as the buds.
Home crafts: application ideas
When the technique has already been fully mastered, you can think about finding a use for all crafts. Because it is necessary to use them somehow so that the work is not wasted. But sometimes it’s not easy to decide exactly how to use them.
There are plenty of options. But since we are talking about roses made using the origami technique, the easiest way to find a use for them is to assemble a bouquet. It can become an interior decoration and an excellent souvenir for friends or loved ones.