Methods for repairing an air mattress at home

Share on social media networks:

Today there are many different mattresses on sale, ranging from quite expensive water or air mattresses to more budget options in which furniture foam rubber or cotton wool plays the role of filler. An incorrectly selected mattress can cause many problems with the musculoskeletal system, therefore, when choosing this product, it is necessary to take into account all the nuances.

By making your own mattress, you will get great benefits. The materials needed for these purposes are definitely cheaper than a purchased factory product, and there will be no additional costs. The only caveat is that you will have to spend this time, but the result is worth it. The experience gained will provide an opportunity not only to quickly understand the features of making a mattress for a bed, but also to share the experience with your friends in the future.

How to find a hole in a mattress

The first step to solving the problem of a torn mattress is to look for punctures. They may be too small to be detected by normal deflation. To do this, there are several proven methods that help save the situation in time.

Note!

A special pump for inflating the mattress is always supplied with each inflatable product.

It will be useful when searching for a hole, so if the pump is missing, you need to purchase it.

If, when constantly sleeping on the product, it seems to the owner that the mattress is leaking air, but no obvious holes are visible, it is worth checking the valve of the model.

Perhaps this element does not completely cover the air outlet hole or a tear has occurred. If there are no problems with the valve, you should find the hole.

Let's look at several methods to determine a puncture:

It is worth noting that a high-quality branded mattress is less susceptible to punctures than its affordable Chinese counterpart. Therefore, when purchasing, consider the service life of the product.

Finding the location of the damage

In some cases, finding the damaged area can be very difficult, especially when it comes to a flock surface. If you are lucky enough to immediately find the hole that has formed, you need to circle it with a bright marker or felt-tip pen so that you can then know where to glue the patch .

Effective methods

To find defects, it is better to use methods that have been proven over the years:

1. 
   Lather. The location of the damage will be accurately indicated by the foam that needs to be applied to the inflated mattress. In the place where the air comes out, the foam will begin to bubble actively. To detect all existing defects in the product, you need to dissolve a larger amount of liquid soap in water and use a sponge to cover the entire mattress with this solution. If the location of the damage is approximately known, then you can use shaving foam.

2. Immersion of the mattress in water. The easiest and most effective way to find the hole is to immerse the inflatable product in water. Air bubbles floating to the surface will indicate the puncture site. The main inconvenience is that the size of the mattress does not allow this procedure to be carried out in a bathtub or basin. It is best to use a pool or a nearby body of water for these purposes. When the place where the air is escaping is found, the mattress must be dried. Only in this case can a patch be applied.
3. Liquid filling. You need to pour a small amount of water into the mattress. When you press on it in different places, you will see how the liquid flows out through the existing holes. And if you add a soap solution to the water, it will foam and make the leak more noticeable.
4. The sound of air escaping. The air that comes out of a narrow hole under pressure produces a characteristic hissing sound. If you listen carefully in a quiet environment, then you can understand which part of the mattress this sound is coming from. To accurately determine the location of the puncture, you need to bring your palm to the most suspicious place and feel a thin stream of air.

What can I use to seal the hole?

If the product does not include a special repair kit, the rubber mattress can be sealed with other materials.

Main replacement options:

1. PVC glue
   . The classic moment is suitable as it; after drying, it forms a film similar to rubber.
2. Rubber
   . For this, use the patches from the bicycle tire repair kit. In addition, you can use a piece of ordinary thin rubber, taking the dimensions of the patch with a margin.

   After repair, you need to check whether the mattress deflates by pumping it up.

An important problem is the repair of internal partitions of the product.

With such damage, a bump forms on the surface, making it difficult to sleep comfortably.

Useful video

Related Posts

Inflate the mattress, remove all sources of noise and listen carefully. Damage in the mattress can be indicated by a slight whistling sound. To be sure, the noisy part can be immersed in water: small bubbles will indicate the location of the puncture.

If the previous method did not help, it’s time to feel like a real barber. In a container, whisk water with detergent and apply thick soap suds to the surface of the mattress with a brush. Foam will begin to bubble at the puncture sites.

Once you have found the damage, trace it with a pen or chalk so you don't lose it.

Mattress recycling technologies

Mattresses usually consist of the following elements: fabric shell, filler. The filling can be polyurethane foam, coconut coir, latex, or cotton. In addition, the insides of the mattress may consist of metal springs. Mattress recycling is difficult to automate, so it is done manually:

• the product is divided into components: the fabric shell is removed, the springs or filler are separated;
• separated elements are sorted;
• The collected raw materials are sent separately for processing.

Metal springs are melted down to produce the same products as in primary production. The remaining components (fabric, fillers) are used as additives for the production of other products: for example, new fillers.

Did you like the article?

Click on the star =)

Average rating 4.1 / 5. Votes: 8

Be the first! No votes yet.

We are very sorry that you did not like the article! Help us improve content! Please tell me how we can improve it?

How to seal an air mattress

How to seal a hole in a mattress? Suitable glue for PVC, universal “Moment” or polyurethane shoe glue.

How to do it? We already have a mattress ready for repair and a grease-free patch cut to size. Now apply an even layer of glue to the mattress and patch, wait 5 minutes for the glue to set a little, and align them. For greater effect, you can put a load on the gluing site for a day.

What to do if you need to seal a mattress along the seams

If the mattress is torn at the seam, a patch placed on the outside may not help. In this case, it makes sense to seal the mattress from the inside. To do this, use your hands or a ruler to pull the damaged area through the valve hole. Then glue the patch (following the instructions from the previous paragraph) to the inside of the mattress. You can turn the mattress out and use it as usual within 24 hours after the glue has completely dried.

Main part of the mattress

The basis of the mattress is a structure that consists of:

• two layers of polyurethane;
• two layers of felt;
• spring base located between them.

Manufacturing principle:

• After cutting the felt and foam rubber, first lay a foam layer on any horizontal surface, then a layer of felt, a spring base, again a felt layer, and cover this “pie” with another layer of foam rubber.

Important! Felt is used here to prevent the springs from damaging the surface of the polyurethane under load.

• The free space on the sides must be covered with inserts made of the same foam rubber, the result should be a closed box.
• To glue the individual elements of this box, it is better to use special glue. You can get by with “liquid nails” or ordinary PVA. But in this case, the drying time of the glue will increase, and a hard crust will appear at the gluing site, which will simply crack when deformed.

Important! To create additional strength, you can place a board on the foam rubber during the gluing process, and place a load on it.

How to avoid new damage

To ensure that your repaired air mattress makes you happy for as long as possible, follow these simple rules.

• Before placing the mattress on the floor, grass or sand, inspect the surface for sharp objects.
• Do not play on the mattress with pets: they may puncture it with their claws or teeth.
• Do not drag the mattress across the floor if people are lying on it: the seams may come apart.

An air mattress is a comfortable thing, but fragile. One morning you or your guests risk waking up on the floor - the mattress has been punctured and deflated. Of course, it is better to contact specialists. But the prices for their services are steep. Maybe it’s easier to just buy a new one? Or will we still try to fix it ourselves? It is not difficult to seal it, but you need to know how to find and how to seal an air mattress at home, what glue is suitable for these purposes and what to make a patch from.

It would seem that such a device has a lot of advantages: there is somewhere to put guests, it will allow you to sleep in comfort while on a hike, and swimming on it is a pleasure. And most importantly, when deflated it takes up very little space. But it is also easy to damage it without even noticing it. It is enough to inflate the mattress too much, place it in the sun or on the ground in the forest where dry grass sticks out. And if a pet takes a fancy to it, a puncture is definitely inevitable. Is the anti-decubitus mattress deflating? How to find a hole? How to seal a hole in an air mattress quickly, efficiently and without extra costs?

Disposal methods

Nowadays, there are many companies that offer high-quality services for the removal of bulky waste for the purpose of their further recycling. This option is environmentally friendly and helps save your own time and effort.

Expert opinion Alexander Yu. When thinking about environmental issues, it is important not only to sort, but also to reduce consumption. Ask an expert a question Some stores with identical products offer additional services. For example, a 2-bed mattress is purchased and the old one is handed over to them for recycling. This allows you to get rid of unnecessary things in the most rational way.

Program from Askona

This is a large factory that produces anatomical mattresses. In addition to products for healthy sleep (beds, pillows, blankets, etc.), it also offers an interesting program for their recycling. This approach helps protect the ecological state of the planet from deterioration.

The features of the promotion are as follows. The owner does not need to think about how to throw away the old mattress; he simply takes it to the company for recycling. In return, she provides him with bonuses when purchasing new products.

The program applies to the official online store and all branded retail outlets. The discount can range from 10 to 20%. But this additional service does not apply to products from other companies, that is, only owners of Ascona products can use the program.

Removal companies

Nowadays, there are a considerable number of companies and organizations that offer such services. Websites of the most popular companies, in addition to:

• . When purchasing a new product, the old mattress is taken away for recycling or taken to a specialized container. The free service applies to single and double models in Moscow (within the Big Ring) and nearby cities in the Moscow region.
• . They have a temporary promotion that applies to the entire line of new Orthomax mattresses. When purchasing in store, employees will pick up old items for recycling free of charge.

There are also other businesses that remove used mattresses. The cost of the service depends on the weight of the product and brand. Examples of prices in rubles:

Read also: Driver hand signals

• "Ascona" - 150;
• “Virtuoso” - 350;
• "Ormatek" - 300;
• Beautyson - 1,000.

The price must be clarified with representatives of organizations for recycling old products.

Sell ​​or give away

Sometimes used items can be useful to other people. It’s worth trying to give away what you don’t need for free or sell it with the condition of pickup on Yula, Avito and other identical sites. This method can be implemented if the mattress is in good condition, without serious defects.

In most cases, used items are used for handmade products: pillows for pets, toys, home decoration and much more.

Using old mattresses, it is possible to insulate rooms that are used by non-governmental centers to help people who find themselves in difficult situations. Thus, you can do a good deed and at the same time get rid of an unnecessary product.

Take to the dacha

Owners of country houses, cottages and country houses do not have to throw away the old mattress. It can really be cleaned by dry cleaning and used for different purposes. For example, as:

How to look for a hole

How to find a hole in an air bed or mattress? First you need to find the hole in the air mattress. It is difficult to do this with the naked eye. Especially when it's in a deflated state. Inflate the product until it rings and check the most common areas of damage.

• Bottom. Here, any hard object on the surface where we place the mattress can make a hole: a stone, dry grass, a nail head on the floor.
• Upper side. Here we can pierce the mattress with clothing accessories, a hair clip or an earring. Pet claws are also a common cause.
• Seams. Mattresses tear at the seams because they are inflated too much, from sudden landings or children's games with jumping.
• Valve. Dust, hair and other debris may get into the mechanism. The tightness is broken and the valve begins to leak air.
• Connections with partitions. The reason why they tear is an increase in pressure inside the mattress and an uneven load on the surface. And this happens again when the product is heavily inflated or suddenly flopped with all its weight. This “sore” is especially common in models with partition-cup holders.
• Folds. When a mattress is stored folded for a long time, it is at the bend that the material loses its elasticity and a hole may subsequently appear.

Carefully inspect every millimeter of the surface. If there are relatively large damages, you will easily detect them. To find small punctures, there are the following methods.

Aurally

1. Inflate the mattress tightly.
2. Make it as quiet as possible.
3. Bring your ear close to the surface and listen. A slight hiss will indicate the puncture site.
4. Examine the entire area of ​​the mattress in this way.
5. Listen to the valve separately; it can also “poison” air.

You can “feel” the device not only by hearing. Bring your cheek or lips to the mattress and feel a stream of air from the hole, if there is one. Or you can wet your hand up to the elbow and move it close to the surface.

Using water

1. Inflate the mattress.
2. Place it under water. Air bubbles will come out of the cut.
3. Inspect the product from all sides.

In the absence of open water, you can try to lower the product into a regular bath. But practice shows that even a single mattress does not fit completely into it. And if you immerse it in parts, the middle will still remain untested.

Soapy solution

1. Inflate the product.
2. Lather the solution with a sponge.
3. Apply foam to the area to be examined. If there is a hole, bubbles will blow out of it.
4. Treat the entire surface this way.

For the foam solution, you can use shampoo, liquid soap or dishwashing detergent. But not washing powder - coarse particles will scratch the surface and cause new holes to appear.

Shaving foam

1. Inflate the mattress tightly.
2. Pour shaving foam under the valve.
3. Bubbles will appear in areas of damage.

Starch

1. Inflate the mattress tightly.
2. Sprinkle the surface with starch. A “cloud” will appear at the puncture site.
3. Treat the entire area in this manner.
4. Vacuum the mattress.

This method allows you to find a puncture without water, which reduces repair time, because the mattress does not need to be dried. Instead of starch, you can powder the product with flour, baby powder or any other “flying” powder.

Cling film

1. Inflate the mattress.
2. Moisten the surface with a spray bottle.
3. Cover the area with cling film.
4. At puncture sites, air will accumulate under the film.

Keep in mind that there can be many holes. And in order not to lose the puncture site, immediately mark it with a pen, pencil or felt-tip pen.

Disposal options

We bought a new mattress and need to throw out the old one. How to do this correctly?

Why you can't throw your mattress in the trash

A garbage dump or a landfill are the first options for getting rid of an old mattress that you think about, but they are completely wrong. Thick cotton products can catch fire and the fire can spread further. When burned, toxic substances are formed that pollute the atmosphere.

Important! The product does not naturally decompose for a long time and releases dirt into the environment.

In a container for bulky waste

All garbage is thrown into a container; it seems that this can be done with a mattress, but it simply does not fit there due to its dimensions. Mattresses are classified as bulky waste, for which there are special large containers in designated areas. If you still leave the mattress near a regular container, you can get a fine for it.

Take it for recycling yourself or with the help of recycling specialists

There are companies that process large items. They process them and remove them for a fee. You can find out the price by calling the organization. They will tell you what form the mattress should be in.

They may not accept heavy and dusty, torn and gutted items, in which case you need to look for another disposal option.

Wet and dirty products are not accepted - they need to be dried and cleaned. You need to find out in advance how the company disposes of the product. Sometimes unscrupulous organizations take them and leave them at the nearest site.

If the mattress is rolled up, it can be taken in a passenger car and recycled. A spring mattress will not fit there, so it is better to call specialists with a machine.

Agreement with RO on removal for an additional fee

An inspection of neighboring houses showed that there was no container nearby for collecting bulky waste. What to do?

It is not possible to remove it; no companies involved in recycling have been found, so you need to negotiate with a regional waste removal operator.

You will have to pay for this, but you will be assured that the mattress will be collected and disposed of correctly. The regional operator has the necessary licenses for this.

As a gift with pickup

If replacing the mattress is not related to its poor condition, then there will be people who want to take it away. Such advertisements can be found in newspapers and on the Internet. People are ready to receive the things they need as gifts and take them away.

An old mattress may be of interest to creative people who will use its components to create original things: organizers, flower stands, interior items, toys, pillows for pets and more.

Transfer to human assistance centers

Organizations that help the homeless and people in difficult situations create temporary places of stay or overnight shelter for them. Usually there is not enough money, so they will take products of proper quality.

What you will need

It’s good if you still have the “original” repair kit that comes with the mattress. No? You'll have to use improvised means. To properly repair an air mattress, you need to choose the right glue and patch material.

Glue

It is better to use one of the polyurethane adhesives, they are specially designed for PVC surfaces:

• "Moment Crystal";
• "Uran" for rubber boats;
• shoe glue, for example, Desmokol;
• any glue for rubber;
• glue from Intex (a company that produces inflatable pools, boats, mattresses and furniture).

If you use an air mattress for swimming, then it is better to seal it with “original” glue or a compound for rubber boats.

Patch material

What material is better to seal an air mattress with? Suitable:

• rubber from a tire repair kit;
• old tire;
• inflatable toy;
• rubber swimming cap;
• unusable air mattress.

Cut the patch in a round shape, that is, without sharp corners. The size should be such that the edges of the patch extend beyond the damage by 2-3 cm on each side. The larger it is, the stronger it will hold.

Removal companies

Where can I recycle my old mattress? Nowadays, various companies offer removal services for old products. Their prices are approximately the same. You need to find out the requirements for removal: dimensions, condition, number of floors of the house, availability of an elevator, etc. In some cities, this type of work can be provided by individual companies free of charge under certain circumstances: for example, delivery of a new mattress and removal of an old one if its dimensions do not exceed the new one.

How to prepare surfaces

Before starting work, you need to deflate and thoroughly dry the product if you used water when searching for punctures. Then you need to properly prepare the damage site and the patch. The type of surface matters here.

To seal an air mattress on the smooth side, you need to degrease the rubber surface and patch with acetone, gasoline, white spirit or alcohol. Nail polish remover will also work. Then you need to clean the parts with fine-grained sandpaper, preferably zero sandpaper. This is done to make the grip as strong as possible.

To properly seal the velor side of an air mattress, you need to remove the fleecy covering. This is easy to do: wipe the area with a cotton pad soaked in acetone or alcohol, and after drying, remove the lint with the blunt side of a knife or, for example, a screwdriver. But you need to act carefully so as not to make new holes. Then the surfaces to be glued are degreased and sanded with zero sandpaper.

Danger of throwing in the trash and burning

Placing a mattress in or near a dumpster may cause problems with trash removal because garbage trucks are not designed to handle large items. Mattresses must be disposed of in bulky waste bins if they are located near your home. If there are no bunkers, order removal or remove it yourself.

There are fines for unauthorized disposal of bulky waste, even in the absence of designated disposal areas. Individuals are punished with 1-2 thousand rubles, and the maximum fine for organizations is 100 thousand.

One of the reasons for the danger of disposing of mattresses with household waste is increased flammability. The fabric shell and internal fillers are often made from substances that release harmful toxic substances when burned. For the same reason, it is unacceptable to burn an old mattress yourself.

Ways to seal an air mattress with a repair kit...

Typically, mattresses are supplied with a repair kit from the manufacturer. It includes special glue, vinyl for patches and brief instructions for use. On average, there is enough material for two or three holes. If the patch is finished, but the glue remains, do not throw it away, because it can be stored for about two years and will probably still be useful.

And the instructions for use require four steps.

1. A thin layer of glue should be applied to the previously prepared surfaces of the mattress and patches.
2. Combine the details.
3. Press firmly. 20-30 seconds is enough.
4. Keep under pressure for at least four to five hours.

Precautions when filling a mattress with air

Any inflatable mattress requires careful treatment and proper care. Before inflating a mattress or any other product, you should check the material for visible damage or defects. The integrity can be damaged by children, animals, sharp and hot objects. You should not press with your elbow or knee on the inflated frame. The frames must be inflated and deflated carefully, without haste. It is preferable to use native (branded) pumps, but you can use a vacuum cleaner and other improvised means. What you shouldn’t do is try to inflate a large product yourself. The following types of devices can be used:

• foot;
• manual;
• electric.

...and other means

And you can do without a repair kit. Once you have identified the hole, found the appropriate glue and patch, and prepared the surfaces, you can begin the repair.

On the tube of any glue it is written how to use it correctly. If you do not have the opportunity to read the instructions, for example, the tube is very wrinkled or the paint has worn off in places, then the following table will help you figure it out.

Table - Instructions for using different types of glue

Be careful: any polyurethane adhesive contains aggressive substances. Work in a well-ventilated area and wear rubber gloves.

If the seam comes apart

Peculiarities. A patch placed at the junction of the top of the mattress and the bottom may turn out to be unreliable even if all gluing rules are followed. Here you will have to get smart and pull the puncture site out through the valve.

What you will need:

• PVC glue;
• patch.

Your actions

1. Unscrew the valve.
2. Draw the damaged area into the valve hole using, for example, a thick marker or a plastic ruler.
3. Degrease and clean both surfaces.
4. Then proceed according to the instructions for using the glue.

The advantage of this method is that the patch is additionally pressed from the inside with air, which greatly increases the reliability of gluing.

Method without glue

Peculiarities. If you don't have the right materials on hand, there is a way to repair a mattress without glue or patches at all.

What you will need:

• iron;
• paper;
• smooth wooden surface.

Your actions

1. Pull out the damaged area through the valve hole.
2. Clean from dirt and dust.
3. Align the edges of the tear and place on a wooden backing.
4. Cover the soldering area with paper.
5. Iron with a heated iron.
6. Wait until the paper and the gluing area have cooled down.
7. Carefully remove the paper.
8. Screw on the valve.

This method allows you to deal with a tear in literally five minutes, but here it is important to use the iron carefully, without touching entire areas. Otherwise, you can burn the mattress in new places.

Superglue method

Peculiarities. This method is the simplest and fastest of those proposed. But you need to understand that superglue results in a fragile connection, like thin glass. This composition is non-waterproof and inelastic. That is, it can burst at any moment. But as an emergency measure, for example, on a hike, it is quite suitable.

What you will need:

• Super glue;
• paper tape.

Your actions

1. Inflate the mattress.
2. Dry.
3. Clean and degrease the damaged surface.
4. Apply a small amount of superglue.
5. Apply a patch of electrical tape of the required size.
6. Quickly rub the edges and press the patch firmly.
7. Let the glue dry.
8. The product is ready for use.

If there is no electrical tape, then you can do without it. In this case, you need to deflate the mattress and drop one or two drops of superglue onto the puncture (but no more) and let the composition dry. This method is suitable for minor damage such as pet claw marks or dry grass.

Method with “Liquid Patch”

Peculiarities. There is another method to quickly and easily fix an air mattress without a patch. For it you will need a composition called “Liquid Patch”. The glue comes in many colors, there is even a shade called Intex. That is, designed specifically for inflatable products of this manufacturer. Holes up to 3 cm do not require additional fastening methods. And cuts above this size will need to be sewn with regular thread.

What you need:

• tube of Liquid Latka.

Your actions

1. Spread the damaged area on a flat surface.
2. Clean from dust and dirt.
3. Thoroughly degrease the surface with alcohol or solvent.
4. Shake the tube of glue vigorously.
5. Apply to the damage, extending 2-3 cm beyond the edges.
6. Leave for seven to ten minutes.
7. Apply a second layer of Liquid Patch.
8. The product can be inflated within a day.

Liquid Patch bonding is as strong as an undamaged surface. Once you spend on this product, you will provide your mattress with many years of life.

If the valve leaks

Peculiarities. The culprit of a “leak” is not always a rubber sheet or a torn seam. Pressure may drop due to a leaky valve. But this trouble can also be eliminated with your own hands.

What you will need:

• fine-grained sandpaper;
• lubricant

Your actions

1. Unscrew the valve.
2. Clean the grooves from dust and debris.
3. Remove the rubber gasket.
4. Clean the valve end and gasket with sandpaper.
5. Lubricate the valve.
6. Screw the structure into place.
7. Inflate the mattress.
8. Apply soap solution to the valve.
9. If no bubbles appear, the mattress is ready for use.

If after all the manipulations the valve continues to let air through, it means that the failure is more extensive and the part needs to be replaced completely. Contact a specialist store for a new valve.

Preparation of the drawing

Frame chairs consist of many parts that must match in size and shape for the product to work without problems.
Be sure to make a drawing on paper, which indicates the configuration of the elements and other information:

• width, seats, backs, height and length of these elements;
• total length of the mattress when unfolded;
• shape of the sidewalls, dimensions of the armrests;
• dimensions of the frame, dimensions according to which the bars are cut;
• dimensions of plywood for the bottom and thickness of the filler;
• shape and height of the legs.

The product should have a streamlined shape for convenience.

How to avoid new damage

After successfully repairing a mattress, it is important to take into account past mistakes and prevent new punctures and cuts from appearing. And to do this you need to follow simple operating rules.

• Watch where you put the mattress. Remove all debris, sharp objects, and stones. If necessary, place a thick cloth, blanket or blanket under the mattress.
• Do not inflate the mattress too tightly. In the “ready” state it should remain soft and pliable.
• Keep pets away from the product. Even by simply jumping onto the mattress, animals can puncture the surface with their claws.
• Do not move the inflated mattress. Especially if someone is already lying on it. This is how partitions and seams are torn.
• Do not sit up suddenly or jump on the mattress. These actions can also lead to rupture of seams and joints of partitions.
• Lower the product slowly. Allow the mattress to deflate on its own; excessive pressure can tear the partitions.
• Wash the product with a mild soap solution. The less aggressive “chemistry” you use, the longer the mattress material will retain its elasticity.
• Before folding the device, dry it. Remaining moisture contributes to the growth of mold and cracking of the product material.

So, is your air mattress or circle deflating? Conclusion: it is quite possible to repair an air mattress or circle with your own hands. But if the above methods did not help or the damage exceeds 3-5 cm in size, it is better to contact a specialist: service centers may be located in stores specializing in the sale of goods for the home and leisure. Perhaps they can even help in a shoe workshop.

We think you are familiar with the situation when you stayed overnight with friends on an air mattress, and by the morning you discovered that you were lying practically on the floor. Despite all the convenience, efficiency and functionality of such beds, you will have to wonder more than once about how to seal an air mattress: no matter how rarely and carefully you use it, over time it will no longer hold air as well as at first after the purchase. Find out how you can identify the culprit of the leak and exactly how to resolve such a problematic situation.

Mattress recycling process

Recycling specialists take mattresses, furniture and other household items to special warehouses where they are reused:

• the inside is used for the production of other goods - soft toys, insulation materials, etc.;
• metal parts are sent for melting;
• plastic is sorted separately and recycled;
• polyurethane is used to make polyconcrete that insulates residential buildings;
• wooden parts are processed into cardboard fruit boxes.

Metal parts will be melted down

Which ones are unsuitable even for recyclable materials?

There are services that recycle household items. Their services can be used in almost every region of the country. But no matter how much you want to give your mattress a second chance, not all of them can be recycled. Signs of unsuitability for recycling:

• signs of tissue rotting, accompanied by persistent unpleasant odors;
• mattresses with significant damage, torn;
• non-standard item sizes;
• products with cotton filler.

Mold on the mattress

Rule out valve malfunction

Before scolding your children or your cat for making holes, make sure that the mattress is deflating for no other reason, and this could very well be a malfunction of the valve. Perhaps it is not necessary to seal the mattress and you can limit yourself to repairing this part.

Lie down on an air bed, put your hand to the valve and listen: if you feel or hear air escaping in this place, then restoring the valve's tightness will help you solve the problem of waking up on the floor. First, try removing the valve, cleaning it from dust and putting it back: debris accumulated in the grooves may well be the cause of the problem. But this method will only work if the valve is not damaged and does not have cracks in the pump hole. In this case, it will not be possible to repair the part at home: you will have to buy and replace the valve with a new one. Also, the cause of the leak may be an incorrectly installed or simply loosely latched valve, and since these options are easiest to determine by eye, try to eliminate them first.

To ensure that the valve remains in its original form for a long time, do not screw the pump too tightly when inflating the mattress.

What can be done from an old mattress

By recycling an old product, useful components are obtained that are suitable for reuse. Most often, it is disassembled by hand into parts, which are then sorted:

• foam rubber, felt, cotton are suitable for carpet linings and soft toys;
• steel springs are melted down and made into new parts;
• latex is useful for covering furniture;
• wooden elements look beautiful in the decor.

In addition, wood is used for shavings, sawdust or burned as fuel; plastic elements can serve as a source for producing granules and polymer chips.

Use in the countryside

Usually, useless things are taken to a summer cottage, where they can be used further. Before transportation, it is better to dry clean the product to remove accumulated dirt and possible insects.

Application possibilities are limited by the owner's imagination. Various photos are published on the Internet, or take the following ideas as a sample:

• warm bedding in a barn or doghouse;
• insulation in the chicken coop;
• scarecrow in the garden;
• swing pads;
• cushions for benches or wooden chairs;
• homemade large swing bed;
• sun lounger outside;
• extra bed.

Do not use for children's games

A mattress left unattended and not removed on time attracts children. They try to find a use for it in their games, which should alarm adults.

Jumping on springs is not a simple prank - very often they end in serious injuries: a fracture, bruise or a serious cut. The internal contents of the product may ignite and lead to a fire or poisoning of others.

Donate to an animal shelter

If you don’t have a dacha, you can give it to animal shelters - they will be glad to receive such help. An old cotton mattress will be a good bedding for cats and dogs, protecting them from the cold; it can be chewed or torn. This is usually what animal lovers do.

Sell ​​or give away for free with pickup

Where to put an old mattress if it still looks decent? Try to implement it for a nominal fee. You need to place information on special services and indicate a low price.

Sometimes they are taken by construction crews involved in insulating various premises. Creative people who will be satisfied with the indicated symbolic price may be interested in it.

Take advantage of the recycling program from furniture stores

Sellers strive to attract buyers, so they develop various promotions for recycling products - “replace an old mattress with a new one”, “hand over an old one and buy a new mattress at a discount”. Upon delivery, the loaders exchange the new product for the old one, and thereby solve all the difficulties with processing.

Such promotions are carried out by Ikea , the Orthomax factory, sellers of orthopedic products Son-Tek Duplex or Lux and others. The conditions presented are a lift into which the mattress will fit and its satisfactory condition.

Ascona recycling program

The well-known manufacturer of sleep products, the Askona factory, constantly holds promotions to attract customers. For a long time they offered a discount on a new Askona mattress when returning an old product, and for this it was not necessary to go to the store. This could be done through the factory’s official online store.

Note! Firms for recycling usually take only products from their own production.

Finding the source of the leak

Is everything okay with the valve, and it became obvious that there are still holes in the material? Well, it’s quite possible to seal them at home, but first you need to determine where exactly the gap is, and doing this without using household tricks is oh so difficult. By the way, in such a situation there is no need to look for someone to blame: very often holes appear on air mattresses simply during operation without any external mechanical damage.

• A great way to identify holes is to use a foam solution, which is best made with bubble bath or dish detergent. Apply the solution to a mattress completely filled with air, section by section, using a sponge, cloth or spray bottle, and you will see that in some places large bubbles, like soap bubbles, will begin to form. It is in this place that you need to look for a hole.
• First of all, holes should be looked for at the boundaries of the adhesion of the outer fabric with the internal elements, and this is the entire length of the relief pattern. This is the most vulnerable area, although small tears along the seam or on the main fabric cannot be ruled out.
• Having found a hole, circle it with a pen or marker so as not to forget its location, because you can seal the mattress only when it is dry, and by that time the tears can be lost from sight.

Also, don't get complacent when you find one hole: often, especially on older mattresses, you'll be dealing with multiple tears at once, so it's best to inspect the mattress thoroughly and completely.

When inflating your mattress, remember that overfilling it with air over time can cause small or even large tears in the surface.

Which mattress is better - foam or cotton?

In terms of price, both foam rubber and cotton products are approximately at the same level and belong to the lowest price category. Their orthopedic effect is not at the highest level, but in any case, such mattresses can also be considered as a temporary option.

cotton wool

If we talk about mattresses with cotton filling, then their main advantage is the use not of synthetic material, but of cotton, which is harmless to the body. In addition, this material retains heat well, so the bed will be more comfortable.

However, cotton wool as a filler also has many disadvantages:

• The service life of a cotton wool mattress is unlikely to exceed 5-7 years, even with careful care and regular washing of the cover.
• It happens that various insects infest cotton, and it is very difficult to fight them.

Seal holes and tears in an air mattress

The same store where you bought the bed probably sells branded repair kits to fix the problem, but you most likely want to know how to seal an air mattress at home without spending money on expensive kits. You can properly and efficiently repair an inflatable bed yourself using improvised means if you follow a certain algorithm.

1. Proceed with sealing only after the mattress is completely dry after taking a soap bath.
2. Buy PVC glue: the classic “Moment” is quite suitable, since after drying it becomes like rubber. But its transparent variations, although they will make the patch more neat, can negatively affect its quality, since such compositions “glass” after drying and can crack when bent. For the same reason, superglue is not suitable. In addition, it can ruin the PVC material, as it is an aggressive adhesive.
3. As a patch, you can use a piece of thin rubber or, for example, patches from a tire repair kit if you are a motorist and you have them lying around idle. In this case, the patch should cover the hole by at least 1 cm on each side. So, for a simple, barely noticeable hole, you need to cut a circle with a diameter of 2-3 cm.
4. Both the area with the tear and the patch itself must be thoroughly degreased using acetone or another product if you want the adhesion to be really strong. If your mattress has a flocked surface, then the pile must first be removed with acetone or fine sandpaper: it will not be possible to properly glue a patch to it.

Due to the specifics of working with Moment glue, the mattress can only be sealed in a deflated form, otherwise it will not be possible to press the surfaces tightly together, since the mattress will spring. Apply glue to the damaged area of ​​the mattress and to the patch, wait 5 minutes, press the surfaces firmly together and secure the patch in place with a weight for the next 24 hours.

If the mattress begins to deflate while on a hike or at a tent camp and there is no way to repair it, good electrical tape will completely cope with the problem before you arrive home, although this method does not work well on a velor surface.

It’s possible to repair an air mattress with your own hands, without going to a workshop or buying special repair kits, if you set aside a little time for it and follow the listed recommendations!

Tips for use

Modern models of air mattresses can be used not only as a bed, but also as a swimming device. And in order for them to serve as long as possible, you need to fulfill only two basic conditions - use the mattress away from sharp objects and dry it well before storing.

Do not overinflate an inflatable product. To avoid overdoing it, it is better not to use powerful compressors and car pumps. The air can only be released gradually. If you sit on the mattress to speed up this process, the seams may come apart. The product can only be cleaned with a solution of neutral shampoo or soap. Remember that the less chemicals, the better. It is better not to use aggressive powders.

If you are interested in how to seal an Intex mattress, then first of all you need to assess the situation. You can deal with small holes yourself, but large holes are best left to specialists. In addition, the help of a service center will also be needed if the mattress is swollen or damaged by dog ​​teeth or sharp claws of a cat. The technician will not only repair the rupture site, but also completely replace the damaged areas (if necessary).

High-quality repair of an air mattress with your own hands can extend its life for a long time. The combination of a good adhesive composition and durable patches will make the product resistant to further loads. The main thing is to adhere to the basic rules of use and storage. In this case, new defects will no longer appear on the surface of the mattress.

Pros and cons of a frameless chair

A soft and cozy ottoman is an excellent alternative to standard models. Such furniture can decorate any room and fit into the chosen style. Under the weight of a person, the chair takes on a special shape, which allows the vacationer to relax as much as possible, spend time comfortably reading a book, watching his favorite television programs, and communicating with his family. This design has a number of positive qualities, but is not without its disadvantages. Among the main advantages are:

1. Mobility. The finished product is characterized by low weight and is often equipped with a special handle located on the lid. This allows you to move it around the apartment, move it or move it to another place without much effort.
2. Benefit for health. Doctors recommend using frameless models for people who have problems with the spine. Thanks to its ability to adapt to the contours of the human body, the product provides reliable support for the spinal column.
3. Safety. The furniture does not have a frame; therefore, it does not have sharp corners or hard parts, which makes it possible to install it in a children's room.
4. Environmental friendliness. Natural materials used to sew covers, natural fillers, allow you to create an environmentally friendly product.
5. Easy care. The outer cover is easy to clean from any dirt, and if necessary, it can be removed and washed in a washing machine.
6. Durability. If the outer fabric is damaged, it can be sewn up, but inside there is simply nothing to break.
7. Attractive appearance. The original structure and wide selection of color palettes will allow you to choose a product that matches any style.
8. Safety of the floor covering. The absence of a point load makes it possible to move an object across the floor without damaging it.
9. Comfort and versatility. Absolutely all people at any age can relax on such a chair, regardless of height and weight.

The disadvantages of frameless structures include the following:

1. The main disadvantage is the crushing of the filler. Over time it needs to be replenished.
2. The outer cover requires periodic cleaning and washing.

When installing a chair in a children's room, it is necessary to monitor the child so that he does not accidentally unfasten the cover, which can lead to unpleasant consequences for cleaning up spilled raw materials.

Choice of design and shape

Creative people who value comfort and individuality have come up with many design options for making a bean bag chair with their own hands. For example, there is an original solution when an upholstered chair is sewn in the form of an open glove, where the seat is the palm, and the role of the back is played by 5 fingers. But four forms became the leaders of frameless seats:

1. Pear - reproduces the classic configuration options for upholstered furniture as much as possible. The pear chair consists of 6 side elements, shaped like this fruit, and two more parts - for the base and the top with a hexagon outline. This model allows you to comfortably recline in a chair with good support for your head.
2. The ball is most in demand among young men and sports fans. A bean bag chair for a boy can have the same shape, which you can simply make with your own hands from black and white pentagons sewn together. If you choose leatherette as the outer cover, the soft ottoman will look like a large football attribute. Basketball fans construct a seat from two semicircular orange spheres with a dark stripe. Moreover, fans can decorate their accessory with stickers or embroidery of the team name.
3. Drop - an option similar to a pear chair, but looks more futuristic. The side walls can be made of four or six pieces, resembling a teardrop but with a flat base. The bottom, accordingly, is made in the shape of a square or hexagon. Due to the absence of the upper part (lid), the back of the soft chair looks like a cone, which is easy to hold on to and move the seat to another place.
4. Oval is the latest fashionable solution, classic in shape, offered by factory designers. This chair is a bit like a bed, as you can sit on it in any position, even lying on your back. The shape corresponds to the name and consists of two large oval parts. A wide ribbon is sewn between them, which regulates the selected height for the pouffe chair.

The configuration of a frameless chair can be fancy (in the form of an open flower, a crown or a funny animal - a penguin or kangaroo), but the most important criterion will be the ease of use. The soft seat should not have hard folds, buttons or decorative elements that will create discomfort.

Pear

A drop

Oval

Flower

Ball

What you need to make a bean bag chair

Before making a beanbag chair, you need to prepare the materials.

You need to understand that to create a large-scale product you will need many components:

• fabric for creating internal and external covers;
• two large zippers for convenient use and maintenance of the chair;
• scissors;
• threads;
• filler;
• A sewing machine will simplify the work process, providing a neat seam.

The volume of materials is determined by the desired dimensions of the product.

Selecting material for the case

For the outer cover, purchase a durable, wear-resistant, stain-resistant, waterproof, and pleasing to the eye fabric. In accordance with the design of the room and the functional purpose of the product (for home, cottage, gazebo), choose:

1. Oxford;
2. flock;
3. thermojacquard;
4. scotchguard;
5. microcorduroy;
6. eco-leather, etc.

Oxford is a synthetic material; the reverse side is covered with polyurethane to protect it from dust and dirt. The composition is durable, waterproof, elastic, resistant to temperature changes, and is available in a wide palette of colors. The fabric is practical, budget-friendly, does not require ironing, is easy to wash and clean with a damp sponge.

The outer cover for the chair is made of thermal jacquard. The material is durable, distinguished by original combinations of shades and the use of ornaments. Heat treatment technology involves applying paint to the finished fabric. The raw materials are hypoallergenic, because... contains up to 65% cotton. Suitable for indoor spaces and gazebos only.

Velor has a velvety surface, is durable, retains its shape, is wear-resistant, and does not wrinkle. The material is made from natural raw materials or synthetic ones.

Flock combines cotton raw materials and polyester. The material is durable, high quality, smooth texture, easy to clean.

Microfiber consists of polyester and polyamide, is breathable, wear-resistant, resistant to chemicals, aesthetically pleasing, easy to care for and wash.

Microvelvet is suitable for using the chair at home. The material is of high quality, available in plain colors or with graphic patterns. The fabric is made from cotton and elastane.

Artificial suede is a furniture fabric, made from polyamide fiber, and is characterized by abrasion resistance, color fastness, ease of care, and a wide palette of shades.

Eco-leather is a dense, wear-resistant material that preserves the surface structure and is optimal for modern design. The raw materials used are cotton and polyurethane (as a protective coating).

It is possible to use improvised materials. For a country house, a bean bag chair made from old jeans or raincoat fabric is optimal.

The fabric for the inner cover must be strong, with a dense cross-section of threads, and breathable. Spunbond, calico, satin, polyester, etc. are optimal.

Filler selection

To sew a frameless chair with your own hands, you can use different fillings. Each material has certain characteristics. Some are not suitable for allergy sufferers, others are too expensive, and others are not suitable for outdoor use. However, all existing types can be divided into several main categories:

Natural:

1. wood chips and sawdust;
2. bird feathers;
3. horsehair;
4. wool;
5. buckwheat husk.

Synthetics:

1. expanded polystyrene;
2. polypropylene;
3. polyurethane foam;
4. holofiber.

Materials on hand:

1. flakes;
2. legumes;
3. hay, straw;
4. paper;
5. pieces of foam rubber;
6. cotton wool;
7. old clothes, textiles.

There are many types of raw materials that can be used to fill frameless furniture. The main thing is to choose the right fabric for sewing the cover, through which the used filler will not penetrate.

Photos of beanbag chairs with your own hands

In the selection you can see what the finished products look like.

Sources

• https://pro-dom-mebel.ru/vidy-mebeli/kreslo/kak-sdelat-kreslo-meshok-svoimi-rukami-bystro-i-bez-problem
• https://roomester.ru/dekor/mebel/kreslo-meshok-svoimi-rukami.html
• https://VseMe.ru/svoimi-rukami/kreslo-meshok-svoimi-rukami
• https://mblx.ru/sidenie/1206-kreslo-mesok-svoimi-rukami.html
• https://remont-spalni.ru/mebel/kreslo-meshok-svoimi-rukami.html
• https://tkanix.guru/krojka-i-shite/kak-sshit-kreslo-meshok
• https://aprpress.com/detej/15-kreslo-meshok-svoimi-rukami-master-klass.html
• https://vdome.club/podelki/shitye/kreslo-meshok-kak-sshit-svoimi-rukami-i-chem-napolnit.html
• https://bezkovrov.com/gostinaja/kreslomeshok.html
• https://infofrog.ru/kak-sshit-beskarkasnoe-kreslo-meshok-svoimi-rukami.html
• https://diy-master.info/kreslo-meshok-svoimi-rukami/

Creating a pattern

How to make a beanbag chair so that it turns out smooth and of high quality? To do this, a detailed and correct pattern is first created. It is easy to form on your own, and you can also see different types of patterns below. As a rule, they are all identical, but may differ in the size of the beanbag chair.

The whole process is divided into the following stages:

• patterns are made, and it is desirable that they initially have the required dimensions, which will subsequently affect the dimensions of the chair bag;
• the result is 4 main elements, with the help of which the bag chair is created;
• An economical option involves applying the pattern to the fabric itself, after which the necessary elements are cut out.

Patterns for bean bag chairs can be different, since they completely depend on what dimensions and other parameters the product will have after work. When creating the main parts of the product, it is important to monitor the economical use of fabric.

Chair drop

Bean bag chair pattern - one of six wedges in adult and child sizes

A cardboard bed for a doll is the main thing to start with

Not a single bedroom can do without this item. Everyone needs a bed, and it has a fairly simple design that will help you start making furniture.

For production, it is better to use thick ornamental cardboard, but you can get by with a box that needs to be cut into pieces. The presented diagram is suitable for a medium-sized doll, where yellow and green circles indicate the cuts that will become the connection points. To make the bed look impressive, you can cover it with watercolors or stick a self-adhesive wood-like film on top, then the small bed will not differ from furniture made from natural materials.

The creative process will take 10-15 minutes, but more time will have to be devoted to making a mattress, pillows and bed linen. You will need scraps of fabric, some padding polyester and thread with needles. For a mother who is used to sewing, making bedding will not be difficult.

vote

Article rating

Stuffing with filler

If a hand-sewn pear chair is ready to be filled, then the filling process will depend on the material chosen. If you choose lightweight polystyrene foam, soft bean bags will require at least 450 liters of raw materials, as they are designed for a maximum size of XL. When filling a pouffe bag with foam granules, you will have to be very careful, since the weightless balls often fall apart.

To avoid unnecessary debris, it is better to connect the neck of the bag with the bulk contents and the hole in the inner case, which should fit tightly to the package. It is also recommended to spray the fabric with water to reduce the electrostatic effect of the foam. The best solution would be to stuff it with filler using four hands.

The same method of connecting containers is suitable for bulk biological bases (legumes and buckwheat). When using old things, they are not just cut into small shreds, but also the method of laying them in layers is used so that the lumps do not puff up on the sides and do not protrude as irregularities under the cover. The most comfortable simple filler is synthetic padding polyester, as it is light in weight and laid in even layers.

Fill the bean bag chair with filler

Patterns of bean bag chairs with dimensions

The bean bag chair cover pattern can be of any size, it all depends on personal preferences and the availability of materials. They draw it themselves, taking into account optimal measurements, or use a ready-made one. For independent “drawing”, it is convenient to use graph paper; it is easiest to transfer markings to fabric. The parts are cut out along the contours.

The pattern of a bean bag “drop” for an adult includes:

• 6 wedges 40 cm at the ends, 15 cm wide, 130 cm long, 50 cm in diameter;
• diamond-shaped top - 15 cm on each side;
• diamond-shaped bottom - 40 cm on both sides.

To get a beautiful product, it is important to strictly follow the patterns

To get a beautiful product, it is important to strictly follow the patterns. Measurements can be adjusted, the main thing is to maintain the proportions

For a children's model of a bean bag chair, 6 wedge-shaped parts are taken:

• 90 cm height;
• 45 cm diameter;
• 40-22 cm width.

The finished bean bag chair includes an inner cover with a zipper and polystyrene foam filling. External covers are usually made of velor, leather, corduroy.

Step-by-step master class on making a frameless chair

A master class on making any product begins with preparing all the necessary materials and tools. First of all you will need:

• Fabric for the cover 3 by 2 meters;
• Fabric for cover inside;
• Long zippers of 100 and 30 cm;
• Filler;
• Threads.

Tools you may need:

• Sewing machine;
• Centimeter;
• Scissors;
• Pencil or soap;
• Graph paper for creating a pattern.

Step-by-step manufacturing instructions:

1. Create a pattern and transfer it to fabric;
2. Cut out all the parts;
3. Zigzag the edges of the parts;
4. Fold the side wedges and stitch 15 cm at the top and bottom;
5. Sew a zipper into them;
6. Sew down the side seams of the other wedge and stitch from the “face”;
7. Sew the inner cover in the same way.

Pear

How to make a frame version yourself?

Making a chair-bed begins with cutting out the necessary parts. To create a frame, work begins with:

1. 
   Manufacturing of cases. We measure sheets of chipboard, fiberboard and plywood and put marks on them. Cut out the parts with a jigsaw. The back and side walls will be made of chipboard, the bottom will be made of fiberboard, and the folding part will be made of plywood.

2. We connect the supporting side parts with the bottom and back with self-tapping screws.
3. Now let's start making the folding part. We make two frames from timber and attach them to sheets of plywood.
4. For smooth and convenient folding of the chair, a metal transformation mechanism is used, which is fixed on the sides by steel profiles with through hinges.
5. Now let's start upholstering the frame.
6. Glue the cut piece of foam to the top of the frame.
7. Apply the upholstery evenly over the top and secure with a furniture stapler.
8. The thighs are trimmed in the same way. You can only reduce the thickness of the foam for this part.
9. Now we will work with the legs. They will be placed front and center of the frame.
10. Wide bars, previously cleaned and sanded with sandpaper, can be placed as armrests.
11. If desired, such furniture can be supplemented with a large lower drawer for storing clothes.
12. Separately, pillows can be sewn to the product, on which foam rubber or cotton wool can be folded.

This is what we saw in the chair bed frame model.

Manufacturing stages

The procedure depends on the type of model selected. Among the general stages are:

• cutting parts of the chair-bed strictly according to the drawing, grinding surfaces, trimming, drilling holes for corner fasteners and the transformation mechanism;
• assembly of the case, installation of folding elements;
• covering the chair with soft filling;
• textile covering.

In the absence of experience, it would be better to make a chair-bed with your own hands as simply as possible - with a solid, stable body and a retractable or foldable sleeping part.

Cutting out the parts

At this stage, parts are cut out of the timber to assemble the frame of the chair-bed, and the sidewalls (armrests) are cut out of chipboard or its analogues with a thickness of 18 mm or more. Thin but durable plywood is sawn into squares that cover the folding parts. All parts are polished, impregnated with antiseptics, and dried. The stage ends with marking and drilling holes for self-tapping screws.

An important condition is that all parts of the chair are cut without deviations from the specified dimensions, with an accuracy of 1 mm.

Housing assembly

Work begins with assembling the base of the chair. After this, the back and 2 supporting sides are sequentially screwed to the bottom with self-tapping screws. Retractable or folding elements are assembled after checking the stability of the main body. The chair transformation mechanism is fixed last, in specially cleaned areas.

Work on assembling the chair body is carried out exclusively on a flat, stable base.

Sheathing

At this stage, the assembled structure is sequentially:

1. It is pasted over with pieces of foam rubber from 2 to 10 cm thick.
2. Sheathed with pre-cut textile blanks with a margin of at least 1.5 cm at the edges.
3. Decorated with armrests (if available).

Purpose of a functional bed, popular manufacturers

The work is carried out using glue and a furniture stapler. In most cases, the textiles are stretched over the parts with fastening to the bottom of the timber frame. At the request of the owners, the chair-bed is decorated with an additional removable cover, made upon completion of the remaining work.

Installation of the transformation mechanism

To assemble a chair-bed, any ready-made transformation mechanism can be used. Of the offered range (over 15 varieties), the models presented in the table are best suited for these purposes.

The above list is far from complete. When assembling a chair-bed with your own hands, you can safely use the Sedaflex, Mixotoil, Spartak, Puma, and Accordion systems. The main criteria for choosing are cost, the possibility of using a linen box, the height of the steel space, and compliance with the selected dimensions of the furniture. You also need to pay attention to the admissibility of daily use (not all mechanisms are provided for, in some cases there is no need for frequent layout).

In primitive folding chair designs, the elements are connected using ordinary but reliable metal hinges.

"Dolphin" "Tick-tock"

"Eurobook"

"Telescope"

"HODRY"