How to make a coin ring with your own hands at home

A ring is one of the oldest jewelry that has been used by people since ancient times. Since ancient times, this accessory was given as a sign of eternal love and marital fidelity. Rings have a special sacred meaning. It is believed that a hand-made accessory carries bright energy, protects the owner from evil and helps him not to deviate from the path of life. Today we’ll talk about how to make a coin ring with your own hands at home.

How to make a coin ring using a spoon

Usually, a hammer is used to forge a product, but it is more difficult to damage the workpiece with a cutlery, even though they will have to work much longer. So, to make a ring from a coin you need to do the following:

Drill or push a hole in the center of the product and drive a wedge into it. This can be any metal product, for example a bolt.
Clamp the free part of the wedge in a vice so that it is convenient to handle the coin.
Now you need to carefully tap the edge of the coin with a spoon, evenly distributing the load. Depending on the material, this stage can take from 1 to 4 hours.
When the edge has curled and the workpiece has acquired the required size, you can begin grinding. The coin needs to be placed on the drill bit and gradually sanded with sandpaper of different grits.
At this stage, you need to select the excess material from the center of the coin. You can also use a drill or hand tool for this.

At the end, it is necessary to treat all surfaces of the resulting product with GOI paste or other polishing materials.

Forging with a spoon is a long and labor-intensive process. But it allows you to save the design of the coin.

How to choose a coin for a ring?

It should be noted that it must meet certain requirements. Main characteristics:

strength;
safety;
size;
color.

Brass, silver, bronze and steel do not pose a risk to human health. That is why preference should be given to these materials. Copper and nickel can cause skin diseases and poisoning of the body.

Pay attention to the size. Small coins, with a denomination of up to 1 ruble, are definitely not suitable.

History of the idea

Once upon a time, using a silver coin and a hammer, designer Nicholas Heckman created a homemade ring for his beloved girlfriend. No one expected it to turn out so well, and the relatives and the young lady herself were truly delighted with the work done. Subsequently, Heckman released a whole series of designer rings, which added to his fame and recognition. It happened that he had to suspend the sale of products because they were in amazing demand. Heckman shared his practical guidance with the public and now everyone can become a home jeweler in a comfortable and convenient environment.

Make a ring yourself: first stage

First, decide what coin you will use to make the ring. Silver would be an excellent material. Then heat it until red hot until it becomes elastic, but do not overheat it. Otherwise, the coin will be deformed, and some of the elements will be smeared. After it turns red and turns slightly white, drop it sharply into cold water. At this moment you will hear a hissing sound. Don't be alarmed - this is a common occurrence.

Let's move on to the main work to make a coin ring with your own hands. Use a drill to make a hole. Make sure it is level. The larger it is, the thinner the ring, but don't overdo it. Otherwise, the coin may burst.

Once you have made the hole, you will need a plastic hammer and a crossbar, thanks to which you can select the required size and create the shape. This tool resembles a metal stick that expands from the base to the end. Place the coin on the bolt and, with even blows of the hammer, lower the ring down, stretching it. This is a very painstaking process. Try to tap the product lightly, otherwise it may become deformed. Carefully adjust the ring to the size you require. There is a special marking on the crossbar. When you reach a certain level, remove the ring.

Grinding process

Grinding a coin ring is the most enjoyable process in making such a product. When the desired shape appeared and the coin turned into a real work of art, all that remained was to bring the matter to fruition and give the ring a marketable appearance. Sandpaper not only adds shine, but also smoothes the surface of the ring, after which it becomes smooth and pleasant to the touch.

There is one more secret how you can add extra smoothness to a coin ring. To do this, use a regular spoon, which is needed for light tapping on the surface of the ring. Here, again, it is important to be careful and careful, because any intervention with more force than necessary can ruin everything that can be done up to that moment.

How to make a ring from a silver coin. Method No. 2

This method is for those who have specialized tools, such as a press and a punch (which applies pressure to the material during stamping).

So, proceed as follows:

Place the coin in the punch.
Punch a hole using a press. The hole can be drilled with a suitable drill.

Important! You can measure the wall thickness around the hole using a caliper.

Remove any burrs from inside the hole using needle files and sandpaper.
Place the workpiece in a solution of denatured alcohol and boric acid to protect the metal from flames before firing.
Hook the coin by the center using a metal wire and bring the blank to the burner to burn off the alcohol. As a result, the coin will be covered with a protective white film.
Heat the workpiece with a torch until it turns a dull orange color.
Immerse the coin in water. Repeat the heating and cooling process several times.
Decide which side of the workpiece will be on the outside of the ring.
Place the coin face down in the frame.
Place a large bearing ball in the center of the workpiece.
Place the frame with the coin in a vice and squeeze slowly.
Remove the frame from the vice. The coin must have a conical shape.
Place the workpiece on a conical mold. Using a wooden hammer, lower the ring as low as possible while rotating the mandrel.
Remove the ring. Now it needs to be aligned and the size checked on the ring mandrel.
Lightly align the ring in a vise.
Take the mandrel with the smallest cup and place the product with the wide side down.
Squeeze the vise very slowly.
Check the ring after alignment.
To level the surface, place the ring in the mandrel and squeeze it in a vice.
Check the ring from all sides. Place it on the sizing guide to make sure the diameter of the product is accurate.
Finish the edges with a file.
For polishing, use aluminum oxide powder mixed with water. Apply the mixture to the rough side of a piece of leather and polish the product.
The ring you created with your own hands is ready and shiny.

There is another interesting way to make a ring with your own hands. We suggest making jewelry from a common plastic bottle. This method of making a ring will appeal to the female half of our readers, since no special tools are needed to create a unique accessory.

What do you need to know?

To make a ring from a coin, you only need to use a plastic hammer. If you take a metal one, you risk damaging the smallest elements of the coin. Accordingly, the surface of the product will be uneven, even after treatment with sandpaper.

Making a ring from a coin is not easy, but if you follow the rules, you will certainly succeed. There is one more very important nuance. To prevent your product from acquiring a cone shape, remove it from the crossbar from time to time and turn it over. This is the hardest part, because choosing the right size is not as easy as it seems at first glance. Follow the instructions carefully, and you will certainly be able to make a ring out of a coin.

When you remove the product from the bolt, use tongs or pliers with a clamp to avoid scratching it.

Ring with external coin design

To turn the design of the ring outward, you need to take a slightly different approach. This method is more complicated, but the result is many times more interesting.

The manufacturing scheme differs radically from the first option. You need to immediately drill a hole in the coin of such a size that the rim matches the thickness of the ring. After this, it will need to be expanded using a metal cone. It is firmly installed, a coin is put on top, on which we place a plastic tube and hit it with light movements from above. The coin gradually decreases, expanding at the same time. When performing these actions, you need to feel the metal and monitor the product to prevent the ring from breaking. After the coin has dropped a little, it must be removed and heated. This can be done in a fireplace or using a gas cutter.

After the penny heats up, you need to continue the same actions as before, only with a hot product. We do everything gradually, each time removing and heating the future ring. When the large circle, which is located closer to the bottom of the cone, becomes the required diameter, the product is turned over and also put on the cone while hot. Work continues until both circles are the same diameter. Here's how to use a coin to make a ring with a design on the outside. After this, you need to polish the ring, as described in the first method.

When sanding, it is not necessary to completely remove all carbon deposits. The combination of shine and carbon deposits makes the metal look very impressive, and the coin pattern gives the ring a special charm. Such a stylish accessory will definitely be noticed by everyone around you.

Create shine and bring beauty

To make the surface of the ring smooth, you can make several dozen strokes with an ordinary spoon. They must be light, otherwise you risk deforming the ring. To make it smoother, use sandpaper or a special power tool to remove external imperfections. The surface of the ring, the photo of which you see below, will take on a polished appearance.

It should be noted that there are several types of polishing tools: coarse grain and rough. Choose what suits you best.

The manufacturing method used in this article is quite complex, but the result is a perfect product that will delight you for many years. After polishing, you can decorate the ring with beautiful engraving or an original design. However, the result of your work depends on your efforts.

Sanding the outer part

Now we already know exactly how to make a ring from a coin, and all that remains is to polish it to a mirror shine. To do this, you need to take a bolt and nut of a size very close to the diameter of the inner circumference of the decoration. We put it on the bolt, placing a piece of fabric, and then fix it with a nut. It is very important that the ring does not come into contact with the metal and does not get scratched. We clamp the bolt into the drill, turn it on and sand the ring, first on the finest sandpaper, and then on felt or thick fabric. This way the appearance of the ring will become dazzlingly perfect.

The inside can be easily sanded by inserting a straight piece of stick into the drill instead of a drill. You can hold the ring with pliers, having previously wrapped them with thick fabric in several layers. That's all - the ring is made from a coin with your own hands, now it needs to be polished by hand, and the fashion accessory is ready.

Step-by-step instruction

Punch or drill a hole in the center of the coin.

It is best to drill first and then widen it with a chisel and hammer. The hole does not have to be the same diameter as the finger; with further processing, the ring will stretch further.

The width of the future ring will be equal to the “belt” of metal left around the hole. Typically, this is where the inscriptions and about half of the entire design are located on coins, so that the ring will be decorated in a natural way. Some countries' coins already have a hole in the middle (for example, some Chinese or Indonesian coins), so in these cases it will only be necessary to widen it.

Fit and finish the ring. For this step you will need pliers, a torch, water, a stone surface, a ring blank and a mallet.

Top articles: Make a stereoscopic 3D image from a regular photo online

Place the workpiece on the blank, making sure that it passes at least a few points of size; then remove, place on a stone and heat the workpiece with a burner. As soon as the metal turns red (and this will happen quite quickly), take the coin with pliers and put it on the blank, working it with a mallet so that the edges bend up (or down - depending on which side you want the “face” to be). Tap the mallet not very hard so as not to erase the inscriptions and patterns, and move the coin lower or higher on the blank (to do this, remove it and turn it over with pliers) until you reach the desired size.

Repeat heating and adjusting until the workpiece is almost flat and fits snugly against the steel surface of the blank.

Cool the ring with cold water by immersing it there along with the blank, or wait until it cools down on its own. Sand the sharp edges, remembering that the edges are not completely flat, and especially paying attention to the inside of the ring, which will be adjacent to the skin.

If you want: polish the ring with a special polish for the metal it is made of. Most coins are alloys, but aluminum polish is suitable for most coins.

If not: clean and wash the ring and it's ready.

https://youtube.com/watch?v=cNWLen_PLC4

Experience of professionals

In order to achieve maximum shine on a coin ring, sandpaper alone will not be enough and more experienced craftsmen suggest using an abrasive compound. This can be considered quite reasonable advice, since this composition is used to treat the surface of hard materials, be it metal or rocks.

In any case, only by mastering the initial techniques, you can create your own unique approach to making a ring and choose your own available tools that only you can masterfully handle.

Nowadays, when it’s difficult to surprise people with something, but you really want to, you can make a stylish ring from a coin that will amaze those around you. Especially if you choose an unusual specimen. The first way to make rings out of metal pennies was invented in America, and the man who did it was called Nicholas Hackman. They say that when Lenin married Krupskaya, they exchanged rings made of coins. Now this idea gives enterprising people good income, because such rings are sold for good money, and they are in demand.

There are two manufacturing technologies: one is simple, and the second is a little more complicated, but anyone can master it if they want, they just need more tools. Let's start with the one that is simpler.

How to make a ring from a coin. DIY coin ring

Home comfort July 19, 2014

The idea to create an original silver coin ring belongs to Nicholas Heckman. He independently took up a hammer and created such an accessory for his beloved. The girl was amazed, as were all her relatives.

General admiration inspired Nicholas so much that he began to improve his creation and, as a result, released a whole series of original silver rings, but after that he stopped his business. Today, everyone can do such work for their beloved.

A homemade ring will be a great surprise, because the most valuable thing is what you create with your own hands.

What is needed to make a coin ring?

First of all, you will need a plastic hammer, bolt, drill, or any other tool that can be used to make a hole. This could be, for example, a special device. Use what is convenient for you. To add shine, prepare sandpaper. It will be useful after completing the main work.

on this topic

How to choose a coin for a ring?

It should be noted that it must meet certain requirements. Main characteristics:

strength;
safety;
size;
color.

Brass, silver, bronze and steel do not pose a risk to human health. That is why preference should be given to these materials. Copper and nickel can cause skin diseases and poisoning of the body.

Pay attention to the size. Small coins, with a denomination of up to 1 ruble, are definitely not suitable.

Make a ring yourself: first stage

First, decide what coin you will use to make the ring. Silver would be an excellent material. Then heat it until red hot until it becomes elastic, but do not overheat it.

Otherwise, the coin will be deformed, and some of the elements will be smeared. After it turns red and turns slightly white, drop it sharply into cold water. At this moment you will hear a hissing sound.

Don't be alarmed - this is a common occurrence.

Place the coin on the bolt and, with even blows of the hammer, lower the ring down, stretching it. This is a very painstaking process. Try to tap the product lightly, otherwise it may become deformed. Carefully adjust the ring to the size you need. There is a special marking on the crossbar.

When you reach a certain level, remove the ring.

What do you need to know?

Making a ring from a coin is not easy, but if you follow the rules, you will certainly succeed. There is one more very important nuance.

To prevent your product from acquiring a cone shape, remove it from the crossbar from time to time and turn it over. This is the hardest part, because choosing the right size is not as easy as it seems at first glance.

Follow the instructions carefully, and you will certainly be able to make a ring out of a coin.

When you remove the product from the bolt, use tongs or pliers with a clamp to avoid scratching it.

Safety regulations

When working with hot metal or silver, be sure to wear special gloves, as you risk getting burned. It should be noted that at the first stage of manufacture, when you work with a drill, you need to wear safety glasses or a mask. Set up your workplace in accordance with all safety regulations. When you make a hole in the coin, cover the table with a sheet of fiberboard.

Grinding

When wondering how to make a ring from a coin, you need to carefully familiarize yourself with the manufacturing process. This article describes all the instructions in detail.

As we have already said, the most difficult stage of the work is creating the form. Sanding is the most enjoyable process. When the ring is ready, you can enjoy the fruit of your labor to the fullest.

All that remains is to add gloss and shake off the excess husk.

Create shine and bring beauty

To make the surface of the ring smooth, you can make several dozen strokes with an ordinary spoon. They must be light, otherwise you risk deforming the ring.

To make it smoother, use sandpaper or a special power tool to remove external imperfections.

The surface of the ring, the photo of which you see below, will take on a polished appearance.

It should be noted that there are several types of polishing tools: coarse grain and rough. Choose what suits you best.

How to organize the workflow?

It is necessary to prepare a workshop where you will have everything at hand. Choose minted soft alloy coins as the material. Always remember this, because the preparatory process is no less important than the work itself.

What other technologies are used to make a ring out of a coin? As you know, there are several methods. The second one can be used as an alternative. It begins with the fact that you need to put the coin on its edge and cover it with some kind of shape. An ordinary spoon is suitable for this.

This manufacturing method differs from the previous one in that the coin does not need to be melted. Here you need to flatten the rib using strong blows with a hammer. The edges should be processed evenly. Periodically look at what happened. Once the edges of the coin are rounded, drill the hole, but not all the way. Stop the drill before it goes through.

Then sand the inside and sand the outside.

One more tip

How to make a perfect ring? Take the abrasive compound and apply it using a small piece of cloth. To achieve a mirror shine, wipe several times.

After this, prepare a grip that will allow you to firmly hold the coin in your hand. It is necessary that its lips have a curved shape. This will provide protection from dents and unwanted scratches.

You can also use rubber felt or paper pads (any soft material will do).

The next step is to enlarge the hole in the center. Carefully ensure that the drill does not slide towards the sides, otherwise all the work done will go down the drain. At this stage you need to be patient. Using careful and painstaking movements, highlight the circumference of the ring. After you have made a ring of the required size, you need to smooth the inside with an emery roller.

Making a ring from a coin is a rather painstaking process. It requires precise movements and following instructions. There are a lot of technologies. You can use various tools for making.

For example, you can use ordinary pliers as a clamp, wrapping them in soft material. This will prevent damage to the surface of the product. There are also many different polishing machines available to make the process easier.

A coin ring is an original and romantic gift. Any girl will appreciate such a broad gesture.

Source: .ru Loading... Home and family DIY New Year's garland of flags

The organization of any holiday is accompanied by the preparation of a tasty and nourishing table, a selection of exciting competitions and entertainment, as well as elegant decoration of the room. The most appropriate and original decoration, located…

Home and family DIY wedding bouquet of peonies

Everyone knows that for a bride, a bouquet is one of the most important elements of a wedding dress. After purchasing a wedding dress, we select gloves, shoes, a headdress, jewelry and, of course, beech...

Home comfort What is barbecue? Brick barbecue: do it yourself (drawings)

To make a barbecue yourself, the master needs to become familiar with the technology of the work. Most often today, brick is used for this purpose, which will allow you to create a strong and durable structure...

Home comfort DIY New Year's candlestick made from a glass

Interesting and beautiful items for interior decoration can be made from unnecessary old things. A familiar situation: there are a few glasses left from a set of glasses, they are now unsuitable for table setting, and it’s good to throw them away...

Home comfort Laying walls from blocks with your own hands. Block wall masonry technology

In the construction of residential buildings and buildings for other purposes, today it is customary to use various materials, including blocks made of gas, foam, expanded clay concrete and gas silicate. Before using...

Home comfort Do-it-yourself folding metal grill (according to drawings)

If you want to purchase a folding barbecue, you might want to consider making one. Despite the fact that similar designs of a wide variety of sizes and shapes can be found on sale today, such models ...

Home comfort Do-it-yourself decorative pond made of tires. How to make a tire pond with your own hands

The owners of a private house or cottage want to make their yard or garden beautiful and cozy. Decorative trees, flowers, paths or other decorations allow you to arrange your landscape design in an original way, but the real highlight is…

Home comfort Do-it-yourself greenhouse frame from a profile

Any greenhouse structure is built on the basis of a frame. The most popular is considered to be a greenhouse frame made from a profile - it is quite easy to install it with your own hands, while the structures are attractive due to their safety and so on...

Home comfort Do-it-yourself plasterboard door arch

Updating your home often leads to radical changes. One of these innovations is most often resorted to - replacing doors with an arch or creating a new entrance. Why is an arch often used in renovations?

Home comfort We make furniture from wood with our own hands

Nowadays, a lot of materials are used to make furniture - glass, metal, plastic. But none of them can compare with natural wood. It lends itself much better to processing, so from it...

Source: https://monateka.com/article/36165/

Safety precautions

Anyone who is going to create a ring from a coin should understand that this is a rather dangerous process that requires a certain approach and compliance with technical rules. The most important thing that a novice master should remember is safety glasses, which should not be removed at the entire stage of the work. A mask and specialized gloves are also important, since when interacting with heated metal, every mistake made can result in serious injury. The work area must also be appropriate to the occasion and protected from unwanted interference by production costs. All materials must be in sight, and the process itself must be carefully planned in advance. It should be remembered that when choosing a coin, preference is given to coins made of a soft alloy; they are more suitable for work and are appropriate for creating such a product.

Drilling a coin ring

To drill a coin, it must be fixed. This can be done in a vice, having previously placed wooden blocks so as not to scratch the surface. If you don’t have a vice, you can take two pieces of board and drill a hole in them a millimeter or two smaller than the size of a penny. Connect two bars and make small holes in the corners for self-tapping screws. After this, we insert a ring between the boards so that the coin can be accessed through the drilled hole. We securely fix it and, holding this massive structure well, we drill out the money. When making a ring out of a coin, it is better to center it before drilling so that the drill does not jump off and scratch the surface.