Tree of love made of beads: do it yourself! In the shape of a heart!

Home » Trees » Romantic tree heart made of beads - a real amulet with your own hands

Trees

Irina Vyshivaikina 08.08.2019

All girls want to create a unique wedding style. Craftswomen make jewelry with their own hands. Recently, the heart tree made of beads has gained popularity. It can be made to match the color of the celebration and it will beautifully shimmer with all the colors of the rainbow.

DIY love tree

In this master class, we will learn how to make an original and at the same time quite simple to make “tree of love” in a fairly short time.
This wonderful fake will fit perfectly and refresh any interior and bring a ray of joy and sunshine even on the cloudiest day. For work we will need: - Wire - Brown tape - Scissors - Pliers - Wire cutters - Cardboard - Pot or any other container - White thread or twine - Plaster - Pink paper - White beads - Pencil - Hot glue - Decorative flowers white and pink – Decorative leaves – White sisal

To begin with, we take the wire, in this case 15 pieces, and tape.

We cover the wire with tape, leaving the ends of the wire that are not taped off, approximately 5-7 cm long.

Then, using pliers, bend the un-glued ends approximately 90°.

We form a trunk from the finished sections.

We dilute the plaster with water so that the solution has a consistency no less than liquid sour cream.

While the plaster hardens, we move on to the hearts.

We cut out hearts of the required size from cardboard, 30 (to ensure that the hearts are even and the same size, you can use a template).

The next step is to decorate the tree.

We take decorative leaves and flowers and decorate the trunk and branches.

Source

Master class on weaving mimosa

A traditional and at the same time not trivial gift for March 8th is a mimosa. A beaded mimosa tree will be an excellent gift for loved ones who appreciate your handicraft.

For work take:

yellow and green beads;
wires for weaving of three different diameters;
tape;
acrylic paint.

Description of work:

Place 13 yellow beads on a thin wire. The length of the wire is 67 cm. The beads should be 5 cm from the edge. Make a loop, twist it in a figure eight, then bend it and press it tightly. You will get a round inflorescence with a cross at the top.
Cast on 13 beads on the long side and make a second loop. And twist it the same way. There should be 12 such inflorescences in total.

Holding the last inflorescence, place the remaining wire along all the inflorescences and twist them together. Place the inflorescences in a circle, randomly. You should have 36 yellow tassels.
Take a thicker wire and place 16 green beads on a 30-centimeter piece. Pass either tip through the last bead. Pull it all the way out to form a loop.
Under the loop, attach 86 cm of wire of the thickest diameter. Place 18 beads on it, secure it to the central wire, and form a loop. Do the same opposite. Weave 9 rows of loops. In the 10th row the loops should be made of 16 beads. In the 11th row - out of 14.

Collect the branches: attach 2 inflorescences from the edge to a thick wire. Wrap it with tape and attach 1 more inflorescence. There should be a total of 4 inflorescences on the branch, and there should be 9 such branches.

A large branch is collected from 3 branches; there should be 3 large branches. Connect the 2 branches together, wrapping them with tape. Attach 1 more branch a couple of cm below. Wrap the entire trunk. Bend it slightly.

All that remains is to fix the tree in an alabaster solution in a container.

Love tree

Many people are fond of beadwork, because almost anything can be made from it! Today I will introduce you to making a Tree of Love from beads. For this we will need floss threads, beads and wire 0.3 ml (all in two colors) and scissors.

At this stage, we will need red wire and beads, and we will put the white color aside for now. So, cut off 15 cm of red wire and put 5 red beads on it. Move them to the middle and twist them as shown in the picture.

Now we again put 5 beads on one end of the wire and twist it.

We put 5 beads on again, only now on the other end of the wire and twist them.

We repeat all this until our branch has 4 petals on each side. We will need 15 of these.

Working according to the same scheme, we make 32 more things, only they should not have 4 petals, but 3.

For one branch we need 3 large branches and 6 small ones.

Now take white beads and white wire. We should have 32 small branches and 15 large ones. In the end it will be like this:

It's time to start forming the main 5 branches. Here's what we'll need:

To make our branch plump, cut about 50 pieces of 10-centimeter wire. Take a wire 0.4 ml thick. Let's start forming the branch. We take a twig that has 4 petals and wrap a piece of wire to it with floss threads.

Now we take a branch that has 3 petals and wrap it to the main branch. We attach a piece of wire and wrap it. The distance should be small, approximately as shown in the figure.

Do not forget to thicken the main branch with pieces of wire after every 2 branches. Add branches that have 3 petals. On each side you should get 4 branches of 3 petals. The last fifth branch is taken from 4 petals. This is the big branch you should get.

But we will have only one such large branch, we will make the remaining 4 branches without 1 branch (on each side) from three petals. But the last branch must have 4 petals. We will have 5 branches, with the largest branch in the center. We repeat everything with white branches.

Take the largest branch and tie a branch to it

We wrap each branch at a distance of approximately 3-4 centimeters. We do the same with white branches. It will turn out like this.

Results of the process of creating a tree from beads

Congratulations on your first beaded love tree! Next time you can repeat the craft, but experiment with the type of tree, add branches, or use completely different decoration details.

A tree of love can be created not only from the heart.

Change the theme to marine or steampunk by adding shells or gears - then your creation will acquire a unique twist.

Have any of you already tried to weave such a tree? Share in the comments!

What does the tree of love look like?

There are three most popular forms of this fake: regular (bonsai), heart-shaped, and with a round top.

common tree

This is the simplest option, but, nevertheless, it leaves the most room for imagination. The product is made like an ordinary tree from wire and beads. You can create a tree of love if you decorate the craft with ribbons, large beads, hearts, and cupid figures. It is then completed with additional elements at the author's discretion.

Heart shaped tree

This design is formed from two parts - branches or trunks. They can be made of beads or third-party materials. At the top they bend towards the center, forming a heart. You can use beads of different colors to weave each branch, for example, blue and pink.

You can make a photo frame in a similar way. To do this, one of the branches is left straight, and the second is bent to obtain the desired shape.

Round top tree

In this case, a ball made of thick aluminum wire is attached to a barrel (or several). It can then be braided or decorated with beaded flowers, leaves and hearts.

It is not necessary to adhere to any framework: you can come up with the shape of the product yourself.

Making leaves

Cut pieces of wire to form the leaves, and bend it at the ends so that the beads do not slip off. Place beads on the wire, up to half its length. Make a bend at the other end of the wire.

Fold the wire in half, matching the ends, and even out the number of beads. Make a bead loop by twisting the wire several times. Move the remaining beads to the side. You get a leaf - a loop on a stem. Step back a little, make another loop like this, and you will get two loops at a distance that you choose yourself. The number of leaflets - loops is optional, but they should be distributed evenly. When you have finished weaving the leaves, cut the wire.

The result is a beautiful branch of beads. Make a lot of these branches so that the tree takes on a lush shape.

Preparation of tools and materials

To ensure that the work goes smoothly and you don’t have to be distracted by searching for the necessary equipment and consumables, prepare everything in advance.

You may need:

thin wire;
thick aluminum wire;
beads of the required colors;
large beads;
wire cutters;
pliers;
scissors;
floss threads;
colored paper;
alabaster (plaster);
water;
bowl for preparing the solution;
PVA glue;
quick-drying varnish;
sisal fiber.

Depending on the chosen technique and personal preferences, additional materials may be used.

Weaving technique training

Since there is a huge number of different trees, therefore, the scheme and design of each one is special, individual.

Before preparing, let's take a look at what tools and materials are needed for the job!

Wire (thin for branches and thick for trunk).
Beads.
Yarn, tape.
Acrylic paints.
Varnish.
Gypsum.
PVA glue.
Scissors, nippers.
Decorating elements - pebbles, floral moss, figurines, pearl beads, seed beads.
The container where the structure will be located.

For needlewomen, many creative schemes have been invented, with the help of which you can design whatever you want.

Weaving patterns

Beading is not the only technique used in the manufacture of such crafts. Therefore, the “Love from Beads” tree diagrams used to make trees are useful only for individual elements. Working on such a complex piece is easy and fun - it really is the best way to represent love with beadwork.

The following diagrams will be useful:

Petals

Hearts.

Beautiful trees of love and fidelity

There is a sequence of formation and in order to achieve the goal, you must first have patience, perseverance, attentiveness and, of course, not miss the advice of professionals in this matter.

In yin-yang style

It is created by intertwining with each other, from two small intertwined similar options. Moreover, you can come up with two colors yourself, in this case black and white. Its originality lies in the fact that the trunk does not need to be painted or plaster, but only wrapped with threads. Then you need to place it in a round stand, strengthen it with plaster mortar and decorate it with the same beads. The technique is suitable for beginner needlewomen. We invite craftswomen to create a yin yang here by studying a step-by-step lesson.

Happiness made of beads and stones

Such a tree is believed to bring health, happiness, love and prosperity. If you use expensive stones in the structure, beads or beads that attract with their beauty and brightness, you will end up with a tree that attracts good energy and happiness will come in life. The most commonly used stones are rose quartz, aventurine, turquoise, sapphire, granite stone or mother-of-pearl plates.

Let's look at a simplified weaving method. First, 5 pieces of twigs with seven pebbles are created from wire - for the top. For the second tier - 8 branches with nine jewels and the third tier, consisting of 12 branches with eleven stones. Next, the clusters are connected to each other in groups and great “happiness” is formed. The roots are separated to the sides in the form of rays, then twisted for a stand. In conclusion, the created creation can be decorated in different ways: on a wooden stand, decorated with decorative moss, or plastered in a shallow container and the surface decorated to your taste. Follow this link, where you can easily take a master class on weaving a tree of happiness.

Cherry blossoms

Sakura is the national symbol of Japan and the structure of the flower consists of five petals. The Japanese believe that each of the petals has its own purpose - health, prosperity, peace in the family, joy and love.

Sakura made of beads, alluring with its appearance, has never left anyone indifferent. Japanese style will perfectly decorate your home with soft pink shades and add warmth and friendliness to your guests. You can make it using a lush and bright loop method, or you can give it less volume, then the sakura will turn out delicate and fragile, or using French weaving, that is, creating large flowers using circular bead weaving

You can learn about making trees from a step-by-step description of various options for weaving sakura and final arrangement on a stand, decorating in a variety of ways

How to make a love tree?

This craft is a personal vision of the craftswoman’s love. Therefore, only she decides what it will be: simple, classic, for example, in the shape of a heart, or more complex, abstract (with a round top, as in the example below)

Before weaving a tree of love from beads, you should prepare your workspace: clear the table, cover the surface with a plain, smooth cloth or paper. Select convenient containers for beads and seed beads and sort them by color.

Making a barrel

This part of the product must be both strong and flexible so that you can easily give the tree the desired shape by bending the trunk. The structure is made from pieces of thick wire of the same size. A bunch is formed from it and twisted so that they are tightly intertwined.

A few “loose” pieces of wire should be left at the top and bottom of the trunk. This is necessary to support and secure the crown.

The number of such “bundles” depends on the desired size of the craft. Subsequently, you can weave a braid from them, this move looks original. The finished trunk is bent to give the desired shape. Then the trunk is wrapped with floss threads or wrapped in paper of the appropriate color.

Materials required for work

Prepare a strong and thin wire so that it does not break when bent and can fit into the bead hole. To work you will need wire cutters or pliers.

For needlework you will need large beads. Small beads will be lost against the background of the tree itself. The craft is made from parts of two shades, and the choice of colors depends on the needlewoman.

Colored wire is used to braid the stems, in our case it is silver and golden shades. If desired, these colors can be replaced with others.

For needlework you need a stand. Use a piece of real wood, special flower biomass, beautiful containers or pots for it. The master class uses a pot that needs to be decorated with jewelry or beads.

Decorating the trunk is done with acrylic paste and acrylic paint. The thickness of the trunk is formed using braided wire. All these materials are sold at any hardware store.

DIY “Tree of Love” for Valentine’s Day

To make a “tree of love”, call on your imagination to help and look around: is there anything suitable at hand? For example, you may need materials such as scraps of fabric, satin ribbons, colored paper, cardboard, crepe paper, beads, buttons, wire, beads, paints, varnish, glitter, polymer clay, cold porcelain, salt dough, tree branches, etc. etc. Don’t forget to also look for a suitable pot for the future craft, and if you still can’t find one, feel free to use cans from canned food, old cups, glass jars.

"Tree of Love" made from twigs

Making such a craft does not require much experience in needlework, and therefore the idea is perfect for beginners. You will need only the simplest materials and tools for your love tree: a pot or jar, building plaster or small pebbles, branches, paper or felt hearts of different shades of red, decorative ribbons, scissors and glue or a needle and thread.

Make a “bouquet” of branches, forming the base of your tree. The size and shape of such a base can be arbitrary. Place the “bouquet” in a pot or jar, fix it by filling it with plaster (dilute dry plaster with plain water to the consistency of sour cream) or cover it with small pebbles. You can pre-decorate the pot or jar at your own discretion.

MK: topiary made from coffee beans

Before you start making a tree, make sure that the coffee beans are suitable. Preferred beans are good, high-quality coffee, evenly roasted and even.

The tree will need a base, which can be purchased or made. So, you have decided whether it is a heart or a ball. The base, if it is already dense, is immediately coated with paint, which will merge with the grains. If you want to make a ball with your own hands, carefully remember the paper to make a lump, tie it with threads, giving the lump the shape of a ball as much as possible. If you decide to make a heart, a foam blank will be more convenient.

Coffee topiary (photo master class step by step)

A foam blank or any other base is covered with paper, wrapped with thread and painted

In order to make a trunk (what would a tree be without a trunk), you can take either thick wire or a sushi stick; some even use paper towel tubes. So, the selected rod needs to be made into a trunk. It can be wrapped with satin ribbon, twine, corrugated paper or tissue paper

The trunk must be glued to the crown. Initially, you can make a small hole in the workpiece to fit the diameter of the barrel. Fixation with glue must be strong and neat

Next, make soil that a cup or disposable glass can hold. How to make primer correctly can be seen in numerous MK videos; this will not be superfluous if you have never worked with gypsum. The volume of liquid is measured by the container where the coffee tree will stand. In this case it is a glass. After preparing plaster or alabaster, it is poured into a container. The container should not be filled to the very brim, since the top will still be decorated. Insert wood into the plaster in the center and wait for the mass to harden.

The base is smeared with glue, after which coffee beans are fixed on it. This is often done in two layers. One layer - flat side inward, the other - vice versa

While the glue dries, you can prepare a stable base in the form of a glass cup (you can also use a regular jar), partially decorating it

The topiary must be placed in a cup, gluing it to the bottom and filling the cavities with coffee beans, coating each layer with glue

After everything has completely frozen, you can cover the top layer with layers of coffee, or, for example, shavings or sawdust. Decor for the tree is done at your own discretion