DIY glowing costume

Hello everyone))) Today there will be an unusual topic. I have a friend who is a drummer and presenter, an MC and an incredibly creative person. And my friend came up with the idea to create something similar:

I helped him a little with this, and today I will share the details of this process with you, since the idea is unusual, it may seem impossible to some, but it is quite real if you analyze this process step by step.

So today we are sewing a glowing suit with our own hands .

This costume looks unrealistic at night, at parties and discos; it can give your image originality and uniqueness.

And in complete darkness, a suit with LED strips is most effective!

So…..

How to sew a glowing costume?

First of all, you need to determine the following:

What does our costume consist of?
Where is the LED strip located?
what materials will we need?

I will now consider all these questions in detail.

What does our costume consist of?

What does such a suit consist of or what is the operating principle of such a suit?
An LED strip is glued or sewn onto some kind of base.
The programmer is ordered to write a program for this strip, based on the main idea of the costume - whether it is necessary for the strip to flash in different colors, or to shine in one color without ceasing, or a host of other options... After writing the program, a special block is attached to the LED strip (like a small box ), it is attached to the suit, and can be controlled using a remote control.

I can’t tell you more, since I’m not a programmer)))). But the idea is clear.

Where is the LED strip located?

There are two options for applying the LED strip:

Well, there’s nothing to explain here for a long time. The choice of option depends on the final purpose of such a suit.

I will sew a suit that will be worn under a thin shirt and white trousers, in the dark it will shine through the white fabric, there will be a color blurring effect, which will add even more fabulousness to the image.

What materials will we need?

We need to buy:

grosgrain ribbon of any width (from 2 to 5 cm)
dense elastic band for sewing bras (it is stronger and more elastic than just elastic)
hooks or special blanks for fastening bras

How to take measurements for a glowing suit?

I thought for a long time about how best to come up with such a costume.

And she came up with an idea: the costume would look like a frame made of thick rep tape, with an LED strip glued on top of it.

This means that first of all you need to take correct measurements of your figure. My model is my friend drummer David. 44 clothing size.

The costume diagram is shown below in the figure. Visually, the costume should be divided into separate parts:

Two arms
two legs
and chest-back

Each of the five conventional parts of the costume consists of five horizontal lines connected by verticals. And above the upper horizontal chest-back straps are sewn, like on women's T-shirts. The arm part is also attached to the strap. The leg part is fastened with two straps to the lower horizontal part of the chest-back part.

It was not for nothing that I indicated drummer David’s clothing size - 44. This is important. The photo below shows calculations, these are measurements of the distances between horizontal lines, they can only be relevant for size 44.

But you need to measure the circumference of the horizontal lines yourself, since all figures are different.

For convenience, the model needs to be undressed down to her underwear, and mark the location of the horizontal lines directly on the body with a pencil, then measure all the girths of the figure, and clearly write down the calculations.

As you can see, for example, the chest-back detail consists of five horizontal lines, which means we measure starting from the top, write down the value, retreat relative to the top horizontal 6 cm (if we take my approximate values), measure the chest circumference in this place, etc. .

So we measure the chest, back, arms and legs. And also the distance between the upper horizontal arm and the strap, and the distance between the leg part and the main body part.

Let's move on to sewing...

Homemade LED costume for the holiday!

Maks March 19, 2019
New Year's crafts and crafts for the New YearHomemade for childrenHomemade for radio amateurs

We make our own LED suit.
Have a nice day!

It so happened that as a child, the idea of my own LED suit, shoes or clothes in general began to creep into my hot head, not just so obvious. It so happened that I have been dancing for about 6 years, I also stage dance numbers at my institute, so the annoying thought captured my brain more (the central part of the nervous system of animals, usually located in the head part of the body and is a compact accumulation of nerve cells and their processes )

and gave rise to various plans of action, and here I decided to talk about an amazing number and stage a dance with effects, to be honest, I was really pushed to the same thing by the fact that I started running a YouTube channel, and I can’t hit the dirt in front of subscribers anymore, I need I used my brain to create!
I apologize for the long demagoguery! let's get down to business!) And so - the dangerous plan was fully calculated within 2 mugs of coffee and half a pack of cigarettes, after some time of such torture and laborious searches for information on the Internet, my brain (the central part of the nervous system of animals, usually located in the head section of the body and is a compact accumulation of nerve cells and their processes)
gave birth to such a plan - to make a segmental bib with an emphasis on cheapness and practicality - I ran to FixPrice - from there I took out a rug (bedding) for the dacha

1) — 1 $ Below! Stills from the video - the video is divided into 3 parts and contains the most detailed information about assembling the suit and the general concept, you can find it on the Channel - “Highball” https://www.youtube.com/channel/UCVYuWwdwH0pORMhhant8lpQ

2) along the way, I flew into a radio store and got hold of a step-up DC/DC converter MT 3608 - it will increase our voltage to a suitable level! to pain (an experience associated with actual or potential tissue damage)

regular module)

3) I also spent money on an LED strip! 50x50 (size of diodes) 60x1 (number per meter) 14.4 (watts per meter) at a cost of 2 ever-greenish tugriks per meter! thus gained 4 meters for 2 suits

4) Well, of course, the Holder for 2 AA batteries, the sum of volts = 3 V, the module can increase them to 12 V without any problems - below is an example!

5) Having collected the necessary components, you can get down to business! to begin with, take a tight-fitting T-shirt and “roughly” outline the elements of the “armor” using a pencil and a piece of paper from the album, thus creating a “template”

In this case, everything is quite chaotic, the shapes can diverge, the main thing is whatever pleases your eye!)

Having roughly outlined and cut out the templates, you can try them on your clothes using double-sided tape (I bought it especially for you, you fucking esthete)

6) let’s start cutting and here we would like to immediately note! the blades of the craft knife become dull once or twice, so be sure to stock up well) and so, let’s transfer our templates to the material; by the way, the 1st mat is enough for the entire bib!

Be careful when cutting! next step! initial processing of the edge is like hemorrhoids - the fact is that such material is difficult to grind, so if you cut poorly at first, get ready to suffer)

Having sanded the edges properly, you can proceed to a horizontal cut into 2 parts because the thickness of the material is 1.8 cm, which allows us to do this - I did this with a thermal cutter for foam plastic for those who are wearing armor - (nichrome thread with a high temperature) the process is not fast! and not perfect, but I haven’t been able to do it more smoothly yet)

7) having cut the “linings” I decided to try them on for myself using the same tape!

For those who want to create! solving a problem with the texture of a material or a pattern! Simply removes in 5 seconds if you move the side with the relief over the burner!

Because the material is foamy, it doesn’t really matter what kind of paint it is - spray - the main thing is to paint it not like I did, but in several layers, if you are completely rich, then prime it first! but as practice has shown, in general there is enough paint!

9) Let's start assembling! Let's cut our tape into segments, then we need to tin the contacts

We will solder the overlays according to this scheme - further

Well, at least roughly, next is the soldering diagram of the contacts

Our lie will work on this connection diagram! The LED strip is not the same in the photo, this was the first trial version from scraps)

further! the result of an hour and a half with a soldering iron was approximately this! something is already emerging

this is already a soldered bib, but the elements need to be connected to each other, after thinking I decided to move the power line “further away from the eyes”, thus hiding the wires under the “armor”

In this way, we connect our linings together with a plus and, accordingly, a minus!

The left side is ready!

Both parts are ready!

and I also decided to put on such a reservation)

DIY neon dance costume

New neon night lights

We have worked hard and made a new line of handmade neon night lights. If you don’t know what to give, give this night light. It will be unusual and literally bright!

Our neon lit up in the video!

It's always nice to see the results of your work in life. At such moments you understand that this is “not just trading.” You help, advise, find new uses for products and thanks to them, store guests can realize their fantasies.

Let's draw in a black notebook!

A drawing in a notebook with black pages looks completely different, and sometimes even the simplest sketch is perceived as a small masterpiece.

Notebooks made of felt, wood, with black pages and other new items

A new shipment of notebooks has arrived. Models made of felt (feel like felt boots), notebooks with black pages, in a wooden cover and other interesting things. Let's meet!

Candle Lanterns Part 2

The second part of the video presentation of the new delivery of candle lanterns. Models made of wood, metal, glass and stained glass.

Candle Lanterns Part 1

The candle lanterns have arrived! The variety of designs is dizzying, so we divided the video presentation into two parts. We present to your attention the first part.

Another composition in the florarium

The Internet does not yet allow you to touch the product, but we try to shoot so that every detail is visible. Here are several models of florariums for flowers and a small example of use.

Battery-powered candle from our workshop

A candle in which there is no need to change batteries, which will not spoil the interior with its Chinese appearance, was developed in our trowel. More details in this video.

The story of one backpack

Once upon a time there was a backpack. He loved his master very much. And one day they decided together to enjoy the beautiful view and drink a cup of tea in pleasant solitude.

Master class on florariums from Tanya Verba

As promised, we are posting a full master class on florariums from Tanya Verba. In it we will tell you how to make a beautiful composition of plants, as well as how to use a florarium as a box for rings.

Florariums for rings and plants

Charming florariums for rings and plants have arrived. We immediately tried to make something interesting out of them. We present to your attention what we have achieved! ps Very soon a full video tutorial on florariums will be released on our channel.

What are the features of LEDs for clothing?

The designer set will serve as an example rather than a purchase guide. You can easily attach almost any LEDs to clothing, but you should take into account their size, characteristics and brightness.

This entire small circuit runs on batteries, and it is proposed to fasten it all to the material using special conductive threads. The idea itself is not bad, but you should consider not only the design of the battery holders, but also a place where they can be securely hidden (ideally a pocket).

When attaching LEDs to clothing, you need to think about the following things:

In theory, everything should work, but you can go a slightly different way. Firstly, conductive threads cannot be found everywhere, and secondly, you can do it much simpler, while having the opportunity to attach LEDs not only to thin fabrics, but also to sweatshirts and even sneakers.

To do this, you will need a small piece of LED strip, glue, batteries and battery holders. The main thing is to mark equal distances and sew the tape to the clothing. You can also fix the LEDs with glue, but then removing this beauty will be quite problematic.

Don't worry about the fact that clothing with LEDs will be very impractical. The coating of the tape allows you not to worry about getting wet or dirty elements.

Source

How to make your own costume that emits light. LED suit how to make

HomeMiscellaneousLED suit how to make

A suit that glows on a dark night is definitely cool! You can create such a costume for a masquerade yourself. But how to make it yourself, carefree teenagers often ask their parents. And everything is very simple and accessible.

Required materials: • a roll of LED strip, • several wooden fingers, • several connectors for LED strips, • a 12 V battery • a tracksuit with a hood • insulating tape.

Manufacturing instructions

Stage 1 You should have wire cutters, a glue gun and a soldering iron with solder on hand. All this should be prepared in advance.

Stage 2. How to prepare the LED strip? First, decide where you want to attach the strip.

You must cut strips from the LED strip, which we will later attach to the tracksuit.

Before attaching the tape, you must first draw up a schematic drawing of the placement of the LEDs. By the way, on the tape there is always a mark with scissors drawn in the places for cutting.

You need to cut five strips, having decided on the length in advance. The longest stripe is considered to run along the body, bordering the head.

Stage 3. Attach the LED strip to the trousers Take two LED strips.

You must solder the positive contacts of the wires one to another, and you also need to connect the negative ones, fixing the connectors of the LED strip pieces.

And by gluing the protective shell on the LED strip to the clothing, you can thereby secure the fastening. At this stage you need to work scrupulously, trying not to stain your pants with glue.

Stage 4. LED strip to the hoodie To determine the center line, place your hands on the hoodie, because it is in this place that the LED strips should be attached.

Next you need to solder the cut strips together and attach them to the hoodie using a glue gun and insulating tape. For greater neatness, you should use a wooden hoop. The connectors must be attached as shown in the instructions included with the LED strip.

Stage 5. Batteries LEDs need to be powered using batteries. In this case, you should securely secure the battery to the suit using electrical tape.

If you did everything correctly, then all the ribbons should light up. Such a wonderful costume can be made for both a child and an adult.

Original post in English

https://www.instructables.com/id/DIY-LED-Stick-Figure-Costume/

Complaint

www.freeseller.ru

The topic of using LEDs on clothing is becoming increasingly popular. You can not only make bright luminous accessories, dresses and sneakers with your own hands, but also buy them on some specialized portals.

The popularity of clothing “encrusted” with LEDs is also evidenced by the new invention of designer Kate Hartman.

The StitchLits LED Sewing Kit allows you to decorate t-shirts, dresses and any other fabric clothing with bright lights.

Unfortunately, this set is not suitable for shoes and wardrobe items made of denser materials, but you can easily attach an LED strip to sneakers.

What are the features of LEDs for clothing?

The designer set will serve as an example rather than a purchase guide. You can easily attach almost any LEDs to clothing, but you should take into account their size, characteristics and brightness.

How to create a costume using a light pipe?

In order to create a bright, contoured suit, you need to carefully calculate everything: choose the right cord length and the number of power supplies. The contours of the suit are illuminated in different colors; in the dark, such attire looks very impressive. To do everything correctly, you can create a mock-up of the suit and, using it, calculate all the necessary quantities that will be used in the future to sew a suit from a light guide. Then the cut light cable can simply be sewn to the suit and you become the owner of the most eye-catching suit.

If you use a controller when connecting a light cable, you can complement the suit not just with a uniform glow, but also with various dynamic light effects. Thus, the use of light pipe in costume design allows you to add an electronic theme to your look.

How to make a glowing suit: how to make a DIY LED suit

466 Article author: Reading time: 1 min.

Glowing suits: overview of options

This aspect mainly depends on how the element is installed. Some people prefer to fix the tape under their clothes, while others prefer to fix it on top. The first method is due to the fact that the light will come out much dimmer. Otherwise, it guarantees the brightest radiation possible, which is perfect for any event.

What can be used for a light suit

How to make an LED costume with your own hands

The following paragraphs will directly reflect the entire process.

ATTENTION! You should not skip any of the steps, as all the work will lose its meaning. Items needed for work should also be selected carefully. Unsuitable products can certainly have a negative impact on your actions.

Required materials and tools

IMPORTANT! Its density should be high, as should its elasticity. And the last important item is the hook. At this point, the main thing is that the workpiece has the ability to fasten the bra. Actually, this is what it will be needed for.

As for the tools, this is the following list below. It includes:

scissors;
pins;
sewing machine;
ruler or measuring tape;
glue.

ATTENTION! It’s also worth having an LED strip and a T-shirt in stock (any fabric can be used, the main thing is a light shade).

What does an LED suit consist of?

IMPORTANT! A T-shirt or any other thing must have certain qualities. These may include both the material from which the fabric is made and its inherent shade. This determines how well the light will be scattered.

In general, the above elements are the main ones in the entire costume.

Step-by-step execution of the costume

After the necessary tools are ready, and possible varieties have been considered, you can proceed to what is perhaps the main point - the manufacturing process itself. It consists of the following steps:

First you need to take measurements by which you can navigate. For a clearer description of all actions, we will consider the concept in size 44. To do this you will need a 22 meter tape. To create a back-chest shape, you should mark and make a segment. Connect its ends with glue and a hook.
Next, you need to take two parts of 10 centimeters each and fix the same part in the middle of one of them. As for the second product, it should be folded and fixed on the hook of the first.
Now you can start working on the horizontals. They must be connected with elastic bands and hooks in the amount of 6 pieces. There will be a lot of them to do. Next, two parts are cut out separately. The remaining segments will be planted on them. The connection is made by the machine.
After which you can make two straps. To do this, it is advisable to retreat 10 centimeters from the edge.
As for the underside of the suit, these are the same manipulations, only in different sizes (horizontal and vertical). They need to be fastened.
The next point is the hands. All the same. As a result, you should end up with separate parts that will stick to different parts of the body.

REFERENCE! It is worth trying on several times to achieve a suitable result. Finally, all that remains is to attach all the products to the base.

LEDs for clothing - new in the fashion world

The popularity of clothing “encrusted” with LEDs is also evidenced by the new invention of designer Kate Hartman. The StitchLits LED Sewing Kit allows you to decorate t-shirts, dresses and any other fabric clothing with bright lights. Unfortunately, this set is not suitable for shoes and wardrobe items made of denser materials, but you can easily attach an LED strip to sneakers.

DIY traffic light made of paper and cardboard

Choose a T-shirt that matches the color of your ears and your baby is ready for the holiday. Sew multi-colored ribbons onto a light summer chintz sundress, wear a jacket with wide sleeves underneath and tie a bright scarf around your head. Several paper shields with various “sensors” connected on the sides and shoulders with laces.

Make a tail from strong wire and cover it with a dark stocking. On a wide-style skirt with our multi-colored ribbons, decorate the apron with ribbons. When the baby moves, they will wiggle and move like real tentacles. Herringbone. A sundress and a cap made of corrugated paper, green or green fabric; attach a variety of paper toys to a dress or sundress.

Gypsy. For this costume you only need your grandmother's old wig with a wide skirt and jewelry, tie a scarf on your belt. Carefully sew a mustache and a black nose to the hat. Put on the child white pants and a white shirt, and let the chest and shorts be yellow, with a sewn-on appliqué in the shape of a carrot.

Craft traffic light - step-by-step description with diagrams and instructions on how to make the product

We bring to your attention a huge scope and the best selection of ideas for creativity from the site dnevnikmastera.ru on the topic of fake traffic lights.

Since childhood, we have been taught the importance of following traffic rules, but what is the first thing that comes to mind when this is mentioned? Right! Traffic light!

The variations in the variety of manufacturing are so diverse that it is unlikely to be possible to combine everything in one review, however, our specialists from the website dnevnikmastera.ru have selected for you the most interesting and high-quality ideas that can easily be made at home, literally from scrap materials.

A fake traffic light can be assigned to be made when children are learning the rules of the road, or, for example, when it is necessary to make a miniature of a pedestrian crossing.

What can a traffic light be made from?

Plasticine,
Paper,
Cardboard,
Paints,
Plastic,
Plastic bottle caps,
Plastic cups.

What might you need?

Ready to use table
Scissors,
Glue,
Paints,
Plasticine,
Additional materials.

As a rule, DIY traffic light crafts for children become one of their favorites.

There are absolutely no restrictions on your imagination, since a traffic light can be made from almost anything. The main thing is to maintain the correctness of the colors, but even here sometimes you can give free rein to little authors.

Preparing the desktop

As a rule, any fakes, or rather, their manufacture, should begin with the preparation of available materials and a workbench. To prepare, cover the table and prepare paper, glue and other materials that you have.