How to make a soft bucket for mixing bait from PVC with your own hands


DIY wooden bucket: materials and tools. Making a bucket

Modern materials and technologies have replaced traditional wood from many industries, but in some cases it remains indispensable. If you need antique-style utensils for a bathhouse or a country house, then you can’t do without wood. We will tell you how to make a wooden bucket with your own hands.

You can make a wooden bucket yourself.

Tags

with your own hands from with your own hands from with your own hands With your own hands...with your own hands from with your own hands with your own hands from Handmade Handmade woman with your own hands. How to make a bucket How to make a bucket made from How to make a bucket made from How to make a bucket yourself make much you can make it do not Make it with your own How to make it How to make a bucket How to make a bucket from tin from tin galvanized tin without tin its own from tin from tin in tinsmithing. its rigidity. roofing tin. types of tin.

rebate pipe with a hammer bend the hoop ear the edges of the hammer hitting read the mandrel

Bucket made of wood

Purpose

It is impossible to create a traditional rural setting without wooden utensils.

Many readers will be surprised: who in our time could be interested in the technology of making wooden buckets? In any supermarket you can easily find inexpensive products made of plastic or metal, which are lighter, stronger and more convenient than antediluvian vessels made of boards.

In addition, modern models are much cheaper than their older brothers, which can be easily seen by looking at the prices in the bath accessories department. However, if you are afraid of the price of the finished product, you can easily make it yourself.

Flower pots are often stylized as antique.

However, let's return to the main question. The fact is that everything antique acquires value as a kind of props when it is necessary to create a certain atmosphere and surroundings. This fate also befell wooden utensils.

So, let's list the most typical areas of use of antique-style wooden utensils:

  • Restaurants, cafes and clubs, the interior of which is designed in the style of old hunting lodges, taverns or taverns;
  • Hotels and holiday homes, the style of which corresponds to family estates, estates or castles of yesteryear;
  • Baths and saunas, made in traditional interior solutions. This is perhaps the most extensive area, and you can hardly find a Russian bathhouse without a wooden bucket or font;
  • Many owners of private log houses like to decorate their premises in the style of ancient Russian chambers;
  • Finally, all kinds of thematic events, reconstructions of past events, filming of films, videos, advertising and various programs may also require appropriate props.

Not a single Russian-style bathhouse is complete without antique dishes.

Important! It should be remembered that props can be purely decorative and not fulfill their functional purposes. If you want to use the cookware for its intended purpose, you should do it conscientiously according to all the rules.

Materials and tools

Wooden sauna buckets are made from high-quality lumber.

Article on the topic: How to insulate plastic windows in a wooden house

To make a wooden bucket with your own hands, you can use raw materials of various species. Considering that large volumes are not required, you don’t have to worry too much about the cost of the array, because you don’t need a lot of boards to produce one or two vessels.

In addition, you should buy a strip of hot-rolled steel with a thickness of 2 mm. The length should be enough for two girths with an overlap of 80 - 100 mm. The width of the strip is chosen according to the tastes of the master, but usually it is 30 - 50 mm.

You will also need a pair of bolts with nuts with a diameter of 8 - 12 mm and a length of about 100 mm to tighten the hoops around the board staves.

Clamps can be optimized by welding.

If we talk about breeds, then when choosing, you should be guided by the table:

Wood speciesProperties and Features
OakThe service life in water is over 35 years, at first it can give a bitter taste and color the liquid brown. The most durable and durable raw materials
LarchThe service life in water exceeds 25 years; it does not affect the taste and color of water. Larch is the most durable and moisture-resistant coniferous wood from which the support pillars of Venetian houses are built.
ElmCan last in underwater conditions for about 20 years, but is afraid of rotting in air
AlderDurability in contact with water approximately corresponds to that of elm, does not stain water and does not affect the taste, rots in air
BirchCan last in water for 10 – 12 years, does not affect the quality of the liquid, is afraid of rotting
WillowThe least durable material, its service life is on average up to 8 years in contact with water. At the same time, it does not affect the characteristics of water and is not afraid of rotting.

Tools you will need:

  • circular saw for slicing;
  • jigsaw;
  • manual frezer ;
  • mallet;
  • two clamps;
  • vice;
  • plane;
  • hacksaw;
  • file;
  • sandpaper and pencil.

Use high-quality lumber without knots or other defects.

Important! For a high-quality result, you should buy a radial cut oak board of the first grade, 10 mm thick and 50 - 60 mm wide.

Material

Plastic

The most popular option nowadays. There is constant demand for them, so their range is constantly increasing. They are very convenient for home use. Such buckets are quite environmentally friendly; you can store food in them and the bucket will not absorb their odors.

The food storage bucket is specially marked hdpe or pp, which means that they are made of food-grade plastic.

Important: In order not to get confused in the letters of the markings, when purchasing, look for an image of a fork or glass, this is the same as hdpe or pp. Buckets made of non-food plastic are marked pvc.

Protect this bucket from high temperatures and severe frosts.

Metal

A metal bucket is an indispensable thing when performing construction work. It can carry any liquids, bulk substances, etc. They have high strength, which allows them to be used even if damaged, dents or deformations.

These buckets are not afraid of temperature changes.

Tin buckets

Such buckets are universal; you can store food in them, use them for cleaning, carry bulk substances, and even dilute fertilizer. It can also be used as decoration if you choose a beautiful design. Yes, yes, now it is very easy to find a durable and beautiful bucket.

Enameled buckets

A very popular model among housewives. For its manufacture, thin sheet steel coated with glass enamel is used. You can store food and various liquids in them, because the enamel does not react with them. Typically, such a bucket is equipped with a lid.

They are very durable, do not corrode or oxidize unless damaged (enamel chips, for example).

Galvanized buckets

Many people still prefer galvanized buckets because of their versatility. In such buckets you can transport crops, and even store milk and food. It is important to know that it is not advisable to cook or boil anything in them and to store food for a long time.

This bucket is durable and does not corrode.

Stainless steel

Like galvanized ones, stainless steel buckets are universal. You can store food in them and use them during construction and in the garden. They are also called cast, because during manufacturing they are made without seams or joints.

Wooden buckets

Wooden buckets have become less and less used, but not entirely. For pickling, pickling and soaking, a wooden bucket is ideal.

Wooden buckets have a peculiar “appearance”. In their production, natural wood is used, and special technologies are used for joining, without glue, fasteners and “synthetics”.

The greatest use of such buckets was found in baths and saunas. They are made from linden or Altai cedar. Under the influence of bath steam, a stunning aroma is released, which adds to the mood during bath procedures.

Making a bucket

The photo shows the process of making the vessel.

So, if you have not yet changed your mind about working with your hands, then here are a few instructions for you on how to make a wooden bucket:

  1. From the boards we assemble a square shield, the side of which is equal to the diameter of the bottom. We connect them with glue dowels and compress them with clamps until dry. Then use a jigsaw for wood to cut out a circle;

We cut out a circle from a board panel.

  1. On both sides along the edge of the bottom we chamfer to a depth of 2.5 - 3 mm;

We remove the chamfer from the edge of the bottom.

  1. We cut the required number of boards (depending on the size of the vessel), clean and sand the cut area. At a distance of 3 - 4 cm from the edge on one side of each board we make a rectangular groove 4 mm deep and 1 cm wide;

Article on the topic: How to build a bathhouse with a relaxation room

The bottom will be inserted into the groove.

  1. We profile the ends of the boards for a round groove and a round tenon, as shown in the photograph;
  1. On the front side of each board we make two grooves into which a strip of steel hoops will fit. We cut the strip so that when it is wrapped around its ends almost touch, and then we bend it 2 cm from each end at 90˚ and make holes in these ears slightly larger than the diameter of the bolts;

We make clamps from steel strip.

  1. Place the boards on the bottom, gently tapping them with a mallet. We insert the last board from above and hammer it into the general row with a mallet. For convenience, the boards can be tied together with twine;

We assemble the walls from boards.

  1. We put on the hoops and tighten them first with an adjustable wrench and then with nuts. We make sure that the boards lie level.

We tighten the products with clamps.

Important! After assembly, the bucket must be lowered into water so that the wood swells and all the cracks close.

Ideas and solutions

Plastic buckets

Crafts for the garden from mayonnaise buckets are, first of all, various pots for flowers and seedlings. What is missing from a bucket to a full-fledged pot? Of course, the original appearance.

Paper emoticons.

Each garden pot is decorated with regular colored paper. For gluing, you can use office glue; The decor is applied to the bucket from below.

How to protect paper from water when watering? Transparent water-based acrylic varnish. The first layer is applied in a thin layer, so that the paper does not swell; After drying, the second layer can be applied more boldly.

Ice cream sticks were used for decoration. A woolen thread wound in two rings acted as improvised hoops for holding the sticks together. To prevent it from moving, the surface of the sticks is coated with any transparent glue.

Decoration with hemp rope.

In this case, the basis of the decor is a hemp rope wound with glue. It is also used for laying transverse turns; While the glue is drying, they can be secured with a pin. Ladybugs were mercilessly bitten off from hairpins bought at the nearest jewelry store.

Gramophone records

Do you have a dozen old records lying around in your attic closet? Let me guess - the record player for them was sent with honors to an honorable and well-deserved retirement twenty years ago? We will find a use for them.

So, what crafts from records for the garden or garden house can be made with minimal time?

DIY wooden bucket

Hello DIY lovers, this time we will look at how to make a bucket out of wood with your own hands. This homemade product will be useful for those who have a bathhouse or simply for those who like such things. Of course, in comparison with modern plastic or metal buckets, this wooden bucket is heavy and not durable, but how does it look! You can also ferment cucumbers, tomatoes, apples, and so on in such a bucket. The author used fairly modern tools for manufacturing, so the assembly process turned out to be quite simple. If the homemade product interests you, I suggest you study the project in more detail!

Materials and tools used by the author:

List of materials:

- boards; — iron plates for rims; — screws with nuts; - thick wire (for the handle); - wood glue.

Bucket making process:

Step one. Cutting materials

Let's start looking for the necessary materials, we will need boards of the same thickness, the author used different trims. To get all the boards of the same thickness, the author ran them through a surface planer.

Step three. Bucket assembly

To assemble the bucket, we need to do some calculations, and then cut the boards at the right angle into the desired shape. The point is that after assembling the bucket, all joints have minimal gaps, only this will ensure the seal of the bucket.

We make grooves in the blanks for the bottom, and now the bucket can be assembled. For this we need masking or other adhesive tape. We simply assemble the bucket first flat on the table, gluing the boards together with tape, and then lift it, roll it up and have a finished bucket.

At the end, all that remains is to glue the bottom, here we will need carpenter's or similar glue; to increase the strength and tightness of the connection, we add small sawdust to the glue. We tighten the bucket and let the glue dry.

Step four. Headbands

We make rims for the bucket; they will hold the boards and also compress them, eliminating gaps at the joints. Here we will need iron plates, and we will bend them by cold forging. We take a hammer and hit one edge of the plate; it immediately begins to twist due to uneven internal stresses. Thus, we get the rims of the required sizes, and weld the ends.

Article on the topic: Why a frame house cannot be insulated with foam plastic

We carefully press the made rims onto the bucket, now we have it strong and airtight, and when water gets into it and the wood expands, the structure will become even more airtight and strong.

Decorative cardboard bucket

Hi all!

Today I have a simple and cute home decor idea. We will make a decorative bucket from cardboard.

What you will need for this:

  • Paper cup;
  • Corrugated cardboard;
  • Jute twine;
  • Hot glue;
  • Wire;
  • Stationery knife;
  • Acrylic paints.

Step 1.

We take a paper cup and separate the label from it, it will act as a template and, unfolding it, transfer it to a piece of corrugated cardboard, tracing it with a pen or pencil. If there is no label, you can make a label layout yourself.

Step 2.

We finish drawing lines on the resulting image, which, when folded, will resemble boards and two loops, so that when turning the glass they are located opposite each other.

Step 3.

We cut out the workpiece and make holes in the loops.

Step 4.

Having slightly trimmed our development along the lines, we make bends and try it on the cup, wrapping it around it.

Step 5.

Cut off the top rim of the paper cup so that it does not interfere in the future.

Step 6.

Having adjusted the cardboard template, glue it to the cup with hot glue.

Step 7

Paint the resulting bucket with acrylic paint. Let's dry it.

Step 8

Now you need to stick jute twine in a circle, in the upper and lower parts of the bucket, but it will play the role of metal clamps that hold the boards together on the real bucket.

Step 9

You need to wrap jute twine around a piece of wire, securing its ends with hot glue. The handle for the bucket is ready.

Step 10

Having bent the ends of the handle, we insert them into the loops (eyes) at the top of the craft and bend them a little further so that the handle holds.

Our decorative bucket is ready! Everything is very simple and fast. With this craft, you can decorate a room by placing it in a prominent place.

If you liked this idea, share it on social networks.

Features of using a dousing bucket in a bathhouse

The list of bath pleasures is incredibly wide. A place of honor among them is occupied by the process of cooling a hot body in a cold body of water, a snowdrift or under an invigorating dousing bucket. All these procedures not only provide physical pleasure and intense sensations, but also provide invaluable benefits to the body: they accelerate blood circulation, tone the skin, and cleanse it of toxins. In a word, they strengthen and rejuvenate the body.

It’s good if there are objects with cold water for immersion in or near your bathhouse. Otherwise, we recommend that you make a dousing bucket and enjoy all the delights of the original Russian bathhouse.

The shower bucket for a bath is a modernized, improved version of a wooden bucket, movably mounted on the wall of the washing room. This is a kind of container of significant size that instantly throws cold water onto the head of a visitor who pulls a cord or chain. Due to its functional purpose and similarity of shape, such a device has acquired several more popular names. For example, a waterfall bucket for a bath or an upside-down bucket.

Design of a shower bucket for a bath

Regardless of what material was used to create the pouring mechanism, its design will always be the same. A bucket for pouring into a bath consists of the following components:

    Brackets for securing the vessel to the wall;

Wooden or other container for water;

Systems for monitoring the level of water supplied from the water supply;

  • Rope, with which the bucket is tipped over if necessary.
  • In fact, the design is both ingenious and simple. Even a novice master can create one. There are many design options, among which making a bucket from wood is considered the most problematic. The finished product will require special care, but at the same time it will look more aesthetically pleasing than all other options.

    Some inconveniences of a wooden bucket are associated with the need to fill it with water in advance. The bucket must swell, otherwise cold water will simply seep through the cracks. However, you cannot regularly leave the container filled. Over time, the wood will become covered with mucus, and the water will become cloudy and begin to stink. A solution to the problem can be a plastic insert mounted in a wooden vessel. It will help to avoid unwanted hassle of caring for the system, while leaving the appearance of the structure completely presentable.

    Article on the topic: I have a toothache, can I go to the bathhouse?

The principle of operation of the dousing device

The device, called a dousing device, is a modernized version of a wooden bucket. It was invented by ancient Russian bathhouse attendants. In the old days it was made from birch bark or from a solid log by chiseling a cavity. Later, bathhouses and other containers were made by coopers from neatly planed and polished wooden dies, tightly intercepted by two turns of rope or metal strip.

Two holes were made in the opposite walls of the wooden dousing bucket into which a wooden pin was inserted. A kind of brackets were made from bars or thin logs. They served as a support for the pin along with a dousing container rotating around it. To control the water supply, the bucket was equipped with a rope or a thin chain. In order to trigger a cooling waterfall, you had to simply “pull the string.” If they pulled harder, all the icy contents would fall onto the steamed body in an icy stream. If you weakened the applied force, refreshed yourself slightly - and adjusted the “parameters” of the water supply.

The dousing device was suspended from the ceiling of the bathhouse so that a person standing at full height could fit under it. There were no special rules for its location: they focused on convenience. To keep the water in the dousing bucket pleasantly cool, they tried not to install it next to the steam room. The difficult part was the process of filling the high-hanging container. Nowadays this difficult work is entrusted to a flexible hose connected to the bath water supply. The loud term “device” was obtained due to the installation of a signal-overriding system such as a toilet float. Other radical changes bypassed the main structural elements. Those. The dousing device remained a bucket suspended from the bathhouse ceiling, but much more advanced in terms of comfortable use.

Let us summarize and at the same time describe the main design components:

  • A modernized dousing bucket for a bathhouse is a wooden container secured with brackets on the wall with a float system through which water is supplied. Sometimes a plastic or galvanized liner is rigidly inserted inside a wooden container to protect the wood from damage;
  • The device is equipped with a float, which spontaneously shuts off the flow of water when the bucket is completely filled with water. When emptying, access to the stream opens again;
  • the container is connected to the bath water supply or to a separate storage tank installed specifically for this mini-shower;
  • The float valve is connected to the water supply through a pipe with a flexible hose that does not interfere with the rotation of the bucket around the axis of the metal pin, which is used most often; bolted fastenings are less commonly used;
  • A ball valve is installed at the entrance to the device to shut off the water supply in order to preserve the bath water supply system.

Availability is a favorable condition, but not at all necessary for installing a dousing device. Nobody forbids you to periodically fill it manually.

The container can generally be installed outside to spontaneously collect very useful and soft rainwater. Mandatory for the internal location is a drain ladder through which water will be discharged into the sewer. However, there are exceptions: these are baths with and, of course, installing a dousing bucket in an open area outdoors.

Requirements for installing a dousing bucket in a bathhouse

If the size of the dousing bucket can be chosen personally by the owner of the bathhouse (large and tall or small and wide), then its location must certainly meet special requirements. In most cases, the upside-down bucket is installed in the washing room: water is supplied there and the drainage system is set up. Although the presence of running water is not at all a prerequisite for the functioning of the “Russian shower”. Water can be brought to the container using a flexible hose or simply poured manually while standing on a bench.

Sometimes a dousing bucket is installed directly on the street near the bathhouse. This option allows you to collect and use healthy rainwater for good purposes. But it is worth remembering that drainage on the street is no less necessary than inside.

The most difficult stage of installing a bucket in a bathhouse is correctly determining the required height. For people of average height, the recommended height is 2 or 2.2 m. For tall owners, it is worth setting the mark at 2.6–2.8 m. In any case, a person should be placed under the dousing bucket with their arms extended to the top. Do not forget that the vessel will turn over. Therefore, it is worth adding the height of the bucket itself to the planned mark.

Buckets for well

First of all, you need to understand that a bucket for a well should be of much higher quality than an ordinary household one. After all, it is constantly subjected to deforming loads, for example, when falling onto the surface of water or hitting the walls of a well during lifting. It is used much more often than a regular one, so the handle must be reliable. Well, don’t forget about the effect of water on metal, so everything should be made of stainless material. Buckets can be not only aluminum or galvanized iron, that is, metal, but also wooden and plastic. The wooden one is convenient because it is quite heavy and it is easy to scoop up water. It is quite durable if used properly. In addition, if the bailer breaks off the cable or chain, the bucket does not sink and is easy to get out of the well. The bucket is made from coniferous wood; they are least susceptible to rotting. The most common material is larch. The disadvantage is that it must always remain wet, otherwise the wood will dry out and cracks will form in the walls.

A plastic well bucket is more durable, but does not sink well when lowered into water. That is, it is quite difficult to scoop up water with them. But at the same time, it is impossible to drown it if it falls off the rope.

The most universal and most convenient is a device made specifically for a well. It has a cylindrical shape, is made of stainless steel, and most importantly, it is equipped with a special valve on the bottom that allows you to quickly fill it with water. When the bucket hits the surface of the water, the valve opens and liquid flows through the lower holes into the bucket; as soon as it begins to rise upward, the valve closes under the weight of the water. Such a device does not require deft throwing on its side to scoop up water. It can be used in wells of any diameter. The main thing is to secure it well at the end of the cable or chain, otherwise if it comes off, it will be difficult to get it out.

Bath bucket with plastic liner

You can make a doused bucket in the most primitive way, accessible even to people who have not previously had anything to do with wood. To do this, it is not necessary to become familiar with the basics of cooperage and learn to use special tools.

A couple of simple steps will help you quickly make a wooden container that costs a lot of money on the market:

    To begin, select an ordinary plastic bucket of the most successful color. For example, white or azure blue. Water in such a container will look very advantageous.

Next, remove the handle and any other parts present from the bucket. You don't need them at all. Don’t rush to throw them away; perhaps they will come in handy in the future.

Prepare 25–30 not too wide sanded wooden planks. Their exact quantity depends directly on the size of the plastic bucket.

Using super-resistant glue, attach the strips to the outer walls of the plastic container, imitating a wooden bucket. Coat the joints with transparent silicone.

  • Cover the “wooden” container with a suitable varnish and strengthen it even more firmly with metal rings.
  • The wooden dousing bucket with a plastic liner is ready. Externally it is difficult to distinguish it from natural, but internally it meets all the requirements.

    Enameled bucket with lid

    Enameled bucket, with lid, 12 l. 2S28

    Enameled buckets are an indispensable item in the household:

    • they can hold water;
    • collect and transport berries without fear of oxidation;
    • they are suitable for milk, sour cream, cottage cheese in those farms where they are engaged in animal husbandry;
    • You can use them to ferment cabbage, pickle cucumbers, mushrooms and other pickles.

    What are the advantages of enameled containers:

    • thanks to the enamel coating, they do not corrode and do not react with aggressive fillers;
    • Enameled containers look very attractive. Manufacturers produce them in a wide range of colors. In addition, they are often decorated with printed designs, which cannot but please the eye;
    • as a rule, they are equipped with lids and trays, which allows you to boil water, laundry in them, and even cook first courses in large quantities when necessary;
    • The handle of the enamel containers is covered with a plastic braid, which is very convenient. When carrying heavy filler in a bucket, the handle does not cut into your hands;
    • enameled containers with a lid are most often produced in a standard size - 10-12 l;
    • Basically, the shape of enameled buckets is not very diverse: cylindrical and truncated cone.

    They are very easy to use, wash well, and do not absorb foreign odors. Usually made from high-quality sheet metal with a thickness of 0.8 to 2.0 mm with double enamel coating, which is carried out, according to technical specifications, in two ways:

    • Wet or slip method, in which enamel is applied to the walls of the container using a spray gun or by completely immersing the object in liquid enamel. The item is then dried in an oven and the procedure is repeated.
    • Dry method, in which enamel powder is applied to the walls of a red-hot product. After this, the object is fired, a second layer of powder is applied and fired again.

    Note! Buckets treated in this way last a long time; the only thing that threatens them is chips of the enamel coating. The thing itself is unpleasant, because it opens access to unprotected metal.

    Wooden sauna bucket

    This method of creating a wooden bucket will be more to the taste of those who have previously dealt with the processing and use of wood. For a high-quality pouring device, you will need a piece of iron strip for two rims (about 3-5 cm wide) and a board of the 1st grade 1 cm thick. As a result, we will get a 10 liter bucket with a height of 40 cm.

    The manufacturing process is a little more complicated than in the previous method, but the result is correspondingly much better and more aesthetically pleasing:

    Article on the topic: How to make a ceiling in a wooden house with beams

    Prepare a template for the bottom parts and rivets (side strips).

    Cut the existing board into pieces that match the stave pattern. Treat them thoroughly with a plane and sherhebel.

    Bring each detail to a state similar to the template. That is, carefully cut off the excess, giving the rivets a slightly trapezoidal shape.

    Mark the outside of each stave. Cut the ends at an angle of 3 degrees so that when connecting the planks together, you get a circle.

    Also, on each rivet, make a 4 mm indentation at a distance of 4 cm from the bottom edge. This recess is necessary to install the bottom of the container.

    Do your first fitting. Gather all the parts into a pile, holding them with metal wire. Number all rivets. Determine the size of the bottom part.

    Using the template, cut out the piece for the bottom. Cut off the top and bottom of the ends, forming a circle, so that the diameter is 1 cm less than the originally measured one.

    Measure to excess and cut a piece of metal strip for the bottom rim. Use a hammer to give it the desired rounded shape. Make holes at both ends and rivet them (with wire in fives).

    Make two tight clamps from pieces of metal strips.

    Attach two opposite rivets to the rim, securing them with clamps. Next, insert all the other parts, trimming them as necessary. Thus, completely fill the entire clearing on one and the other half of the bucket.

    Place the workpiece in its natural position and install the bottom piece.

    Measure the top circumference of the bucket and make a second rim at a distance of 10 cm from the top.

  • Sharpen and file the product if protruding areas are visible anywhere.
  • Wooden bucket - equipment for a bath

    How great it is to take a steam bath and then drink kvass or cold beer!
    All ailments and ailments will be relieved by this procedure at once! This is why the bathhouse has been so highly valued since ancient times. And how nice it is to have your own personal bathhouse in the country and take a steam bath whenever you want and as much as you want! A good turnkey bathhouse can be built in just a week - of course, if professional builders get down to business. And you can make all the utensils for it yourself. To begin with, we suggest making a wooden bucket for a bathhouse.

    Our ancestors made buckets from birch bark, from type-setting planks, or they simply hollowed out a cavity in solid logs from a certain type of wood. The most interesting bucket is made from type-setting boards, so let's talk about it.

    To make such a bucket, you will need precisely fitted planks of aspen, linden or oak, approximately 10 mm thick. The size of the board for a ten liter bucket is approximately 400x10 mm. The bottom can be made in one piece from a piece with a thickness of 20 mm and a diameter of 200-250 mm. The end around the circumference of the bottom is slightly ground down to a size of approximately 10 mm. In the planks where the bottom of the bucket is supposed to be, a transverse recess is made 12 mm wide and 4 mm deep, at the same distance from the end of the workpiece. The bottom of the bucket is installed into these recesses during assembly.

    The planks are adjusted to each other with their side ends and each one is numbered. For precise fitting, the longitudinal edges of the workpieces are processed with a plane at an angle sufficient to join the boards in a circular manner. To secure the boards around the bottom, a hoop made of a strip of metal or aluminum is used. The width of the hoop is approximately 50 mm. The diameter is slightly larger than the diameter of the bottom, taking into account the thickness of the board itself. The second hoop tightens the top of the bucket and is located at a distance of 10 cm from the top.

    The work of making a bucket, and even a barrel, is very painstaking, but what kind of bathhouse would be complete without it. So be patient! We place prepared planks around the bottom and tie them with twine, making sure that the bottom fits into the recess. Then we put the hoop on top and lower it to the bottom. We make sure that the planks are pressed tightly together. Then we put on the top hoop and... the bucket is ready! If a handle is supposed to be attached to the bucket, it can be made from wire with a diameter of 4 mm and attached to the hoop on brackets or clamps.

    Supplying water to a dousing bucket in a bathhouse

    A factory-made drenching bucket is usually sold already equipped with a water level control system. In most cases, the principle of its operation is identical to the system in the cistern. In fact, the system for supplying water to the dousing bucket is as simple as the design of the mechanism itself. The pipe is brought into the room at the height of the container. The crane cuts in at a level of one and a half meters from the floor.

    A rubber, plastic hose or stainless steel braided tube is connected to the pipe itself. A water level control system (if available) is connected to its second edge. In most cases, it is similar to the mechanisms installed in toilet flush tanks. This completes the simple process of supplying water and connecting the dousing bucket.

    The technology for making a wooden bucket for a bath is presented in the video:

    How to make a wooden bucket with your own hands

    How to make a wooden bucket with your own hands in the form of a small cylinder, we will consider in this article.

    The figure shows a sectional view of the bucket design:

    1.

    Stacked bottom.
    2.
    Typesetting board.
    3.
    Metal hoop.
    4.
    Eyelet for attaching the handle.
    5.
    Handle.

    SET BOTTOM

    It is assembled using glue from boards and slats. Boards measuring 20 x 45 x 225 (mm), in which we mill grooves measuring 5 x 7.5 (mm) in the center of the side surfaces. Planks measuring 5 x 15 x 225 (mm). We compress the assembled shield with clamps and wait until the glue dries completely.

    Article on the topic: How to make a sewer system in a wooden house

    Using a jigsaw, cut a circle from the assembled shield. The end of the bottom is ground around the circumference to size 10 (mm), as shown in the drawing.

    LAYING BOARD

    Let's make it from a wooden plank with a cross-section size of 20 x 45 (mm), grind the side edges at an angle of 10° with an inclination to the center of the bucket. We end all the planks at the same size 350 (mm) and mill a groove from the bottom 4 (mm) deep and 12 (mm) wide. We will make chamfers on the sharp corners of the end faces.

    The number of strips in the example under consideration is 18 pieces. Let's calculate the angle of inclination of the side faces: 360 / 18 / 2 = 10° The angle is an integer; there will be no problems with setting up the processing equipment.

    METAL HOOP

    We will make it from hot-rolled tool strip 3 x 30 GOST 4405-75. Drill holes for M5 threads along the edges of the strip. Screw the corners and insert the tightening screw as shown in the figure.

    Using a nut, compress the edges of the strip to the required size and weld them. Unscrew the screws and remove the device. Finish the seam and smooth it with an abrasive wheel.

    Before welding, we prepare a one-sided joint with beveled edges of the following dimensions:

    • joint width 2 (mm) • joint depth 1 (mm) • joint edge angle 60°.

    HANDLE EYE

    We will make it in the form of a loop from highly alloyed corrosion-resistant wire Ø 5 (mm) GOST 18143-72.

    We will make it from the same wire as the ear.

    Assembly order

    , or how to make a wooden bucket with your own hands:

    1.

    Let's assemble all the planks around the bottom so that the bottom fits into the grooves of the planks.
    2.
    Compress the assembled structure with twine.
    3.
    Squeeze and weld the hoops.
    4.
    We will weld ears to the upper hoop for attaching the handle.
    5.
    Insert a pen into the ears.

    6.

    Let's lower the product into the water.

    After some time, the wooden boards will swell and all the cracks will disappear.

    Master class: miniature enamel bucket

    Materials and tools:

    • thin cardboard;
    • acrylic paints;
    • varnish;
    • napkin with a small pattern;
    • wire;
    • thick threads;
    • wooden bead;
    • second glue, PVA glue;
    • scissors;
    • compass;
    • round nose pliers.

    The height of the bucket without handle is 3 cm.

    Using a compass, draw two circles with a radius of 11 cm and 8 cm. Draw a chord of 7.5 cm along the smaller circle. For the arms, two parts measuring 6 mm by 11 mm, rounded on one side.

    Cut out the bucket parts from cardboard. You can use boxes from tea, oatmeal, etc.

    Use instant glue to glue the part along the side seam.

    Lubricate the bottom with glue so that a little glue goes inside the workpiece, place it on the cardboard according to size and press firmly. It is best to use thick PVA glue or Moment-gel.

    After complete drying, cut the cardboard around the bottom circumference.

    Coat a thick thread generously with PVA glue and glue it as shown in the picture.

    Bend the parts for the arms and glue them symmetrically.

    Use a thick needle or awl to make holes for the arms.

    Paint with acrylic paint. The thicker the paint, the better. For hardness, apply several layers to dry. To avoid brush marks, blend the last layer with a sponge.

    The last outer layer can be any color.

    Decorate the bucket with a design. You can glue a fragment from a napkin; to do this, tear out the design, peel off the top layer and glue it with PVA glue. If the background of the napkin does not match the color of the bucket, then make additional drawings.

    Circle the rim of the bucket with black paint, imitate chips in places, and then apply spots of rust-colored paint on them.

    After the drawing has dried, cover the entire bucket with several layers of varnish. You can use nail polish.

    Make a handle.

    Cut a 7.5 cm wire and bend it into an arc. Make a loop at one end with pliers, put on a cylindrical bead, and bend the other end at a right angle.

    Insert the loop into the hole for the bow and tighten it.

    Insert the second end at a right angle, use round pliers to make a loop and then install it in the hole of the bow and clamp it.

    Fix the bead with glue.

    If you paint it with silver, you get a galvanized bucket.

    Bucket in the interior:

    Enameled jugs are made in the same way:

    Bucket for a bath: we can do without a font

    Rolling around in a snowdrift, diving into an ice hole and being doused with ice water is a classic and ancient pastime of a real Russian bathhouse. However, nowadays there are bathhouses literally at every step, and not every one of them is located on the banks of a river, a forest lake, or, at worst, a city pond. Why is there a lake there? Not every bathhouse even has a swimming pool or plunge pool. Left without a breathtaking procedure? Whatever the case! A bucket for a bath and a desire are the key to the fact that any, even the most unprepossessing washroom can be equipped with its own waterfall, albeit not the Niagara waterfall, in size, but very close to it in feel.

    Simple, like everything ingenious

    A dousing device for a bath, for all its simplicity and, to some experienced eyes, outright primitiveness, is an extremely effective bathing tool. If, while diving into an ice hole, a person plunges into it with his feet, then throwing a bucket of ice water over himself, instantaneous cooling occurs in the opposite direction. However, in most cases the sensations turn out to be close in intensity of passions and a fountain of emotions. A very sharp change in ambient temperature and a sharp cooling of the surface of the body is a very serious shock to the body. How's the classic doing? “Everything that doesn’t kill us makes us stronger.” This procedure, according to some ardent admirers, has the following positive qualities:

    1. Perfectly trains the cardiovascular system. For such a procedure, as for any branded product, they came up with a bright and catchy name - “gymnastics for blood vessels.”
    2. Increases the tone and turgor of the skin, making it strong and elastic. Of course, cold, as an active irritant, initiates increased blood microcirculation and supply of skin with nutrients and oxygen.
    3. Metabolism increases, pressure in the main vessels increases for a short time, and the pulse increases. Any physiological activity forces the body to shed ballast and activate hidden reserves.
    4. As a result, the overall resistance of the body at the immune level increases.
    5. Finally, this procedure is very invigorating, and in this process, it is unlikely to find serious competitors.

    Article on the topic: Why is qsnake banned?

    There are, however, some disadvantages. And the opponents of this action also have a full sleeve of trump cards, read, arguments:

    1. This is a state of shock for the body, and any shock, including temperature shock of different signs, is a difficult test for the heart and blood vessels. If everything is not in order in this regard, you should be careful.
    2. The human head, and especially the parietal part of the skull, is one of the most vulnerable locations of the body as a whole. Therefore, when dousing, you should not forget about this.
    3. A dousing bucket for a bath, if a large amount of water is incorrectly consumed, can provoke the manifestation of cervical radiculitis syndrome, caused by inflammatory processes in the root part of the nerve endings, due to a sharp temperature change or injuries of a purely mechanical nature, from an involuntary sudden movement of the head.

    In any case, living is harmful, but moderation and balance in approaches to any bath procedures are a sign of high culture.

    Briefly about the device

    A bucket for dousing in a bathhouse is a wooden container assembled using metal, preferably stainless, hoops from individual elements - rivets, tightly fitted to each other or connected through a tongue-and-groove pattern, minimizing or completely eliminating the flow of water.

    Important! Due to the loss of cooperage culture, some bath buckets have a polymer insert. To put it simply, we have a plastic bucket in a wooden case. Rough? But, on the other hand, it doesn’t leak.

    In general, the issue of drying out of solid wood structures is very acute. The container should always be filled with water. In modern conditions, this is solved by supplying tap water or water from a well pump into a bath bucket and equipping it with an automatic filling system, with a level cut-off using a float, as in a toilet cistern. Reliable and practical. The main condition is that there is always a positive temperature inside the bathhouse during the cold season, preventing the water from freezing both in the bucket and in the supply system.

    If this is not possible, and sometimes there is simply no water supply system, then the pouring bucket for the bathhouse is filled manually as the water is consumed from it. And the problem of drying out is solved by pre-soaking. 3 - 4 hours before the procedure, the container is filled to the top with hot water so that the swollen wood fills the gaps and the leaks are eliminated.

    A word from Experienced! The leak problem that constantly plagues a wooden bath bucket can be eliminated in a more radical way. It involves waxing. Dry the sauna bucket thoroughly so that the defects are clearly visible. First, beeswax is melted in a water bath, to 3 parts of which 1 part of linseed oil is added and mixed thoroughly for 5 - 7 minutes, without reducing the temperature. We described similar recipes when we talked about impregnations for bath shelves. The method is similar, but the weight of the components and the principle of application are still different. Next, the waterfall bucket for the bath is heated with a hair dryer and all cracks are carefully sealed with a natural bristle brush. After the surface has cooled and the wax has set, the tightening hoops are carefully pushed down with the nose of a hammer until the wax is squeezed out of the cracks. Subsequently, the bucket in the bathhouse, which was stored without water, is pre-sedated with hoops so that the wax appears and filled with water. The foundation will serve as a reliable hydraulic lock.

    It is worth noting that a sauna bucket in itself is not self-sufficient. For the system to work, it must be equipped with a tipper and a supporting frame. The supporting frame, as a rigid structure, is fixedly attached to the wall, at a height sufficient for a tall person to stand under it, on the other hand, to ensure the free movement of the bucket, preventing it from getting caught on the ceiling. As a rule, this distance is approximately 2150 - 2200 mm from the floor level. The rolling mechanism itself can be very diverse, from bearings to torsion bars. The only condition is clear movement in all spatial positions, the impossibility of failure and the availability of quick dismantling for scheduled maintenance of the tank. A shower bucket for a bath, as a rule, has a capacity of 10 to 30 liters, so the fastening and suspension system must be designed to exceed the safety margin by 4 times.

    Article on the topic: How to lay floor tiles in a wooden house

    Which wood to choose

    This question is especially relevant when you are going to make a bucket for pouring into a bathhouse with your own hands. The choice is between very good material and satisfactory one. According to our good tradition, let's start with the good:

    • Oak - has high strength, splits perfectly along the grain, which is very convenient for making staves. The high content of tannins gives the water a light color and a spicy aroma, this is especially pronounced immediately after production; over time, this property naturally fades. Its wood is very resistant to water and is less susceptible to deformation and fungal attack;
    • Ash is similar in its properties to oak, including its unique texture and pattern;
    • Alder - it is also worth considering it as a worthy option if you make a dousing device for a bathhouse with your own hands. To some extent, it splits less well along the grain and is less resistant to twisting during the drying cycle. It is obvious that alder wood is inferior to oak wood in both color and texture;
    • Larch is among the leaders in resistance to the harmful effects of water. It is not without reason that bridge supports and pile structures were built on larch trees. Moderately resinous, difficult to process. Quite often there are through knots - nails, which are very undesirable in the production of cooperage products.

    Products made from linden, birch, pine, and spruce can satisfy the needs of constructing products such as wooden buckets for a bath to one degree or another. If such raw materials exist, then they can be used.

    Attention! In the lengthy discussions of some Internet “experts” one can find recommendations regarding the use of bog oak and bog larch wood. I would like to emphasize that stained wood is obtained from long-term exposure of tree trunks in an oxygen-free environment, completely immersed in water. At the same time, such wood is very rare, very expensive and extremely difficult to process even with modern tools. There is no need to talk about products available on the free market for reasonable money made from such wood. Is it just about banal imitations - the main purpose of which is low-grade marketing hype and making money.

    Material for fittings

    Responsible manufacturers widely use stainless steel when assembling a product such as a tipping bucket for a bath. Stainless steel for baths is used by many and for good reason. The presence of metal elements under the influence not only of the humid environment of the washing compartment, but also of the direct action of water places special demands on corrosion resistance. Hoops, chains, axles, supporting frames made of corrosion-resistant material will last much longer. And this is obvious.

    Article on the topic: How to properly make a pile in a wooden house

    A few words about chains and ropes. They, in fact, operate the dousing bucket for the sauna. The strength and degree of tension allows you to regulate not only the speed of overturning the water flow, but also its volume. On the question of what is more practical, a chain or a rope, the opinions of the bathhouse community are divided. Some passionately argue that the chain is reliable, brutal and colorful, others convince that rope made of flax fibers works no worse in a humid environment, and that it itself is softer and lighter. It may not look so stern and masculine, but it costs several times less.

    Hard or soft?

    Fishing containers come in two types: hard and soft. Each option has its pros and cons.

    Rigid containers are made of durable plastic. It is practical, highly wear-resistant, does not rust, does not become moldy. If necessary, a large plastic bucket can be used to safely transport reels, baits and other accessories. It is convenient to transport caught fish.

    Most models have measuring divisions on the inner side surface.

    When choosing, you should pay attention to a number of parameters:

    • quality of plastic (no chips, sharp edges, no pungent odor);
    • size: the choice depends on the required amount of mixture. Standard production volumes are 17, 25 and 40 liters. In a 17-liter bucket you can prepare up to 2 kg of bait. Experienced fishermen take with them at least three containers of different sizes: separately for moistening the mixture, sifting the soil, final mixing, storing bait balls and other needs;
    • shape: the most convenient are wide buckets with a diameter of at least 50 cm with a rounded edge (it is easy to attach a sieve to it for sifting or rubbing the bait mixture);
    • functionality. Some companies equip products with additional accessories: a sieve, inserts for fishing tools, containers for soaking boilies and mounting PVA sticks, attachment to a fishing chair, and so on. They are usually purchased by bottom fishing enthusiasts, since feeder baits require special mixing care. High functionality significantly increases the cost of products.

    A soft bait bucket has two advantages: lightness and compactness.

    When transporting, it can be stored in a backpack pocket. At the same time, the folding bucket fully retains its functionality.

    Soft containers are made from PVC fabric. Modern wear-resistant material has high tensile and tear strength, good water- and dirt-repellent properties.

    Almost all produced models have sealed welds, which allows them to be used not only for mixing bait, but also for carrying and storing water.

    Soft fishing containers are equipped with lids with Velcro, an elastic band or a circular zipper. The latter type is preferable: it provides additional tightness.

    Important! When purchasing, you need to pay attention to the design of the product. For ease of mixing bait, it is better to opt for models that are equipped with rigid metal spring-type rings.

    The negative aspects include the possibility of damage to the fabric by sharp objects during sea fishing (for example, branches). If in a plastic bucket the bait can be mixed with a drill or screwdriver, in a soft analogue the fisherman will have to do it manually.

    If you make it yourself

    It is possible to make a dousing bucket for a bathhouse with your own hands, but it is not easy. Naturally, this formulation of the question concerns a classic wooden bucket, made in the best traditions of quality and reliability. And if there are no problems with the supporting frame, the hanging and tipping system, standard metalworking techniques are used here for assembling metal structures, then there may be a hitch with the manufacture of the wooden container itself.

    A pouring device for a bathhouse with a wooden container can be made in the form of a simple cylinder with a straight riveting and equal diameters of the neck and bottom, or in the more practical form of a jug, where the riveting is also straight, but the diameter of the neck is smaller than the diameter of the bottom.

    By the way! This design allows for more dosed dousing, but at the same time requires greater effort on the chain or rope. Do you want the effort to be reduced? Make the neck wider than the bottom.

    The most difficult thing is the manufacture of individual elements - rivets, design of the chimney and assembly of the structure, with adjustment to the location. In production conditions, manual labor is replaced by milling processing based on numerical control. This solves a lot of problems, from complex radius cutting to the design of a tongue-and-groove system with a given mating angle. In the conditions of home handicraft production you need:

    Article on the topic: Which batteries are better to install in a wooden house

    • Jigsaw;
    • Hand-held milling cutter with a device for radius milling and a set of cutters, with a shank mounted in a collet chuck;
    • Electric drill or screwdriver;
    • Welding inverter for tension welding of tie hoops.

    The sequence of work is as follows:

    1. In a calibrated board 20x50x250 mm, in the center of the side surface along the entire length, we use a cylindrical cutter to make a 5x8 mm groove.
    2. We produce planks 5×15×250 mm. they will play the role of a double-sided tenon, which will fit into the reciprocal grooves of the boards.
    3. We assemble the shield, carefully gluing the joints with polyvinyl acetate glue. We tighten the shield with clamps and leave it under tension until the glue completely polymerizes and gains the necessary bonding strength.
    4. On the plane of the shield we mark a circle according to the estimated area of ​​the bottom.
    5. Using a jigsaw, cut out a circle along the contour. For this operation, it is convenient to use a blade for figured cutting, which has a smaller tooth size and pitch, as well as a smaller width relative to a standard cutting blade.
    6. The edge of the circle is processed with a profiling cutter to a thickness of 10 - 12 mm.
    7. We make a typesetting strip for the walls of the bucket. Its dimensions should be within 20×50 mm and a length that determines the height of the bucket. The side of each plank should be cut at an angle of 10 degrees, directed inward. Trimming can be done with the side edge of a cylindrical cutter, having previously given the angle to the workpiece using substrates of the required thickness.
    8. At the bottom of the planks we mill a 5x11 mm groove at the same distance from the edge, approximately 25 mm
    9. We collect all the planks around the bottom, stuffing them “pull” onto its edge. You can temporarily unfasten the set using twine.
    10. From a metal strip 30x2.5 mm we tie the set from below, determining the length. Let's cut it off. At the edges of the future hoop, we drill two holes on each and screw two corners with a hole in the shoulder in the middle, into which a tightening bolt is inserted. We bring the edges together end-to-end and weld. We repeat the operation for the middle ring and the top one.
    11. We weld or screw metal ears on the top ring.
    12. We place the hoops on the bucket, tapping them evenly with the nose of the hammer, avoiding distortions.
    13. We process chamfers on sharp edges.
    14. Check the bucket for leaks. If necessary, wax or soak.
    15. We fasten the bucket on a suspension, equipping it with the necessary fittings to fit the location.

    Considering the prices for industrially made buckets, especially if you have wooden blanks, the necessary tools and desire, then it’s definitely worth a try.

    What is needed for a “Russian shower”?

    The improved “Russian shower” attracts with its ease of use and design simplicity. Surely, the craftsmen examining the finished cooperage product had thoughts about applying their own efforts. Without a doubt, it’s easier and easier to buy, but it’s much more interesting to tinker with making it yourself. The process is extremely exciting, and the result can be boasted to your guests. And a considerable amount is saved, because high-quality models of dousing buckets are quite expensive.

    We found out that to assemble an extreme shower with our own hands we will need:

    • wooden container with a capacity of 10 to 40 liters;
    • brackets capable of supporting the weight of a water container;
    • preferred type float valve;
    • metal rod - a piece of smooth reinforcement grade A3. The diameter of this rod can be from 8 to 14 cm, because the size depends on the calculated weight of the dousing device filled with water;
    • ball valve;
    • a piece of flexible hose.

    You can purchase the entire list in a store and, by drilling three technological holes in a wooden bucket to install a metal axis and a float, you can quickly and easily make a dousing device. You can buy only that part of the mini-shower parts, which is pointless to do with your own hands. The home craftsman has economic justification for showing skill in making brackets and containers. So we will discuss folk methods of their production.

    Rating
    ( 2 ratings, average 4.5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]