DIY wooden comb. How to make a wooden hair comb with your own hands

Combing a woman's hair is considered an almost ritualistic act. Our distant ancestors made hair combs from wood, believing that this simple accessory helps restore strength and protects the entire female half of the family from the evil eye. In our world of artificial materials, it is much more difficult to buy combs made from natural materials than from plastic or metal. But those girls who have tried to use a wooden comb for their hair will not exchange it for anything else.

Pros of wooden combs

The main advantage of a comb made from natural wood is its environmental friendliness. When in contact with the hair and scalp, such an accessory will not release harmful chemical compounds, but, on the contrary, with the help of healing essential oils, it helps improve the overall condition of the curls.

In addition, a wooden comb will not electrify your hair. Daily brushing will make them smoother and shinier. In addition, oak or juniper products will help cope with such an annoying problem as split ends.

If you have already asked yourself a question, do not rush to go searching, perhaps you yourself, or someone from your environment, will be able to cut it out. We will tell you how to do this below.

Car organizer made from jeans

This device is characterized by increased reliability and simplicity, because it is made of dense and strong denim fabric. You can buy a special piece for this, but it would be much more practical to make a product from old pants. In this case, you can use not only back pockets, but also belt loops, which will serve as fastening elements for round objects.

You might be interested in this: How to sew a beautiful bow from fabrics yourself

Seat back option

There are many options for making a device made from pants. You can leave the back part to the knees, and cut off the remaining legs and sew them in the form of additional pockets. Another option involves sewing the pants into a rectangle and sewing on the compartments. In any of these cases, it is necessary to provide for mounting on the rear surface of the car seat or on its cover.

How to make your own wooden comb

In this section we will try to tell you step by step how to make a comb from wood with your own hands. The manufacturing process will require your time and attention, but they are always valued higher than mass-produced items in a store.

So, for work we will need:

A rectangular block of wood. The sizes depend on what kind of comb you want. We will take a small model 8 by 10 cm, the thickness of the board should not be less than 6 mm;
Circular saw and grinder;
Sandpaper of different grain sizes;
Burning machine (if you want to decorate the product with a design);
Linseed oil

Combs are best made from hard wood, such as beech or juniper, but fruit trees - cherry, plum, peach - also work well. Often craftsmen make it from birch.

We take our piece of wood and sand it on both sides. On the resulting blank, draw the shape of the ridge with a pencil, and then cut it along the contour with a circular saw. If you don’t have such a saw at hand, you can take a regular jigsaw for wood.

Now you need to divide the comb lengthwise into two parts. On the lower part we will cut teeth for combing. Typically, the width of one tooth is from 2 to 3 mm, and the distance between them is about 1.5 mm. We also do this using a circular saw.

The next step is to sharpen the plane of the comb towards the end of the teeth. We grind the entire product on a grinding wheel, and at the same time sharpen the teeth. To ensure that the comb is perfectly smooth, we polish it manually with sandpaper.

Now it’s time to decorate the comb. You can burn a floral ornament on a flat surface, or the name of the one who will soon become its owner. You can leave the product without burning; the texture of the wood itself is unique and delightful.

The final touch is to saturate the finished comb with linseed oil. Heat the oil to a low temperature (it should not burn your fingers, as very hot oil can warp the wood), lower the comb there and leave until it is saturated. Then the product must be dried at room temperature. This usually takes from 1 to 2 days.

Your handmade wooden hair comb is ready! We hope that our tips on how to carve a comb from wood will be useful to you, and you will delight your beloved women with a stunning gift that will be appreciated!

A great gift for a girl, even if she currently has short hair. Perhaps in a couple of years she will want long curls and a comb will come in handy. In addition, none of your friends will definitely have the original comb with a figurine of a sleeping cat!

On the topic: methodological developments, presentations and notes

The activity game will help to bring to children's consciousness the need to maintain a clean body, including having a neat hairstyle. Teach children to use a comb.

Consultation for parents.

Educational areas: “social and communicative development”, “cognitive development”, “speech development”, “artistic and aesthetic development”. Pedagogical technologies: health-saving.

Form ideas about a personal hygiene item - a comb. Age target: children 2-3 years old.

Goal: To introduce children to the history of the comb. To identify the acquired knowledge, ideas, and skills that children acquired during the school year. Objectives: - improve the ability to find.

An interesting lesson summary for the second junior group on the topic: “Drawing a comb.”

The notes and presentation will help in conducting IOS on the surrounding world in the preparatory group.

Source

How to make a hair comb with your own hands

We draw the contours of the ridges on the tree. The diagram is attached.

Using a jigsaw, we cut out the ridges along the contour.

We clamp a sheet of sandpaper into the holder. We need to grind the workpiece at an angle to the ends so that the combs fit into the hairstyle more easily.

Now we take small pieces of sandpaper and round all the corners, especially carefully rounding the ends. Combs without seals are already ready to be coated with stain and oil.

Seal combs are a little more complicated. We select cats along the contour using incisors. The main thing is to take your time and periodically sand the cat figurine with small pieces of sandpaper. The lines should be smooth and flowing.

We tint the combs with water-based stain (1-3 layers). Let it dry thoroughly for a couple of hours.

Apply teak oil liberally and leave for 15-20 minutes.

Remove excess oil with a paper towel or rag. After 3-4 days, the oil will be absorbed and the comb will be ready for use.

All that's left to do is make the gift wrapping!

The properties of a hair comb depend not only on the shape, but also on the material. Different types of material have different properties. You won’t confuse white and brown bread, right? They can also be the same shape - but they will be completely different. It's the same here.

In this article, we will look at what materials modern hairdressing combs are made from, what their advantages and disadvantages are - and which one is better to prefer in what circumstances.

Master class: miniature comb

1 I made markings for the future comb on an ice cream stick. I outlined with a gel pen, but it would have been better to use a simple pencil. It can be easily wiped off with an eraser, and it doesn’t stain your hands.

2 I used a knife to cut out the base for the comb. First I used a knife and then sandpaper to round the edges.

3 I cut out an oval pillow from fabric. But during the process I realized that leather would be more suitable for these purposes. If you hold it over the candles, the edges will bend and you will get the shape we need in the form of a shallow cup.

4 I threaded the fishing line into a needle and “stitched” our pad so that it turned out to be about thirty cloves. The length was left at least 15 mm on each side. I think you could use toothbrush bristles instead of fishing line, but fishing line is easier and faster.

5 Now it was necessary to secure the pins from the inside. To do this, I brought the fishing line to the candle and held it for several seconds, about 5 cm from the flame. The high temperature melted the line and curled into balls, thereby fixing itself in the cup.

6 I marked a place for the pillow. It would be possible to immediately glue the pad to the wooden base, but then the edges of the skin would be visible. To avoid this, I made a small indentation with a knife. This is where a wood carving knife would come in handy.

Making a wooden comb is not that difficult if you have the opportunity to work on woodworking machines. First of all, we need a board, even if not edged, the thickness is also not important here. We will make a comb from it and, accordingly, reduce it to the size we need.

The website dslaboratories.ru presents professional hair care cosmetics. Using a circular saw we cut the board to a thickness of 6 mm, this is very difficult. Therefore, make all the markings in advance, especially since you will have to work along the material. It’s better, of course, to play it safe and do everything slowly.

We choose the width and length of the comb ourselves, approximately 2 cm and 12 cm. This will be enough; there is no need to use a large comb either. As soon as the workpiece is ready, we begin to cut teeth on it.

Most likely, we will proceed from the parting frequency. This means we make teeth 1.5 mm thick, and the distance between them is 1 mm. Although you can divide it into two parts and make the other half larger.

We perform all manipulations on a circular saw, therefore, we exercise maximum caution. It is advisable to use protective equipment to prevent chips from getting into your eyes. After you have finished cutting out the teeth, you need to polish the comb.

You can use sandpaper or a machine, only with a fine-grained wheel. Upon completion, we scrub it thoroughly, varnish it and it is ready for use. In principle, the comb is ready, the main thing is not to pull the hair too hard so as not to break the teeth.

Sewing a leather bag is not that difficult, although the process is more creative than physical. You will need materials that can be found in the store or use those that you have at home. How
Laying floor tiles may not be that difficult, but you do need to have some knowledge. Most of all, she doesn’t like unevenness, so first of all we level the base. Since there is to be
Perhaps there is not a single stage of work performed during the construction of a house where edged boards are not involved. With its help, foundations are poured, frames and doors are made, and construction
Every girl loves to experiment with her hair and different hairstyles. Naturalness has always been and will be in fashion, so it makes no sense to do neat and complex hairstyles during the day. Even
If you've ever had to remove a drilled-out piece of wood from a hole saw, you know how difficult it can be to remove it without damaging it. With a simple grip, you can easily pull out

In this article, we will look at what materials modern hairdressing combs are made from, what their advantages and disadvantages are - and which one is better to prefer in what circumstances.

Combs made from natural materials - wood. Advantages and disadvantages

Before the advent of carbon combs, this natural material was considered the most gentle for hair. A properly processed wooden comb is much safer for your hair than, for example, metal.

However, it was combs made of wood that lost ground long ago. Massage brushes - yes, please, but wooden combs for professional use are almost never made. Why? Because how do you shape wood into the shape of a modern shading comb? Firstly, it will be expensive - there is so much to cut out of a piece of wood. Secondly, the strength of thin teeth will differ little from the strength of a toothpick. Who needs it?

So at Mustang we use wood in massage brushes, where its gentle qualities come in handy - and we make working combs from other materials:

Lesson on application “Wonderful comb”

Alina Valyaeva
Lesson on application “Wonderful comb”

MBDOU "Combined kindergarten No. 29"

organized educational activities with children of the middle group in the educational field “Artistic and Aesthetic Development”

on the topic: “ Wonderful comb ”

Compiled and conducted by A. N. Valyaeva

Sergiev Posad city

Application “ Wonderful comb ”

for children of middle preschool age

Teach children to make an image of a comb from short strips of paper.

Develop the ability to hold and use scissors correctly.

Reinforce techniques for careful gluing. Develop fine motor skills, develop children's horizons and vocabulary using artistic words; develop free communication skills with adults and children.

Form initial ideas about a healthy lifestyle.

Cultivate the habit of taking care of your appearance and using a comb .

Materials: landscape paper with a picture of a comb , 5cm colored strips, scissors, glue, tray, brush, oilcloth, cloth.

Equipment: Masha doll, wonderful bag , multi-colored combs .

Metal combs. Advantages and disadvantages

Metal combs treat hair in an evil way. There may be microscopic nicks on the metal edge - and each of these nicks cuts hair like a saw tooth. These nicks may appear due to insufficient processing - it would not be so bad, it would be done well and that’s all. But they can also appear during storage and use. If you drop a metal comb, it begins to take revenge on you, cutting your hair so that it begins to split. High-quality processing will not insure against this.

But, again, metal remains as a working material in massage brushes. Only on each metal clove there should be a plastic ball on top - this way it will not damage the scalp. And the clove itself, of course, has no edges and is cylindrical in shape. This makes the metal safe for hair.

Why use it at all? The fact is that metal is much stronger than wood and plastic - so the teeth can be much thinner, and nothing will happen to them. And if you need a massage brush with thin teeth, then it will, of course, be a metal brush:

Preview:

Application “Wonderful comb”

for children of middle preschool age

Teach children to make an image of a comb from short strips of paper.
Develop the ability to hold and use scissors correctly.
Reinforce techniques for careful gluing.
Learn to follow drawing techniques.
Cultivate the habit of taking care of your appearance and using a comb.

Materials: landscape paper with a picture of a comb handle, colored strips 5*10 cm, scissors, glue, tray, brush, oilcloth, rag.

V.: artistic word: (combing the doll) “Grow the braid to the waist, don’t lose a hair. "

The toy hare is crying:

V.: Guys, the bunny’s teeth on his comb broke. And now he cannot clean himself up and go on a visit. Guys, how can we help the bunny get ready for a visit?

V.: That’s right, we can give him and his friends new combs.

V. explains and shows how to correctly cut a strip of paper into small strips. show how to properly hold scissors and cut with them. Then everyone shows together how to work with scissors.

We assemble a comb from the finished strips (teeth).

V. shows the children how to hold a brush correctly.

V.: We put glue on a brush and spread the stripes on the white side on the oilcloth. Carefully glue and press each “tooth” with a cloth.

During work, the teacher helps children who are experiencing difficulties. At the end of the lesson, they look at the finished combs all together. The teacher (on behalf of the bunny) praises the children. "Bunny" is happy

Combs made of plastic. Advantages and disadvantages

They do not have the disadvantages of metal and wood, but they also lack their advantages. Not as dangerous to hair as metal, but not as gentle as wood. Because plastic also receives microdamage, which can also cause harm to hair - but not as severely as metal nicks.

Plain plastic collects static electricity and electrifies the hair. This is a problem - and it's not even a matter of electricity snapping your fingers. It wouldn’t have been so bad, but it clicked and clicked, funny.

But electrified hair gets frizzy - it’s unruly. This is one hair repelling another, if anything - like the identical poles of two magnets. Divide this effect by the fact that the hair is thin and does not push back much - but multiply it by the number of hairs on the head. What will happen? The result will be chaos.
And electrified hair collects dust. They attract small particles that surround you - like different poles of two magnets. And small particles are, in general, dirt. Therefore, hair becomes dull and dirty faster, so you have to wash it more often and dry it more often - and this destroys it.

The situation is solved, for example, by the Soft Touch coating - it does not electrify like that. But they cannot cover the working surfaces of the main combs - they must be smooth. Fortunately, there is now another option - simply change the material of the comb.

Stages of making a comb

The length of the board taken should be 11 cm, thickness - 7-9 mm. Cut a piece about 12 cm long and 10 cm wide. Then sand the resulting workpiece with a special tool or sandpaper.

After this, draw comb lines on the workpiece. Rely on your taste and use your imagination, but be sure to keep in mind that on one side the edge of the comb will be straight.

The next step is to cut out the outline of the product and move on to the teeth. Their optimal thickness is 3 mm, and the gap between the teeth is 2 mm. Don’t be too lazy to draw the markings with a pencil in advance, and only then cut out the teeth themselves. Next you need to grind these teeth, for this you will need a grinding machine with a small attachment. Using sandpaper, we bring the teeth to the desired size and shape. Our comb is almost ready. At the end, the finished product is coated with varnish or wood stain.

This comb is easy not only to style your hair, but also to create complex women's hairstyles. For example, a cascading haircut https://www.pillow.su/kaskadnaya-strizhka-na-dlinnye-volosy-ne-nado-brit-zatylok-dlya-kreativnosti/ on long or medium length hair usually does not require complex styling, and such a wooden comb will be quite sufficient for hair care. You can also use this comb to part your hair and separate curls for braids and ponytails. Therefore, wooden combs are actively used in hairdressing and beauty salons.

If desired, your comb can be decorated with carvings, burnt ornaments, or patterns using the decoupage technique. You can also find pictures on the Internet of homemade combs on which pebbles, rhinestones, and shells are glued.

For those who don't have special tools at hand, there is an easier way to create a comb with your own hands. To do this you will need toothpicks or wooden skewers.

We weave openwork leaves on a comb

These leaves will look more complicated to make, but in reality they are also very easy to make with your own hands. You will also need quilling strips and a comb. How to make openwork leaves on a comb step by step. Take a green quilling strip and a comb with large teeth. We place a strip under one of the cloves, leaving the tip about 5 centimeters free. We will work with the other, long end.

Place a strip on top of the bottom clove. Now we pass it from below through two cloves. We put it under a short ponytail so that they match.

Again we pass the long end over the adjacent clove, but this time on the top. We lower the strip down and take it out from under the first loop.

Now the next clove. And again we take it out from under the loop.

In this way, we continue to braid the teeth of the comb until we get the required number of loops. Carefully remove the workpiece from the comb, holding it with your fingers so that the loops do not unravel.

We begin to bend the workpiece with loops inward. You should get a leaf like this.

We cut off the middle and glue the tip, wrapping it around the leaf along the outer edge.

A video lesson with a visual description of the process will help you understand this quilling technique in more detail.

Video: Twisting quilling leaves on a comb

These leaves can be given a more elongated or sharp shape by bending the loops with your fingers and choosing a wider pitch when braiding the cloves.