DIY hanging glass holder. Original DIY hanging shelf for wine and glasses

Functionality and at the same time stylish design in the kitchen is probably the dream of every housewife. Unfortunately, storing kitchen utensils is one of the main problems in the room where food is usually prepared and consumed. This fully applies to diverse ones. Moreover, each type of alcohol requires special containers. At the same time, a glass holder easily solves this problem. And give the interior a special twist.

What is a glass holder?

The device is a structure made of parallel slats, to which the glasses are secured to the wide base of the legs. This is the most convenient way to store wine glasses of all types, configurations and sizes. The holder can be installed both on the countertop and on the kitchen wall, on shelves, and also inside the kitchen cabinet. Very often, a glass holder is attached to a bar counter, which is now a popular decorative element in the kitchen.

Types of glass holders

The most common option is made of metal tubes in which the wine glasses are placed upside down. If you plan to mount it on the wall, you need to buy a wall-mounted glass holder. You can save space in the kitchen if you mount the structure to the bottom wall of a hanging cabinet. A shelf holder suspended on a rail – a steel pipe along the wall – looks stylish. By the way, in addition to one section, we can have one or several sections if it is a linear holder.

If you have a bar leg, decorate it with a functional accessory in the form of a round glass holder.

A glass holder with a suction cup will allow you to secure the dishes where you want to sit in a pleasant company or with your loved one at the moment, without fear of spilling an alcoholic drink.

In addition to metal holders, you can find colorful wooden products and sophisticated glass models on sale.

Useful tips

We spend a lot of time in the kitchen, and we want everything to be at hand.

You can organize your kitchen so that it is as convenient to use as possible.

Find out what, and most importantly how, you can do to organize your kitchen as conveniently as possible.

DIY crafts for the kitchen. Convenient organization of things.

To properly organize things in the kitchen, namely under the sink, you can use a tensile rod. Install the rod and hang all the spray bottles.

You can also screw shelves to the wall of the drawer for small items such as gloves, sponges, brushes.

A bag for different things can be hung on the door.

Place a few extra drawers downstairs, and install hooks on the cabinet doors to hang towels and/or brushes.

DIY kitchen crafts

If you have an old rake, you can use it to make a handy glass holder. You just need to get rid of the wooden part (the handle) and attach the rake to the wall or cabinet.

For convenience, you can drive a nail into the wall, wrap the rake with wire and hang it on the nail (hook).

You can use coasters as shelves to hold various small items.

To attach this stand to a wall or cabinet, use double-sided tape or nails (these are best used if the stand has holes for hanging the stand).

How are they attached?

There are several options for how to secure the holders:

The central type can be conical or round. Mounted on a pole located in the center.
Located on the side - on the railing. It can rotate around an axis or extend sideways.
The hanging wine glass holder is fixed to the ceiling.

Using a bracket, the device is attached to the wall. It can be just for one glass or take up the entire space.

Using a bracket, the device is attached to the wall.

A multi-level system requires a pipe with a radius of five centimeters. The material used is brass or nickel. They are lightweight and yet durable. It is attached to the ceiling using flanges and to the wall using side fasteners. Rails are placed on top to regulate the height. Holders allow you to add and remove elements.

Another way is a chain. It will give the impression that objects are simply hanging in the air. Attaches with a magnet. Such an illusion will attract attention and amaze with its originality. The stand is stable and it is almost impossible to topple it.

It will give the impression that objects are simply hanging in the air.

Original kitchen with your own hands. Knife holder.

Prepare a regular, empty glass (metal or wood) container.

Bamboo sticks (can be replaced with skewers)

Spray paint (or acrylic paint) - optional

If you have a couple of free evenings, why not start making crafts for the kitchen and home? After all, you can create a bunch of useful or simply beautiful little things with your own hands from improvised, natural and even waste materials. In this material, we presented 50 inspiring photos and 12 super ideas with step-by-step master classes on making decorative items, storage accessories, kitchen utensils and more.

Drawers

Source: elpix.ru

For some reason, we are used to the fact that glasses can only be placed in the upper cabinets. Although, this is not very convenient. You can often accidentally hit a nearby mug and break it. A more comfortable and safe option would be to use drawers. Such a non-standard solution will be a non-obvious feature, and at the same time will save you from breaking the dishes, because in this case it will not be possible to accidentally hit and drop the dishes.

Idea 1. Tablet stand made from a cutting board

Watching your favorite TV series on your tablet or peeking at a recipe book while cooking will become easier if you make a special stand for this from... an ordinary cutting board. Making this kitchen craft with your own hands will take no more than two hours, and it will be used every day.

To make a holder for a recipe book or tablet you will need:

You can use an old cutting board or buy a new one (wood is best, but bamboo will work). Its size should not be much larger or smaller than the tablet.
A small wooden plank, or better yet, a piece of molding (this is what will hold the tablet/book).

Another block of wood or plywood from which you can cut a sharp triangle;
Paint or stain in the desired color, for example, to match the countertop, facades or kitchen backsplash;
Paint brush or staining rag;
Jigsaw or saw;
Wood glue or any other strong adhesive.

Instructions:

Using a saw or jigsaw, cut your strip or molding to the desired size (the width of the board), sand the edges with sandpaper, then simply glue it to the bottom of the board.

Cut a support for the stand from a piece of wood in the shape of an acute triangle with a right angle as in the photo below and glue it too.

The angle of inclination of the holder will depend on the inclination of the hypotenuse of the triangular bar

Paint the entire piece following the paint manufacturer's instructions and leave to dry.

If desired, the handle of the resulting stand can be decorated with jute rope or ribbon. This way, when the stand is not needed, you can hang it on a hook.

Also, the craft can be further decorated - for example, by artificially aging it as in this master class, by drawing inscriptions, by burning a design, or by covering it with slate paint. In the following selection of photos you can get ideas for decorating original cutting boards.

From ceramic tiles

Square tiles are another great material for coasters. On this basis, original stands are made in the style of Polaroid photographs. The effect is achieved by gluing a photograph onto a white tile in compliance with the proportions.

Instead of a photo, you can paste your favorite text onto the tile.

Idea 2. Jute coasters

If your kitchen (or, for example, a country or summer kitchen) is decorated in a rustic, Mediterranean, rustic or marine style, then you will probably like this kitchen craft idea. In just a couple of hours you can make coasters for plates for the whole family and guests with your own hands.

To make one substrate with a diameter of 33 cm you will need:

10 meters of jute rope 1 cm thick (sold in construction and hardware stores);
Hot glue gun;
Scissors.

Instructions:

Just start rolling the rope in a circle, applying glue to small sections one by one and fixing them for a while. Once the mat is formed, cut the end of the rope and glue it down.

Idea 3. Organizer for cutlery and kitchen utensils made from cans

Tin cans cost nothing, but they are durable, easy to clean, and their shape is just right for storing all kinds of spatulas, ladle, forks, spoons and other utensils. If you put in a little effort and creativity, you can make a convenient and cute organizer out of them, which, even if it doesn’t fit into the interior of a city kitchen, will definitely fit in at the dacha. You can also use an organizer made with your own hands from cans to store tools, brushes, felt-tip pens and other small items.

Stand for spoons and forks made from cans

To make such a stand for spoons and forks, you will need:

4 or 6 clean and dried cans, without lids or burrs;
Acrylic paint for metal or enamel paint (it will protect the cans from rust);
Several wood screws and a screwdriver;
Thick nail and hammer;
Furniture handle or leather strap with fittings;
A small wooden plank.

Instructions:

Paint the jars inside and out and let them dry for one day.
If necessary, saw the wood to the desired size, sand it, clean it and finally paint it (not necessarily to match the cans).
Take a nail and a hammer and make a hole for the screw in all the cans.

Tip: To make this process easier and not damage the paint layer, place a small block on the table using a clamp, then wrap the block in felt and only then put a jar on the block (see the picture in the lower left corner in the next photo collage)

Place the cans against the board and align them the way they will be mounted later. Mark the location of the holes on the board with a pencil.
Make small holes in the board where the marks were marked, using a hammer and nail.

Screw a screw into the hole of the first can to attach it to the board. Repeat the procedure with all remaining jars.
Finally, install a furniture handle or leather strap on the end of the wooden board using the same self-tapping screws. Ready!

Here are a few other deco ideas and modifications to the design of cutlery stands made from cans.

Choice of equipment

The components for the bar counter should be selected in accordance with its purpose and the volume of the room. If the piece of furniture is considered as a table for a snack, then it would be advisable not to overload it with accessories, but to build a small shelf or cabinet. In the absence of a bar, this option would also be appropriate, since the bar leg, like the solid structure with the table top, does not require central and rotating shelves.

For those who like to cook a lot, it is recommended to install hangers with hooks for storing kitchen utensils, which should always be at hand. You will also need a fruit bowl and a side shelf for small items. Owners who prefer to have fun with friends can get a hanging system for glasses and beer mugs. A similar design with lighting will look very impressive.

To ensure that the bar pipe does not remain empty, you should install rotating shelves that do not interfere with table setting and can easily be moved in the opposite direction. In addition, guests will not have to reach far for the necessary item.

And in conclusion, a short video with an overview of various universal shelves for the bar counter.

Dremel offers to make a universal hanging wine cabinet for storing wine.

What you will need:

- wooden slats;
- 1 wooden block;
- multi-tool (here Dremel 4000);
— grinding attachment (430) 6.4 mm, grain 60;
— cutting disc for wood (SC544);
— universal drill (561);
— universal cutting kit (565);
- glue gun (here Dremel (930));
- screwdriver;
- screws;
- dowels;
- self-tapping screws;
- metal chain.

Step 1

To make the shelf parts, cut a block of wood into several pieces. The back and front walls of the shelf should measure 50 x 2 cm, and the sides should measure 25 x 2 cm. To do this, use a Dremel 4000 Multi-Tool with Wood Cutting Wheel (SC544). Sand the edges of the workpieces using a Dremel 4000 and a Dremel Sanding Attachment (430), 6.4mm, 60 Grit.

Step 2

Take wooden slats and cut them into 12 even pieces (you will need 2 stands for each bottle). Each piece must be no shorter than 22 cm in length. To make these stands, use a Dremel 4000 with Wood Cutting Wheel (SC544).

Step 3

Take the front and back of the wine rack blanks and mark them where the slats will be located. Place pencil marks along the entire length of the finished shelf front - you will need them to cut the cuts for the bottles. To make it more convenient to place bottles on the shelf, cut out semicircles in which the containers should fit. To tackle this task, use the Dremel 4000 and the Universal Cutting Kit (565). Sand the edges of the half-circles using a Dremel 4000 Multi-Tool with a Dremel 6.4mm 60 (430) Grit Sanding Attachment.

Step 4

Attach the slats to the marked points using a Dremel glue gun (930). To complete the work on the shelf, all that remains is to fasten all its parts with screws. Make holes in the shelf components and install metal corner brackets in them. Then insert 25mm screws and tighten them with a screwdriver. To make your wine rack even more convenient, you can install a grid on it for hanging glasses. To do this, you just need to screw the metal grill on the back of the shelf with a screwdriver.

Step 5

Screw self-tapping screws into the corners of the front of the wine rack. Attach a metal chain to them - with its help you can place the shelf anywhere in the kitchen.

Step 6

Now all that remains is to choose a good place to hang the craft on a chain. To secure the wine cabinet, measure the distance between the self-tapping screws. Accordingly, make four holes in the ceiling using the Dremel 4000 and the Multi-Purpose Drill (561), then insert the wall plug and four additional self-tapping screws. Hang a shelf.

What is a glass holder?

Types of glass holders

If you have a bar leg, decorate it with a functional accessory in the form of a round glass holder.

A glass holder with a suction cup will allow you to secure the dishes where you want to sit in a pleasant company or with your loved one at the moment, without fear of spilling an alcoholic drink.

In addition to metal holders, you can find colorful wooden products and sophisticated glass models on sale.

Idea 4. Topiary for kitchen or home decor

Topiary is a small decorative tree that decorates a dining or coffee table, chest of drawers or mantelpiece. And topiary is an excellent addition to a gift, especially if you decorate its crown, say, with candies or flowers. Making such a craft with your own hands does not take much time, does not require the use of expensive materials, and even beginners can do it. Once you master the basic principle, you will be able to create topiary for any occasion, any shape and design. Take a look at our selection of DIY home decor photo ideas, you're sure to find something you'll like!

Kitchen Decor Idea for Halloween

To make this craft you will need:

Base made of polystyrene foam, plastic or floral foam in the shape of a ball or other desired shape;
A trunk (a straight tree branch, a pencil or any other small stick);
Decorative elements for creating a crown: coffee beans, artificial flowers, pine cones, colored beans, etc.;
Decor to disguise the pot filler, for example, moss, pebbles or sisal fiber;
Flower pot;
Filler for a pot that will fix the trunk. For example, cement mortar, the same polystyrene foam or alabaster (the best option) will do;
Thermal glue in a gun;
If necessary, you will need paint to decorate the trunk, base or pot. The trunk can also be decorated with ribbon or twine.

Basic instructions:

To begin with, it is advisable to paint the base in the color of the crown elements so that possible bald spots are not noticeable. You can also paint the trunk and pot and leave them to dry.
Cut a hole at the base of the crown, a couple of centimeters deep, for the trunk, fill it with glue and secure the trunk.
Take the base of the crown and start gluing the decorative parts one by one. The principle of action at this stage is simple: first, large parts are glued, then medium-sized and, finally, small elements fill in the bald spots. You need to glue the decor quickly, before the glue is absorbed into the base.
Dilute the mixture to fix the trunk in the pot according to the manufacturer's instructions and fill the pot with it, not reaching a couple of centimeters to the edge. Next, insert the barrel, hold it for a while and then leave it to dry for a day.
Disguise the filling of the pot with a decorative “cover” (you can fix it with a little glue).

Accessories for roof rails

The railing itself is somewhat reminiscent of a regular curtain rod.

The suspended structure can be made of shiny or matte metal, wood, glass, and plastic.

But the following accessories give it a complete look:

Plugs - they are attached to both sides of the pipe or rail. If the railing runs along the walls and there is a gap near the corner (the railing rails are not connected at an angle of 90 degrees), plugs must be installed, otherwise the structure will look unfinished.
Holder brackets.
Fastenings for glasses are the main functional part of the railing. Fastenings can be of different types. For horizontal rails, most often these are hooks or hangers. In central and rotary designs, with a vertically standing pipe on the bar counter, this is a round counter with holes for glasses.
Additional accessories – shelves, nets, dryers.

The most important advantage of this system is the ability to install holders for dishes without a bar counter.

Idea 5. Serving board-tray

But the idea of an unusual serving board-tray, which, although not a cutting board (intended for displaying food only in dishes), can nevertheless be very functional. For example, it can be used to beautifully serve snacks, drinks (olives, pistachios, nuts, chips, etc.), sauces, honey, sour cream, jam. Thanks to the slate part, while the board is not being used for its intended purpose, it can simply be hung on the wall and used for writing.

To make this DIY kitchen craft you will need:

Wooden board 5 cm thick;
Stain of the desired color (for example, to match the countertop);
Sponge, rag or brush;
Chalkboard paint;
Two furniture handles and wood screws for fastening them;
Jigsaw or saw;
Screwdriver or screwdriver;
Ruler, pencil.

Instructions:

Cut your board to the desired size using a hand/power saw or jigsaw. In this master class, the board is 60 cm long, but you can make it shorter or longer.
Stain your board according to the manufacturer's instructions and let dry.

It's time to paint the inside. To do this, first apply masking tape along the edges of the board to limit the painting area. Next, apply slate paint (in this case, you use paint in a can) and let it dry.

Screw the handles to the edges of the board.

You can replace furniture handles with leather straps, paint the board a bright color, burn a design onto it, or attach two “legs” to the back of it.

DIY glasses for a wedding. Decorate with stained glass paints.

You will need:

- glass glasses

- outline stickers with well-chosen themes (for example, roses and rings) - they can be found in stationery stores

- stained glass paints

- synthetic round brush (in this example, brush No. 2 was used)

- silk ribbon

- hairdryer

- napkin

First you need to wash, dry and degrease the glasses. For the last procedure, you can use a napkin.

Prepare contour stickers - in this case, the roses were applied to the sides, and the rings were applied to the bases of the glasses.

Take a brush and use it to apply stained glass paint to the stickers - in other words, color the picture.

Leave it for a while for the paint to dry, and if you don’t have much time, you can use a hairdryer to make it faster.

To make the glasses look finished, you can tie silk ribbons to their legs.

Idea 6. Stand for mugs and glasses

If you're the type of person who collects wine corks (either for fun or in the hopes of one day making something useful out of them), then you'll love this craft idea.

To make one mug stand you will need:

8 corks (accordingly, to make a set of 4 stands you will need 32 corks);
A roll of cork board, mat or coaster (for cutting out the base of the coasters);
Hot glue;
Leg-split.

Step 1: Lay out your corks in pairs in a square format as shown in the photo below. Using hot glue, apply a bead of glue between the two corks and press them together for 30 seconds. Repeat the procedure with all other pairs.

Step 2. Cut a square from sheet cork (board, rug) corresponding to the size of the future stand. Next, apply thermal glue on it, wait 15-20 seconds. and glue your blanks.

Step 3: Fill the gaps between the corks with glue and let it dry. For better adhesion of the glue to the corks, you can put some kind of press on the workpiece.

Step 4. Wrap the craft with twine and tie a knot.

Handmade coasters for mugs, glasses and glasses can be beautifully packaged and given to a friend

If desired, the stands can be made round, triangular or hexagonal by cutting off the excess with a knife.

Using the described principle, you can make such a hot stand with your own hands. By the way, an old CD will work as a basis in this case.

Idea 7. Wall panel

Another craft idea for the home and kitchen that you can make with your own hands from wine corks is a wall panel for decorating the interior and storing notes, memorable photos and postcards.

Framed cork panel from Ikea

To work, you will only need a beautiful frame (from a picture or a mirror), paint of the desired color, hot glue and a large pile of corks. Corks can be laid out in a herringbone pattern, in a checkerboard pattern, in even rows, and in other ways that you like. If necessary, for example, if there are not enough corks, they can be cut lengthwise or crosswise. To make the corks easier to cut, you need to soak them in hot water for 10 minutes.

Other interesting ideas for making wall panels with your own hands.

Idea 8. Universal knife holder

A knife holder is a very useful kitchen gadget that helps keep your workspace tidy and keeps your knife blades sharp for longer.

Making a knife holder with your own hands is very easy - just pick up a small vase and fill it tightly with bamboo/wooden skewers, colored beans or... colored spaghetti, as in our master class.

To make a knife stand, prepare:

A container or vase is the height of the blade of your largest knife. The shape of the container can be any, but without any bends;
Spaghetti, lots and lots of spaghetti;
Several large ziplock bags (or just large bags that can be tightly tied in a knot);
Alcohol (for example, vodka);
Liquid food coloring in the desired color (or several colors if you want to make a multi-color filling);
Baking trays;
Aluminum foil or old oilcloth tablecloth;
Paper towels;
Kitchen scissors.

Instructions:

Make sure your container is clean and dry, then fill it tightly with spaghetti. When the container is full, remove the spaghetti and add a couple more bunches of pasta to the pile as a reserve (in case you make up for broken sticks).
Divide the spaghetti evenly between the bags and pour enough alcohol into the bags to wet all the sticks. Next, add 10-40 drops of food coloring to each bag.

Seal or tie your bags, then place them in additional bags to avoid leaks. Slowly shake and turn the bags to mix the coloring into the alcohol and pasta. Next, place the bag on one side and leave for 30 minutes, then turn the bag over again and leave it for another half hour. Continue soaking the spaghetti in this manner (no more than 3 hours) until it reaches the desired shade.
Cover your baking sheet with aluminum foil, then a layer of paper towels (or oilcloth). To protect your hands from staining, it is advisable to wear gloves. Remove the spaghetti from the bags, after draining all the liquid, place them on a baking sheet in a single layer and leave to dry. From time to time, the spaghetti needs to be sorted to dry evenly.

Once your spaghetti is COMPLETELY dry, start placing it in the container.
Shake the filled container and smooth out the spaghetti. Insert your knives to determine the optimal filling density, adding pasta or removing excess if necessary.
Now, using kitchen scissors or other very sharp scissors, trim the spaghetti to the desired length without removing it from the container (it's best to do this over the sink). It is important that the spaghetti does not exceed the height of the container by more than 2-3 cm, otherwise it will break quickly.

Idea 9. Jars for storing spices and bulk products

Today we will talk about an express technique for making a paper basket, which can be used to store small items (keys, stationery), yarn, as well as for an unusual presentation of fruits, Easter eggs, bread or pastries for a holiday table or as a gift.

Even a child can weave such baskets quickly and easily

You will need:

About 15 sheets of thin A3 paper, cut in half lengthwise (this can be printer paper, a full sheet of newspaper, or even baking paper);
A container of suitable size with straight sides (for example, a jam jar);
Glue in stick;
One skewer;
Spray paint (optional).

Instructions:

Starting at one corner, begin to roll the sheet of paper tightly around the skewer to the diagonally opposite corner to create an even and long tube. Once the tube is ready, add a few dabs of glue to the corner of the paper to hold it in place and remove the skewer. Do the same with all the remaining sheets. In this master class, 30 tubes were required to weave 2 baskets.
If necessary (for example, if you used newspaper sheets) or if desired, paint the tubes with acrylic paint.
Take an even number of tubes and connect them together as shown in the photo in the upper left corner. In this master class, for a basket the size of a jam jar, 6 tubes were required, for a larger basket - 8 tubes.

Start braiding: Take one of the outer tubes (which is under the grate) and lay it over the adjacent tube, then pass it under the next tube, then run the tube again over the next tube, etc. Continue weaving by lifting the already entwined tubes vertically (from now on we will call these tubes stands).
When 2-3 cm remains from the first working tube, increase its length. To do this, apply glue to the new tube and insert it into the remaining “tail”. Continue weaving over and over again, adding paper tubes as needed.
Once you have weaved a base of the desired diameter (the same size as the container), place the container on it and begin weaving around it, pulling the stand tubes close to the walls.
Having weaved the basket to the end, remove the jar and carefully wrap the end of the working tube into the weave.
Tuck the ends of the posts inside the weave and trim if necessary. Next, you can spray paint from a can as in our master class.

Idea 11. Wall holder for towels and kitchen utensils

From an ordinary grater you can make such a convenient and beautiful holder for a towel and storage of kitchen utensils or even live or artificial plants.

From a flat grater you can make your own kitchen decor in a country, Provence or shabby chic style

To make a heated towel rail and a tray for small items you will need:

A grater (preferably an old one, but a regular new grater will do, as long as it is metal);
Patina for metal (for artificial aging of the grater);
A small cutting board or just a wooden board;
Wooden die (for the bottom of the grater);
Glue.

Instructions:

Following the manufacturer's instructions, cover the grater with a metal patina, for example, green as in this master class.

Install a wooden bottom in the inside. It must first be cut to the size of the upper part of the grater. As a rule, at the top of the grater there are protrusions from metal handles; it is on them that the bottom will be attached.
Screw the grater to the board using self-tapping screws, after making holes in it with a nail and hammer.
Place the board on the wall near the sink, hang a towel on the handle, and put your spatulas, ladles or flowers inside.

What are glass hangers made from?

Currently, the choice of materials for making roof rails is very wide. Below are their main types.

This type of holder makes it possible to secure a structure with hanging glasses along the wall.

Stainless steel. This is the optimal material for a wine glass storage system. It is resistant to all detergents and cleaning agents and is not affected by moisture.

Steel is considered the most common and reliable.

Plastic. Plastic roof rails are inexpensive because the material itself is cheap. However, they do not support much weight.

The service life of plastic products is relatively short.

Aluminum and brass. Lighter than stainless steel, but have a shorter service life.

It will fit into any design and will look stylish.

Attention! Aluminum slats cannot be extended to a greater length. They need to be divided into sections, otherwise the railing will be deformed. Therefore, this option is not suitable for large areas.

Tree. Wooden rails serve as a decorative element in interiors in Provence, vintage, and country styles. If they are coated with high-quality varnish, they can last a long time. Wood is most often used in ceiling systems.

It is possible to make the device yourself.

Glass, usually impact resistant. Such holders look especially good if they are made of colored glass and have high-tech lighting installed inside.

Convenient and stylish device for storing glassware.

Idea 12. Flower vase

Glass bottles for wine, milk or other drinks are almost ready-made vases that are just waiting to be painted with acrylic paints and/or trimmed.

It is very important to have a corner in the apartment where you can spend time in a pleasant company of friends with a glass of good wine. A hanging glass holder, wall or tabletop options will help you decorate this place with the latest in modern fashion. This invention, borrowed from bars and restaurants, made it possible to create an atmosphere of comfort and coziness at home, thereby opening the door of a hospitable home wide open for family and friends.

Functional purpose of the glass holder

Every owner dreams of creating the most comfortable atmosphere in his dining room, in which all family members and guests will have a pleasant time. Any holiday or just a romantic conversation with loved ones is accompanied by a glass of champagne or wine. A kitchen is a specific area that is located in a humid environment with elements of the result of cooking floating in the air. Droplets of fat, soot and smoke deposits do not have the best effect on the appearance of glass or crystal barware. If it is not maintained correctly, fingerprints and unnecessary stains will remain on the surface during use.

To avoid this, you need to take care of a device that will help keep the dishes suspended, which will prevent dust and dirt from getting onto the surface. It would be a very wise decision to purchase hanging holders for glasses in the store, contact specialists, or make them yourself.

Glass storage box

Source: russian.alibaba.com

We use glasses for wine and cocktails much less often than ordinary ones. Therefore, they often just stand and gather dust in open and closed cabinets. Boxes for storing glasses are needed just for such cases, plus the dishes will be safe in them. Especially if the box has sections for each wine glass. If there are no sections initially, then you can make them yourself. To do this you will need thick paper or cardboard.

Types of bar counters

In order to choose the right hanging or any other holder for wine glasses, you need to decide what type of bar counter it is and what accessories are most suitable for it.

A partition stand,
zoning the space of a spacious living room, assumes the presence of all accessories at the request of the owner. There may be a drink holder, a pendant for glasses, martin holders and glasses, a bread box, a fruit bowl, a napkin holder and much more.
Separate counter.
It usually serves as an addition to the dining table with an island layout; it is not very large in size, as it is intended for morning coffee, a quick snack and receiving a small number of guests. Recommended accessories are limited to bottle and glass holders.
Continuation of the surface.
This bar counter is a continuation of the kitchen surface and is a tabletop located at an angle to the work area. Its free edge can be attached either to one floor or to the floor and ceiling. It is allowed to have holders for bottles, wine glasses, and hanging glasses.
Stand-table.
This is the most convenient option for a small apartment. Such a stand is located against the wall or is a continuation of the window sill and does not allow you to place anything other than a holder for glasses, since the small surface area will be too overloaded with hanging objects.

How to choose the right package

Let's figure out what will really be necessary and what is better to refuse so as not to clutter up the space.

It is necessary to choose accessories for the bar counter based on its purpose. In what capacity is it most often used: as a home bar for parties and celebrations, as a table for breakfast and snacks, an additional surface for cooking, working at the computer, or simply as an accessory that separates the space?

If the bar counter is, first of all, a place for you to relax with friends, then equip it with a multi-level composition of: a glass holder, a central shelf for bottles, a side shelf for serving and storage. If the kitchen and the counter itself are large, and you want to create the atmosphere of a real bar, then install a wall-mounted system.

Using more than three shelves is only permissible if your bar counter is a bar counter and not a breakfast table.

If you often cook at the bar table or want to use it to store kitchen utensils, then you will need: triple hangers with hooks on which you can hang ladle, a side shelf for serving, a universal central shelf for storing things (preferably with high sides) and optional glass/bottle holder. But, if there are children in the house, then, of course, it is better to abandon this idea.

In other cases, it will be enough to hang rails on the wall with hooks for appliances, baskets for plants. Or you can just add a small cabinet or shelf to store glasses, drinks, dishes and other items that you most often need at breakfast or while working at the computer. It is better to refuse central and hanging shelves if there is no urgent need for them and your kitchen is not complete.

Western furniture in the form of a high table and elegant chairs still does not go out of fashion, increasingly surprising with new configurations and designs. Bar counter accessories are essential devices that provide additional storage space for kitchen utensils, food and drinks. Modern manufacturers offer many options for different designs to suit every taste and budget. When choosing accessories for the bar counter in the kitchen, you should remember their original purpose and purchase only what is really useful in the household.