Homemade carbines for fishing with your own hands Shcherbakovs video

A carabiner used in fishing is an element designed to facilitate the fishing process.
Some leash rigs and other installations cannot do without this small connecting link. Therefore, the choice of carabiner, the quality and correctness of its fastening will certainly affect the number of fish caught and the safety of all accessories. In this short article we will talk about what this simple “little thing” is, what types of carabiners are presented in our fishing stores, how to choose the right one and apply it in practice, and show several life hacks for making them at home.

What you need to prepare for work

Having your own reliable kukan is the dream of every fisherman. Upon examination, you will notice that the design of the product is quite simple and does not require any professional skills. Let's consider the process of making a kukan based on 5 loops for caught fish. Before starting work, you should prepare the following materials:

Steel cable in plastic braid with a diameter of no more than 3 mm. The length depends on where the cable will be attached and how many loops the design requires. The average length per loop is taken into account - about 60 cm. For example, you are making a kukan for a predator with 5 loops and will attach it to the boat rails. The distance between the handrails is 1 m, another 0.5 will need to be left in reserve, for 5 loops and their crimps it will take 0.7 x 5 = 3.5 m. In total, you will need to purchase at least 5 m of steel cable.
Aluminum cable clamps – 12 pcs.
The tube is plastic or rubber. The length is calculated by the number of loops, taking into account 15-20 cm for each.
Medium carabiners – 5 pcs.
Large carabiners (at the ends of the main cable) – 2 pcs.
Swivels – 5 pcs.

In addition, to make a fishing rod with your own hands, you will need a tool: a chisel, a hammer, a tape measure, and wire cutters.

How to choose a quality carabiner

Rules for choosing a carbine:

The carbine must correspond to the type of gear (spinning or feeder gear, where the choice is based on the size of the carbine).
Correspond to the method of catching fish (for example, if you are fishing with small baits, then you should not use a carabiner; if you are using large-sized baits when fishing with a heavy jig, then use our tips listed below).

What to look for when purchasing:

Thickness of the material.
Quality of material.
Carabiner size.

What types of carbines are there?

In a fishing store you can find:

The advantage of plate carabiners is their low price. Disadvantage - they are not suitable for fishing with small baits, since, for example, the size of the plate of the equipment element is identical to the size of the wobbler blade, which will not allow the bait to reveal its playing abilities in the water. Such carbines are used when equipping spinning rods when jig fishing with large baits.

Wire carbines, or popularly “American” ones, have different shapes and therefore are much more in demand among fishermen. The only drawback is their higher cost. Unlike plastic fasteners, wire fasteners have a reliable design, which allows them to be used even when fishing with the most delicate baits.

As you can see, wire carabiners are a curved wire, which is equipped with a clasp in the form of a ring or protrusion.

Homemade kukan

As noted earlier, the kukan is a wonderful device in terms of functionality, then let's try to make a kukan with our own hands at home. At the same time, quite often the fisherman manages to get a product with his own hands that is much more reliable than those offered in stores.

Master Class

Let's move on to how to make kukan with your own hands. 5 meters of the cable must be cut. As mentioned earlier, you will need 5 pieces of 70 cm, after which there will be 1 long piece of 1.5 meters.

Swivels and plastic tubes are strung on this long cable, and the order is as follows: the swivel goes first, then the tube, after 4 swivels and tubes have been put on, the last swivel closes the chain.

We attach large carabiners to the edges of the cable using clamps. We put small carabiners (2 pieces each) on the free edges of the swivels.

From the remaining parts of the cable it is necessary to make loops, the edges of which are fixed with clamps. Use a hammer to get a tight seal. The loops are attached to carabiners, after which you can use the kukan for its intended purpose.

How to make a wire lobster clasp for a chain

Materials:

How to make a lock for a chain or bracelet with your own hands. forged carabiner clasp.

Wire - medical stainless steel (wire for orthodontic work), diameter - 0.6 mm.
You can use stainless steel wire for the springs of jewelry locks.

Do-it-yourself carbine? Easily

Tools:

Anvil
Hammer
Round nose pliers
Pliers
Wire cutters
Fine-grain emery stone

Manufacturing process:

DIY Picasso pin

Prepare a piece of wire of the required length.
Flatten the workpiece slightly evenly along its entire length.
Remove any burrs and sharpen the ends of the workpiece to prevent scratching.
Bend the carabiner to the desired shape.

How to use carabiners correctly?

To ensure the correct level of insurance, it is necessary to adhere to certain principles of carabiner operation. First, it must be a working product and must be tested every time before use. It is worth calculating the load pattern that will be applied to the carabiner so that they do not accidentally fall on the weak side. There should also be no more than two load points, otherwise the holder may break or rupture. Under no circumstances should heavy loads be applied to an open, unsecured carabiner. And if it does not have a safety clutch, even more so, you must first install it, orient it correctly, and only then apply force.

The most exciting lures for pike

Do not allow anything to impact the product other than the objects attached to it; if it comes into contact with something due to destruction, then under the influence of load this circumstance can become decisive and a crack is guaranteed. In the event of a shock or any other load other than longitudinal, the carabiner may open and the rope may fly out if it is moving in many directions in a very active mode. It can also unwind the clutch if you have positioned the carabiner so that with each upward movement the rope catches and moves the rope slightly.

The functionality of the rifle, which should be checked before each stage of work, depends on its integrity. Therefore, if there are even the slightest cracks or scratches in the main cargo line, the product must be destroyed so that it does not fall on someone after you. It’s worth doing this even if the fasteners have fallen; stresses and microcracks may appear in its internal structure, which will betray you at the most crucial moment. Check the clutch properly. If the connections of the carabiner are dirty, washing is permitted, but the product must be protected from corrosion.

How to make a machine gun from a hunting carbine in the garage

Do you think that it is impossible to make a machine gun from a hunting rifle? If you think so, then you are deeply mistaken. What seems impossible was accomplished by gunsmith enthusiasts from America. With the help of small alterations accessible to anyone, they made the fairy tale come true, turning a hunting weapon into a machine gun.

I warn you in advance that such alterations are prohibited by the legislation of the Russian Federation, and in no case do I call for changes in the design of weapons, purchase or sale of materials that contradict the law on weapons, all material is for informational purposes only!

A little history. Among Russians, many people know about the Saiga hunting carbine. On various forums, you can read reviews from experts and owners. There is everything here, both praise and curses, for some reason more of the latter. Among such reviews are unreliability, frequent breakdowns and inability either for home defense or hunting, in general, the weapon is so-so.

But few people know that it was the Saiga that acquired the status of a cult weapon in the United States, for which they are willing to pay any money. It was the Saiga that supplanted the Winchesters, Mossbergs and other Benellis in special forces; it was this hunting carbine that border guards and SWAT (special police forces) were armed with. As they say, what we have, we don’t value. But let's return from history, to converting a carbine into a machine gun.

It all started with a joke. As we know, the theme of zombies and other apocalypse is popular now, and it is for these survivalists that the hunting machine gun was made. At first, enthusiasts converted the carbine for burst shooting, unlike Russia, in America this is completely legal and does not take much time. As you know, the Saiga is built on the basis of the AK-74, the operating principle is the same, and the details are the same, it’s just a carbine optimized for the hunting cartridge and the legislation of the Russian Federation. Take the diagrams of the carbine and the machine gun, and look carefully at exactly what parts are missing in your Saiga, I won’t teach you how to get them and how to insert them, but take a closer look at the SHP models of the AK-74 (a cold machine gun for firing blank cartridges).

Next, the magazine was redesigned to accommodate an increased number of cartridges. A PKK magazine was taken as a sample. But everything is new, it’s well forgotten old. And thanks to impact-resistant plastic, a magazine was made that looks like PPSh and Thompson magazines. The principle of operation is the same - the spring, unwinding, feeds cartridges. First, magazines for 60 rounds were made, then for 120 rounds.

To avoid overheating of the barrel, a heat-dissipating casing was installed; for accuracy, the flash suppressor was increased, which made it possible to avoid bouncing of the carbine from burst fire. At first, there were problems with cartridges being misaligned and the bolts jamming from burst fire, then came the turn of the magazines. The spring, especially in the cold, weakened and stopped feeding cartridges. But now these shortcomings have been eliminated by adjusting parts and using composite materials.

And from that moment on, the special services drew the attention of the hunting machine gun. No, they were not going to hunt zombies; they had excellent accuracy of fire, enormous firepower and bursts of grapeshot. At short and extremely short distances, the modernized Saiga, like a broom, destroyed all living things, suppressing resistance. At the same time, it worked perfectly at distances of over one hundred meters. There is information that employees of private military companies in Iraq used such a carbine as a sniper weapon. The Picatinny rail allows you to attach any tactical equipment, and the carbine will be ready to perform any task.

And so, from a joke about zombies and the apocalypse, a machine gun from a hunting carbine was born, which is deservedly popular both among civilians and among military specialists. It should be noted that Russia also noted these modernizations, and the carbine is produced in small quantities for anti-terror forces.

Thank you for your attention! Give a thumbs up, subscribe to the channel, share publications on social networks if you are interested in the articles.

DIY fishing carabiner

Fishermen often use carabiners to rig their gear. There are many of their models in stores, everyone will find one that suits them. They differ in size, shape, design, manufacturer. Of course, reliability, the ability to withstand certain loads.

A common drawback for most products is insufficient load capacity and the presence of various hooks in the design. The first often leads to accumulations of prey due to the bending of the guns and their opening. The second is the cause of constant entanglements, attachments, scratches on the hands, etc. In addition, almost all devices do not pass through the guide rings on the rods; they merge with the fishing line when winding it onto the spool.

One way to solve the problem is to create new designs of carbines that do not contain known flaws. There are plenty of attempts in this regard; it’s worth looking at the proposals of fishermen on the Internet. One of them, in our opinion, is the best, further in the article.

The proposed design of carabiners is based on the refusal to secure the detachable ring of the device with several locks and hooks. And replacing them with a ring-shaped locking element that does not have protruding ends. And most importantly, this element is held on the carabiner not only due to frictional forces, but also due to its elastic properties, which are overcome when the carabiner is opened.

Carabiner with straw

To make this version of the carabiner, you will need an elastic thread with a diameter of 0.03 mm and a piece of fluoroplastic tube.

The procedure for making a carbine:

a piece of fluoroplastic tube is cut off - its length is equal to the length of the middle line of the figure eight; the diameter should provide firm pressure (through the smallest ring of the carabiner) on the central part of the device; If the tube is too small in diameter, don’t worry: when you first put it on, it will take on the desired diameter; if it is too large, you need to lengthen the pipe, it will decrease to the required diameter.
the body of the carbine is made of fishing line in the shape of a figure eight with a central part elongated in a line; both free ends are joined in it, approximately in the middle; the rings have different diameters: the smaller one is under the fishing line, the free end of the thread coming out of it is pressed tightly against; more details: to attach the nozzle, its free end is left retracted behind; The ends of the thread are made beveled with a file.

How to use the carabiner:

Place the tube on the carabiner, covering the free end of the larger ring with it (to do this, tighten with your fingers).
put a tube on the fishing line;
put the attachment on the larger ring of the carabiner;
the carabiner is attached to the fishing line through a smaller ring;

The rifle opens simply. Pinch the large ring with your fingers and pull the tube onto the fishing line.

This carbine is more reliable than those offered by fishing stores. This will never lead to any hook. Its reliability even under heavy loads has been proven by practical use in many fishing trips.

The usual dimensions of a carabiner are: length 6... 7 mm, ring diameter 1.5... 2 mm. Application: for lighting equipment with a line up to 0.15 mm.

Carabiner with spring

The design of this carbine differs from the previous one by replacing the fluoroplastic tube with a spring. The device is stronger than the previous one and can withstand significant loads when fishing.

The main thread for the carabiner here is 0.5 mm (more is possible, it depends on the equipment used). You can make a spring yourself at home, for example, from 0.2 mm wire. It is wound in turn on a mandrel with a diameter of approximately 0.95 mm and has a length equal to the length of the free end of the loop. It is then stretched to a slightly longer length than the straight section on the figure eight. They are placed on the carabiner so that the spring also covers the free end of the larger ring.

To open the carabiner, the spring is compressed along the axis of the smallest ring (to which the fishing line is attached). The free end of the larger ring is released and moved to the side. Attach the attachment and release the spring. As it straightens, it will again close the entire straight insert of the figure eight and securely fix both free ends of the fishing line in the carabiner. Reverse the steps when you need to remove or replace an injector.

The usual dimensions of a carabiner are: length 12 mm, ring diameter 1.5... 5 mm.

Tags: chain swivel for large dogs

Comments 32

Any crane operators you know?)))

I went and cooked it. tied.

What kind of dog do you have?

The dog is more opulent! Tearing hardened steel for breakfast! Feeds on neighbors!

Yeah))) There are no neighbors left)))

And instead of a ring, I bought a rigging bracket at Stroyka (Shackle bracket).

How did you make it? The chain must not twist.

Carbine. Recently, a dog owner tore her powerful leather collar and now runs temporarily on a squeegee.

Yes, this is a problem with the collar. The guys advised me to add elastic. From the heavy truck camera. Elastic band for post-chain-collar. They said the dog will learn not to run away and pull the chain. Like he'll rebuff her a couple of times.

Haaah, I've never heard of that. ))))) There is no heavy truck, there is the 13th Zhigulevskaya. Exactly...

I don't know, that's what they told me. Probably the camera should be thicker. And not Chinese)))

Why Chinese? Whatever is Soviet.

Well, now there is a lot of Chinese. She doesn't stretch an ounce. But the Soviet one is holding up with a bang.

Sometimes a joint called a swivel is required to connect two devices or products. It provides independent rotations of one part relative to another. A swivel is often used in conjunction with a carabiner (a hook with a lock). For example. in ship gear, leashes for dogs and other animals kept on a leash. Nowadays they are placed on the belts of bags that are worn on the shoulder.

The hinge consists of two parts (brackets): one with a “fungus” cap, the other with an eye hole. It happens that this connection fails. It is not difficult for a city dweller to replace it: in the nearest workshop or by purchasing it in a store, since its cost is not so high. A villager still needs to get to a workshop or store.

Meanwhile, it is not at all difficult to make a hinge using two ordinary nails, as shown in the figure; their length and diameter would be suitable. By the way, the one without a head can be replaced with the appropriate wire, and in some cases, a nail with a head can be replaced with a suitable bolt and nut.

Source

How to make a bait trap while fishing?

You planned to go fishing for white fish, but (on purpose!), today a predator woke up in the pond. How to get fry (5-7 cm) using the improvised method? Spiders and wrens are too large to be carried.

Therefore, ordinary plastic bottles will help out. Whatever you say, you can find absolutely any kind of container along the shore of any wild body of water. In our case, you will need a five-liter bottle and a couple of liter bottles.

So, we cut off the top part of liter bottles: 10-12 cm from the neck. We make holes on both sides of the five-liter bottle according to the diameter of the finished funnel. Now we will pierce 3-4 holes on the edge of the funnels from the litrushka and the same along the edge of the cut out “windows” of the five-liter jar. They are needed to secure funnels with wire or cord.

We insert the funnels inside the main container and tie them for reliability. The trap is ready for use. For efficiency, you can put a handful of pearl barley or bread inside the bottle, and for reliability, tie a strong cord to the neck of the five-liter bottle. We carefully lower the trap near the shore, where the sun shines well. The live bait won't keep you waiting long!

Kukan for spearfishing

When a fisherman stocks up with devices for preserving fish: a kukan, a cage or others, he can calmly fish without worrying about the future fate of the fish. When spearfishing, there are much fewer opportunities. However, in this case, it is possible to use the kukan. In order to explain why it is needed, it makes sense to imagine what will happen if an underwater hunter does not have such a device at his disposal. Having hit a fish with a harpoon, he will have to return to the shore with the prey, ensure its safety, and only then go hunting for the next fish again.

How to make a carbine with your own hands?

What would you do if, during active fishing with frequent breaks, your bag ran out of fasteners for bait? It's simple! Keep a box of large staples or paper clips in your pocket.

With the latter everything will be even easier. After all, armed with pliers, you need to give the bracket a simplified carbine shape. We cut off any excess wire pieces with wire cutters.

And don’t forget about the cambric, which can be made from a tube for medical IV systems. It is very elastic and will perfectly fix the clasp with the bait on.

Fishing carabiner - description, types, method of knitting and manufacturing

A carabiner used in fishing is an element designed to facilitate the fishing process. Some leash rigs and other installations cannot do without this small connecting link. Therefore, the choice of carabiner, the quality and correctness of its fastening will certainly affect the number of fish caught and the safety of all accessories. In this short article we will talk about what this simple “little thing” is, what types of carabiners are presented in our fishing stores, how to choose the right one and apply it in practice, and show several life hacks for making them at home.

As practice shows, preference should be given to insulation of yellow, orange, red and black colors. We also tried flies of green, white, blue and brown colors, but bites on such bait were rare, very cautious, or even the grayling did not pay any attention to it.

Making beads.

The bead can be made from vinyl plastic and other plastics, but it is best to use light plexiglass, as it is easy to process and is more durable than vinyl plastic. The device for making beads can be mounted on old pliers by welding mandrels to them. If there are no suitable pliers, then the device can be made from sheet iron 5 mm thick, the mandrels can be welded or riveted.

First of all, you need to make a recess in each mandrel (at the ends) equal to half the diameter of the bead, for example 4.5 mm (first drill with a drill, and then straighten with a ball or rounded core). Then you need to make blanks for the beads. For a bead with a diameter of 4.5 mm, a blank is made in the form of a cube measuring 4x4x4 mm. The prepared cube is inserted into the mandrels (from corner to corner) and heated, while the mandrels are gradually removed. You need to try to heat the lower parts of the mandrels so that the workpiece does not burn. For this purpose it is good to use an alcohol lamp, a stove or a large soldering iron. After the ends of the mandrels are completely connected, you need to immediately cool them in cold water. Then remove the excess plastic squeezed out of the mandrels, unclench the mandrels, take out the bead and drill a hole in it. In an hour of work you can make about forty beads without holes. For the convenience of drilling holes in the bead, it must be inserted back into the mandrels, having previously placed paper there so that the mandrels do not converge by 1.5-2 mm. If you have nothing to drill a hole with, you can heat a wire of the appropriate diameter and burn the bead with it.

Making beads for spinning lures from polystyrene at home.

One part of crushed polystyrene is poured with two parts of acetone. Within a day, this mixture forms a viscous, pliable mass, from which you can easily fashion beads of the desired size and string them on a needle. The strung beads should be dried for 12 hours until they become hard.

Homemade carbines.

To equip spinners or various leashes, the fisherman needs carabiners that he can make himself.

For frame carabiners you need a strip of any length and width of approximately 3-4 mm, thickness 0.4-0.7 mm. Use the end of a sewing needle to mark holes on the strip and drill them with a drill with a diameter of 1 mm. After cutting the strip into pieces, bend it into a rectangular frame, insert two pins and twist their ends into a loop. To twist the ends, use pliers, and insert a nail into the loop.

For a tube carabiner, you must have a brass or copper tube with an outer diameter of 4-5 mm. You need to drill two holes in it along the diameter, cut the tube into pieces 2.5 mm long, insert two pins and screw them. The result is reliable and durable carabiners.

For a wire carbine you will need steel wire with a diameter of 0.8-1 mm.

How to make a twister yourself?

Both our fishermen and our predators have become very fond of soft baits. Pike, pike perch, perch, bersh... The only significant drawback of vibrotails is their pliability to the teeth.

After catching the second or third trophy, the silicone becomes cut up and down, losing its working properties. Remember: never throw away twisters that have served their purpose!

So, first we need to make a mold for casting. We dilute the gypsum to the state of thickened sour cream in a convenient container. Then we carefully place a couple of baits there, drowning them to get an imprint.

When the plaster has completely hardened, we carefully take out the submerged baits. Now let’s lubricate the resulting impressions in plaster with regular sunflower oil so that the new twisters don’t stick.

The starting material for pouring is melted old silicone baits or silicone from the household goods department. We cut them into pieces and melt them in an iron jar on the stove. Be sure to stir the silicone while melting. For aesthetics, add dyes to the melted mass. It is enough to choose a couple of contrasting colors: yellow-red, green-yellow, black-red, etc.

However, there is one “but”: if we want to make the twister two-color, we first pour one layer into the plaster mold, wait for it to dry, and only then pour silicone of a different color. The poured mass dries within 20-25 minutes. Carefully remove the finished twister and place it in cold water for a few minutes. The bait is ready.

How to make a winding ring?

This is probably the simplest element that can be done just as easily. It is enough to find an unnecessary one or purchase a spiral for an electric stove within 2 kW on a used market.

The diameter of the wire and its rigidity will provide the winding ring with the necessary properties. We simply bite off “rings” with pliers every 3 turns of the spiral. Now you don’t have to worry about losing such a trifle.

Leash for a dog: types, how to make with photo

A dog leash is a mandatory attribute of a pet’s equipment, which every animal owner should have, regardless of its breed and size of the dog. This is especially true when the rules for walking pets have become significantly more complicated due to the adoption of new restrictive legislation.

It is important to choose this accessory correctly so that it is comfortable for the pet and the owner and corresponds to the purposes for which it is used.

The need to attach a swivel to a carabiner

The purpose of the swivel is to combat line twisting. At the same time, this can be an extra element of equipment, which will add heaviness to the overall structure and make it more noticeable in the water.

Experienced fishermen are inclined to believe that swivels should be attached to a carabiner only when using spinners and such universal baits for predators as Devon. The peculiarity of these types of artificial baits is that they have a strong axial rotation, which makes the line super twisty.

The hand will not tremble: an assistant for marksmanship on the hunt

How could this happen?

After all, the rifle has been sighted and the hunter shoots perfectly.

And this could be due to many factors: excitement, adrenaline or fatigue accumulated during the transition or waiting.

For example, a hunter has been standing at the number for several hours and holding his weapon at the ready, and already at the moment of shooting his hands are so tired that he cannot hold the gun securely.

One of the options for solving this problem is the use of stops and stands of various designs.

Unfortunately, stops are not very common in our country, since for many decades our hunters had only smooth-bore weapons, where the use of stops is irrational.

But after our hunters began to go hunting in other countries (and abroad, especially in Africa, the use of rests is almost the norm), they realized that a regular rest sharply increases shooting efficiency.

Without taking up space in your equipment, a small monopod will serve its owner well.

Today we can safely say that if you are going on a group hunt, say for an elk in a pen, two people in your team will use one type of rest or another. To understand which emphasis is best for you, let's take a closer look at them.

On African hunts, the use of stops is almost mandatory. PHOTO TOPSIMAGES.COM

The first option is a bipod. They are attached to the weapon and significantly help when shooting, especially at long distances. There is not a single film about snipers where this accessory is not given a few minutes.

The correct bipod is mounted on the forend; Grabbing the barrel is acceptable, but only for short-range shooting. However, when hunting, shooting further than 300 meters is not recommended, of course, excluding specialized hunts, for example, in the mountains.

Read the material “Mounting a scope: tire or rings?”

Bipods come in different types and sizes. Contrary to popular belief, you can shoot from a bipod not only while lying down, but also from your knees, and some designs involve shooting while standing.

Bipods are the most common type of weapon rest. PHOTO BY ALEXANDER MISHIN

A distinctive feature of bipods is their attachment to a weapon, which is why compact models have become widespread, which when folded do not interfere with movement.

The attachment of the bipod to the weapon can be rigid (and then the horizontal rolls are removed by different lengths of the right and left legs) or with a “rocking” (and then making adjustments is much easier and faster).

The positive qualities of bipods are their compactness and low cost, but for hunters who shoot from a standing position, bipods are still less convenient.

The next type is pods that are not attached to weapons. For example, a monopod, a single stop, most often telescopic, looking like a ski pole with a flyer on top.

The telescopic stop is most convenient, especially in a monopod, since the shooter has no other way to adjust the height.

photo: Semina Mikhail

Despite its apparent simplicity, a monopod makes life very easy for the shooter: when walking it can be used as a stick, and when shooting it makes aiming much easier.

Monopods come in different designs, two-, three- and four-piece. It is interesting that their prices are much higher than their analogues - walking poles sold for tourists, monopods for photographers, which is apparently due to lower demand and the specifics of the market.

Read the material “Loading rifled cartridges is now allowed”

Bipod is a stand consisting of two sticks, which can be either telescopic or non-telescopic. When walking, they are usually connected together and used in a similar way to a monopod.

With the latter, when shooting, the height is adjusted by the width of the placed sticks. A bipod is noticeably more stable and does not require as much control as a monopod, but it is less convenient to transport.

Using a stop increases the distance to confidently hit a target. PHOTO BY ANTON ZHURAVKOV

A tripod is the most stable design of the above, similar to a photographic tripod.

The price to pay for stability is heavy weight and bulkiness. By the way, any tripod can be turned into a tripod by installing a flyer on it, which is sold separately and is not very expensive.

But sophisticated tripods can have not one, but two points of support: under the forearm and under the butt. This option turns the rest practically into a shooting machine, from which it is very convenient to shoot both standing, sitting and kneeling.

Of course, moderation is needed in every business, otherwise, following the path of progress, we will very quickly come to weapon stations that will be controlled by a joystick, while the hunter will sit somewhere at the base. This is, naturally, a joke, but, as you know, there is a grain of humor in every joke.

I would also like to mention homemade stops. Often watching videos from Africa, I notice that hunters simply use three or two poles tied together.

In our conditions, it is not easy to find three thin, but strong and, most importantly, straight poles, but to buy an aluminum tube with a diameter of 16 or 18 cm in a repair store for a penny and make yourself a bi- or tripod that is in no way inferior to the African one or even superior to it, quite possible.

With proper fastening, this structure can always be disassembled and obtained poles for an awning or tent or a holder for a pot.

The rest can be used for both shooting and observation. PHOTO BY ANTON ZHURAVKOV

But let's return to our emphasis. The machines for shooting and zeroing weapons stand apart. These are usually bulky and heavy units intended for use on the range and most often from a tabletop.

But there are lightweight designs that are mounted on a tripod and are quite suitable for transportation during hunting. Such designs make it possible to minimize errors when shooting.

Old school hunters (at least ours) did not use special equipment. In the literature, a method of shooting often found is when a backpack is simply placed on a fallen tree or stump and they shoot from it.

Read the material “Baikal 145 Los - a new and reliable carbine with strong roots”

A soft pad is needed not only to increase the height of the stop. First of all, it prevents the weapon from bouncing, which shifts the point of impact, sometimes quite significantly.

In connection with the latter, I remember an incident: one old hunter on the chase had a small pillow made of two strips of felt. The essence of the design was not very clear to me, so I asked.

It seemed to me that it increases the area of the shoulder strap and prevents sliding, but it turned out that, in addition to these useful functions, the cushion is placed under the carbine when shooting from a hard surface (wood, stone) and prevents bouncing, maintaining a constant STP point.

Using the rest, you can shoot both standing and sitting. PHOTO SHUTTERSTOCK

Another hunter responded to our conversation and showed another method, in my opinion, extreme. It is good if you need to shoot in a narrow sector. “And it’s especially good for beginners,” the hunter joked, “to have a guarantee that they won’t shoot in the wrong place.”

Its essence is that a rope is tied around a tree with a slight slack. The barrel of the carabiner is inserted into this rope, after which it is turned around once. As a result, the rope is stretched and presses the carbine tightly against the tree trunk, being between it and the rifle.

Read the material “Improving the accuracy of the domestic rifled carbine”

In this position, the carbine is securely fixed, has a large sector both horizontally and vertically, but it cannot be removed quickly, which, in my opinion, is not very good.

On the other hand, there is really no chance of the shooter turning the weapon in the wrong direction. But why take on a group hunt a shooter whose actions you doubt are correct?

In general, the conclusion can be drawn as follows: when shooting, it is best to use a rest. Let it be a tree or something else, but the main thing is that shooting will become more effective than shooting simply with your hands.

In conclusion, I would like to say that, of course, no stops or machines can compensate for a person’s low shooting training.

The emphasis can compensate for minor errors that appear from fatigue, but if the shooter does not know how to take the lead correctly or simply has little experience, then the emphasis in this case is powerless.

So the best decision will be our desire to improve our shooting skills.

Alexander Mishin December 31, 2022 at 03:34 pm

How to make your own carbine. DIY steel wire carabiner

Fishermen often use carabiners to set up rigs. There are many models of them in stores, everyone can find a suitable one. They differ in sizes, shapes, designs, and manufacturers. Naturally, reliability, ability to withstand certain loads.

A common drawback of most products is insufficient load capacity and the presence of various hooks in the design. The first often leads to loss of prey due to the bending of the carbines and their opening. The second is the reason for constant hooking, clinging, scratches on the hands, etc. In addition, almost all devices do not pass through the passage rings on the rods, and get tangled in the fishing line when they are wound with it on the reel.

One of the ways to solve the problem is to create new designs of carabiners that would not contain the noted shortcomings. There are enough attempts at this, it’s worth looking at the offers of fishermen on the Internet. One of them, in our opinion one of the best, is discussed later in the article.

The proposed design of carabiners is based on the refusal to fix the detachable loop of the device with different locks and hooks. And replacing them with a ring-shaped, enclosing element that does not have any ends protruding to the side. And most importantly, this element is held on the carabiner not only due to frictional forces, but also due to its elastic properties, which are overcome when the carabiner is opened.

Carabiner with straw

To make this version of the carbine, you will need an elastic wire 0.03 mm in diameter and a piece of fluoroplastic tube.

The procedure for making a carbine:

The body of the carbine is made from wire in the shape of a figure eight with the middle part elongated in a line; both free ends join exactly in it, approximately in the middle; the rings are made of different diameters: the smaller one is under the fishing line, the free end of the wire extending from it is pressed tightly to the middle part of the “eight”; the larger one is for attaching the nozzle; its free end is left away from the middle part of the “eight”; The ends of the wire are made oblique with a file.
cut off a piece of fluoroplastic tube: its length is equal to the length of the center line of the “figure eight”; the diameter should ensure a tight fit (through the smaller ring of the carabiner) onto the middle part of the device; if the tube is too small in diameter, there is no need to worry: the first time you put it on, it will take on the desired diameter; if it’s too big, you need to stretch the tube, it will shrink to the desired diameter.

Homemade carbine

Description of the process of making a homemade fishing carbine.
Fishing carabiners are used to quickly connect various elements. Most often they are used for quick installation of baits. There are many shapes and sizes of fishing carabiners.

To make a carbine you will need wire and pliers.

It is better to take springy steel wire. Carbines made from it are characterized by increased strength and ease of use.

Round nose pliers are highly desirable. Regular pliers don't work well.

First of all, cut off a small piece of wire. Next, a small ring is formed on it. The fishing line will be tied to it later.

Next, they begin to form the springy part of the carbine. It is highly advisable to make a ring where the wire is bent. This will prevent the baits from getting stuck, because this is where they will be attached.

Next, the clasp is bent. The tip of the wire should extend beyond the top of the carabiner. It is advisable to place the bending point as close as possible to the first ring. This strengthens the design of the carbine.

After this, the clasp is completed. The tip sticking out from above is bent over the top of the carabiner. If the tip of the fastener sticks out too much, it is cut off.

After manufacturing, the carbine needs to be checked. It is opened and closed several times.

That's all, the homemade carbine is ready for fishing! All the best to you.

Source

Reliable carbines for fishing with Aliexpress

If the article “The Weakest Link” has already been read, then the likelihood of purchasing fishing accessories from a Chinese manufacturer automatically disappears. It was the same for me. However, as it turned out later, not everything is so bad. All you have to do is spend some money, order several models from “real” Chinese manufacturers and test them while fishing.

Just for fun, fasteners from 3 different companies were ordered from Aliexpress. He equipped leashes made of fluorine and tungsten with carabiners. Some people didn’t like the bend of the toe. It was inconvenient to change wobblers. Another questioned the quality of the wire. I had to use pliers to press the bracket. There have been no problems with only one model so far.

The name of the office is "Paxipa". Engaged in the sale of baits and equipment for spinning and carp fishing. By the way, they sell pretty good offset hooks.

NHNCH

How to make a feeder for a donkey or feeder?

The most important element of bottom gear is the feeder. But why spend money on primitive designs if you can make them yourself? For a spiral type feeder, you will need an empty ballpoint pen and steel (or copper) wire.

Using pliers, we fix the wire at one end of the rod adjusted in length and “wrap” the spiral around it to the other end. Having bent and crimped the end of the wire on the rod, we bite off the rest. This feeder is successful when used as a sliding rig.

If you want to make both a feeder and a sinker at the same time, then the finished spiral feeder can be lowered with one edge into a spoon with molten lead. Or fix a thick lead plate on the rod in advance.