Suspension
The model's suspension ensures a smooth ride when passing uneven surfaces, constant contact of the wheels with the road to improve handling, and for off-road models it also takes the impact when landing after jumps. The suspension of most models uses oil-filled shock absorbers, mounted vertically, one on each wheel. Simple models can use friction shock absorbers. Some monsters have two shock absorbers installed on each wheel.
Making your own window decorations
How skillfully Grandfather Frost himself paints windows! Unusual patterns can be seen right on the window, and if you look closely, you can understand how to make a New Year's decoration for the window and implement it in the most wonderful ideas. Inspired by beautiful patterns, many decorate windows with homemade Christmas tree decorations, pine cones or twigs. This window decoration for the New Year can be done not only by adults, but also by children. Fresh creative ideas will come to mind during the work process, and they will be able to give a lot of positive emotions.
Homemade concrete mixer
If you have started a small renovation that requires, for example, plastering the walls, a concrete mixer will come in handy. Once again, washing machine parts will come in handy.
As a result, you will receive a compact device with low power, which you won’t mind throwing away after the repair work is completed.
As a container for concrete, you can use the same drum with pre-sealed holes for draining water. It is best to use parts from a front-loading machine; there will be almost nothing to redo. To strengthen the body, use a metal corner, and for convenient movement of the concrete mixer, equip it with wheels. The main difficulty in the design is the manufacture of a “swing” for the correct tilt and subsequent pouring of concrete. How to do it correctly in the video:
Crafts cars made of wood
Wood is an excellent natural material and is suitable for making children's toys. It can also be used for crafts.
To work, you will need a set of tools and the help of adults, but in the end you will get an excellent craft.
As a material, you can use scraps of timber left after repairs, or cut out the necessary elements from plywood.
It is important to process the elements well so that they have a smooth surface. And provide the elements with a safe and durable connection.
The result is not just a craft, but an excellent children's toy made from natural material.
There are a lot of ideas for craft cars. The basic options are easy to implement, do not require the purchase of expensive materials, and a master class on how to make them can be easily found online. The result will be excellent toys for the child and new ideas for joint leisure.
How to make a simple feather removal machine for home use from a washing machine with your own hands
The time of slaughtering a bird is a troublesome stage. This is usually done in the fall, when the ducks and broilers have reached the desired weight, and it is no longer profitable to keep them in the winter. You need to pluck several dozen or even hundreds of carcasses very quickly. You can get rid of hard labor with the help of a feather removal machine, and it’s easy to do everything from the same parts of the washing machine.
The only thing that can cause difficulties is the search for rubber fingers with threads - beaters. You will have to order them, so keep in mind that you need to think about making the machine long before slaughter
The device does not require disassembling the washing machine. It is especially convenient to use machines with vertical loading. You just need to fix the beats in the drum so that they point inward. Before plucking, the chicken carcass must be scalded with boiling water and then simply thrown into a rotating drum. Here's what happens:
Important! To prevent water from getting on the engine of the feather removal machine, you need to protect it with a plastic casing.
And the last point - the feather removal device must be firmly fixed, since the vibration when loading the carcass will be very strong.
Cool ideas for decorating windows with Christmas garlands
It is impossible to imagine the New Year without bright colorful garlands. There are many original ideas for decorating and decorating windows for the New Year with your own hands, which can easily be implemented along with this holiday decoration. No matter how beautifully the Christmas tree is decorated, it is impossible to imagine it without bright shining lights.
Sport Car
Previously, we told you how to make a simple car out of paper, now we will complicate the work and make a racing car. This toy is capable of moving, for which it is enough to place the craft on a slippery and flat surface and blow on it. To make such a model, you only need office paper.
- take a sheet and fold it in half, but not across, but lengthwise;
- we apply the corners located at the top and bottom on the right and left in the middle;
- iron everything well;
- now we form a bend on the top side with inner triangles in the center; (Step 2)
- We bend the already formed triangles to the middle of the workpiece;
- then bend the side parts inward towards the center;
- fold the bottom side of the triangle onto the top of the workpiece and bend the product in half;
- We bend the remaining corners into the resulting pockets.
The car is basically ready, you can paint it if you wish.
How to make a car with a motor
Hello to all those who like to make homemade cars from existing parts from broken cars! Today we will tell you how to make a motorized machine .
This model of a toy car is an air car (it is structurally similar to the “Rubber Motor Car”), that is, it will be driven by a screw. If desired, you can put it in a boat, which will float very quickly.
We make a machine with a motor
To create an air car you will need the following parts:
- Two pairs of wheels with axles;
- An electric motor from an unnecessary car;
- Ceiling foam sheet;
- About 10 pieces of screws;
- The same number of rubber rings;
- Four AA batteries;
- 20-30 cm of wire for soldering to the electric motor and batteries;
- Switch (toggle switch);
- Sharp knife;
- Screwdriver;
- Soldering iron with tin and solder.
Materials and tools for making a machine
If you're ready, let's start crafting!
- Solder a wire to the batteries and connect them in series, that is, solder the “+” of one battery to the “–” of the second and so on.
Connect the batteries to create a series circuit
Secure them together with rubber rings. This way you should have a 6 volt battery.
AA batteries connected by rubber rings
As an option, you can replace the AA batteries with one or two more powerful ones, then you either won’t have to solder, or you’ll need less.
- Connect the toggle switch to the batteries, and then connect the electric motor to this electrical circuit. Turning the toggle switch on and off, check if the motor is working.
Connect an electric motor to the battery
- Then we move on to creating the body of the machine. To do this, cut out the rectangular base of the machine from polystyrene foam and mark the locations of the wheels.
Cut out the body of the machine
- Using a knife, make indentations in the foam to the thickness of the tubes placed on the wheel axles.
Prepare the wheel mounting points
- Cut two thin plates from foam that will hold the wheels in place. Fasten them with screws.
Secure the wheels with screws
- Cut out a mount for the electric motor from foam plastic and attach it to the base of the machine.
Cut out the motor mount
- Attach the electric motor to it using rubber bands and a thin pin or nail, as shown in the picture.
Attach the electric motor
- Cut a screw from a plastic bottle. Bend its blades. Make a hole in the center and insert the screw onto the electric motor, securing it with a locking ring made from a ballpoint pen.
Attach a homemade screw to the motor
- Secure the batteries using rubber rings and turn on the toggle switch.
The air car must go. The aircar is READY!
- For a better understanding of the process of designing an air car, we suggest watching the video master class “How to make a car with a motor”
- What, you haven't read it yet? Well, it's in vain...
Source: https://izobretaika.in.ua/konstruiruem/kak-sdelat-mashinku-na-motorchike/
Homemade toys (photo)
Smart board with keys, phone, locks, wheels, keychains and letters on magnets.
Many people know that children can play with any thing that interests them. It could be beads or a smartphone - anything that can be studied.
One handyman created this wooden truck for his children.
And here is a board in the shape of a ship, on which you can find a calculator, locks, a lanyard and much more.
One parent decided to upgrade their child's playhouse by decorating the walls with switches, doorknobs and string.
Electric garlands
Electric garlands are an invariable attribute of the New Year holiday. They come in the same or different colors. This festive illumination looks very impressive. They not only decorate the Christmas tree, they are placed along the contour of the window. There are outdoor and indoor garlands; they hang around windows both outside and inside the house. Thanks to them, you can create a rain of light, a waterfall using hanging threads, or a curtain where micro bulbs are attached to the main cord.
Master class “A small car for a little girl”
The basis is two children's chairs and a refrigerator box. We cut out the parts according to the height of the child and the size of the furniture.
We connect the parts using clean sheets of A 4, completely covered with PVA glue. We also cover the uncovered parts with paper. For one wheel, we connect 3-4 circles, paint them with black paint and attach them to the car. Leave to dry.
Next is the process of painting and decorating, to the taste of the owner.
Making a wood lathe from a washing machine
What else can you do with the washing machine motor? One popular idea is a wood lathe. Let's look at the step-by-step process.
Illustration | Description of action |
To firmly fix the engine on the workbench, make fasteners from a metal angle. To do this, drill holes for fixing to the motor legs and table. | |
To fasten a wooden part, you will need a flange fixed to the motor shaft, and these are the studs made from ordinary bolts with cut off heads. Screw these pins into the base. You will need 3 studs. | |
The motor is fixed to the table with self-tapping screws and to the metal part with bolts. | |
The opposite end of the wooden part is attached with such a device. It consists of a screw with a loop, two wooden stands perpendicularly fixed to the corners. | |
This wooden part must be movable so that different workpieces can be used. For mobility, it is mounted on a threaded stud with bolts. | |
To control the motor you will need a power supply. You can use one of the computer units. You will need to install switches to adjust the rotation speed. | |
How to connect a motor to a power supply in animation. | |
To guide your tools, make a tool rest. It consists of two wooden parts and a metal corner. All parts are movable due to fastening with one bolt. | |
The lower part of the tool rest is rigidly fixed on the workbench using self-tapping screws and corners. | |
The workpiece is fixed on the machine on both sides: on the left - on studs, on the right - on a bolt with a handle. To fix it in the workpiece, you need to drill the corresponding holes. | |
To work, you will need sharpened tools - cutters. | |
Final sanding of the workpiece is done using a strip of sandpaper. |
Master class “Colored car”
Cut out car parts in advance from paper of different textures. Old wallpaper, foil, wrapping paper, as well as velvet and foam paper are suitable for these purposes. Let there be several identical parts so that the child has a choice.
Pour the glue into a flat plate so that it is convenient to dip the brush into the glue and spread the parts.
Show your child how to glue the pieces and let him finish the job.
Complete the application with drawings of a traffic light, road, etc.
At 2 years old, the baby goes to kindergarten, and the teachers demand crafts. Devote just an hour to this activity and the child will be happy that he was praised.
Exercising with parents strengthens the family, strengthens trusting relationships and is also a lot of fun.
Soft crafts machines
You can also make soft cars with your own hands. They can be used in children's games and as an unusual interior element.
The simplest way to make such a machine allows you to do without a pattern. Thick foam rubber can be used as a filler. A rectangle, the size of which corresponds to the size of the product, and a smaller square are cut out of it. By placing a square on a rectangle, the base of the craft is formed. This base is covered with fabric.
Then wheels are sewn to the product. They can also be made from foam circles covered with fabric. Or use conditional appliqué elements. Sew on the headlights and mark the taillights. The simplest soft craft machine is ready.
It is useful as a toy, can be used as a seat for a child while playing in a children's room, or as a sofa pillow. A simple and original product.
First option - Using a drill + (Video)
The first option has a simpler solution.
Let's say you need to make a miniature grinding wheel that will be installed in a drill or screwdriver. To do this we can take a broken disk. Using a caliper, we draw a circle of the required dimensions on it. Then we cut out the future miniature disk along the drawn circle. In its center we drill a hole into which we insert a bolt with a diameter of 6 mm. We put the washer on the bottom and tighten it with a nut. The bolt will be the axis of rotation of the disk. We insert it into the chuck of a drill or screwdriver and clamp it. With this tool you can cut materials in hard-to-reach places or those that are small in size. Finished parts can be sanded.
It is easy to make a miniature cutter for cutting small parts from plastic or wood. To do this, take an ordinary tin stopper from a glass bottle. In the center of it we make a hole for installing the axle. The same bolt with a diameter of 6 mm can serve as an axis. Align the edges of the cork and cut out the teeth. It is advisable to make minimal markings.
Such a cutter, loaded into a drill or screwdriver, can easily cut small wooden planks, for example, for modeling. Plastics also lend themselves to this simple tool.
Paper buses
Paper construction is a great hobby for a child. There are many free plans available online. For children, there are options that are easy to glue and cut out. People prefer Soviet models of this type of car.
- Print the drawing on thick paper or whatman paper.
- When printing in black and white, you should add color to the details yourself.
- Carefully cut out the elements.
- Then, using a ruler and a pen that does not write, you need to create the curves.
- They will serve for easy gluing.
- It is carried out with any type of glue, be it a stick or PVA, which must be applied carefully and slowly.
- Check that all parts of the future bus are thoroughly dry.
We properly disassemble and decide what can be made from parts of an old washing machine
Disassembling a washing machine is a leisurely task. After working with water, a salt build-up may remain on the parts; it must be carefully removed so as not to damage the parts during removal. What can be made from an old washing machine? A motor will be useful for homemade projects - it will become the basis for many devices. The drum will also come into play. It is usually made of stainless steel. All pipes must be disconnected from the drum. A loading hatch may also be useful. In addition to these parts, do not rush to throw away springs, counterweights and body parts.
For those who are versed in electronics, you may need a circuit board - it can easily be used to find spare parts for repair work if necessary.
Military vehicle
As children, boys want to become soldiers. Delight your child by creating a car together.
There are two variations of a military car:
- According to the finished scheme,
- Fire truck method.
The materials are still the same - boxes of various sizes and cardboard or paper for pasting the frame. Please refer to actual images for realism.
How and what can be made from a motor from a toy or household appliance
Making something useful out of useless children's toys or household appliances is not a problem for a dreamer. And it’s good that many electrical appliances become outdated and break down. It makes no sense to send such things for repair - it’s easier to buy something new. And true “homemade people” are just waiting for this. They immediately have a whole bunch of ideas that require immediate implementation.
- Second life for children's toys Repair of an old helicopter
- New engine for toy car
- Fan made from a bottle and old disks
- Motorized ship
- Glider car
- Crawling robot
- Other ideas
How to make a sharpener or grinding device from a washing machine engine
A sharpener is one of the most popular tools for the home. It can be used to sharpen garden tools, household knives and scissors. If you don’t already have one, buy it at any tool store or make a sharpening machine from a washing machine. The most difficult part is how to attach the sanding wheel to the motor. The easiest way is to buy a ready-made flange. It looks something like this.
Flange for motor
You can machine a flange from a metal pipe of a suitable diameter; most often, a tube with a cross-section of 32 mm is suitable. You need to cut a piece 15 centimeters long from it, this is quite enough to fix the emery. The flange is secured to the motor shaft by welding or a through bolt. The video describes in detail how a homemade washing machine sharpener works:
Crafts cars made of cardboard
For more complex car models, you will need to cut out all the elements from cardboard and then glue them together. Such crafts are more labor-intensive, require a lot of time and skill, but they also look original.
A cardboard machine can be painted with bright colors, covered with colored paper, and decorated with stickers.
When making such a machine, you can use wheels and an inertial mechanism from an unnecessary toy to get an excellent toy for a child.
Instructions for making crafts from cardboard can be found online or you can create your own.
Interesting options for crafts made from thick packaging cardboard will make a child’s dream of owning any car come true.
Making a barbecue from a drum from a washing machine, photo examples
A metal grill is a temporary product. Sooner or later it burns out and requires replacement. You can buy a new one each time or use improvised material, for example, a drum from a washing machine. Making this craft from a washing machine drum takes a couple of minutes. The beauty is that oxygen easily enters the perforated container, which causes active combustion.
Kebab coals burn quickly, and the process of cooking meat is significantly accelerated
The metal of the drum can withstand a couple of seasons. Make a comfortable stand for it so you don’t have to bend over, and you’re done. Standard length skewers will fit comfortably on a small roasting pan. If necessary, you can lightly weld a couple of guides.
Tags
also with paper. How to make a toy can be made from can be made and How to make damask can also be made can be made from You can make a craft how to make a bird How to make Auto content How to make a pattern with your own hands. with your own hands decorate with your own hands on With your own hands you can with your own hands. by hand. with your own hands with your own hands with your own hands. year with your own hands. how with your own hands, made with your own hands, with your own hands, with your own hands. crafts with your own hands, by nature, phonograph with your own hands, skewers with your own hands. Soft crafts machines Crafts machines Soft crafts machines the basis of crafts.
typewriterarticlestepbyneedtodobighomeorigamifoldselfscissorsmotorvoice