Wreath
What's a holiday without this decoration?
For the wreath we will need:
- Green foamiran;
- Glue;
- Scissors;
- Lots of shiny decorations;
- Ribbon.
Making:
- Cut out a circle.
- We create a pattern of shiny stones on it.
- We make a bow from the ribbon. And at the same time a loop.
- Author of the idea
You can come up with your own decor. Here I wanted to show the principle of operation.
Flower
The photo shows all stages of work. The craft is beautiful and unusual. Can be used to decorate a room, a door, or even as a Christmas tree decoration. Paper is used in the photo, but I think the craft will only be better with foamiran. There are 3 red small inflatable balls inside the flower.
What paint to paint and what colors to choose
It is recommended to use foamiran that has already been painted, since using white makes the work more complicated. Here you need to remember the following:
- Both dry pastel and watercolor or gouache are suitable for work. Paint should be applied in an even layer.
- Acrylic compounds can be used. They are more expensive, but much stronger.
- It is worth choosing light shades, dark ones can greatly worsen the lighting.
To protect against moisture, painted elements can be coated with acrylic varnish.
Christmas decorations
Even figures simply cut out of bright, dense material can already serve as a beautiful Christmas tree decoration. But you can also make a composition from the figures.
We create a designer toy:
- Using a shaped hole punch, we cut out small flowers (it doesn’t matter if you have a hole punch with a different pattern, any one will do for this craft).
- Heat the iron; A minimum temperature is sufficient. We apply the workpieces to the hot surface. They must acquire volume.
- We pierce the prepared flowers with a French pin. We secure it with a pin to a foam ball.
- We secure the loop by stringing it onto one of the pins with a flower.
Snowflakes instead of flowers will look original! Such toys are excellent gifts; they will pleasantly surprise you with their elegance.
Tips from needlewomen
Most handmade foamiran toys have a fairly flat shape. Thanks to this, some of the figures can be placed on the Christmas tree, and some crafts can be attached to the refrigerator. In the second case, a small magnetic strip or square is glued to the back of the toys.
Important! If the figurine is too heavy, the magnet will not hold it, so you should select simple, lightweight crafts.
For a green Christmas tree, it is better to make your own New Year's toys from shiny foamiran, as they will contrast favorably with the dark green background. If the Christmas tree is white or silver, then matte toys will be more suitable for it.
If you sew or glue together two layers of foamiran with a cotton layer, you can get voluminous crafts
Various toys for the Christmas tree
These bumps will be much more elegant and voluminous if they are made from foamiran
You can also make a variety of balls with appliques - click on the pictures to enlarge:
More templates you may need. I would like to remind you that our Santa Claus does not have a clown’s hat, but a boyar’s hat without a balabon and his beard is much longer.
Christmas trees will also look harmonious from foamiran. In principle, everything that is made from felt can be made from foamiran, even better, because foamiran has two advantages - it holds the shape that is given to it when heated or twisted, and prints can be made on it. This means that the Christmas trees can be fluffier and the toys more natural; remember how in the article about crafts for school, there was a cookie - a heart made of foamiran. It's very easy to make and looks edible.
Pine with branches
This foamiran Christmas tree is almost as easy to make as the previous one, but it is made according to a different principle. The material should be two or three shades of green, or more if it is available for sale. For a craft 20 cm high, 4 A4 sheets are enough. In addition to foamiran, you will need the following materials and tools:
- scissors;
- iron;
- ruler;
- hot glue gun or clear glue;
- a cone made of cardboard or foam;
- decor (beads, bows, sequins, ribbons, etc.).
Tip: pine feet do not have to be made of green material; blue or white will do, but a combination of several colors looks best. If you want to make an original version, you can use absolutely any tones.
Headband
What I liked about this model was the ethnic style, and the fact that even if you don’t have templates, you can still make flowers and a headband with them.
We will need:
- 2 sheets of glitter white foamiran;
- Scissors;
- Wire cutters;
- Wire;
- Yellow beads;
- Four leaf flower template;
- Foil;
- Glue;
- Glue gun;
- Threads;
- Floral tape;
- Iron.
Making:
- We cut out the blanks according to the template.
- Using an iron we give them shape.
- For a bud: 1 square, 5 circles.
- We also heat the petals for the bud on an iron.
- Make a ball out of foil. While we bend and twist the foil, weave in the thread.
- We cover the circle with a square and fix it with glue.
- On top, around the circle we decorate with petals.
- We put 2 flower blanks together. We pull the thread and needle through them several times. There should be “tails” on both sides.
- On the front side, the tails are stamens. Dip them in glue and beads.
- Using the tails on the wrong side, we will attach the flowers to the rim. To avoid pulling the thread and spoiling the pattern, apply a drop of glue from the underside at the base of the thread.
- For the wreath we will need 4 sizes of wire. Let's cut it off.
- Wrap it with tape.
- When we wrap it, we insert flowers.
- It remains to weave the layers together, folding them 4 times. Glue ribbon to the edges to tie the wreath.
You can make a different design. For example, attach flowers to a finished headband or make hairpins with this jasmine.
Decoration in the form of a wreath made of fir cones (detailed master class)
I offer another new product that you can easily build yourself from available materials. Take a look at the photo, I’m sure you have all this in your home, especially now when winter is in full swing.
First decide on the size of the wreath, then draw a circle on cardboard and another one on it, cut out this shape, in the form of a ring.
Then tie the ring with tinsel, glue the pine cones and tie bows.
Do this all using a glue gun or regular glue. Balls and plastic houses will also fit beautifully if you glue them to the product.
Next, let's look at another work; the author also suggests cutting out a steering wheel from thick paper.
Then wrap it with masking tape and plain paper.
So that the wreath becomes voluminous and, as it were, lush.
Next, take album sheets and paint them with paints, use a brush or a regular sponge to work.
Cut the leaf into strips.
Next, use scissors to make a fringe, it’s a little time consuming, but it’s not that difficult to do, even a child can do it.
Fold each strip several times and make frequent cuts.
Fold the flexible wire in half and begin to put the workpiece on it, so that you get a twig.
Insert the wire into the strip.
Make the required number of such branches, for example 5-6 pieces. And use them to decorate a ring.
Glue the pine cones in a circle and tie a bow.
Here's another example, use it:
Christmas tree made of foamiran
I'll show you 2 options. This one is more complex.
- Cut squares from green foamiran.
- We make the fringe by making cuts on the side.
- Heat all parts on the iron.
- Glue the base to the cone.
- We fix the squares to the cone from bottom to top.
- At the top we glue a fringe of ribbon.
- We decorate with beads and ribbons.
- Author of the idea and master class
A very cute craft for the New Year.
Simple spruce
This job is for the little ones.
- Cut out the blank for the cone.
- We secure the edges. Christmas tree made of foamiran
- Using a hole punch or yourself, we cut out small multi-colored figures: stars, balls, hearts, snowflakes.
- The kid can attach all this decor to the craft.
- Author MK
Crown
Princesses need a crown!
How to do it, watch the video:
- Cut out a crown from foamiran. Length – 15 cm. Height of teeth – 8.5; lower level – 3.5 cm.
- Glue it together.
- We decorate with rhinestones and beads.
- From organza (1.5m by 5cm) we make an elegant “skirt”. We make folds and stitch. The last seam should be light, not fastened with knots, so that by pulling, you can pull the skirt to the desired size.
- Let's make a bow.
- We attach the base to the bottom of the crown.
- We assemble the design: attach a skirt to the headband, hairpin or headband, and a crown on top. There is a bow on the crown.
If you remove the organza “skirt”, such a crown will suit a prince too!
Twig
A pine branch with a pine cone will look no less elegant in the interior of an apartment or house.
Such crafts for beginners and children from foamiran are easy to make if you follow the step-by-step instructions.
For work you will need the following materials:
- chocolate and dark green foamiran;
- white oil-based pastel;
- Super glue;
- brown tape;
- iron and scissors;
- wire with a cross section of 1.2 mm;
- acrylic based varnish;
- plastic egg.
"Video instruction"
Use these decorations as an addition to gifts or as a stand-alone foam tree ornament.
You can also use them to form original bouquets that will decorate your home.
Piggy
If you have a universal mold, let's now try to make a cute pig.
- We heat the mold. Place a sheet of foamiran on it and press down. We fill it with pieces of foamiran. On top is glue from a hot gun. We cover it all with another sheet of foamiran and press it down with our fingers.
- Using the same scheme, we form the second (back) part.
- We cut off the excess. From it we make additional parts: a nickel, ears.
- We connect 2 parts.
- Let's paint.
- Author of the idea and MK
If you make only one, the front part, you can glue a magnet to the back. Such magnets can be made not only in the shape of a pig, but also of Santa Claus, etc.
Postcard
card from foamiran for the New Year
You can simply prepare a beautiful card. It is enough to cut out any winter composition. Select glue and connect all parts of the picture.
But you can also do it this way:
View this post on Instagram
Publication from Elena Selivanova (@daynotes.ru) December 3, 2022 at 11:28 PST
Subscribe to my Instagram, there are many useful MKs there
- We cut out a Christmas tree from foamiran according to the template. We have it in four parts. We make each part a little higher than the template. We make cuts along the bottom edge and twist it in our hands. We glue it onto colored or white cardboard; you can also make an applique for the background.
- We make a star out of yellow.
- And we decorate our picture with rhinestones or toys.
It will be very simple and interesting for kids to create this little miracle!
What ways do you know to make crafts using foamiran? Share! Your work is interesting. And if you share this article on social networks, and a lot of people come to visit us, can you imagine what a collection of work we will gather?!
Master class on how to make a Christmas wreath from newspaper tubes
If you want to make another masterpiece, and also from an unusual material. Namely, from tubes, but not plastic, but paper. Imagine, it’s hard to believe, but now it’s possible to do such things. Moreover, you will need old newspapers.
We will need:
- many newspapers
- PVA glue and moment
- stain or brown gouache
- thin wire
- thread
- bottle
- knitting needles
- decorative tape
- beads
- scissors
Stages:
1. Twist tubes from newspapers, use a knitting needle for this, treat the joint with glue. Then place them like shown in the picture and start weaving.
2. To complete the craft, you need to take a jar, like a tall flask, suitable for varnish or juice, and wrap it in a spiral.
3. You need to do it this way, take the first tube and bend it like this:
4. Afterwards, bend the adjacent one and place the next one, and so on until you have assembled the entire product.
5. Gradually raise the jar.
6. This is how the blank turned out, quite long.
7. Twist the resulting workpiece into a circle and connect the ends with wire. And then use stain or paint.
8. Thread the blue ribbon and glue on the beads.
There are still questions left, then take a look at this video, maybe there won’t be any more. Make such beauty from paper vine. Good luck!