✅ How to make a washbasin in the garage

The nuances of installing a washbasin in the garage

In order to use the washbasin comfortably and prevent the negative consequences of its installation, including leakage, a number of nuances should be observed. In particular:

the sink should not protrude beyond the wall structure at the entrance to the garage for free opening and closing of the gate;
if you plan to use the washstand on rare occasions, it is enough to use a bucket to drain;
the installation site of plumbing must be carefully sealed to prevent liquid leakage;
It is important to conveniently position the equipment so as not to create obstacles for vehicle passage.

Types of washbasins

You can make a washbasin for the garage from scrap materials or purchase a ready-made design . The simplest option is a homemade design made from a plastic container and wire. Having secured the structure to the wall, you will need to periodically pour water into it, and a regular bucket will be used to drain it. The homemade variety must meet the following requirements:

ease of installation using available tools;
use of budget materials;
sufficient sink volume for hygiene procedures;
safety (absence of electrical equipment and non-insulated contacts near the washbasin);
the presence of an additional hole for adding water without using a pump;
thoughtful design of the locking mechanism.

Article on the topic: How to build a shed from timber

You can also purchase a ready-made sink and connect it to a homemade drainage system. Pipes for draining water can be taken outside the premises at a distance of several meters from the entrance. There you can dig a hole and cover it with a small homemade lid made of wood or metal. This type of washbasin is suitable for installation in a garage on a country or summer cottage.

More convenient to use is a standard sink, which requires connection to utilities. If pipes for draining water are connected to the garage, all that remains is to buy a washbasin that suits your own wishes and connect it according to the standard circuit, the same as in residential buildings.

Types of washstands

The simplest suspended structures. These are containers with pressure spouts, when lifted, water begins to flow. Their volume is literally several liters, and the main advantage is the ability to hang it on any tree, wall, and so on. Water is poured manually and drained onto the ground, into a bucket, basin or any other container that you provide. They are not suitable for washing dishes due to the small volume of the container.
Washstands on the counter for the cottage. Compact device standing on special legs. The tank is attached to the top, and the top cover also serves as a place to place a soap dish, for example, toothpaste and other personal hygiene items. Excellent for installation in the ground, since the special design of the legs “bites” into the ground and firmly fixes the washbasin. The tank volume is usually from 8 to 15 liters.
Moidodyr. This is a product that includes the washbasin itself, the sink and the cabinet. Suitable for outdoor and indoor use. Although the design is quite heavy, it is still mobile, which means it can be moved from one place to another if necessary. The presence of a sink makes it easy to wash dishes, vegetables, and rinse fruits under running water, since the tank volume is about 20 liters in some models. But it could be less.
Heated washbasins. Their design can be different, from a simple washstand with a stand to a washbasin. The key difference is the presence of a tubular electric heater in the tank, that is, a heating element, which helps heat the water. Due to the presence of a thermostat in modern models, you can independently determine the water heating temperature - from 30 to 70 degrees Celsius. The tank capacity is also 10-20 liters, and in some models - more than 30 liters.

Where to place a sink in the garage

When developing a garage project, the location for the car and the inspection hole are designated in the center of the room. There should be at least 2 m on each side of the car for comfortable use of the space. To install a washbasin, you often need to free up additional space. By allocating a small space in the corner of the building, you can make a full-fledged washbasin. Corner placement provides the following advantages:

you can install a hole with a drain pipe to drain dirty water outside;
plumbing will not create inconvenience for passage indoors;
The ventilation hole located in the lower corner can be combined with the drain.

If utility lines are connected to the building and they are located in the central part of the wall, it is allowed to install plumbing away from the corner. In this case, it is necessary to provide a convenient approach to the washstand and make sure that it does not create obstacles to free movement.

How to install correctly

Features of the installation process depend on the type of sink chosen. If you want to make a washbasin from scrap materials, you need to fix a container on the wall, and build a drainage system from plastic pipes. The water drain can be drained into a bucket or out through the ventilation opening. For external drains, securely secure the pipes, but do not completely cover the vent. This is necessary so that the pipes do not move when water moves inside them, and fresh air passes into the room through the remaining hole.

Article on the topic: How to make a pipe for a stove in a garage

To prevent a hand-installed washbasin from splashing cold and hot water onto the walls of the garage, it is recommended to stick tiles or use other moisture-resistant material in the work area.

You can use a wooden stand or basket as a shelf for storing soap accessories, towels, tools and other things.

For convenient use of the washbasin, you should also attach a lighting fixture next to it. In everyday conditions, it is enough to make a light source by carrying it from the nearest outlet.

How to make a car wash with your own hands: assembly process

To create a car wash yourself, you will need a coupling. This element will allow you to connect the electric motor and the pump. A soft coupling would be the best option for a high-pressure washer, as it can compensate for axial misalignment of the shafts and improve the quality of work. Also, this type of coupling will act as a fuse in case the gearbox or pump jams.

An important element in the assembled structure is the water container. Because the operation of the pump must be uninterrupted and uniform. and this requires a constant volume of water.

A tank connected to the water supply network is usually used as a water container.

A fine mesh should be installed at its outlet, which will act as a filter. This is necessary so that dirt cannot get into the pump and disrupt its operation. Washing efficiency will improve significantly if you add additional detergent to the tank.

An important element of a mobile car wash is also:

All these elements must be connected to each other and then fixed to the frame. When the process is completed and the work is considered completed, you can begin testing your homemade device.

In your garage, you can equip a car wash with your own hands. You can plan it even when you just decided to build a garage. If you follow all the recommendations, you can get increased comfort when operating your car, as well as make some outdoor work in a country house easier.

Source

Arrangement of the garage. Part 1. Washstand.

Since I do a lot of work on the car myself in the garage, I needed to wash my hands somewhere after working on the car, so I bought an ordinary rural washstand in the epicenter.

I decided to share with you how you can wash your hands, etc., as cheaply and conveniently as possible. in the garage. Below I will give an example with prices and photos of the process.

In general, as always, to make it clear