When returning home from work, the first thing you want to do is take off the shoes you’ve gotten tired of during the day and put on slippers. This simple ritual relaxes and encourages rest. Of course, you can buy slippers at your nearest store, but it is much more interesting to knit slippers with your own hands, because a hand made product is much more pleasant to wear. In addition, such a thing can become a cute and cozy gift for loved ones, children or friends. Hand-knitted products are valued not only for their unique design, but also for the special energy that the needlewoman puts into them when working.
How to knit simple women's slippers with knitting needles
Even a beginner in needlework can handle knitting slippers in a simple way. It’s better to start your journey in knitting slippers without a seam using 5 knitting needles.
Cast on 3 stitches and knit the first row.
Row 2: k10, p1, k10, p1, k10.
3rd row: knit according to the pattern
Row 4: k10, p1, k10, p1, k10.
Knit the product in this way until the 16th row. Now let's start knitting the heel according to the report: knit 10, purl 2. - center of the heel. At the end of the row, tie one loop on the side. We turn the product.
Row 17: slip 1, knit 10, slip 1 (center of heel), side knit stitch. Throw the removed loop over the knitted one. Repeat again and add 2 side heel pieces.
In even rows, purl the side and center loops together.
In the front rows we remove the outermost loop, the next front one and the removed one we throw over the knitted one.
To knit the central part you need 12 loops, add another 10 loops, casting along the edge.
Rotate the product. We knit the side and central loops, and on the opposite side add 10 loops to the edge.
In total, you will get 32 loops on three knitting needles. We knit one row with facial loops.
On the purl row we have a report: k10, p1, k10, p1, k10.
We continue to knit the slippers to the required height. At the end of the front row, add 8 loops and close the knitting in a circle.
Distribute the stitches onto 4 needles and then knit in garter stitch in the round.
We knit the slipper sock in stockinette stitch, starting with the first knitting needle and knitting 1 knit. loop, slip 1, knit 1. Throw the removed one over the knitted one, knit the remaining loops. We knit the loops on the second knitting needle, knit 1 together at the end of the loop.
We knit the loops on the third knitting needle as on the first knitting needle, and on the fourth knitting needle as on the second.
In odd rows we decrease evenly to complete the knitting. And then we will decrease in each row.
Then we close the remaining loops by folding the knitting needles two at a time together in parallel.
You can decorate your slippers with pompoms or other decorative elements.
Slippers-boots
Slippers in the form of boots are easy to knit. This knitting method, described below, is suitable even for beginner needlewomen.
Part 1 (see diagram below):
Initial steps:
- Dial 23 p.
- 44 rub. (15 cm) is knitted in garter stitch.
2nd part:
- At 45 rub. close 3 stitches and knit the row to the end.
- In 46. b. close another 3 stitches. And the row is also knitted to the very end. 17 p. left.
- 30 / 36 / 42 rub. (which = 10/15/14 cm) is knitted in garter stitch.
3rd part:
- In the next 4 days. close 2 sts each, and rows are knitted to the end = 9 sts.
- In the next 2 r. close 1 p. In total, 7 p. remain.
- In the last row, all loops are closed.
4th part:
- 19 stitches are cast on with a thread of the main color.
- The same thread is used to knit 18 r. "garter stitch"
- Next 2 p. knitted with yarn of a different shade.
- Next they knit, changing the threads every 2 r.
- This is how they knit 8 r.
- Then another 18 rubles. knitted with thread of the main shade.
- The loops are closed.
- The details of the slipper are connected and sewn to a felt or any other sole of your choice.
Seamless slippers with knitting needles: how to knit without a seam with a description
Beautiful slippers can be knitted on just two needles and you don’t even need to sew them later, as they are knitted straight from the toes to the heel using circular knitting needles. You can choose the knitting pattern at your discretion.
Cast on 26 stitches to start knitting beautiful slippers without a seam. We knit the heel 12 rows high, alternating between knits and purls. The number of rows should be equal to the height of the heel. It may be different.
Next, we knit the sole of the slippers: knit a row with the front loops, only tie the 18th and 19th loops together behind the back wall. We knit the purl row until there are 7 loops left on the second knitting needle and tie the two in front of them together. This way the loops will decrease until they run out.
We knit the sides of the slipper. Cast on 7 loops on each side, and hook the last loop to the top one - this way the transition will not be visible.
Using the tail that was left over when casting on, knit 8 knits. and continue knitting with the main thread. Place 7 loops on the knitting needle from the other side and knit the front row.
Knit a purl row, and then alternate knit and purl stitches to the required depth - the middle of the thumb using white thread. You will get 24 loops on the knitting needle.
Making loop decreases:
Front row: 5 loops, 3 in., 6 loops, 3 in., 6 loops
Purl row (no decreases).
Front row: 4 loops, 3 in., 4 loops, 3 in., 5 loops.
Purl row.
Front row: 4 loops, 3 in., 2 loops, 3 in., 4 loops
Purl row
Front row: 2 loops, 2 in., 2 loops, 2 in., 3 loops
There are 9 loops left on the knitting needle.
How to knit a sock: purl stitches to the end of the row, at the last stitch, hook a loop from the side braid and purl a stitch. You will get 10 loops. Turn the fabric and in the next purl row, hook one side loop at a time. You will get a knitted slipper on two knitting needles without a seam.
Front row: 3 loops, 3 in., 3 loops, add 1 loop from the side braid. Knit further to the required length of the sock.
We close the row like this: knit 2 knits and put the loop on the knitting needle. Hook the last loop onto the side loop using a hook and pull it inside the sock.
How to knit slippers from a rectangle with knitting needles: detailed description
Finding a simpler version of knitted slippers is almost impossible. After all, they are obtained from a simple rectangle, the size of which must be calculated depending on the size of the foot. One edge of the rectangle can be crocheted.
In this version, the rectangle has a size of 10*35 cm, knitted in garter stitch from YarnArt yarn 35% wool, 65% acrylic, 260m/100g). But you must take into account the composition and thickness of the yarn.
For slippers size 36-38, cast on 50 stitches. We knit 90 rows in garter stitch and bind off the loops. Crochet the top row with double crochet stitches every 3 stitches.
Bend the finished rectangle at the corner at the toe and sew the sole. Sew the sole of the rest of the slipper and sew the two parts of the slipper on top under the posts.
To knit slippers using rectangle needles, you will need some yarn, so you can knit them from leftovers.
Rectangular slippers
Slippers are made on the basis of a rectangular fabric knitted in garter stitch.
How to do it:
- Dial 50 p.
- Knit a strip along the length of the foot, approximately 90 rubles.
- Then the loops are closed.
- Then tighten the loops of the sock.
- The knitted fabric is folded in half, facing down.
- Next, the seam of the heel piece is sewn onto the outer loops.
- On the reverse side, the knitted strip is divided into 3 parts.
- On the right, 2/3 is tied with thread. She is tied up.
- The left end is placed on top and then sewn. This is a slipper for the right foot.
The slipper for the left foot is assembled in reverse: 2/3 is pulled off on the left, but the right part is already placed on top and also sewn.
Knitting openwork slippers on two knitting needles: master class
Beautiful openwork slippers can not only warm your feet at home, but also lift your spirits.
Any medium weight yarn is suitable for knitting openwork slippers. Select the knitting needles according to the yarn.
Size 23/25/25.5
Cast on 13 stitches
1st row: knit 3, yarn over, pull through, yarn over, double pull through, yarn over, 2 stitches in one, yarn over, knit 3.
All even rows are knitted with purl stitches.
3rd row: k4, double broach, yarn over, 2 loops in one, yarn over, k4.
Row 5: k4, knit 2, knit 2, knit 5.
Row 7: K3, 2 loops in one, 2 loops in one, k1, yarn over, pull through, k3.
Row 9: K2, 2 loops in one, 2 loops in one, k1, yarn over, 2 broaches, k2.
Row 11: knit, 2 loops in one, 2 loops in one, knit 3, yarn over, 2 broaches, knit.
Row 13: 2 loops in one, 2 loops in one, knit 5, 2 broaches
Row 15: knit, yo, broach, yo, broach, k3, 2 loops in one, yo, 2 loops in one, yo, knit.
Row 17: K2, yarn over, pull through, yarn over, pull through, knit, 2 loops in one, yarn over, 2 loops in one, yarn over, k2.
Row 19: same as 1st
21st row: like 3rd
23rd row: like 5th
Row 24: purl
How to knit a sole
We start knitting from the thumb. Cast on 17 stitches and knit 2 rows using stockinette stitch. 3rd row: from the first and last loop we knit 2 loops, k1. fourth row with purl stitches.
Repeat the increments 5 times. You will get 29 loops.
Continue knitting until the length is 16.5/18/20.5 cm.
In the next row, knit *1 knit, 2 stitches in one knit.*, repeat ** until the last 3 loops, 1 pull, 1 knit. Knit 3 rows without additions. Repeat the last 4 rows 3 times.
You will get 21 loops. Next in the row: *k1, 2 stitches in k1.* repeat until last 3 stitches, pull 1, k1. we knit the purl row, and the next one like this: *knit 1, 2 loops in knit 1.* repeat until the last 3 loops, stretch 1, knit 1. Next is the following row: *P1, 2 stitches in P1. behind the back wall*, repeat until the last 3 loops, 2 loops in 1 purl., 1 purl. repeat last row 2 times.
Cast off the remaining 11 stitches to create a heel.
We knit the upper part:
Starts with the thumb. Cast on 17 stitches and knit 2 rows. In the 3rd row, knit 2 loops from the first and last loops, finish the row with 1 person. Then the purl row is knitted.
The openwork pattern is knitted like this: knit 2 from 1 stitch, place a marker.
Knit 1 row with an openwork pattern (as described above) of 13 loops, put a marker, knit 1, from 1 loop - 2 loops.
The next row is knitted with purl stitches. Repeat the last two rows 4 times and finish with 10 rows of lace pattern. There are 29 loops in total.
Next we knit like this:
1st row: 3 knits, 2 loops in 1 knit, yarn over, 3 knits, 11th row of openwork pattern, 3 knits, 2 loops in 1 knit, yo, 3 knits.
All even rows are knitted purl
3rd row: 2 knits, 2 loops in 1 knit, yo, 2 loops in 1 knit, yo, 2 knits, 13th row of openwork pattern, 2 knits, 2 loops in 1 knit, yo, 2 loops in 1 knits., yarn over, knit 2.
5 row: 3 knits, 2 loops in 1 knit, yarn over, 3 knits, 15th row of openwork pattern, 3 knits, 2 loops in 1 knit, yo, 3 knits.
We knit 5 rows without decreasing, knitting 16-20 rows of an openwork pattern
11 row: 3 knits, 2 loops in 1 knit, yarn over, 3 knits, 21 rows of openwork pattern, 3 knits, 2 loops in 1 knit, yo, 3 knits.
13 row: 2 knits, 2 loops in 1 knit, yo, 2 loops in 1 knit, yo, 2 knits, 23rd row of openwork pattern, 2 knits, 2 loops in 1 knit, yo, 2 loops in 1 knits., yarn over, 2 knits.
Row 15: K3, 2 stitches in k1, yarn over, bind off 5 stitches, k7. (including loops from the knitting needle after casting), 2 loops in 1 knit, yarn over, k3, on the last 12 loops make decreases along the edge in 3 rows, 9 loops in total.
Rows 17-18: no decreases
Row 19: K4, 2 stitches in k1, yarn over, k3.
Row 21: K3, 2 stitches in k1, 2 loops in k1, k2.
23rd row: like 19th
Rows 25, 27: knit stitches
Repeat the last 10 rows until the height is 14.5/16/18 cm.
The last row is purl and you can bind off the loops.
To make openwork slippers look beautiful, tie the top edge. To do this, cast on 81/91/101 loops and knit 2 rows, closing the loops.
Assembling openwork slippers
Sew the back seam. We sew the double sole, folding the parts with the wrong sides. Sew the top to the double sole.
Spokes
To knit slippers on 5 knitting needles, you need to purchase a special set of knitting needles called hosiery knitting needles. They can be metal, wood or plastic.
The knitting needles also differ in diameter, which is recognized by the markings. For knitting slippers, the size of the knitting needles is selected in accordance with the thickness of the yarn. If you choose yarn 250-300 m/100 g, then knitting needles No. 2.5 or No. 3 are suitable.
Knitted slippers with felt soles
There is one drawback to homemade knitted slippers - the soles wear out quickly. Therefore, it would be more practical to decorate knitted house slippers with felt soles.
You can knit slippers in any way.
Measure the length of the insole and add a couple of cm of margin.
We measure the height of the heel.
Knit a long strip with knitting needles and attach it to the sole. Stepping back 0.5 cm from the edge, sew the strip to the sole.
It is necessary to lay out an overlapping strip at the front.
Knitted slippers with felt soles are knitted very quickly and will last for a long period.
Single knitted slippers for women
Knitting women's slippers with knitting needles in one piece is as easy as shelling pears; there is no need to sew the sole and upper part together afterwards. The way it works is that you knit one piece and then simply sew it together with two seams.
Materials:
- Yarn: Nako (wool blend, 100g/210m)
- Knitting needles No. 3.25
Cast on 45 stitches
1st row: chrome, knit 6, * purl 1, knit 1 * – 15 times, purl 1, knit 6, chrome
2nd row: chrome, knit 6, *k1, purl 1* - 15 times, k1, k6, chrome
Rows 3-50: repeat rows 1-2 up to 16 cm in length.
We continue to knit with an elastic band
Row 51: chrome, *purl 1, knit 1*, repeat, purl 1, chrome.
Row 52: *K1, P1*, repeat, K1, chrome.
Rows 53-70: Repeat rows 51-52 until you have knitted the required length of the foot.
We make reductions:
Row 71: chrome, *knit 2 right*, repeat until last 2 stitches, knit 1, chrome. only 24 loops
Row 72: edge, *2 in.*, repeat. Chrome. There are 13 loops in total. Close the loops.
Sew the heel and top of the foot.
How to knit women's slippers with knitting needles
Women's indoor slippers can be associated with comfort and warmth, but in cold weather it is simply difficult to replace them with anything. You should take care of the onset of the cold season in advance and knit a pair of cute and warm, but cozy house slippers.
These slippers can be knitted from leftover yarn of different colors.
Materials
- Yarn NakoBambinoMarvel 50g/130m
- Knitting needles No. 3.5
Cast on 26 stitches
Knit 4 rows with knit stitches and change the yarn color.
Row 5: knit 10, yo, knit 4, yo, knit 10, yo
Next, knit all even rows with knit stitches, not forgetting the edge rows.
Change the color of the yarn every 4 rows.
7th row: chrome, knit 11, yarn over, knit 4, yo, knit 11, chrome
Row 9: chrome, knit 12, yo, knit 4, yo, knit 12, yo
11th row: chrome, knit 13, yarn over, knit 4, enakid, knit 13, chrome
We knit this way until there are 54 loops.
Knit 4 rows with knit stitches.
How to knit a sole:
1st row: edge, knit 31, purl 2, turn the product
2nd row: edge, knit 8, knit 2, turn the product
3rd row: edge, knit 8, purl 2, turn the product
4th row: edge, knit 8, knit 2, turn the product
Knit until 10 stitches remain. Pick up 18 stitches on each side and continue decreasing. Close all loops.
Slippers without seams
These slippers are knitted without seams. For work, you should prepare half-wool or wool yarn - 2 skeins of 100 g / 250 m, knitting needles No. 3.
Knitted slippers for beginners - step-by-step instructions for creating ballet slippers.
Technique:
- Dial 13 p.
- 8 rub. knitted with a “shawl pattern”.
- From 9 p.m. loops begin to be added.
- Knit 1 chrome, 5 “plates. elm.”, 1 person.
- Again 5 “boards. elm.”, nak., 1 person.
- Again 5 “boards. elm.”, 1 chrome.
- In purl. R. knitted, following the pattern.
- Everything is on. knit with a purl crossed stitch.
- In subsequent persons. R. make yarn overs.
- In other words, after the “payments. elm." and before it comes the addition of loops.
- The rows are repeated until 39 stitches remain on the knitting needles.
- Then the middle 9 stitches are separated. The toe is rounded in the same way as the heel.
- Knit 15 stitches, knit 9 – 10 together.
- The product is rotated.
- They knit 8 5, and 9, 10 again connect 1 p. and so on.
- There should be 9 central stitches left on the needle.
- Then, on each side of the edge of the toe, a hem is picked up. = 18 p.
- The total is 45 sts.
- They are distributed as follows: chrome, 5 “plates. elm.”, 1 p. Then 4 p. “harness”, 1 p., 21 knits. smooth surface
- Then comes 1 purl, again 4 stitches from the “harness”, 1 purl. Next are 5 “boards. elm.". Chrome. complete the series.
- In the “harness” the loops are shifted in every 4 rows: 2 stitches are left before work on the auxiliary needle, then 2 stitches.
- Then knit 2 stitches from this knitting needle.
- In purl. R. The loops are knitted according to the pattern.
- Total 36 – 40 rub.
This model fits foot sizes 35 – 37.
The heel piece is knitted like the toe:
- To begin with, highlight the central 9 sts.
- At the end of the row 8 p. knitted with a “shawl pattern”.
- Finally, the loops are closed.
- The slippers are decorated with a flower, bow or pompom.
Slippers knitted with your own hands are cozy and comfortable home accessories. The models presented here for beginners are not complicated. Such products are easy to knit with knitting needles in 2 – 7 days.
Square slippers: how to knit
Every home should have irreplaceable attributes that indicate comfort and coziness: an apron in the kitchen, soft pajamas in the bedroom, and it’s better to wear warm slippers on your feet. Despite the fact that stores offer a good selection of clothing and accessories, any housewife can knit slippers with her own hands. Knitted square slippers are one of the easiest to make.
The side of the square is equal to the length of the foot. Choose thicker yarn to knit the slippers faster and make them stronger.
Materials:
- Lanoso Alpaca yarn (35% wool, 25% alpaca, 40% acrylic, 100g/130m)
- Knitting needles No. 5.5
Cast on 33 loops
1st row: chrome, knit, chrome
2nd row: chrome, knit, chrome
Continue knitting with a garter pattern until you knit the required size.
Close the loops and sew the heel and sole.
Color, design and decor
Yarn of any color is suitable for making home slippers. You can choose it according to your preferences. Products that combine several colors that overlap with each other, or in a single range of shades, look beautiful. Usually, when planning to knit slippers, needlewomen give preference to dark tones, since such products will be as practical as possible. However, you should not be guided solely by rational motives. After all, even banal women's slippers can lift your spirits with their colors. For the fair sex, bright pink, lilac, and burgundy shades are suitable. If girls prefer more delicate colors, then you can choose yarn in pastel colors, such as ash pink, blue, and muted green.
Knitted slippers for women are often decorated. These can be models decorated with bows, embroidery, pieces of fur, or appliqué. Often shoes for young girls are decorated with the ears of bunnies and cats. Products with pompoms look very cute and cozy.
Men, as a rule, prefer discreet, strict colors. Therefore, for the stronger half of humanity, you can make dark gray, blue, green, burgundy slippers. Men's models are decorated with embroidery, laconic appliqué, and fur. Products for children can be made from bright yarn: yellow, green, blue, red. Slippers stylized as animals look original and unusual. These can be models decorated with armpits, bunnies, dogs. Children's shoes are decorated with beads, ribbons, pompons, and embroidery.
When choosing a shade of yarn, you should first of all focus on your own preferences. If the product is planned to be given as a gift, then, of course, you need to find out what color the future owner likes. Today, stores offer yarn in a wide variety of colors; everyone can find something they like.
Knitted slippers from knitted yarn: master class for beginners
Knitted yarn has many advantages - it holds its shape perfectly and has an original appearance.
It is better to crochet the sole, so it will be more dense and practical.
Materials:
- Knitting yarn
- Hook No. 6, No. 7
- Knitting needles No. 5.5
- Scissors
To knit the sole, cast on the required number of stitches:
- Size 36: 17 loops
- Size 37: 18 loops
- 38-39 sizes: 19 loops
- 40-41 size: 20 loops
- 42-43 size: 21 loops
In the second loop from the beginning of the set, tie a single crochet. Next we make 10 stitches and knit a half double crochet and 6 double crochets. In the outer loop we make 5 double crochets.
Turn the knitting and repeat in reverse order. Knit 2 single crochets into the outer loop (increase). Connect the row with a single crochet.
To knit the second row, we cast on 3 air loops and tie 2 double crochets in the first row. The rest are single crochets.
The last 5 columns are knitted first, knit like this: the first two are 2 tbsp. double crochet, third - 3 tbsp. double crochet, the last two - 2 double crochets.
Knit the next row with a double crochet until increased. We knit 1 stitch in the first loop, and two stitches in the second. Knit 1 stitch into the outer loop. Let's connect the row with the outermost loop in the first row.
Let's knit another such piece without cutting the edge of the thread. Put the parts together and pull the thread through the first part and knit all the loops with connecting posts.
We knit the upper part of the slipper using garter stitch.
Cast on 16 loops and knit 22 rows in turning rows.
In the 23rd row we begin decreasing - after removing the edge loop we knit 2 loops together. Let's close the loops. We transfer the thread to the other side and knit three peli together. Return the loop to the base and knit 2 together to the end of the row, and the last three loops together.
Sew the upper part to the sole with crochet number 6
Yarn
The appearance and comfort of knitted slippers depends on the yarn. When choosing threads for knitting, you need to pay attention to the composition (it should be pure wool or half-woolen thread) and the thickness of the thread (it is better to choose threads of medium thickness, where per 100 g of thread weight the length is no more than 300 m).
When knitting slippers for children, special children's yarn is selected: soft, hypoallergenic, with a safe composition. The color of the yarn is selected individually. It should be remembered: if yarn of different colors is used, it must have the same texture and thickness.
Slippers Shells knitted: description of knitting
Knitted shell slippers will fit snugly on your feet, will not let you sleep, and will thus warm your feet on winter evenings. The choice of indoor slippers is great, but you can knit slippers with your own hands in an evening while sitting in front of the TV, so you shouldn’t even make a choice in favor of store-bought shoes.
To knit slippers with shells, you will need two colors of medium-thick yarn and needles No. 5
Slippers are knitted from top to bottom with knit stitches.
Cast on 31 stitches using the main color. And we knit 3 rows with facial loops. Attach a thread of the second color and knit 2 rows with it, and then again 2 rows with the first thread.
The main pattern consists of repeating 4 rows. Make a mark on the middle loop to use for knitting fans.
Row 1 (thread 2) front row: edge, knit, remove the loop (thread behind the work), knit, remove. Repeat these stitches until the middle loop. To keep the pattern symmetrical, remember which stitch came before the middle one.
The middle loop is knitted like this: from one loop you need to knit 7 - knit the first one, without removing the loop from the left knitting needle, make a yarn over, from the same middle loop, knit the third one, and then yarn over again, another loop, yarn over, knit a loop and remove the middle loop from the knitting needle .
Now it is important to remember which loop was before the middle one and tie the same one after the middle one. And then continue alternating loops.
2nd row: we knit the loops with thread 2 and remove them with thread 1 (thread before work).
Rows 3-4: knit 1 thread.
By knitting fans the slippers will expand. Repeat knitting them until you get the desired result.
Knit 2 rows with thread 2 and 5 rows with thread 1 in garter stitch.
This is not exactly a sole for us, but a closure of loops, because it includes 7 loops from the white stripe. Mark the middle loop. We will use three middle loops that will create the sole. The remaining loops are the side walls of the sneaker.
We knit the loops of one side wall with knit stitches up to 3 middle ones, we knit the first 2 of them with knit stitches, and the third together with the loop of the side wall.
Turn the product and remove the first one as an edge piece. The second will be the front stitch, and the third will be knitted together with the side stitch. Rotate the product.
We repeat this until one loop remains on the side of the walls, and there are 5 loops in total. Close all loops.
We make a seam - back and heel at once.
Lazy jacquard slippers
Knitted slippers for beginners in the form of “lazy jacquard” are made using acrylic of different shades. It is preferable to choose a light tone.
Start:
- First, knit the cuff with a classic elastic band.
- Using a thread of a dark shade, cast on 71 sts.
- Knit 5 r.
Knitting a toe
Execution order:
- The 36th middle stitch is highlighted.
- Additions are made in odd rows of any color.
- On each side of the central loop, add 1 stitch.
- This is done by tying them out of the broach.
- The middle loop is knitted only with thread of one shade.
- In other cases it is removed.
- In persons R. the working thread is left behind the stitch, and in purl. R. - ahead p.
When the cuff is knitted, a “lazy jacquard” is knitted. A thread of a different tone is included in the work.
Technique:
- 1st row: knit 3 knits, remove 1 p. This is how they knit until the middle st. From there they knit in the reverse order.
- 2nd row: removed loops are retaken again. The rest knit faces. The thread is changed to another.
- 3rd row: knit 1, remove 1 stitch, *knit 3. Then 1 is removed again. From the asterisk sign, the sequence is repeated until the marked point. 1 point is added on both sides. Then the actions are repeated in the reverse order.
- 4th row: knitted like 2 rows. The loops added earlier knit the faces.
- Next 38 rub. knitted, repeating the pattern of the 1st - 4th r.
- The side element is ready.
Knitting soles
Execution technology:
- 4 rub. knit, changing shades. The light thread is cut off. The end is secured.
- In the next row, all loops are knitted to the marked p., + 5 p.
- One loop is removed from the left knitting needle. The second one is knitted.
- Throw the 1st stitch onto the 2nd stitch located on this knitting needle.
- The product is unwrapped.
- Then the 1st stitch is removed, knit 11, vm 2. purl
- There are 11 stitches left in the middle. From the inside out, the outer loops are knitted together with the next one.
- From persons sides 2 stitches are knitted together. persons n. with broach.
- Having turned the product again, the 1st point is removed.
- On the wrong side the thread is left in front of the work, and on the front side - behind it.
- Thus, braids were formed on the sides of the sole.
- Continue knitting until there are 5 stitches left on both sides.
- Add an additional cut.
- 2 sts., taken from the sides, knit 1 person.
- The loops of the sole part are reduced by 1 p. As a result, 1 p. should remain in each row.
- The remaining loops are pulled together. The end of the thread is cut and fixed.
- The slippers are sewn along the back side - from the heel to the cuff.
Knitted slippers Boots with two knitting needles
Boots knitted on two knitting needles will help warm your feet on a cold evening.
Sizes: 35-36/37-38/39-40
Materials:
- Yarn AlizeSuperlanaMidi (25% wool, 75% acrylic, 100g/170 m - two thread colors (A, B)
- Knitting needles No. 6.5 No. 5.5
- Hook
Take thread B and cast on 40/43/46 stitches with cast-on edge using crochet hook
Continue knitting with thread A
Row 1: chrome, *k2, purl 1*, repeat ** until last 3 stitches, k2, chrome.
2nd row: chrome, *yo, knit 2, throw yarn over through knitted ones, knits*, repeat **, yo, knit 2, drop yarn over through knitted ones, chrome.
Rows 3-20: repeat rows 1-2
Row 21: chrome, *k2, purl 1*, repeat ** until last 3 stitches, k2, chrome.
Row 22: chrome, *purl 2, knit 1*, repeat ** until last 3 stitches, knit 2, chrome.
Rows 23-38: repeat rows 21-22
The thread can be cut.
We knit the upper part of the foot over the central 14/15/16 loops, and now the wrong side will become the front side.
Row 1: (purl) slip 13/14/15 stitches, join thread A, k13/14/15, purl 1, turn work
2nd row: chrome, 12/13/14 faces, chrome
Rows 3-25/3-29/3-33: repeat row 2
Knitting fingers
1st row: chrome, 2 knits to the left, 8/9/10 knits, 2 knits to the right, chrome.
2nd row: chrome, 10/11/12 faces..., chrome
3rd row: chrome, 2 knits left, 6/7/8 knits, 2 knits right, chrome.
4th row: chrome, 8/9/10 faces, chrome.
5th row: chrome, 2 knits left, 4/5/6 knits, 2 knits right, chrome
Row 6: chrome, k6/7/8, chrome. Total 8/9/10 loops.
We cut thread A.
Knitting the foot
Connect thread B to the beginning of the row
Row 1: (knit) chrome, k12/13/14, pick up 16/18/20 sts on the right side of the top of the foot, k8/9/10, pick up 16/18/20 sts on the left side canvas of the top of the foot, 12/13/14 faces, chrome. total 66/73/80 loops
Knit 9 rows with knit stitches in a garter pattern.
Knitting the sole
Row 1: chrome, knit 2, knit 24/28/31, knit 2, knit 3, knit 2, knit 3, knit 2, knit 2, 24/27/31 faces., 2 vm.faces., chrome. Total: 61/68/75 loops
2nd row: chrome, knit, chrome.
3rd row: chrome, 2 vm., knit 23/26/30, 2 vm., 2 knits, 2 vm., 22/26/29 knits, 2 vm., chrome . total 56/63/70 loops
4th row: chrome, knit, chrome.
Row 5: chrome, knit 2, knit 21/24/28, knit 2, knit 1, knit 2, knit 2, knit 2, knit 2, 21/25/28 faces., 2 vm.faces., chrome. Total 51/58/65 loops
6th row: chrome, knit, chrome
Row 7: chrome, 2 knits, 19/23/26 knits, 2 knits*-3 times, 20/23/27 knits, 2 VMs, chrome. total 46/53/60 loops
Row 8: edge, knit 23/25/30, knit 0/2/0, turn the product
Cut the thread, leaving a 60 cm tail. Sew the back seam and the seam on the sole
Knitted Turkish slippers: knitting patterns
Slippers are knitted using the Turkish method quite easily and are made from one whole knitted piece. Therefore, this option of knitting a slipper may appeal to many.
Materials:
- Yarn NakoNakolen (49% wool, 51% acrylic, 100g/210 m)
- Knitting needles No. 3,%
Cast on 50 stitches.
1st row: chrome, *1 purl, 1 knit.* -4 times, 32 knits, *1 knit, 1 purl* -4 times, chrome.
2nd row: chrome, *k1, purl 1* -4 times, k32, *purl 1, k1* -4 times, chrome.
Repeat rows 1-2 until the height is 18 cm (or the final length of the foot is -15% - 1 cm)
We make reductions:
1st row: chrome, *1 purl, 1 knit* - 4 times, *2 vm.*-16 times, *1 knit, 1 purl*- 4 times, chrome.
Row 2: chrome, *k1, purl 1* - 4 times, knit 16, *purl 1, knit 1*-4 times, chrome.
3rd row: chrome, *1 purl, 1 knit* - 4 times, *2 vm.*-8 times, *1 knit, 1 purl*- 4 times, chrome.
Row 4: chrome, *k1, purl 1* - 4 times, knit 8, *purl 1, knit 1*-4 times, chrome.
Row 5: chrome, *1 purl, 1 knit* - 4 times, *2 vm*-4 times, *1 knit, 1 purl*- 4 times, chrome.
Row 6: chrome, *knit 1, purl 1* - 4 times, knit 4, *purl 1, knit 1*-4 times, chrome.
Row 7: chrome, *p1, k1* - 4 times, *knit 2* -2 times, *k1, purl 1* - 4 times, chrome.
Row 8: chrome, *k1, purl 1* - 4 times, knit 2, *purl 1, knit 1*-4 times, chrome.
Bind off the stitches and sew the closed edge and top of the foot.
Tie the edge with half-columns
