Chrysanthemum from foamiran: master class with video selection

This step-by-step master class covers a chrysanthemum made from foamiran for beginning needlewomen. It is easy to find a practical use for a luxurious flower. It can be used to decorate brooches, hairpins, and hairbands.

If you have a lot of time, make a bouquet, wreath or flower arrangement in a basket. Flowers made of plastic suede look like natural plants. Thanks to tinting, the petals turn out natural and very believable.

Craft materials

To make a beautiful chrysanthemum with your own hands, prepare:

• foamiran green and the color of baked milk (size A4); What kind of material is this and how to work with it, read in our introductory publication;
• simple and manicure scissors;
• notebook and landscape sheets;
• glue;
• acrylic paints in pink and marsh shades;
• pencil, pen with a non-working rod.

Additionally, you need an iron with a temperature switch.

If you have never worked with foamiran and are afraid, try starting with an even simpler craft - a keychain in the shape of a funny dog. However, handicrafts with this material cannot be considered difficult.

Preparing patterns for petals and leaves

First you need to make a chrysanthemum pattern from foamiran:

1. From a notebook sheet, cut out a square with a side of 10 cm.
2. Fold it in half.
3. Fold the resulting rectangle in half again.
4. Bend the square diagonally.
5. Fold the triangle in half too.
6. Cut the resulting segment roundly into the shape of a petal.

Unfold the blank, you should get a flower template. Trace it with a pencil on a landscape sheet and fold it again. Trim about 0.5 cm from the edge. You should end up with a smaller template.

Repeat this four more times, cutting out a smaller template each time. The smallest blanks should have thinner petals. There are six patterns in total.

To pattern the chrysanthemum leaf, first draw a trefoil. From the top draw three more petals. Draw the cloves of the shamrock.

How to make a chrysanthemum from foamiran

Place the paper blank on the foamiran and trace it with a pen with a non-working rod (no paste!). Cut out the leaf and draw veins with a pen.

Also, using a non-working pen, make flower blanks. There should be 9 layers in total, more is possible. Also cut out a circle with a diameter of 2.5 cm and cut its edges with a fringe of 1 mm.

Lightly dilute acrylic paints with water. Using a brush or fingers, apply the tint in a circle. The edges will appear.

Cut out all the layers of the flower; it is more convenient to do this with nail scissors. Tint the reverse side. Let it dry. Heat the iron to the "Wool" setting.

• After a few seconds, the edges of the workpiece will begin to bend inward.
• Also tint and treat the leaves of the flower.

Now you need to give the chrysanthemum made from foamiran a realistic shape. To do this, bend the petal and carefully rub it left and right with your fingers. Be careful not to tear.

In this way, you need to process each petal. For the center, prepare a strip 25 cm long and 1.5 cm thick. Cut the fringe 0.9 cm long and 1 mm thick along the edge. Iron for 2-3 seconds. Coat the edges with glue and roll it up.

Consistently assemble the chrysanthemum, applying glue to the middle of each layer of foamiran. Lastly, glue the leaves.

1. These are the luxurious flowers you will get in the end.

Due to the fact that acrylic paints were used in the work, the chrysanthemum will not suffer from minor ingress of water. But you should not expose it to washing or washing in the shower. We recommend paying attention to peony and rose, which are also made of plastic suede.

Secrets of how to make a beautiful chrysanthemum from foamiran with your own hands were prepared by Natalya Neustroyeva, step-by-step photos by the author. Get creative and have fun!

Source: https://zhenskie-uvlecheniya.ru/krasivaya-xrizantema-iz-foamirana-svoimi-rukami-poshagovyj-mk.html

Bouquet of unfading tulips

If you want to make a realistic tulip with closed buds, then a visual diagram will help you with this. You can use any shade of material you like. Such a bouquet will be an exclusive gift for Mother's Day or March 8, and will delight its owner for a long time. To create a tulip we will need:

• dense foamiran of bright colors for buds and an olive shade (for creating leaves and stems);
• floral wire and buds;
• nail scissors (with straight or pointed ends);
• glue and tape of any green shade;
• alcohol-free wet wipes;
• dry pastel (you can use crayons);
• thick cardboard for the pattern (whatman paper will do);
• a wooden toothpick or manicure stick, as well as tweezers.

When all the materials are laid out on the table, you can start creating our tulips. First, we cut out the templates from which we will make the petals. In our case, the height of the blanks is 6 cm, and the width of the largest part is 3.5 cm. The length of an arbitrary template for leaves is 26 cm, the width is the same as that of the petals. Using a toothpick or a manicure stick, we trace the templates on foamiran, and then cut them out details. We need 1-2 leaves and 6 petals for one flower. We tint the blanks using dry pastels. To achieve the desired effect, shade the paint with a damp cloth, simulating gradient transitions. Tint the bottom of each petal so that it is slightly darker than the top. You should get it as shown in the photo.

You can decorate green leaves in the same way. If desired, you can add floral veins.

Read also: Babylonian civilization

Now we model the shape of the petals. To do this, we apply our blanks to the outer surface of the iron, heated in the “wool-silk” mode. Initially, slightly stretch the workpiece in width, and then in length. Carefully form a small indentation with your fingers, while pulling the petal. Look at the picture. This is what should happen in the end. Now we model the fold on the leaves. Place the piece of paper on the iron and fold it lengthwise. It should look like this. Let's start collecting the buds. To do this, we cover floral blanks or foil balls with petals. We fix the first three on the core so that it is not visible. We place the next three petals in a checkerboard pattern with the previous ones and also glue them. We return to the leaves. We carefully glue a piece of floral wire into its middle so that it becomes as flexible as possible. We assemble the flower. To do this, we wrap the stem body with green tape, simultaneously fixing the leaves. Our tulip is ready. In the same way, you can make a whole bouquet by decorating it with additional leaves.

Chrysanthemum from foamiran - how to make a hair decoration with your own hands

With the arrival of autumn, it’s time to remember another seasonal flower - the chrysanthemum. She is sung and revered by poets and artists. Many myths and legends are dedicated to her.

It is known that archaeologists found images of the solar flower on fragments of pottery and marble, on ancient coins and in patterns of oriental porcelain.

As you may have guessed, this master class is dedicated to chrysanthemums made from foamiran.

Materials and tools:

• — foamiran Silk LUX apricot color;
• - dark green foamiran;
• - scissors;
• - stick or toothpick;
• — second glue;
• - two sheets of thick white paper;
• - sheet mold;
• - foil;
• — pastel white, orange, red, green;
• - iron;
• - base (rim, comb, clip, pin);
• - enormous patience.

How to make a chrysanthemum from foamiran with your own hands

Foamiran is a material that is perfect for creating natural and beautiful chrysanthemums. Today, the chrysanthemum is an unusual flower. He is popular only in everyday life. They decorate wedding bouquets or use them in floristry. Create flower arrangements with the addition of this beautiful flower for any occasion. Its variety is so great that using foamiran you can create any type.

It can be a large white foamiran chrysanthemum or a yellow terry one, as well as a bush one. She is also very popular. The result is real and lively compositions that can quite realistically be performed independently, even without extensive professional experience.

Beautiful chrysanthemum from foamiran: master class

Let's start by preparing the necessary materials. The shape of the flower is simple, so any craftswoman can make it without much difficulty. Various materials are used for production. But the most common is foamiran.

It turns out to be a beautiful and unusual flower, which is why it won the attention of many girls.

For work, you should prepare special materials. This is foamiran of the required color, scissors, a heat gun, an iron and toothpicks.

In order to make a neat chrysanthemum, you must first take care of the availability of templates for work

Master Class:

1. First of all, templates are created. Special round blanks are drawn on cardboard.
2. Draw a chrysanthemum on the templates. You can use ready-made parts with drawings.
3. All received blanks are transferred to the foamiran. There should be as many circles as there are cardboards themselves.
4. Circles are cut out on the material. If there are no divisions, then fold the circle in half and cut lines along the edges, not reaching the middle. Then, the same cuts are made on the resulting halves and quarters.
5. To get the flower shape, the sides need to be rounded. For this, simple scissors are used.
6. Using an iron, shape the resulting parts. First to each circle, then to the petals.

The work ends with the fact that all the resulting blanks should be combined into one flower. In the middle of each circle, coat with glue and place a workpiece of smaller diameter. Add all the parts together in this way. The result is a beautiful chrysanthemum.

How to make a chrysanthemum template from foamiran

For the work you will need special materials and tools. Foamiran for a flower of the required shade, acrylic varnish, iron, glue, scissors. If it is a brooch or a hairpin, then there is a special fastening. You can give a different shade to a flower using paints. They are applied using a sponge.

Before starting the manufacturing process, you should first decide on the color of the flower and select foamiran of the appropriate shade

Stages of work:

1. It is necessary to prepare the blanks. A strip 15 cm long and 1 cm wide. And also squares (3 pieces - 4x4 cm, 2 pieces - 5x5 cm, 7x7 cm, 8x8 cm, 9x9 cm).
2. A fence with sharp edges is created from the strip. Circles should be cut out of the squares.
3. Circles of 4 cm can be completely tinted with a sponge, the remaining parts only in the middle. This will give a natural shade to the composition.
4. Parts of 4 cm are cut into 12 parts, large workpieces are divided into 16 parts. Do not cut to the middle of the circle.
5. We sharpen the petals and bend them using an iron. The temperature gives the petal its shape.
6. After rounding the edges, wind the long strip onto a toothpick. Other circles are attached to the base of the resulting flower with glue.

This is how the composition is obtained. Step by step, a beautiful chrysanthemum appears.

It is recommended to place the petals of the next row in a checkerboard pattern. In relation to the leaves of the previous circle.

DIY chrysanthemum pattern from foamiran

Each flower turns out original and unique. Precisely because they create it on their own, using their own imagination. You can make templates and patterns yourself, or use ready-made ones.

Sometimes it's hard to figure out patterns on your own. Then a detailed master class comes to the rescue.

You can learn more about how beautiful chrysanthemums are created from foamiran in an interesting and exciting master class

Educational lessons are necessary to create natural beauty correctly and accurately with instructions.

How to make a chrysanthemum from foamiran for a beginner

To work, you need to take foamiran, a pin for a brooch, scissors, a ruler, a pencil, a toothpick, glue, and an iron. A brooch in the shape of a chrysanthemum is very popular. It is attached to the shoulder, collar, trousers, and also in other most unexpected places.

Chrysanthemum from foamiran master class (variety “Shamrock”), photo step by step

Before the master class, we stock up on foamiran and available tools.

To create a chrysanthemum you will need:

• foamiran for the flower (I took white, you can choose any other); yellow and green for leaves;
• green oil pastel and sponge;
• instant glue;
• scissors;
• lighter and iron;
• universal mod;
• wire 1.2 mm;
• tape;
• cocktail tube.

First, let's see what kind of flower we should get as a result of our work.

Chrysanthemum from foamirna, photo

Making a template for the chrysanthemum. From white foamiran we cut out chrysanthemum petals of four sizes (15 pieces of each size). Small - 4.5 * 3 cm, second -5.5 * 4.5 cm, third - 6.5 * 5 cm, fourth - 7.5 * 6.5 cm. Cut all petals according to the indicated dotted lines . Then cut out a strip of 2 cm * 15 centimeters from yellow foamiran.

Cut the strip into medium-sized fringe.

We process the petals of the first and second sizes on an iron at silk-wool temperature, so that the petals are bent, and on the underside of each petal we apply a strip (texture) with the blunt side of a knife.

Petals of the third and fourth sizes are also processed using an iron, but we apply the texture to the petals from the wrong side at 1-3-5. Turn the petal over and apply a strip to petals 2 and 4.

We prepare the center of the chrysanthemum from the yellow fringe. We take the wire, make a hook on it, put fringe on it and wind it at the same level, sometimes gluing it.

Then we take small petals and begin to glue them to the base slightly overlapping, 5 petals in a row. We glue the remaining small petals overlapping in a checkerboard pattern.

In the same order we glue the petals of sizes 2 and 3.

This is how we collected the entire chrysanthemum from foamiran. Now let's move on to the leaves.

From green foamiran we cut out a sepal and several leaves.

We process them with an iron at a silk-wool temperature and squeeze them well on a universal mold. We process each sepal leaf separately, first heat it one at a time, then squeeze it one at a time onto the mold. If there is no mold, draw the texture of the leaves and sepals with a stick.

We apply the tint with oil pastels, using several shades of green; if desired, you can tint the edges a little with brown pastel.

Treat the tops of the leaves with a lighter, heat them, then pinch the tip and pull.

Glue the leaves onto the litons and cover with acrylic glossy varnish.

Since the chrysanthemum has a fairly strong stem, today I will use cocktail tubes to thicken the wire. Place the tube on the wire and glue it to the sepals on top.

We take tape and process the stem of the chrysanthemum and immediately attach the leaves to the stem.

The white chrysanthemum is ready. It can be added to any bouquet of foamiran chrysanthemums.