Despite the fact that in stores there is a sufficient assortment of a wide variety of hair clips and elastic bands, homemade ones are much more expensive. Even receiving one as a gift is much nicer, especially if it was made by the hands of a loved one. Learning how to make hairpins yourself is not at all difficult. A little theory and practice and you will have the opportunity to give original hair jewelry to your friends and family.
Necessary tools to make DIY hairpins at home
All materials and components needed for the work are sold in any store selling hand-made goods. If you want to learn how to make your own hair clips, you will need these for the tutorial. You need to start your purchases from the basics. It comes in different types:
- invisible;
- banana;
- alligator clip;
- latch;
- rubber;
- spring;
- automatic clamp;
- tick tock.
Almost any material can be used to make hairpins. Half of what you need for work can be found at home. This can be, for example, any fabric, finishing tapes, fur, leather, buttons, zippers, as well as rhinestones, beads from different materials, beads, polymer clay.
In addition, various tools will be needed for the job. First of all, you need tailor's scissors, needles, a hook, an awl, a sharp cutter, tweezers and clamps. You will also definitely need pliers, wire cutters and a glue gun. In the process of work, other tools that are not so difficult to get will also come in handy.
A little about materials
It is recommended to choose materials for making hairpins from high-quality raw materials. They can be made of either plastic or metal bases.
To purchase all the components for amateur work, just browse the Internet a little.
Fortunately, in our time there are no restrictions on appearance, so representatives of the fair sex can not limit themselves to skimpy bobby pins or stilettos, but look exactly the way their soul desires.
How to make a hairpin from ribbons using the kanzashi technique
Everyone has heard about the kanzashi technique, but for some reason it is considered too difficult for beginners. To begin with, you can try making a hairpin made of satin ribbons in this style. Following the detailed instructions, it is not at all difficult to do. To make hairpins you need: 35 cm of satin or grosgrain ribbon (5 cm wide), an elastic band or snap for the base, a small piece of felt of the same color as the ribbon, a half bead and other tools for work.
The tape is cut into pieces of 5 cm each. You should get 7 identical square pieces. Their edges should be treated with a lighter to prevent the fabric from unraveling. Each square is folded diagonally, the ends are cut off and soldered together with a lighter. You should get a convex petal. Do the same with the remaining pieces.
The lower part of the petal is strung on a thread, pulled together well and secured. The petals are straightened. All that remains is to cut out a circle of felt; it should be about 2 cm in diameter. Glue a flower made of ribbons onto it. A half bead is glued in the center of the flower.
Make sure that no glue residue is visible. The last stage is to attach the flower to the base itself. Make several of these and give them your own hairpins made of satin ribbons; you will definitely like such an original set.
Step-by-step master class for beginners
First you need to study how experienced craftsmen make kanzashi. This technique only seems complicated, but once you understand it, you can make unique products yourself. To master the art of kanzashi for beginners, you need to immediately try to create. You can watch master classes: they explain all the nuances and manufacturing techniques, and reveal all the subtleties of the work. The video also explains step by step what needs to be done to avoid mistakes. If you follow the instructions, you will get beautiful ribbon flowers.
Hairpin with kanzashi roses
This technique is most often used to make hair jewelry. Ribbons make beautiful roses that can be used to decorate any hairpin. To do this, you need a base, as well as a 2.5 cm wide ribbon in green, white and pink. Make the decoration like this:
- from pink and white pieces you need to fold flower petals;
- make different leaves from green ribbon;
- roll one petal into a cone, and glue the rest around it one by one, forming a rose;
- you can make the flower pure pink or finish it with white petals;
- you need one large rose and several small buds;
- fix the flower on a base of leaves, glue the buds into cone-shaped blanks;
- form a composition;
- glue a rectangular piece of thick fabric to the bottom, securing it with a hairpin.
Prepare the base and ribbons Fold the petals from pink ribbon
Make the same number of white petals
Make different leaves from green ribbon
Roll one petal into a cone and glue the rest around it, one at a time, forming a rose. Make one large rose and several small buds.
Attach leaves to flowers
Glue leaves onto the base
Glue the buds Form a composition
Prepare the hairpin
Attach the hairpin to the composition
Headband for girls
A simple and beautiful hair decoration can be made using a headband. Any girl will love this gift. You will need a simple headband, a cardboard circle and a satin ribbon of your favorite color. It is best to make kanzashi flowers from 5 cm ribbon for such decoration. Stages of work:
- from pieces of 5 x 5 cm, make round petals and several long ones;
- connect round elements of 5 pieces and make flowers;
- Attach a cardboard circle to the rim a little to the side;
- Glue long petals around the base;
- Attach three flowers to the side, if necessary, place one in the middle;
- Use the remaining flowers to cover the length of the rim;
- decorate the centers of the flowers with beads;
- Sprinkle with hairspray to keep the composition in shape.
Brooch for May 9
On this holiday, it is customary to attach a St. George ribbon to the chest. But it can be decorated with a beautiful flower using the kanzashi technique and glued to a brooch. This way, the memorial sign will be easier to attach to clothing, and such decoration will look original. To make a brooch you need:
- cut squares from black and orange ribbon;
- make four-layer sharp petals, alternating black and orange;
- Fold 7 of these petals in a circle in the shape of a flower and collect them on a thread;
- make the same petals, only from two parts;
- glue them between the main petals of the flower;
- attach everything to a round felt base;
- decorate the middle with a black bead;
- The basis for the brooch can be a star made of red felt or a correctly folded St. George ribbon.
Cut squares from black and orange ribbon
Make four-layer sharp petals, alternating black and orange
Fold in a circle in the shape of a flower and collect on a thread
Decorate the middle with a black bead
Make the same petals, only from two parts
Glue them between the main petals of the flower
Attach everything to a round felt base. The base is a star made of red felt. A correctly folded St. George ribbon
Curtain tieback
Using the kanzashi technique you can make original accessories for interior decoration. Curtains and drapes are especially often decorated this way. To make a simple clamp you will need:
- make the base by cutting out the rim from a regular disk and covering it with fabric;
- Glue double sharp petals in pairs along the contour of the base to form a twig;
- decorate it in one place with a simple flower with round petals and a bead in the middle;
- Make a stick from a skewer to secure the tie, decorating it at the end with the same petals.
Having mastered the kanzashi technique, you can easily decorate your home or make original gifts. Such flowers can be used for hairpins, brooches, and bracelets. Handmade jewelry is always appreciated by everyone.
Cut disc
Make the base
Cover it with cloth
Make double sharp petals
Collect a flower from round petals with a bead in the middle
Glue petals in pairs along the contour of the base, add a flower
Make a stick from a skewer to secure the tie, decorate it with petals at the end
The hooks are ready
Instructions for making a felt butterfly clip
To make a beautiful butterfly-shaped hairpin, you need pieces of felt of different colors, chenille wire, and a base for the hairpin. Choose the felt color as you wish. To begin, cut out two circles with a diameter of 7 cm; these will be the upper wings.
Change the color of the fabric and cut out two circles with a diameter of 4.5 cm for the lower wings. For the body of the butterfly, another fabric is chosen, for example, yellow. Next, the hairpin is assembled:
- A small gathering is done on the wings with a thread and a needle - first on the lower ones, then on the upper ones.
- The wings are glued or sewn to the body of the butterfly, and then the antennae.
- The butterfly is glued to the base.
- The wings are spread, the butterfly is ready.
Jeans flower
Step-by-step technology for denim colors:
- Prepare a small flower from paper and prepare similar templates on its base, increasing them by 0.3-0.5 cm each time.
- Cut blanks from fabric according to patterns.
- Place the pieces on top of each other, starting with the largest one. Mark the center with a button.
A denim hair clip is very easy to make. It is recommended to decorate these hairpins with beads - Using a thick needle, sew through all layers at the same time.
- Design the middle as desired.
- Sprinkle the product with a little water.
Hairpin in the shape of a rose from foamiran
Foamiran or foam rubber is a convenient material for work. You can give it any shape, make beautiful flowers out of it. A foamiran flower will be a chic decoration for any hairpin. Try making a hairpin in the form of a hairpin adorned with a beautiful rose. The materials you need are two pieces of green and peach colored foamiran, pink pastel, beads and a hairpin.
Make a template for the petals and leaves out of cardboard, and then cut out the petals and leaves using the Thomas template. Tint the tips of the petals with pastel to make them look more natural. Set three petals aside; they will become a rosebud. Heat them with an iron, fold them and gather them into folds. Secure them by twisting them together, and pull out the middle a little.
Cut a wire 15 cm long and string a bead of the appropriate size onto it. Leave a drop of glue on the wire so that the beads do not get lost. Insert the wire into the center of the bud and begin to collect the flower. Glue one petal to the bud, applying a little glue to the very edge. Iron the leaves. Using wire, wrap the flower to the hairpin itself and glue the leaves to the hairpin to hide the wire.
If you liked the first experiment, look for other DIY foamiran hairpins that you can also easily make at home.
What you need to prepare
Before you start, you need to prepare (when using the kanzashi technique):
- A wide satin ribbon of any color (four to five centimeters wide and about one and a half meters long);
- Material made of satin in other contrasting colors (width two and a half centimeters, length twenty-five centimeters);
- Solid acrylic cabochon;
- Fasteners that will be used as a hairpin (hairpin or crab);
- Glue;
- Scissors;
- Candle or lighter;
- Pencil;
- Ruler;
- Thread;
- Needle;
- Tweezers.
DIY leather hairpin in the shape of a rose flower
If you have an old leather bag or jacket at home that has not been used for a long time, do not rush to throw it away. This leather can be used to make beautiful hair clips or hair ties. Leather can be replaced with denim.
To work, take a piece of jeans or leather, beads and a hairpin, and prepare a glue gun or scissors as tools. Making a hairpin is very simple:
- Cut a straight strip from which you will later make a flower. The narrower the strip, the smaller the rose will be.
- Cut a circle out of the material.
- The strip twisted with a rope is glued to the cut out circle. Start from the center and continue in a circle. The end of the rose is hidden under the bottom and glued.
- The flower is given a neat appearance, irregularities and loose threads are trimmed.
- A bead is glued in the very center of the bud.
- The base can be different, depending on desire.
Features of the technology
The Japanese kanzashi technique appeared several hundred years ago. Back then, women decorated their hair with hair clips, combs and pins with various colors and other decorative elements. They were made by hand and called kanzashi, from the Japanese phrase “stuck in the hair.” Such jewelry was previously made from metals, tortoiseshell, bone, wood, and silk. They were different in shape, color, style.
In modern Japan, this art has not lost its popularity. Now there are different types of kanzashi. Jewelry is made in the style of hairpins, round combs, brooches, they can have pendants, rhinestones and other decorative elements.
One of its directions is khan-kanzashi, which has spread throughout the world. These are decorations made of silk in the shape of flowers. The work uses the tsumami method, similar to origami. In this technique, kanzashi flowers are rolled from pieces of silk. Each petal is made separately, then a beautiful plant is assembled from them. Depending on the type, it can contain from 5 to 80 petals. The composition is decorated with beads, rhinestones, and metal elements.
Nowadays, flowers made in the kanzashi style are popular among needlewomen all over the world. They decorate hairpins, brooches, headbands, necklaces, bracelets, make paintings, and boxes. Beautiful flowers made using the kanzashi technique will become a real decoration for your interior on holiday. Unique lush bouquets will add originality to wedding accessories, and cute hairpins will appeal to little fashionistas.
Even a child can make simple kanzashi flowers with his own hands. This exciting activity develops perseverance and imagination.
Flat automatic hairpin decorated with beads: how to quickly make
If you want to know the fastest way to make a hairpin with your own hands, then this instruction is for you. To make it, you need a clean base for hairpins, beads, artificial stones, shells, and rhinestones for decoration. In addition, you will definitely need a glue gun and tweezers to make it convenient to work.
A piece of leather or suede is glued to the base; be sure to turn the edges inward and glue it. Next, glue the decor to the hairpin in any order. If the beads are very small, it is more convenient to help with tweezers. Once the glue is dry, you're done.
Making hairpins with your own hands is an exciting hobby that brings pleasure and sometimes additional income from sales of products made with your own hands. Try making at least one yourself to see for yourself.
Tulle bow
This is an easy way to make a beautiful hair decoration that a child can make. For work, you can use tulle or organza.
Materials:
- textile;
- threads;
- scissors;
- rhinestones or beads for decoration;
- clamp for fixation;
- ribbon.
Manufacturing:
We cut off two strips of tulle, the longer the length, the more magnificent the bow will be. Then we divide each strip into small pieces, they should be the same size.
We fold all the pieces of fabric and tie them with thread in the middle. Pull it tight.
Now we begin to fold the ribbon crosswise and sew it together in the same way.
We cover the clip with the tape from which we made a small bow.
Now, using a thread, we wrap a tulle fan onto a clip, and fix a ribbon bow on top. To cover the thread in the center, you can wrap a ribbon around it on top.
We glue a decoration into the center of our craft, in our case it is a pink rhinestone.
Daisies made from ribbons and beads
A flower made from a satin ribbon will turn out very beautiful and cute. However, it is worth noting that this work will require patience and time, but the result will please you.
Materials:
- tape with a width of at least 6 mm;
- tweezers;
- candle;
- scissors;
- rhinestones;
- felt circle;
- glue gun;
- hair bands.
Manufacturing:
For chamomile, you need to cut 12 pieces of ribbon approximately 3 cm wide.
Now we begin to fold each pistol using tweezers, since the work is very delicate. First, fold the square diagonally.
Then we alternately bring the side corners into the central one.
At the end, you need to fold the sides to get a small boat, and solder the place where the corners are brought together with a candle.
Now we take a felt circle, make a small indent from the center and apply glue, after which we begin to collect chamomile petals in a circle.
When all the petals are glued, we place the decoration in the center and fix the felt circle to the elastic band.
