How to make a butterfly knife with your own hands, from what materials?

Is a butterfly knife a bladed weapon?

Balisong is not a bladed weapon. The butterfly knife was often used at the end of the last century by criminals and in cinema, which accompanied the advancement of the version that it was one of the types of bladed weapons.

Nowadays, this knife is more often used in household, tourist and hunting activities. The law allows the use of a butterfly knife if the length of the blade does not exceed 9 centimeters.

In some countries, such as Germany and Australia, the law prohibits the loose wearing of balisongs. In Europe, a butterfly knife is a bladed weapon.

How to do it yourself

The butterfly knife has a simple design, which allows you to make this knife yourself at home. To make it you will need some material, tools and a drawing of a bolusong, which can be found on the Internet. Required Tools

• Bulgarian;
• grinding and cutting wheels;
• vice;
• drill;
• set of nozzles for metal carving;
• center punch;
• hammer;
• screws;
• round and flat file;
• sandpaper.

Bolsong drawings differ only in design. The mechanism for opening the blade is the same for all.

Next, you should draw or find and print a sketch of the knife. For the manufacture of a blade, stainless steel with a thickness of 2 to 4 mm is best suited. You can also use an old circular saw blade or an old knife. When making the handle, it is best to use soft metals up to 3 mm.

Manufacturing process

1. The first step is to transfer the sketch of the drawing onto a metal blank.
2. After marking, secure and process the workpiece, cutting the metal as close as possible to the marking. During the manufacture of the handle, which consists of 2 parts, you will need to make 4 blanks, 2 for each part. Then process the resulting parts using a file and grinder. The width of one plate should not exceed 14 mm.
3. After processing, holes should be drilled in the plates. The part of the plate that will be attached to the handle using a hinge should be drilled with drills of various sizes. Then, using hinges, fasten the handle plates. After fastening, you should drill a hole up to 2.5 mm on one part of the plate, and drill two holes on the other part, 3 and 5.5 mm. Two plates form one part of the knife handle. Carry out the same operation with other plates.
4. After drilling the plates, the handle should be sanded and riveted. There should be holes of approximately 3 mm in places for riveting. After sanding all the parts, you should take 1 part of the handle and assemble it from two halves, screwing them together with screws into 3 mm holes. Perform the same operation with the other part of the knife.
5. Next, you should make a clamp that will securely fix the knife handles in the open position. We drill a 2.5 - 3 mm hole in one prefabricated handle; the latch will be attached to this hole using a rivet. It is best to use a piece of lead for the retainer. You can shape the future retainer using a flat needle file. Lead is a soft metal that can be easily processed. After giving the desired shape, you should drill a hole in the clamp, similar to the hole in the handle, and secure it with a rivet.
6. After working with the handle of the future knife, you need to start drilling and sharpening the blade. The work is done using a file and a grinder. Having received the blade of the desired shape, you need to drill 3 holes: 2 - 3 mm each and 1 - up to 5 mm, then grind the metal. The sharp part of the blade should be on the handle with a lock.
7. The final stage is assembling all the parts. The first step is to make a rivet in the blade of the blade with a central hole of 5 mm; this will be a latch that helps to extend the blade when opening one part of the knife. Then, by pulling the hinges out of the handle, attach 4 parts to the blade, placing 2 parts on one side of the blade, where the hole is 3 mm, and riveting on both sides. Carry out the same operation with the other side. After assembly, check the knife for opening and closing.

There is still no consensus on what a butterfly knife is needed for. Balisongs cannot be called comfortable in everyday life. A review of the butterfly knife showed that it is used as a decorative or collector's item. Criminals use it to exert psychological pressure on the victim during a robbery. Among young people it has established itself as an element of a subculture.

One day I wanted to buy a butterfly knife, also known as a “balisong”. But then I decided that I shouldn’t spend money, but make this instrument myself. So I set about searching for instructions on how to assemble it on the World Wide Web. There were a lot of such manuals, but most of them were descriptions of cardboard crafts and models made from ice cream sticks. In fact, it was not easy to find useful material, and because of this, it was decided that in the end I myself would post on the Internet my version of how to make a butterfly knife with my own hands.

Note to our craftsmen. We invite you to visit the Domarket chain of stores, where you will find a wide range of goods for the whole family and household goods at excellent prices.

Buy or make?

Handle markings.
Very often the handle of a favorite item breaks. Don’t rush to throw away your convenient blade; take some time to repair it.

Find a small piece of moisture-resistant plywood large enough to make the handle. Two fragments measuring 18x3x1 cm will do.

Also stock up on self-tapping screws, liquid nails glue, a file, emery cloth, varnish or paint:

1. An original handle for a knife made from plywood with your own hands will be ideal if you initially make a pattern of the blank from paper or cardboard.
2. Transfer the outline to the plywood dies, tracing the template with a pencil. You should end up with two identical wooden halves.

Marking the handle mounting points.

1. The blanks are cut out and applied to the blade. Don't forget to mark where the screws will fit.
2. To prevent the plywood knife from falling apart in your hand, the inside of the dies is coated with glue, then a “sandwich” is assembled from the halves and the blade.
3. The fitted parts are fastened with self-tapping screws and clamped in a vice for about a day. You can put the semi-finished product under a heavy press.
4. After the glue has completely dried, the handle is polished with a file and emery cloth.

The photo shows the finished pen.

1. For household knives, the instructions advise covering the finished product with waterproof varnish or painting it.

Legal assistant

Among the knives allowed by law to be worn and not considered edged weapons (with a blade length of up to 9 centimeters), there are also quite original and useful specimens. They have an affordable price and interesting appearance. For example, this is the “butterfly” of Filipino origin (the original name is “balisong”), the Malaysian-Indonesian knife “karambit” and the Nepalese “khukri”.

We suggest you familiarize yourself with what to water a tree so that it dies. How to water a tree so that it dries out quickly?

The last two have a strongly curved claw-shaped blade; the handle is often equipped with brass knuckles. The butterfly got its name thanks to the handle that extends in both directions, in which the blade is hidden when folded. When the arms open, they resemble wings.

Butterfly knife design

The butterfly knife is folding. When opened, the blade of the butterfly knife emerges in an arc from the handle in which it is hidden. The handle is a connection of two plates in which there is a place for the blade.

Each half of the handle is connected to the blade of the knife, which allows you to make a 180° rotation in the opposite direction from the blade when opening the knife. When fully opened, the blade is exposed, and the two handles fold together to form a one-piece structure.

Also, when fully opened, you can lock the handle. It cannot be said that the butterfly knife lies comfortably in the hand. This is wrong. The handles of other knives are much more ergonomic than the balisong.

Butterfly knife details

The design of a standard balisong includes the following elements:

• blade;
• latch;
• 2 pins;
• handle divided into 2 parts;
• 2 hinge axles.

In the modern world, such a knife is sometimes called a “steel butterfly.” In general, the design is made of various metals, the blade consists of high-quality metal, and the handle is made of cheaper and lighter metal.

This allows you to maintain a balance of weight between the blade and the handle. The design allows you to bring the knife into combat mode with the inertial movement of one hand.

Comb? No, the balisong is for training. She's a butterfly.

The weapon received the name “butterfly knife”, common in Europe (including Russia) and America, due to its rather unusual design: when closed, the blade is hidden between two parts of the handle, when opened, so-called wings are formed. Such a metaphor does not cause controversy, unlike the versions of the origin of the knife, of which it is customary to distinguish two main ones. According to the first version, which is considered the most likely, this knife was invented in the Philippine Islands by simple fishermen. A fisherman's knife is, first of all, a tool with which you can cut any knot, net or rope. The design of the balisong made it possible to quickly, with one hand, remove the blade and at the same time, for example, hold on to the side with the other hand so as not to fall out of the vessel. At the beginning of the 20th century, blacksmith Perfecto de Leon from the small town of Balisong, Batangas Province, improved the fishermen's tool, turning it into a weapon. Thus, the knife received its name from the place of its production, but it is used mainly in Asia.

According to the second version, balisong appeared in Europe no later than the 17th century. Thus, in the French book “Le Perret”, published in 1710, a sketch of a butterfly knife was depicted, and the German company Bontgen and Sabin was selling balisongs at the end of the 19th century.

Page from the catalog of the company Bontgen and Sabin, 1895.

It is believed that these were mainly individual cases not related to Philippine weapons. At the same time, its entry into Europe after the Age of Great Geographical Discoveries seems quite possible. However, the knife spread massively in the West after World War II. Americans brought balisong home as an outlandish souvenir, which quickly became popular, and already in the 70s, the United States established its own production of knives, after which they began to be bought all over the world.

Despite the menacing appearance, experts note that it is not so easy to use a butterfly knife in battle (for example, due to the lack of a stop, like the Finnish knife, but there are techniques for using a butterfly in both open and closed states). It’s the process of opening and closing a knife that looks terrifying, which is why criminals love this weapon: it’s worth “playing” with the knife to create a special impression about yourself or your intentions.

Nowadays, competitions are held on flipping, that is, the ability to handle a balisong, twist and twirl it in every possible way, but Filipinos still use it as a tool, unless, of course, we are talking about martial arts.

Is it possible to make a balisong yourself using a drawing?

The design of a butterfly knife is quite simple, so to make it you will need a drawing and materials for the knife. The drawing can be found on the Internet, and materials can be purchased at special knife stores or you can sharpen all the elements of the knife yourself. The easiest way would be to take a Chinese “donor” and replace the blade and handle lock on it. This way we will get a high-quality knife, not inferior in quality to branded analogues.

I am interested in martial arts with weapons and historical fencing. I write about weapons and military equipment because it is interesting and familiar to me. I often learn a lot of new things and want to share these facts with people who are interested in military issues.

Master class rating 5 out of 5

based on 2923 votes.

Method 2: In this video I will tell you how to make a folding knife with the “Tiger Tooth” coloring from the game CS:GO! Enjoy watching! My affiliate: My VK: My Steam: ... Our group VK: Trade: ... Template: Thank you!

Method 3: In this video I will tell you how to make a Hunting knife from wood from the game CS:GO! Enjoy watching! My VK: My Steam: Trade: Template: Thank you!

Method 4: In this video I will tell you how to make a Bowie Knife (long hunting knife) from wood with a bloody web color! Enjoy watching! Karacatica TV: ... My affiliate: My VK: My Steam: ... Our group VK: Trade: ... Template : Thank you!

Method 5: Random keys: In this video I will tell you how to make a Butterfly Knife from wood from the game CS:GO! Enjoy watching! My VK: My Steam: Trade: Template: Thank you!

Swiss knife model

You can also make a Swiss knife out of paper. It received this name because it was used as a weapon in the Swiss army. It was red. The finished craft can be used in gameplay or presented as an interesting gift to fans of such weapons.

The design of a knife is carried out using the following tools and materials:

• cardboard, preferably white;
• a simple pencil;
• bolt with nut or rivet;
• glue and needle.

Manufacturing process:

Sample

• download the template, print it and cut it out;
• take white cardboard, apply the cut out elements, trace them with a pencil, and cut them out too;
• now we take a needle and pierce the blade, body and saw at once, take out the needle and insert a bolt or rivet;
• Next, we take glue and drip a little onto the workpiece, but it is worth considering that the blade should not be in the glue;
• then we place one part of the body on the other and fix the workpiece.

The knife is ready, now you can decorate it, if you wish, of course. So we have made the main versions of knives, now we will tell you how to make a karambit knife out of paper.

Drawings of knives from CS GO

Among the most popular drawings and templates of cs go knives, we can recall the following:

Bayonet (Bayonet)

A very common melee weapon that every gamer receives in any location. Such a weapon can be used in conjunction with a firearm, attaching a bayonet to an automatic (or semi-automatic) rifle, or used separately, like a knife. There are many skins, various pictures and templates for the bayonet mount. The design of a cs go knife bayonet allows you to make it from durable paper or cardboard, plywood, tin, or make wooden knives.

Hunter Knife

The hunter's knife has a predatory appearance and was one of the first to appear in the gameplay. If you want to make a hunting knife from cs go, you can copy the drawing either on our website or find it on another resource on the Internet. In gameplay, these knives can be found in a special case for hunters, and the cost of these melee weapons is one of the lowest. A drawing of a hunting knife from cs go is presented below.

Butterfly Knife

Butterfly knives can be called one of the most popular due to their decorative nature and the number of skins that are created for them. A drawing of a butterfly from cs go makes it possible to create an exact copy of the knife that is used in the gameplay.

In the game, this type of bladed weapon appeared during Operation Breakthrough, and after that, drawings of a butterfly knife began to be in great demand among gamers who are fans of the game Counter Strike. If you also like the butterfly knife, you can download the drawing on our website.

Flip Knife

Folding knives in the game are more decorative due to the fact that the developers attached a long blade to these bladed weapons. In gaming, the folding knife, or flipper as gamers call it, has been used for more than five years. Therefore, the drawing of a flip knife from cs go is in demand both among fans of the game CS GO and among those who make souvenir weapons.

You can see a detailed drawing of a folding knife from CS GO in front of you and you can download it to make a template using which you can make an exact copy of a knife from CS GO.

Falchion Knife

This cold weapon appeared in the gameplay during the operation “Operation Bloodhound”. To find a falchion in the game, you will need to find a weapon case with the same name, or you will need to go to the trading platform, where you will be charged 2.6 thousand rubles for such a melee weapon.

Knife with hook blade (Gut Knife)

This knife can be called one of the most predatory and dangerous due to the hook on the blade. Gamers themselves call this cold weapon the Ripper or the Butcher's knife. If you like the cs go hook knife, you can find and copy the drawing of this short-range weapon on our website. After this, you can make your own knife with a hook blade from cs go, a drawing of which is provided.

Shadow Daggers

This type of melee weapon is the only one in the game where you can use two knives. The wide blades, short in length (ten centimeters each), make it possible to simultaneously deliver two piercing blows, which allows you to inflict the greatest damage on the enemy.

Butt knives are held in the hands like brass knuckles, and the wide blade protrudes between the middle and ring fingers. If you liked the butt knives in cs go, you will find the drawing on our website and you can copy it.

Karambit

This short-range weapon has the most predatory appearance due to its curved blade, the tip of which is very sharp. Good sharpening of the blade allows you to strike, and the ability to use a normal and reverse grip makes edged weapons very dangerous in battle.

There are a large number of weapon skins for such a knife, which can make the karambit very attractive. If you like the karambit knife, the drawing of this weapon is at your service.

We wrote about all the knives that are available in the game Counter Strike and gave short descriptions for these types of bladed weapons. If you like knives from cs go, then you can copy the drawings from us and then make templates and stencils for knives. This will allow you to get exact copies of the weapons that you liked in the gameplay.

Previous CS GO WeaponsToy knives from CS GO Next CS GO Weapons Pictures of all knives from CS GO

Butterfly knife tricks for beginners

The balisong knife, better known in our area as a “butterfly”, was created and used for its intended purpose in the Philippines, but in our country it is used to perform various turns and tricks. To learn butterfly knife tricks you need patience, training and basic knowledge.

Opening and closing the knife

The knife in its classic form appeared on the Philippine islands. The Asian version of the appearance of the knife is similar to an ancient legend.

This story dates back to the 8th century, it was then that Filipino sailors seemed to come up with such knives. One part of the handle symbolized the sky, the second part the earth, and the blade the surface of the water. Fishermen passed on their knives to their children and grandchildren.

This version is refuted by scientists who have not found a single ancient knife of a similar design. The very first thing you need to do before starting training is to cover the blade with adhesive tape to prevent injuries and damage.

So, for a normal training process you will need:

• butterfly knife;
• step-by-step instructions (training video);
• adhesive plaster.

Opening and closing is the simplest and most basic element; only after it has been mastered perfectly can you move on to the next trick. To deftly open the knife, you need to turn its safe handle towards you. All fingers, with the exception of the thumb, should be on the dangerous side.

1. With a sharp movement, turn the balisong so that your index finger holds the safe handle on the right, and all the rest remain the same.
2. After this, you should lower the lower part of the knife so that it is in a free position.
3. Raise your hand up and move it forward, thus placing the lower part of the knife on it, and the blade, on the contrary, down. In the next motion, grasp the safety handle from below, keeping your thumb slightly higher.
4. Next, you need to sharply raise your hand and remove your thumb, after which the handles will connect.
5. To close the butterfly knife, turn the blade away from you. Together with him, throw the dangerous handle behind your index finger.
6. Lower the blade down, holding the second handle at your sides. And then, with a sharp movement, return them back.

Trick "Ventilation"

An element from the protozoa section. To perform it correctly and safely, you must follow the instructions:

1. The knife is taken by the safe part.
2. The blade is lowered down, and the fingers are folded into a tube so that the thumb and forefinger lightly hold the blade. The handle should move freely between the unused fingers and the hand.
3. The knife can be rotated using any comfortable method.
4. To return to the starting position, you need to catch the moment when the handle is located above the hand and slow down its movement as much as possible. The balisong should close on its own.

Latch Throw Technique

It's a pretty simple trick that's easy to master. This maneuver is performed as follows:

1. The knife is taken with the blade away from you, the latch is pressed against the index finger and continuously held with the help of the thumb.
2. With a sharp movement of the hand, the hand with the butterfly lowers down, the two halves of the handle should also automatically lower.
3. The latch continues to be held by the index finger and thumb, the remaining fingers are moved to the side.
4. After connecting the two handles, the balisong is taken by the dangerous part, the hand is clenched into a fist.

Simple rotation

Basic Twirl is a more difficult trick compared to the previous ones. The knife is taken with the safe side, held with all fingers except the thumb - it should remain free. The rotation of the butterfly begins with the brush. While moving, the knife should be moved with your fingers. The balisong is thrown over the middle finger, while the ring finger is moved to the safe side.

The entire process is carried out while the butterfly is open. Then the sharp handle is thrown onto the index finger. During such a rotation of the butterfly, it holds the part first with the middle and index fingers, then the middle one is replaced by the thumb.

The main thing in this trick is to make sure that when connecting the two handles, the thumb is removed at a sufficient distance so as not to damage it. If you want, it’s not difficult to learn how to perform all kinds of manipulations with a butterfly knife.

The tricks presented above and the instructions for them will allow you to master a base that anyone can do. And it is also worth remembering about personal safety. At first, it is advisable that the blade be sealed with adhesive tape. A responsible approach to learning will lead to the desired results very quickly.

First example

The first drawing method, which will show us how to draw a karambit knife, will be more realistic. The next example will get more artistic. To draw, we will need a pencil, felt-tip pen or pen, this is not so important, because you can draw it with anything.

Let's start with the blade, it should look like a claw. Also, it should not be too long, since most of the length of this knife is occupied by the handle.

We depict the handle, we already said earlier, since the karambit has an unusual shape, the handle should be longer than the blade. Don't forget to draw a round hole at its end.

All the difficult stages are behind us and now the most enjoyable part remains - we detail our drawing. Let's draw a couple of lines on the blade.

Now let's draw the handle.

CS GO has a very limited selection of skins, but the artistic world is limitless. Therefore, you can choose absolutely any colors and patterns and paint the resulting picture.

Spectacular butterfly opening

The main manipulation is performed as follows:

• Firmly grasp the knife, squeeze the handle in your palm and use your little finger to release the latch.
• Holding the closed balisong in front of you (pointing forward), slide it so that the handle is on the outside, away from your palm.
• Twist your wrist sharply so that the knife opens and the side of the Bite handle hits you between your thumb and index finger.
• Flip the knife over, aiming your wrist down, which will force the knife to close again;
• Lift your thumb and flip the knife over again, with the last upward throw the handle will hit your first two fingers again, and the butterfly itself will remain in the open position.

If you decide to join the ranks of novice flippers and buy a butterfly knife, be prepared in advance for increased attention from friends, acquaintances and relatives. Watching videos of complex stunts being performed, you can’t help but feel admiration for the dexterity of the performers, but quite a strong impression is also made by photographs of serious cuts and wounds to the hands, which are generously posted on thematic forums by beginners who overestimated their strength and neglected safety.

Simple rotation technique

For those interested in how to spin a balisong, this basic technique will seem worthy of interest.

• Take the knife by the Safe handle, holding it with all fingers except the thumb, which should remain free.
• Start rotating the brush, moving the knife with your fingers as you move.
• While the butterfly is open, it is thrown over the middle finger, and at the same time the ring finger moves to the safe side. Then the sharp handle is placed on the index finger.
• The main thing when rotating is to make sure that at the moment of connecting the two handles, the thumb is removed from the area where it could be injured when performing a trick with a sharpened balisong instead of a training one.

The butterfly training knife completely eliminates the risk of cutting yourself during training. You can buy this option in an online store absolutely inexpensively, and besides, you can master the skill of flipping somewhat more comfortably and easily than by covering a sharp blade with an adhesive plaster.

Trick “Latch Throw”

This maneuver is also considered quite simple, but looks very impressive.

• Grip the knife with the blade facing forward, pressing the latch against your index finger and holding it with your thumb.
• Sharply lower the hand with the balisong down so that both halves of the handle also drop.
• Continue to hold the latch with your index finger and thumb, and move the rest to the side.
• When the handles are connected, the butterfly knife is taken by the dangerous part, and the hand is clenched into a fist.

Spinning a butterfly is a technique that requires a certain dexterity, skill and, most of all, training. To paraphrase Goethe, the skill of flipping is 1 percent talent and 99 percent sweat. If you make an effort, any trick will be available.

Kunai Dagger

One of the serious paper products can be called a Kunai knife. The paper art of origami is used to construct it. Before you begin the manufacturing process, you need to find two landscape sheets and several sheets of colored paper.

How to make a ninja knife from paper:

Kunai Dagger

1. We take a landscape sheet as a basis, fold it and get a triangular shape. Fold the resulting triangle in half, and then unfold the workpiece to its original position.
2. We wrap the corners to the center line and fold the craft in half. Next, we have protruding ends, which we bend into the resulting pockets and thus form the blade of our future craft.
3. Pressing the edge in the shape of a pyramid with your fingers, we lift the paper a little to achieve volume. We take a second sheet of paper, roll it into a tube with a small diameter and insert the blade five centimeters deep.
4. Next, use your fingers or a sharp object to level the edge of the tube and repeat folding several more times. A handle with a tip should form. At the end, we fix the craft.

Many people want to make the craft heavier and put a coin or pebble in the middle. This is how a ninja knife is made, there are many more options for making knives. Many are trying to learn how to make karambit from paper, we will also tell you about that, but a little later.

Knife like an Assassin

This model of knife can be made without a template. You will need eight album sheets and tape.

The knife is made in this way:

1. We take four sheets, place them on top of each other and bend them in half twice. On one side we cut a strip one centimeter wide. By cutting off the corners we form a knife blade. After this, we cover the workpiece with tape so that it does not fall apart into several parts.
2. Now take four more sheets of paper. We also fold them into one thick sheet and bend them twice. We cut out the central part of the bent workpiece, and secure the rectangular remains with tape. We prepare a limiter protrusion from paper.
3. We take the sheet and wrap it around the body, leaving a small gap. Secure the edges with tape.

The knife is ready. Your child will probably ask you how to make such a paper knife 232 times, and maybe more, because the toy turns out to be excellent. In addition to it, you can make shuriken from paper so that the warrior is ready for battle. We described earlier how to make shuriken.

When playing with such a knife, the child will be safe and will not be injured during the game, and this is a guarantee of peace of mind for parents. It is better to make any paper crafts together with your children; they will really like this activity.