2021 ᐈ

Peculiarities

Many people consider boxes to be trinkets that simply take up space. They're actually quite functional.

They are often used to decorate the interior. Moreover, if the style requires a large number of small details, you simply cannot do without boxes. In order for such decorations to be appropriate, you need to carefully consider their design.

They help to maintain order and properly organize the storage of various things. The practicality of such a container is determined by its strength, size and shape.

The fruits of your labor can be safely used as a gift. Moreover, such a gift will appeal to both a very young girl and a fairly adult woman. Moreover, the box, depending on its design and purpose, can be presented to a man. Sometimes people accumulate a lot of little things that simply need to be placed in suitable boxes.

Beginners who are faced with making boxes for the first time should pay attention to cardboard. It is no coincidence that this material is popular. Among the advantages of cardboard are:

environmental friendliness;
ease of processing;
low cost;
availability.

Cardboard can be found in any office supply store. In addition, it can be safely reused. There are many ways to decorate a finished cardboard product; you can choose any that suits your strengths and abilities.

Partition structure

To figure out how to make a plasterboard partition, let's turn to engineering reference materials. A simple single-layer wall has three main elements - a load-bearing metal frame, sheets of plasterboard and an inner layer of mineral insulating boards. The frame is made of a special metal profile with a section of 50x50 mm and 50x40 mm. Its cladding is made with sheets of plasterboard (gypsum plasterboard).

The question often arises as to which drywall is best for a partition. Professionals recommend using material with a thickness of 12.5 mm, since the new interior wall should be as durable as possible. Thinner sheets of 9.5 mm can be used for finishing main walls, but it is better not to use them as cladding when installing partitions.

The internal space of the partition is filled with mineral insulating material. It provides additional sound insulation between rooms and also serves to create a thermal barrier.

Once assembled, 1 m² of structure will weigh 28 kg, which is quite normal for such a wall. If there are additional reinforcing elements inside, provided for attaching furniture or plumbing fixtures to them, then the total mass of the wall will increase accordingly. The maximum permissible height of the partition is 8 meters. Most often, this value does not exceed 3 meters, since the standard ceiling height in most apartments ranges from 2.5 to 2.7 m.

The technology for attaching to the floor will be described in the next section. The diagram below illustrates in detail the location of all elements in the structure.

The installation diagram of the partition to the ceiling is similar. These images were compiled by professional engineers and published in a directory of typical building structures, products and assemblies.

Some stages of work, such as chamfering the upper edge of the gypsum board adjacent to the ceiling and putting it on, will be omitted from the instructions. They are not mandatory in conditions of non-professional do-it-yourself assembly, and in addition, they require the use of specialized equipment. The functional significance of these elements does not directly affect the strength and durability of the entire structure.

In the table below you can see a list of materials that will be required for the construction of a section of plasterboard interior partition with an area of 1 m².

As mentioned earlier, the standard are profiles 50x50 and 50x40 mm. Guides and racks of large dimensions are used in rare cases; they are practically never encountered during renovations in an apartment or during interior finishing work in a private house.

Choice of shape and size

When making boxes, it is important to carry out all the steps in stages - this way the work will progress more smoothly and will not require too much time. The first step is to determine the shape and size. These parameters depend on the amount of material, location and purpose. In addition, the degree of difficulty must correspond to the skill of the manufacturer. , simpler options are better

square;
rectangular.

Next, you can try to make a round box or in the shape of a polyhedron. These varieties are the most common and traditional.

Since cardboard cuts, bends and crumples quite well, you can find more complex products in the form of a heart, shell, suitcase, watch and even a piano. In the same vein, you can make a hiding place, disguised in the form of a book or the base of any figurine.

In addition, the box may have:

concave or curved sides, cover;
legs, handles, hinges, locks and other fittings;
drawers.

Decorative boxes are designed to store:

money;
documents and photographs;
jewelry and costume jewelry;
business cards and stationery;
hours and much more.

For people who deal with a lot of small parts, organizers with internal compartments are necessary. Boxes for handicrafts or creativity are made using the same principle.

Boxes can be either very tiny - up to 5-7 cm, or large - up to 20 cm or more. Small ones can be placed on small surfaces - open shelves, bedside tables, tables. Volumetric ones take their place in the closet. In principle, their parameters are limited by the size of the cardboard sheets.

In addition, it is worth considering that the walls and bottom of wide organizers must be strengthened, since the cardboard will sag. And decorating small boxes is much more convenient and less tedious.

Reel storage

Spools of thread should be stored so that thin threads do not unravel or become tangled. If sewing is your favorite hobby, then you undoubtedly have a lot of such material. In this case, you can use the drawers of your bedside table or chest of drawers, which are equipped with special inserts with pins on which the coils are placed.

The palette of threads for machine embroidery, for example, can have a fairly large number of shades of the same color. In this case, transparent plastic buckets will help you store the coils, in which you can put the coils according to a certain color.

Seven daily habits of happy people

The star of the series “Sultan of My Heart” spoke about the choice of his future wife

25 children of a childless man: an extraordinary reunion

You can sew a convenient and practical organizer for spools with your own hands - add a piece of thick fabric with loops made of regular underwear elastic, under which the spools will be tucked.

You can also set a goal in a craft store to find a convenient option for storing spools of thread. For example, in the form of a transparent rotating barrel on a stand.

Necessary tools for creating a casket

Before you start making the casket, you need to prepare the basic tools. Below is a list of what must be at hand, since sometimes during the work there is no time to be distracted by searching for available tools.

Scissors
Paper
Clear adhesive tape
Glue
Ruler
Pencil
Eraser
Penknife

Materials for decorating the chest:

rhinestones,
clothespins,
laces,
ice cream sticks,
threads,
postcards, etc.

Regarding the last point, you can look for materials for decoration after the casket is ready, since it will take some time for the glue to dry well.

Also, if necessary, you can add to the above list, because making crafts is a purely individual process and each person’s imagination works differently, so other improvised means can be added.

Decorating boxes

Storage boxes are covered with wrapping paper, newspapers and magazines. It turns out very original.

They can also be painted and varnished - this way they will last longer.

What is used for decoration:

beads;
sequins;
beads;
paper and ribbon flowers;
applique made of colored paper in the form of butterflies, flowers, animals and people;
beautiful fabric;
various papers;
lace;
small decorative elements for scrapbooking and other types of needlework;
bows made of satin ribbons, etc.

Decoupage boxes

The cardboard box is painted with white acrylic paint. Wait for the product to dry. Choose beautiful decoupage napkins and cut out elements from them.

They are pre-placed on the surface to visually see the future result.

Begin gluing, smoothing with a brush with glue over the cut out napkin layer.

When all the elements have been applied, they are tinted, where the composition requires, with acrylic paints (possibly with glitter).

Leave until completely dry and cover with acrylic varnish for decoupage.

If you want to do handicrafts and please your loved ones with original gift packaging for the holidays, then they make chic boxes of various sizes and colors. They decorate them to your taste and give them to your loved ones with all your heart.

The most common materials for crafts

As for materials for creating a box, there are many options. It all depends on the ideas and available tools of the master. Below are the materials from which caskets are usually made, as well as master classes on the intricacies of making caskets from different materials. So, basically, boxes are made from:

Cardboard
Postcards
Newspaper sticks
Popsicle sticks
Shoe box
Plywood
Matchboxes

Of course, the materials can be completely different, depending on what a person has at hand, but the above are the most common.

Shoebox Craft

One of the simplest (but no less attractive) are the original boxes made from shoe boxes. You can easily make them with your own hands and give them absolutely any appearance.

Tools and materials

If you like this master class, then to implement it you will need:

shoe box with lid;
scissors and glue composition;
high density cardboard;
fabric or paper for decorating the finished product.

It is recommended to place all the necessary components in the immediate area where creative work will take place. You should immediately put aside everything that will interfere and distract the master from making a creative box.

Step by step diagram

If all of the above items for needlework have been prepared, you can proceed to modeling a beautiful box from a shoe box.
The base in the form of a shoe box is already there, so all that remains is to effectively design and decorate it.
Shoe boxes, as a rule, are quite large in size, so there will be room to roam around and get creative. The inside of the future box can be decorated with soft woven material. Fleece would be an excellent solution.
The outer part of the box can be covered with sheets of colored paper, or you can resort to a very original design with decoupage.
The design of a homemade shoe box can be made even more impressive and rich if you use decorations in the form of shining rhinestones, sequins or sparkles. There are incredibly many options on how to make such a box original and attractive.
The next step is to design the inside of the box. This part of the structure can be divided into several separate sections/compartments. For separation, use strips cut from high-density cardboard. Next, these cardboard parts can be covered with colored paper to give the inside of the box a more attractive look.
A product equipped with such separate sections is very convenient to use for storing a variety of creative items, sewing items, cosmetics or decorations.
By designing a shoe box, the craftsman can let his imagination run wild. The external design of such a homemade product can be absolutely anything! The product can be made monochromatic, or you can give it a brighter multi-colored look - there are no restrictions in style and design.

From cardboard

A heart-shaped small storage chest can be a wonderful gift for Valentine's Day or any other holiday. To make this craft, you need to prepare PVA glue, 3 sheets of colored cardboard, a ruler, a measuring tape, beads and paper flowers for decoration. On the cardboard you need to draw 2 hearts the size of the future box.

The heart intended to serve as a lid should be 1 mm larger. Then, using a centimeter ruler, you need to measure the perimeter of the heart, cut 2 strips of the required length with notches on one edge, with which they are glued to the bases. After the glue has dried, all that remains is to decorate the casket and the gift is ready!

Knitted boxes and baskets

With a little effort, you can create stunning crocheted storage boxes. Such products are suitable for the interior of any room. The original solution is boxes for the dressing room. Such items will not only decorate the interior, but also make it more functional and practical. They are used to place all kinds of things. You can make stylish decor with your own hands.

Detailed lessons on how to weave a basket yourself, as in the photo, follow the link!

Compact and spacious baskets will help create coziness in the kitchen. To make them you will need a hook and ribbon knitted yarn. Such products can be used for storing nuts, eggs or baked goods.

Additional storage containers will also come in handy in the bathroom. With their help, you can correctly place all the items. Original baskets can be fixed in one of the corners of the room.

The elegant decor is also suitable for decorating the living room. You can store blankets, books, firewood or TV bullets in it. A similar basket is especially appropriate in the hallway. Changes, bank cards, wallet or keys will fit inside.

This knitted item looks perfect as a flower pot. Bright decorative elements will create original accents in the room.

Crocheted boxes are best made using a crochet hook. There are a large number of schemes with which you can create an original product.

Baskets made from Ribbon or Spaghetti yarn, braid, rope or knitted yarn are popular. To create decor, you can choose synthetic or cotton yarn. This material is a continuous narrow strip. Products made from yarn are knitted in a short time and hold their shape remarkably well. The original box is ideal for the garden. The basket can be made with or without handles. You can also create a knitted item from old T-shirts, cut into ribbons. The knitted strips should be pulled in different directions so that the edges are rounded. A 10 mm hook is used for this work. Knitting a basket begins with an amigurami ring. For this you will need a special circuit. Then knitting is done in a circle.

From postcards

It’s not at all difficult to make a beautiful box if you have old postcards with beautiful drawings lying around at home. To make it, you only need scissors, sewing thread, 5-6 postcards, a needle, a ruler, and a pencil. First of all, you need to sew 4 postcards together, and then the cover is sewn separately on one side. After this, a box is made from thick cardboard, also by sewing the sides together and all sides are covered with fabric. The postcards sewn together need to be slightly bent and sewn to the cardboard frame. The lid is sewn on last.

Paper decor

The design of the boxes can be extremely varied. We offer you a very simple and interesting option. This way you can design any product.

Decoration algorithm:

tubes are formed from A-format paper;
twisted tubes are glued to the box around the perimeter, maintaining a distance of 3 to 4 cm;
the decor is glued in a vertical direction;
the tubes are glued, bending towards the base;
the places inside where the paper guides are glued are hidden with thick cardboard;
The lid and sides of the box are decorated in a similar way.

From newspaper sticks

In addition to newspaper, pages of old books or glossy magazines are suitable for twisting “straws”. First, you need to cut the material used into strips about 5 cm wide. Then you need to take a knitting needle and wind a sheet on it diagonally. In this case, the tip of the sheet must be glued with glue. You should have about 18-24 sticks on hand.

The sticks are painted with paint according to the needleworker's taste, and time is given for the paint to dry. Then you need to take a piece of cardboard of the shape that the casket is supposed to be and glue the painted tubes to it. After this, the entire contour of the bottom is first braided with one longer stick and the remaining tubes are glued onto it until the desired height is reached.

When the box reaches the desired height, you can bend and trim the ends of the tubes. Then you can start making a lid for the casket by gluing a textile bow or other decor onto it.

Casket of greeting cards

From the most ordinary postcards, using thread and a hook, you can make a wonderful casket!

To do this, you need to prepare and cut out all the parts for a rectangular box: the bottom, the lid and four side parts.
The density of the blanks must be strengthened by duplicating them with several layers of cardboard.
At the same time, all parts must have postcards on the front and inside sides.
The subjects of the pictures are selected at will.
The layers can be lightly fixed with glue to each other.
Next, using a hole punch or an awl, carefully make holes along the edges of all rectangles at an equal distance from each other.
Using a hook and thread we connect the fragments together.
We tie the lid of the box on all sides and attach it to the base in two places.

From popsicle sticks

Another idea is to make a box using popsicle sticks. In this case, you need about 30 of them. You will also need hot glue, a little corrugated cardboard, acrylic paints of two colors, scissors, a ruler, a pencil and satin ribbons.

It will look interesting if you paint 14 sticks one color and 15 another. From corrugated cardboard you need to cut 2 rectangular fragments with parameters 5.5 by 7 cm, 2 semicircular fragments with parameters 7 by 3 cm, then all these pieces must be painted.

To assemble the bottom you will need 7 sticks. Cardboard sides are glued to the bottom in a vertical position. The other two sides are lined up with 6 sticks each and attached to the sides of the cardboard sides. The semicircular fragments are connected to each other with 10 sticks, thus completing the lid. Tape is glued to the ends, and the lid is attached with two tapes.

What materials can the internal structure be made from?

It is advisable to arrange boxes for storing sewing accessories so that each item remains in its place during transportation. You can mount inside:

Glass baby food jars with lids. Great compartment for buttons.
Children's plastic or wooden pencil cases for stationery. This option is suitable for storing elastic bands, ribbons, and zippers.
If you form loops of rubber bands on a wooden board (they can be glued with a glue gun), then you can put scissors, rulers, crayons, and pencils into the holes.

All elements should be fixed by gluing to the bottom of the box. This way the organizer can be transported in any conditions without risk.

From shoe boxes

One of the easiest options to make a beautiful and useful box is to use a shoe box. To create a casket, just cover the box with fabric or colored paper.

If you need a smaller box, you can use a box of tea, milk, etc. as a basis.

In the case of a milk carton, it will be enough to tip it on its side, make a slot in the shape of the letter “C” on top and bend this piece of cardboard. This will be the lid. Then the box needs to be covered with a beautiful fabric, after which the lid and bottom should be covered with two satin ribbon ties.

Self-closing box

In addition to the box with a separate lid, resealable packaging also looks stylish. To create a box, the first thing to do is print and cut out the template.

Tip: These boxes look especially beautiful if the template is printed on colored cardboard. You can also use thick matte photo paper.

In addition, the template can be enlarged to the desired size yourself.

For especially large packages, it is worth dividing the template into several parts: bottom, sides.
In this case, it is necessary to cut, stepping back from the edge by 4-5 mm - this distance will be needed to glue the workpiece into a single whole.
At this stage you need to make slots for the closing valve. It is very important to do this with a sharp knife so that the edges of the slits are neat.
It is necessary to bend the workpiece along the dotted lines - they are marked on the template.
Tip: Before bending, use the back of the scissors to forcefully draw along the dotted lines. This will allow you to bend the workpiece without damaging it.
It is necessary to glue the workpiece. If the printout consists of parts, you should first connect them. Just as in the case of making any other packaging, the edges must be carefully coated with glue.

At this stage you can decorate the box. Especially if the template was printed on white cardboard or photo paper. Satin ribbons, lace or velvet braid look good as design elements. These materials will add a special shine to gift packaging.

From plywood

Another fairly simple way to create a casket at home is to make an object from plywood. The only difficulty that may arise in the first step is preparing the required size plywood bars.

If you take a lid and a bottom of 10x10 cm, then the sides should be 10x8 cm. The sides of the casket are glued together at an angle of 45 degrees. The sides are pre-cut properly. Then the bottom is glued. To secure the lid, you need to install hinges using self-tapping screws. It is very important to chamfer the hinges on one of the sides and on the lid of the box. The outer part of the resulting box is decorated based on the imagination of the master.

Crafts from candy containers

No less original and attractive will be a box modeled from an old cardboard box left over from sweets. Such containers can have a variety of shapes. There are square, round, oval, multifaceted and many other interesting variations of such boxes. From each copy you can make a chic box.

To make an attractive box from the above box, you will need:

the box itself;
multi-colored paper;
plain paper;
glue;
acrylic paint;
scissors.

Let's consider step by step how you can model an elegant box using these components.

First you need to prepare a candy box. It must be clean, without candy wrappers and chocolate chips.
The cleaned container will need to be very carefully covered with paper around the entire perimeter. The entire base should be completely designed in this way. At the same time, it is very important to leave a small supply of paper “finishing” at the edges.
In order to decorate the lid and bottom of such a box as neatly and aesthetically as possible, you will first need to glue the side areas. The corners must be carefully trimmed, and then also carefully bent inward. At all stages, paper must be taken with a small margin.
Using sheets of plain paper you will need to decorate the inner cavity of the future attractive box.
When the interior design is completed, the box must be put aside and not touched until it is completely dry.

“Candy” boxes make especially attractive and elegant boxes. Almost any type of container in question is suitable for carrying out such manufacturing work.

Very beautiful boxes are made from Raffaello candy boxes. After that, you can store a variety of things in them, for example, jewelry and hairpins for girls.

From matchboxes

When making a chest from matchboxes, the craftsman expects some minor work. The crafter will need 10 boxes, thick cardboard, glue and various things for decoration: beautiful photos and fabrics for pasting, artificial flowers. First of all, you need to cut out a square frame from cardboard. Then you need to glue the matchboxes together. Usually they are glued together in 2 or 5 boxes, but the quantity can be absolutely any. The boxes in this case will serve as retractable chest of drawers.

The resulting chest of drawers must be glued to the frame so that the cardboard inserts are on all sides. The next step is decorating the box. You can use nails, small hooks, and decorative stones as handles for drawers.

In conclusion, it is worth noting that there are many options for making and decorating caskets at home.

The article provided listed the basic materials at hand and step-by-step instructions with the necessary actions for gluing the boxes. In addition to the above materials, boxes can be made from bamboo napkins, vinyl wallpaper, salt dough, sewer pipe, etc. There are many options and it all depends on the means at hand and the skill of the craftsman. Also, boxes can have unusual shapes and be decorated as much as your imagination and creativity allow.

Main features of the special box

The device must be neat, safe and convenient. The size is determined by the number of tools, materials and placement of fixtures. A box for sewing supplies can be made from the following materials:

Plastic containers of various designs.
Small wicker baskets.
Cardboard boxes.
Metal boxes.
Wooden blanks.
Glass aquariums.

Each option has its own advantages and disadvantages, determined by practicality, strength, relevance, convenience and accessibility. The most common, reliable and cheapest base is a cardboard box.

Cardboard book box

A box in the shape of a book, which you can make yourself from cardboard, can become an excellent souvenir for a teacher, mother, grandmother and work colleague. Creating this craft does not take much time, and the result will definitely delight you.

Attention! The base of the box can be made either from thick cardboard or from the cover of an old book.

Storage box

In addition to packaging for gifts, self-made boxes are also suitable for storing things. They look especially impressive with jewelry.

Also convenient to use for storing lipstick, mascara, pencils and other cosmetics. Men can store watches or cufflinks in them.

What templates are suitable for making your own storage box?

In this case, a box in the shape of a rectangle or hexagon will look impressive. Making is available for needlewomen of any level of preparedness - from masters to those starting to take their first steps in creativity.
Storage boxes made of thick felt look interesting. You can decorate them with any available material that matches the overall style of the idea.
The versatility of the form allows you to experiment with styles: both shabby and steampunk will look equally impressive.

DIY boxes will always be the center of attention. They add soulfulness to gifts for dear and close people. With the help of designer packaging, you can enhance the surprise effect of a surprise for employees and colleagues. And storage boxes, made according to an individual sketch in any style, will complement the interior of apartments and houses.

Boxes made of cardboard and fabric

You can use fabric to steal absolutely any cardboard box. But if you don’t have time to create the base for such a product, you can use a juice box.

Creation option:

First, mark the future cover and then cut it along the contour on three sides.
The sections are covered with masking or paper tape.
Finally, decorate the product as desired. You can use bright fabric, guipure, tulle and satin ribbon.

Storing yarn and floss

Embroiderers and knitters treat even small pieces of yarn or floss with care. And such leftovers need to be stored wisely so that the threads do not get tangled and they can be easily found. One of the simple ways to save leftover threads is to wind them on a regular clothespin - the ends of the thread will be clamped in the jaws of the clothespin, they will not unravel, and the necessary remnant can be found immediately.

A broken nail is no problem: tips for treating nails at home

When toothpaste is harmful to children: permissible age doses

From athletes to Hollywood stars: men Naomi Campbell

You can also use transparent jars with screw caps to store small balls. The jars can be equipped with magnets and hung from the underside of the shelf above the desktop, where a magnetic or metal strip has been previously secured.

If you have a special place in the room for work, then on one of its walls you can make a panel organizer where skeins of yarn will be placed.

Multi-color knitting is difficult because the balls get tangled, the threads intertwine, and you have to unravel them all the time. You can make this knitting process easier by using ordinary containers in which you can make holes for threads. The balls need to be lowered into the container, pulling the tail through the hole, close the container with a lid - and you can safely knit.

Balls, skeins or skeins can be stored in an organizer with transparent pockets - this way they will be clearly visible, and the organizer itself, hung on the wall, will not get in the way.

I hope that you will use at least one of the proposed options for storing needlework threads, which will undoubtedly help you in your creativity.

Tips from needlewomen

Working with cardboard is not difficult if you follow some tips:

For cutting, it is better to use a special cardboard knife with a sharp end. If this is not available, then a regular or stationery one, but well sharpened, will do.
Before cutting parts, be sure to draw a contour according to the template, strictly observing the dimensions.
To bend thick cardboard, make a shallow cut along the fold line, using a ruler.
It is not recommended to use colored stationery paper for decoration; it is better to replace it with one intended for scrapbooking.
When gluing paper to a cardboard base, it is important that it is saturated with glue. Since applying a dry sheet will lead to the formation of bubbles. It should also be smoothed from the middle to the edges. The fabric is glued identically.

Box made from scotch tape

What can you make a jewelry box from? From completely different items that have the right texture and size! For example, from the remaining base from adhesive tape. The manufacturing process is very simple!

To work you will need:

bobbin as a base;
PVA glue;
scissors;
cardboard;
pencil;
Materials for decoration to choose from (fabric, felt, colored paper, napkins).

Instructions for making boxes:

First of all, you need to draw two round parts on thick cardboard that match the size of the base. We outline one of them with an additional outer circle, 2 cm larger in diameter. This is the bottom of the future box. We cut out both blanks.
We make cuts along a larger circle, without going beyond the line of the inner circle. This is necessary in order to bend the edges and glue the bottom to the base.
We fix the lid with a thick strip of cardboard and tape.
Next we move on to decoration. You can decorate with colored paper, fabric, felt, decoupage. There are many options! The result is a charming round box that you would not be ashamed to present as a gift to your mother, sister or friend.

Shabby chic style box

This master class is dedicated to making your own pincushion box in the shabby chic style. A small product turns out to be inexpressibly cozy and cute. This box can be made as a gift for your mother if she is interested in sewing.

Tools and materials

To make such a box you will need the following materials:

a box from Raffaello and a small piece of foam rubber 4-5 cm thick and 13 cm in diameter;
cotton fabric 20x20 cm, lace, decorative needles and scissors, hemp twine 1 m, chipboard or small frame;
paper and knitted flower buds, half beads, cotton lace braid, plastic or plaster moldings, a string of pearl beads and a sheet of paper 30x30 cm.

And:

scissors;
centimeter, ruler;
pencil, tailor's chalk;
heat gun, Moment glue, compass.

Step by step diagram

A strip of paper is cut to the size of the box and one edge is tinted with distress ink, and the other with a stamping pattern, and then glued to the base.
A circle suitable in diameter for the box is cut out of a piece of foam rubber, and scissors are used to give it the shape of a hat.
A circle with a diameter of 18-20 cm + an allowance of 1.5-2 cm is cut out of textiles.
Next comes the turn of the cardboard - a circle of the same diameter as the foam rubber is cut out of it.
Now the foam rubber is covered with fabric, trying to ensure that it lies flat and beautiful.
Carefully glue the finished pillow to the top of the box.
The borders are masked with a “pearl” thread, a lace bow, or a decorative droplet element.
The lace is placed around the perimeter of the package and tied with twine.
To decorate, cut out a suitable picture, apply a tone to the edges and glue it onto a piece of white cardboard, leaving 0.5-1 cm free edges.
The cardboard is cut with curly scissors, obtaining a fancy edge and also tinting it.
Since the lace and twine have added noticeable thickness, the upper and lower parts of the picture are fixed with double-sided tape (before gluing, the picture must be pressed tightly to the box and held, giving it the desired bend).
All that remains is to decorate the pincushion with the prepared elements, giving it a finished look.

Organizers for storing floss

Container for household items with supplies for needlework

The same container with floss

Advantages of storing floss in a container

In organizer-containers, floss threads are stored compactly, do not become disheveled and do not gather dust.
All thread numbers and colors are visible.
Bobbins with threads wound on them can be arranged in any order convenient for you.
Containers from DMS have an insert for keeping track of the threads in them. However, it is worth noting that needlewomen, as a rule, do not have enough time to use it constantly)

Sheet for recording floss in a container

Some needlewomen store data on the presence of threads on the computer, creating for this purpose files with special tables with a list of thread numbers they have by company.

How to arrange threads in a container

You can store threads in any order convenient for you, both in store-bought boxes and in home-made boxes and organizers.

By numbers or colors

Store threads separately by floss manufacturer, organizing them by number or color.

Until recently, Kirov floss was produced without numbers, so it makes more sense to store them by color

PNK threads in a container for household items

The bobbins fit the height of the cells and do not press or bend under the lid.

Closed container

Organizer with floss packed in ascending numbers

By thread composition

You can sort the floss according to the composition of the threads (cotton, metallized, silk, melange, etc.)

Organizer with silk and metallic threads

Threads for one large process

Larger containers can store materials for each individual large embroidery process or several smaller processes.

It is convenient to use an organizer box for the current process, placing in it not only the necessary floss, but also other necessary things: in one of the cells we put an improvised needle bed with additional needles and a thread take-up, in the other - scissors, colored pencils or markers for marks on the diagram, a magnet for quickly finding a suddenly lost needle and anything else you think is necessary.

Container organizer and special organizer from Pako for working needles with materials for one large process

And here is an organizer-container with materials for several small processes.

Please note: the thread columns for each individual process are signed!

Threads for a small process

Materials for each small process can also be stored in a separate, small container or in a homemade organizer box. This is also true for embroidery that you take with you on the road.

If all your organizers are labeled, you will be able to find the necessary strings very quickly. On the container boxes themselves, we do this using stickers on three sides (except for the back - with the lid attached): no matter which side you put the box for storage, you will always see the inscription with its contents.

Containers with the numbers of incoming threads indicated on stickers

Organizers are also stored compactly, conveniently and neatly on a shelf in a closet, chest of drawers or drawers.

How to decorate?

There are quite a few ways to decorate a box, and here, again, you need to focus on your capabilities. Simply painting will significantly improve the appearance of the glued base for the box. To do this, you need to perform several steps.

Tape the folds, joints and gluing seams with masking tape.
Apply primer to all external sides. For smooth cardboard you only need one layer. If there are irregularities, the primer will have to be applied several times after the previous layer has completely dried.
The dried primer should be sanded with sandpaper, and you can begin painting. A more uniform layer is obtained from a spray can, but you can use a regular brush.
There can also be several layers of paint - it must completely and evenly cover the base.

In addition to plain coloring, various techniques are used, including painting. An alternative method is to cover it with fabric or paper. On paper or fabric, you need to make a pattern with allowances - it will look like a drawing of a box. If you take fabric, it is better to apply glue both to it and to the base. After gluing, the canvas should be smoothed well to expel air.

Another way of decorating is decoupage, this way you can decorate a painted or glued box.

Select a suitable image from a decoupage card, napkin or any printed publication. You can use the entire picture of a suitable size or cut out the desired part. For multi-layer napkins, the top layer is separated.

The image is applied in the desired place and carefully covered with glue, while avoiding folds, tears and bubbles.

After drying, the surface can be modified - some details can be drawn more carefully, and the surrounding background can be filled in. Finally, a layer of varnish is applied.

Decorated boxes can be decorated with beads, rhinestones, ribbons, lace and even flower arrangements. Any natural material will do - shells, coffee beans, pebbles. There should not be too many decorations, two or three varieties are enough.

Bobbins for floss

Small but necessary helpers in organizing and storing floss are bobbins. It is on them that you need to rewind the threads for storage in container organizers.

Cardboard bobbins are significantly inferior in quality and durability to plastic ones, so they are best used for infrequent use, or as a one-time use for one separate embroidery process, or for storing leftover threads on them.

One bobbin is intended for one standard (8 m) skein of floss. A bobbin with thread from two skeins will take up more space in the organizer and is not so convenient to use: when pulling it out of the box or, conversely, placing it in a container, the “extra” threads cling to adjacent bobbins and slide off.

Plastic bobbins with thread from two skeins (8 m DMS floss and 20 m PNK floss)

From the video from Lelya Lee you will learn how to make exclusive bobbins in the form of pinkies with your own hands.

Oksana Dereza in her video gives a detailed comparison and review of organizers-containers and bobbins for floss from different manufacturers, indicating their advantages and disadvantages.

Device for winding floss onto bobbins

A bobbin thread winder is a great addition to your craft accessories. Using this device, threads are wound onto bobbins easily, quickly and accurately. These special devices are produced by different manufacturers and are relatively inexpensive, and their help is quite significant, including in the form of significant savings in precious time spent on rewinding threads from a skein.

Device for rewinding floss onto bobbins

The floss rewinder is easy to use, but let’s take a closer look at some of its operating points.

It is most convenient to mount the device on the side wall of a free cell of a container for storing floss.

The gap between the wall of the box and the device is somewhat large, so for the stability of the winder it is necessary to fill the space, for example, with a piece of cardboard, paper folded in several layers, or by placing three cardboard bobbins for floss there.

Having prepared the winder in this way, we insert a bobbin into a special hole, having previously pasted on it or signed by hand the number of the thread that we will wind, secure the bobbin with a pin, fasten the beginning of the thread in special slots on the bobbin and with pleasure, easily and quickly, rewind the threads from the skein onto the bobbin, we also fasten the end of the thread into the slot.

It happens that when winding quickly, the pin falls out of the hole, so it is recommended to initially insert it all the way and press it harder with your finger, as if securing it in place.

When winding floss onto a bobbin, it is more convenient if the skein of thread hangs from the table, unwinding under its own weight, guide the thread by hand and, if necessary, straighten the paste.

We do not pull the thread onto the bobbin tightly to avoid strong creases, although during the embroidery process with threads stored wound on bobbins, all creases on the floss are smoothed out.

If you want to show your imagination and immerse yourself in creativity, you can make a similar universal device with your own hands and an interesting video from Dunyasha Cross-stitch will help you with this.

https://youtube.com/watch?v=-4nTjZb1fVg

Stickers with thread numbers

Indicating the floss number is fundamentally important for proper storage and use. Everything here is extremely simple: some people prefer to use special branded stickers, others sign by hand, while others find it more convenient to use numbers from the skein labels cut out and glued to the reels.

One working moment on branded stickers. VHI in sets with such stickers, in addition to the square stickers with the indicated floss numbers, has blank sticker squares.

Stickers with numbers and blank squares

What are the blank sticker squares used for? You can write the numbers you need on them yourself!

Other ideas

Of course, the methods of modeling creative boxes do not end at the master classes listed above. A lot of attractive and functional products can be made from matchboxes, from tea leaves, and also from leftover cigar boxes. It is the latter basis that we will talk about below.

If you plan to make an elegant box from a cigar box, then you will need to prepare not only the box itself, but also other components, namely:

fabric (corduroy or velvet work best);
foam rubber with a thickness of 1.25 cm;
thin cardboard sheets;
stationery knife with sharp blades;
scissors;
ruler;
hot glue gun.

Let's take a look at step-by-step instructions on how to create an impressive cigar box yourself.

You will need to cut out a rectangular piece from thin cardboard, which will be 3 mm smaller than the bottom of the base box. Use a pencil to mark where the foam pad will end. At this point the cardboard needs to be cut.
Next, take a cardboard base for a soft pad. It is lined.
Then take a piece of foam rubber, the width of which corresponds to the size of the cardboard part, but the length should be twice as long. The piece should also be lined into strips 5 cm wide. Next, you need to cut the part along these lines.
At the next stage you will need to take the adhesive composition. It will need to be applied in moderate quantities to one of the areas on the cardboard. A foam piece should be glued there, having first folded it in half lengthwise. In the same way, you will need to glue all the remaining pieces of soft material.
Now you need to take a woven piece. Its width should correspond to the size of the resulting base, but the length should be much greater.
One end of the woven piece will need to be carefully glued to the back of the cardboard base. The material is wrapped, and then they are engaged in pasting the foam pads. The fabric will need to be inserted into the gaps that are present between these soft parts.
You will need to wrap the cardboard again with the remains of the woven piece and then glue it.
At the next stage, you will need cardboard, the width of which is 1 cm greater than the height of the resulting pad. It will need to be carefully folded, making an indent of 1 cm from the edge. Make sure that the bent cardboard covers the foam parts.
You will need to take a couple more woven pieces. They should be 2.5 cm larger than the cardboard base of the structure itself. Be sure to carefully cut off the existing corners. After this, the resulting blanks will need to be pasted over the cardboard bases. The finished walls of the box should be securely but carefully glued to the side bases of the pad.
The sheet of cardboard that you planned to attach to the remaining section of the bottom of the box should also be carefully covered with the same fabric as all the other parts. The remaining elements are attached to the bottom of the box. The original craft is ready!

From several matchboxes it is possible to make a very original and creative box, which is a miniature chest of drawers with several drawers. In this design you can store a lot of small things.
To make a mini-chest of drawers at home, you need to securely glue several matchboxes together. You should also prepare a cardboard base frame. It is necessary to glue the boxes to it in such a way that the “drawers” of the structure can move freely.
You can arrange matchboxes in such boxes in different ways. Here you can resort to a design approach. At the last stage, the creative homemade product will need to be effectively decorated and decorated.
Design using decoupage techniques, pasting with colored paper, and attaching miniature accessories in the form of beads, buttons and other similar details are suitable. The design of the finished product can be absolutely anything.

Step-by-step instructions for beginners

Operating procedure:

First you need to draw out the detail of the future box on a sheet of paper or cardboard.
Usually, the bottom of the future box is drawn, and then, on each side, the walls of the future box are added to it.
After this, the sheet is folded along the drawn lines.
As a result of this manipulation, squares are formed in the corners of the sheet.
Then, one side of each square will need to be cut, so these squares cut off on one side will become valves.
Using glue, these valves must be fixed to the wall of the box from which the valve was cut.
If necessary, the lid is made in the same way.

There are also many other ways in which you can make a craft like a box.

As you can see, boxes can have lids, or they can be made without lids. If necessary, the box can be decorated by any available means, for example, using paints, or using appliqué made from crumpled paper or other material.

Pyramid gift box

What do you need

Scissors;
thick paper;
ruler;
pencil;
plate or disk;
hole puncher;
yarn or ribbon.

How to do

Cut out a square from paper. Using four lines, divide it into nine parts. Make a mark in the center of each side of the large square. Inside the squares adjacent to the marks, draw triangles as shown in the video.

Place a plate or disk on the sides of the triangle and trace. Cut out the shape along the marked lines. You should end up with something like a flower.

Bend the figure along all straight lines and connect the pyramid. Make holes in the tops of the triangles, thread yarn or ribbon through and tie.

Such a pyramid can also be made using the origami technique: