DIY chaise longue. Drawings, projects with photo instructions

The summer season is approaching and it's time to think about creating a chaise lounge with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.

Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.

DIY chaise longue

• 1 General recommendations
• 2 Monolithic chaise lounge made of wood
• 3 Assembling a chaise lounge on wheels
• 4 Simple lounger
• 5 Video of DIY garden lounger
• 6 Fabric chaise longue
• 7 DIY fabric chaise lounge. Model 2 7.1 Manufacturing process:
• 7.2 Model installation

Sun loungers are widely used on beaches and by pools. On personal plots, dachas.

Sun loungers are made from various materials:

• wood;
• plastic;
• aluminum;
• rattan;
• PVC pipes;
• durable fabric.

Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.

Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.

Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.

Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.

In this article we will tell you how to create wooden sun loungers with your own hands.

General recommendations

To ensure the longevity of the effort expended, the materials used must be processed.

Antiseptics and special impregnations will help protect wood from moisture, harmful insects, rot, and mold. It is better to carry out processing before assembling the structure.

After installing the sunbed, the wooden parts should be coated with primer, drying oil, varnish or paint. This will extend the life of your masterpiece.

Fabrics should also be protected from rain and sun. Water-repellent impregnations will help preserve their brightness and service. Their effect lasts 2-4 weeks.

And, of course, remember the famous Russian proverb when working. Measure seven times, cut once.

Monolithic chaise lounge made of wood

Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. The following instructions will help you make a chaise lounge on wheels with your own hands.

You will need tools:

• electric jigsaw or hacksaw;
• drill;
• screwdriver;
• self-tapping screws;
• fine grain sandpaper;
• spirit level;
• roulette.

When choosing a tree, pay attention to coniferous species. They are sold at affordable prices and are characterized by increased water resistance. Materials needed for a sun lounger:

• glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
• boards 0.25 cm thick.
• wooden beam with a square section of 50x50 mm;
• 4 wheels with a diameter of 10cm;
• corners for strengthening the bed;
• door hinges;
• varnish or paint.

We suggest you make a chaise lounge according to this pattern.

Legend:

1. Front legs.
2. Hind legs.
3. Bearing longitudinal.
4. Back support.
5. Back support.
6. Bearing transverse.
7. Fixing bar.
8. Backrest support.
9. Wheels.
10. End beam.
11. Back slats.
12. Seat slats.
13. The support beam is transverse.
14. Fixing bar.

You can independently determine the size of the desired sun lounger and make calculations. Or use the standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.

Tools and materials

Before you begin making the Kentucky chair, you should prepare all the necessary equipment and materials:

• wooden beam;
• slats;
• roulette;
• drill with special attachments;
• sandpaper;
• jigsaw (hacksaw);
• hammer;
• pliers;
• pencil.

Particular attention should be paid to the choice of material for the manufacture of such furniture structures.

• Coniferous species. This base is rarely used in the manufacture of Kentucky. After all, almost all coniferous materials are straight; certain loads will lead to the formation of large chips on the surface.

• Multi-layer dense wood. This natural material will be an excellent option for the production of a Kentucky chair. Most often, oak, walnut and beech are used as such a base. These rocks have the most dense structure. They can easily withstand even significant loads. In addition, the surface of such wood has a beautiful and unusual pattern. It is better to cover such materials with stain during the manufacturing process.

• Aspen. This tree is particularly resistant to high levels of humidity. When carefully treated, an aspen base can easily withstand direct sunlight. Over time, the chair will not dry out or break.

When choosing a material for a Kentucky chair, you need to consider some other points. Wood will cost much less if you purchase solid wood rather than sawn wood. It can be quickly processed with your own hands using a circular saw or grinder. Also, when choosing a material, remember that external defects on the surface are undesirable. Surfaces even with small knots and other irregularities will not last for a long time.

Wood is considered a natural and environmentally friendly material, so it will be the best option for making garden furniture.

In addition, properly processed wood has a beautiful appearance. It is quite resistant to loads and mechanical damage, practically does not undergo plastic deformation, and when coated with special protective solutions it becomes resistant to moisture.

Assembling a chaise lounge on wheels

We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.

We sheathe the resulting frame with pre-prepared and sanded boards.

We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.

We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.

We screw the wheels to the center of the legs with bolts with a diameter of 30mm.

Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.

Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.

We should have two parts. The smaller one is intended for the headboard. We connect both grilles with door hinges. We install a support bar under the opening part.

All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.

For a more comfortable stay, you can sew additional mattresses that fit the size of the bed.

Simple sun lounger

To create a wooden chaise lounge with your own hands, you need the following materials, as well as tools:

• tape measure and square;
• pencil;
• saw;
• electric drill;
• screwdriver or screwdriver;
• screws, self-tapping screws and studs for fixation;
• sandpaper or grinder;
• wood putty;
• dye.

Wooden beams used in the work:

• for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
• 2 longitudinal bars for a frame 215 cm long;
• 2 cross beams -50 cm;
• 6 legs -35 cm;
• 13 slats for a seat measuring 2.5 x 8 x 60 cm;
• 6 slats for the back - 2.5? 8? 88 cm.

The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.

Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.

We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you

We make the back from 2 boards measuring 88 cm and 3 boards measuring 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.

We securely fasten the longitudinal strips. We round them for a more beautiful look.

Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.

We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.

A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.

Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.

Kinds

First, you should decide on the type of sun lounger. It can be made of wood, aluminum, plastic and synthetic fabrics. We will focus on a practical and easy-to-manufacture option - a wooden chaise lounge.

The wood for the product and its design is selected depending on:

• your preferences;
• availability of available materials;
• financial capabilities;
• style of your garden.

When choosing wood for a future sun lounger, you should take into account the physical and mechanical properties of certain types of wood. For example, beech, ash, larch or oak will last the longest. These are strong and durable materials, and they also have an aesthetic appearance. But this type of wood is quite expensive and weighs more than other types of wood, which makes the finished products more difficult to move.

A chaise lounge made with your own hands will not only save your money, but will also improve the garden and give it exclusivity. There is a varied variety of wooden chaise lounge designs.

Fabric chaise lounge

A chair with a frame complemented with fabric is one of the most comfortable, budget types of chaise lounges. It is convenient to fold and easy to carry. Can be stored flat. It takes up little space.

To create a sun lounger with your own hands you will need:

• bolts, nuts with a diameter of 8 cm;
• small nails with round heads;
• round sticks (1 piece -65cm, 2 pieces - 50cm, 2 pieces -60cm);
• rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
• needle file, fine-grain sandpaper;
• glue;
• durable material measuring 200 by 50 cm.

Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:

• birch;
• oak;
• beech.

Choose fabrics with maximum strength. Great fit:

• teak for mattresses;
• tarpaulin;
• canvas;
• camouflage;
• denim

These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:

• A.1200x600 mm.
• B.1100x550 mm.
• H.650x620 mm.

Cut the boards to the required length. We sand with sandpaper.

In the longitudinal bars we make indents of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Sand with a round file.

We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.

According to the diagram, we drill holes in the bars to connect the parts.

Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.

Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.

We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.

ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.

Classification by type of construction

There are three main types of designs inherent in sun loungers:

• Monolithic structure: to create it, it is necessary to connect all the components so that it cannot be disassembled in the future. This chaise lounge is particularly durable, which is an undeniable advantage. Speaking of disadvantages, we can note the fact that you will not be able to adjust the position of the backrest, and if necessary, you will not be able to fold the chaise longue. It follows from this that it will be extremely inconvenient to transport it;
• Portable design: as the name suggests, its features allow further assembly and disassembly of furniture. This chaise lounge is equipped with a special mechanism thanks to which you can adjust the position of the backrest;

Soldered design with inserts: As a plus, it has a rather attractive appearance. The disadvantage of the design is that the presence of inserts made of other materials does not guarantee its strength and durability.

DIY fabric chaise lounge. Model 2

For this chair you will need:

• wooden slats measuring 2x4 cm. Two slats each with a length of 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
• slats measuring 2x6 cm. One each 61 and 57 cm;
• 65cm wooden rod with a diameter of 1.2cm;
• a piece of fabric 137 cm long and 116 cm wide;
• bolts, washers, nuts, screws;
• glue;
• round needle file, sandpaper or grinder;
• electric drill.

Manufacturing process:

Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.

Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.

Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.

On the seat frame, step back 43cm from the top. Make holes.

On the piece supporting the back, drill holes in the center of the edges.

Process all holes with a round file.

Model installation

First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.

Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.

ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.

Install the back support piece using washers and bolts.

Sand away all imperfections. If desired, varnish or paint.

Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.

Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.

Step-by-step instructions for making a Kentucky chair

In order for a handmade Kentucky chair to appear in your home, you need to arm yourself with the necessary tools and strictly follow the manufacturing instructions. Conventionally, the whole process can be divided into 3 stages: assembling the backrest and seat, connecting these components.

Before proceeding directly to installation, the pine timber is cut into blanks. Their edges are sanded with sandpaper to create a smooth, even surface. You can arrange the cuts in the form of semicircles for a more aesthetic appearance.

Drill holes for fasteners according to the drawing.

The seat is assembled as follows:

1. The rods are laid on a flat surface in the following sequence: 2 short, 1 long, 2 short, 1 long, 2 short.
2. The pieces are aligned on one side.
3. Connecting strips are placed between the already located seat elements, aligning the holes for easy insertion of wire or pins.
4. The first and last connecting elements should be placed on the outer sides of the structure.
5. The wire is passed through the holes, the pieces are joined as much as possible. The edges are fixed with galvanized staples, hammering them in.

• The parts are arranged in the following sequence: long, medium, short, 2 medium, short, medium, long, the edge is aligned.
• The fasteners are threaded through the holes aligned with the top edges of the workpieces and connected so that they stretch appropriately over a short distance and rods can be inserted between them.

In the final step, the backrest and seat are connected by inserting connecting rods between the backrest elements. The holes are aligned and fasteners are threaded through them to be further secured.

If you are not sure about the correct tightening of the parts, it is better not to fix the wire immediately, but to fix it only slightly, and only after final assembly, install the brackets and cut off the excess.

When using a pin, the edge is secured with a nut and washers added to protect the wood from pressure.

Chaise lounge made of polyvinyl chloride

Another example of a lounger with a fabric base. Only in this case, wooden slats are replaced with PVC pipes. Chair sizes may vary.

In this do-it-yourself chaise lounge model we used:

• 2-inch polyvinyl chloride pipes;
• L-shaped connectors – 8 pieces;
• T-shaped connectors – 6 pieces.

First, connect 30cm and 45cm long PVC pipes for the vertical strip using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.

Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.

Do not hurry. Measure pipes accurately. As a result, you should end up with a rectangular structure.

Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.

Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.

You did everything right if you get a rectangle within a rectangle.

The seat is located between a long section of the vertical section and a short section of the horizontal section. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.

Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.

Description

The Kentucky Chair is a reclining lounge chair. Kentucky furniture has unusual designs, which is why it is often used to decorate the landscape. This laconic design consists of light wooden blocks of the same size. They are fastened together with strong metal wire and a pin.

The Kentucky chair consists of a comfortable back and seat. They are fastened together with the same strips, but shorter. All components of the structure are stacked one by one in a checkerboard pattern.

Installation of such a furniture structure can also be done outdoors, as it does not require the use of technical means. The product is assembled from small wooden elements. Most often it is built from various leftovers from the construction of a house or bathroom or barn.

Portable lounge chair

The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.

The collapsible chair consists of 2 parts:

• backrest covered with dense, wear-resistant fabric;
• wooden seat.

To create a chair, it is recommended to take cherry boards for the upper crosspieces and seat, as well as maple for the legs and supporting parts. You can also use pine wood.

In addition to tools, the following materials are used:

• 2 legs for the backrest measuring 20x40x800mm;
• 2 legs for the seat - 20x40x560mm;
• 2 lower crossbars - 10x50x380mm;
• 1 top crossbar - 10x40x380mm;
• 1 seat crossbar - 20x40x300mm;
• 5 slats - 20x40x400mm;
• piece of material - 600x500mm.

The procedure for assembling a portable sun lounger is shown in the diagram.

First, the parts are connected using self-tapping screws and a screwdriver.

The workpiece is processed and varnished.

While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.

We connect the back and seat of the chaise lounge.

Enjoying your holiday in your new armchair.

Pay attention to another interesting chaise lounge model in the video.

Preparing the circuit

To make a standard-height chair, a sketch is made based on standard indicators.

The drawing shows the details:

• a seat with elements for laying out parts so that the bars can be laid out according to the pattern before joining;
• back, taking into account the length with the rear legs;
• if the back is elongated, this is also noted in accordance with other assembly elements;
• In addition to structural details, they show the size and location of the dividers and front legs.

The drawing is convenient because if there are inconsistencies in the work, it is not difficult to identify the error in time and correct everything on the assembly or cutting diagram.

Kentucky chair

You can make the original look of a chaise lounge with your own hands. A sun lounger is assembled from bars. Convenient, easy to fold. Takes up minimal storage space.

For the chair you will need:

• 4mm galvanized wire;
• 16 staples;
• bars 30x55 mm.

Before starting assembly, it is recommended to treat the bars to protect them from ultraviolet rays and moisture. Choose an oil- and wax-based stain. Beitz is good. You can use parquet oil. Apply the product using a spray bottle or brush.

Kentucky chair installation

Drill the holes. Their diameter should be slightly wider than the thickness of the galvanized wire. Sand all rough spots and imperfections.

Fold the parts according to the photo and start stringing the boards onto the wire.

Secure it with brackets.

ADVICE. Instead of wire, use galvanized studs. They are secured with nuts and washers.

Raise the planks. The Kentucky chair is ready for use.

Original chaise lounge

Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.

To create a lounger you will need the following materials. And also tools:

• 2 sheets of plywood 2cm thick with a size of 160x180cm;
• 6 round strips with a diameter of 30mm and a length of 92cm;
• 12 planks made from leftover plywood measuring 94x10cm;
• dense fabric with a width of 92 cm;
• construction adhesive;
• screws;
• roulette;
• cardboard for layout;
• Circular Saw;
• electric drill.

Let's start creating a sun lounger.

Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.

We transfer the drawing onto sheets of plywood and cut out the side parts with a circular or band saw. At the junction with the round beam, we cut out recesses with a diameter of 30mm.

We sand all the unevenness and cutting defects.

We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.

Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.

We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.

We sand the product again. Now we hide the assembly flaws.

Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.

You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise longue entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.

ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.

Blueprints

The presented drawings will help you design a sun lounger yourself:

Drawing with dimensions of parts

Drawing of a wooden deck chair

Determination of height and length Design diagram

Scheme of a sun lounger with a canopy

Did the article help you?

Birch lounger

It must be said that our Russian craftsmen are distinguished by their ingenuity and creative approach. This chaise lounge is made by hand from birch logs. It is distinguished by Russian folk flavor. Perfect for garden plots.

The work uses:

• logs with a diameter of 75-120mm;
• drill and set of drills;
• electric saw;
• staples and screws;
• marker;
• electrical tape or chalk for drawing.

Let's start creating a sun lounger.

We saw the trunk into logs 45 cm long.

On the floor we draw a line for the future sunbed using chalk, or glue it with electrical tape.

We lay the logs according to the diagram. We drill holes with a drill and connect the logs using long self-tapping screws. We use a socket wrench for this.

Turn over the almost finished product. We are testing. We eliminate shortcomings.

For greater stability, we fix the back side of the lounger with brackets.

A monolithic birch chaise lounge is ready to delight you and your guests.

Unusual do-it-yourself sunbed for a summer house

Cheap but cheerful

The materials that should be used when working on a chaise longue are very varied. The myth that a chaise longue is a wooden chair is unreliable.

When working on its creation, a variety of materials are used, which are at the same time quite cheap, and can be found in any hardware store. A chaise longue can be made from:

• tree. At the same time, the chaise lounge will be strong, reliable, and the environment will not be harmed. The downside is that it weighs quite a lot (to make it easier to carry, you should attach wheels);
• fabrics. The base of the chaise lounge is pleasantly comfortable and convenient. The frame is made of wood;
• rattan The chaise lounge is, to a large extent, made for home decoration. It is environmentally friendly, but there is one big drawback - the price;
• plastic. Plastic sun loungers are very light, so you can safely take them on a hike. The frame is made of wood or a special pipe. Minus – poor reliability;
• PVC material. The lounge chair has a fabric base, but the base is made of PVC pipes.

Beginning of work

After the type is chosen and the material is selected, the work starts with drawing a drawing of the chaise lounge. The drawing plays a major role, since during its creation the dimensions, shape, additional inserts and much more are determined that will be included in the final work.

Not everyone can draw such a diagram, so if necessary, you should turn to specialists.