DIY pyramid. Practical application in all areas of life. Properties. Proportions.

The pyramids are one of the seven wonders of the world. At all times, people have attributed mystical properties to them. And even now, many tourists visiting Egypt strive to see this architectural structure, touch it, and feel their energy.

Many people are convinced that only thanks to their ideal geometric shape, they can accumulate energy, which has a beneficial effect on the human body, which is why in the future it can easily cope with various diseases.

It is possible to build a similar pyramid yourself. Such a pyramid helps cleanse the blood, improves its composition, helps normalize blood pressure, relieves various pains, and accelerates the healing of wounds and bone fractures. It can also have a healing effect during the healing of the body after surgery, radiotherapy and during the transfer of various tumors. The pyramid also helps with microbial-parasitic diseases.

It should be noted that the medicinal properties of the pyramid can be used not only for medicinal purposes, but also for the purpose of prevention. Products stored inside such a pyramid are endowed with positive healing energy.

What shapes can pyramids have and what can they be made of?

The shape of the pyramid should always be in a ratio of plane inclination to the base of 3:4:5 (see figure below)

But many pyramid experts who write in the literature on how to make a pyramid forget the most important thing: that the pyramid has a certain direction to the cardinal points, and even objects that are placed inside the pyramid (living beings, plants, energy auras) - all this must happen according to towards the 4 cardinal directions. Depending on the direction of the cardinal points, a certain influence of the pyramid on the object placed in it, and even a living creature, occurs.

For example, if you place the face of a pyramid and an object towards the north, there will be a positive effect accordingly.

If placed towards the south, there will be a negative effect.

Towards the west and east - the effect is neutral.

In the same way, there is white magic, black magic and gray magic.

Pyramids can be created from any material substances (matter).

These could be flower pyramids. Wooden pyramids. Metal pyramids, stone pyramids, solar pyramids, lunar pyramids, color pyramids, pyramids of living beings, pyramids of people, pyramids of skulls, pyramids of bones, pyramids of water, fire, air and earth.

For example, the same Moses, when he led the Jewish people out of Egyptian slavery, built a huge number of pyramids from stones in the desert, where there was no water, and with the help of condensation, entire streams of water were obtained, which the Jewish adepts fed on as living water.

Or for example, YOGI - their most important sign is the “LOTUS” pose, but few people know that the lotus position is a human pyramid. With the help of the human body, a certain pose is created and in the direction of the north, south, west and east, the yogi absorbs a huge energy impulse from the sources of life.

Sometimes even without eating food for many days!

A similar concept exists among sun eaters when they adopt a certain pose that represents feeding on pure solar energy.

Note that even the nature woman takes a pyramid pose, only the opposite. Her bed expands and she gives birth to new life.

Treatment rules

One of the very effective methods of therapy is treatment with a pyramid at home, reminiscent of the pyramid of Cheops, Khafre and other pharaohs. To date, this has not yet been explained by science, but such structures quite strongly activate the vital forces of an unhealthy organism. When using pyramids, the composition of the blood is quickly restored, pain subsides, and blood pressure normalizes. It has been observed that after several sessions, healing of wounds and fractures, surgical injuries, tumors and complications after radiotherapy is accelerated. When patients ask what diseases the healing pyramid treats, they can answer that there is no specific list, since such a design affects the entire body, thereby restoring it.

The following methods of influence are used for therapy:

1. Very often, placing the patient under a large pyramid is used. For multiple and severe illnesses, this method is indispensable, since the healing possibilities of such a design are almost unlimited. The time spent is quite individual. In case of overwork, 30 minutes is sufficient to restore strength and eliminate discomfort. To treat headaches with a pyramid, you will need to stay inside for 30–40 minutes so that the problem area is located as high as possible towards the top. With psoriasis, you need to be inside several times a day.
2. Only an unhealthy organ (leg, arm) can be placed under the influence. If there is a fracture or dislocation, then for 30 minutes 2 times. It was noted that fractures healed twice as fast.
3. In addition, you can pre-charge aluminum foil and then bandage it to the affected area of ​​the body for a couple of hours. For pain in muscles, joints and internal ailments, this method is indispensable. To do this, the foil is charged in the pyramid at 1/2 the height for 24 hours. The sheet prepared in this way is wrapped in a layer of linen, and then applied to the sore joint or other place. The top needs to be covered with a bandage and left overnight. Such bandages are effective for pain in the abdomen, head, limbs, chest, rheumatism and arthritis. Using a similar treatment method, most often the patient notices that the pain ends very quickly, and over time the illness stops bothering you altogether.
4. How to make a pyramid for treatment is already known; you need to understand what methods of influencing the body still exist. The structure can also be placed under the bed, but without metal. 1–4 pyramids 10–15 cm high are placed so that one of them is below the patient’s navel. The pyramids are located on the cardinal points. The duration of the session should not exceed 30–40 minutes. There should be breaks of several days between them. The pyramid is used to improve sleep and well-being of the patient, as well as during radiation and operations.
5. Another way to treat with a pyramid is this. The patient sits on a chair with a back, and a structure is installed under it. Enuresis and hemorrhoids are treated in this way.
6. To charge water in a closed bottle, keep the container under the pyramid for up to 14 days. The liquid should be located in the lower third (conventionally, “dead” water) or in the upper third (conventionally, “living” water). At the time of charging, the amount of liquid should not exceed 10% of the volume of the structure. “Dead” water has antiseptic properties, bacteria do not multiply in it, and it is remarkably helpful when used to rinse the throat and mouth as a preventive measure for influenza and sore throat, as well as to alleviate an existing disease. To eliminate a runny nose and prevent the spread of infection, rinse your nose with it. Drinking “living” water helps increase energy levels, prolong life, eliminate diarrhea, colitis, dysentery and menstrual problems. This water helps eliminate vomiting, kidney problems, and headaches. It is very effective for food poisoning and various allergies. For dandruff and hair loss, moisten hair to the roots with it 2-3 times a day. For general healing of the body, drinking pyramid water or infusions kept there for 24 hours at a level of 2/3 of the height is very effective. Even a small part of such liquid brings enormous results.
7. To relieve any type of pain, you can simply place the pyramid on the sore spot. But at the same time, a person must take a position according to the geomagnetic field of the Earth: the head is located to the north, and the legs are to the south, in a lying position. The edges of the structure must be precisely oriented to the cardinal points.
8. You can use a set of cardboard pyramids. A person should place them on bioactive points and hold them for 20 minutes to 2 hours once a day. When otitis media begins, you can be cured in one session (30 minutes). For therapy, the main thing is to capture the onset of the disease, then it will immediately stop bothering you, much less progressing.

There is one more important condition for obtaining excellent results. A person located in a pyramid should be relaxed and calm. He is mentally obliged to trust the structure and believe that it will help him.

Only in this case will the “attunement” of several energy objects - the human body and the pyramid - be achieved, and a positive result can be expected from the session.

Any variants of pyramid therapy show excellent health results. Thus, in a month and a half, patients get rid of osteochondrosis acquired 20 or more years ago. With congenital angina and heart disease, you need to learn how to stop attacks in the initial period, without waiting until the pain becomes unbearable.

This therapy is excellent in curing impotence, mastopathy, and also in healing children suffering from leukemia.

A person who stays in the pyramid receives immunity from many diseases. Vodka, which has been in the pyramid for a couple of hours, can treat alcoholism.

Without using antibiotics or other medications, in just 5 sessions, doctors can easily cope with sluggish pneumonia.

The range of uses of pyramids is very large, but not completely exhausted. Not all therapeutic possibilities are known to mankind.

Practical application of the pyramid in animal husbandry.

If you want to raise ideally healthy living beings, from chickens, piglets, lambs, and ending with humans, then a pyramid is made of silk or other transparent structure above their habitat (a person’s bed) from silk material or another transparent structure. A similar thing was used in folk art when they made cradles in the shape of pyramids (there was a cradle at the bottom, and a pyramid was made at the bottom), and this was done in all countries.

It is still used in villages and villages for centuries.

Several times less than various diseases, especially chronic ones, rapid recovery from various diseases, experiments showed that even cancer was cured, not to mention all kinds of ulcers, both inside and outside the human body and animals.

Treatment of spurs

The medical one is located near the Pyramid hotel in Kolpino. Treatment of spurs in this complex is carried out at the highest level.

This pathology is bone growths that look like beak-shaped or spiky protrusions on the heel bone, appearing as a result of a constant degenerative-inflammatory process of soft tissues.

There can be many reasons for this, but most often it is a strong load on the musculoskeletal system, beyond its physiological capabilities.

X-ray examination is most often used for diagnosis. Conservative therapy is used for treatment. It is aimed at eliminating inflammation caused by a bone thorn. In case of neglect, surgical intervention is most often required.

Many healers use pyramid treatment, which shows very good results and affects not only the musculoskeletal system, but the entire body as a whole.

Practical application in the development of brain activity by training willpower:

If you want to feel the enormous potential of your physical, emotional and mental strength, then you need to place yourself in a pyramid and even sleep in it, building it above your bed.

The bed should be square, not very soft, where you can simultaneously perform relaxation, hypnosis, self-hypnosis, meditation, and also study the works of various philosophers, scientists and adepts of the past and present.

It is in such places that shamans and magicians develop beyond the capabilities of the human personality, and to this day, all their abilities to penetrate into the past, present and future have been developed in certain poses, and in certain places the pyramids, heading north - it was possible to find out the future, the so-called northern star, this is how the Magi recognized the appearance of Jesus Christ when there was a supernova explosion.

Where to place

Do-it-yourself pyramids for treatment in apartments must be placed away from heating appliances, sewerage and water supply. A wonderful place, if possible, would be a summer cottage. One of the faces must be strictly oriented to the north. Construction must be approached with bright thoughts.

If the rules of the “golden ratio” are violated, then you can’t expect efficiency from the structure; it will only cause harm.

Practical application for life extension.

It is necessary to build 2 pyramids. 1 should be painted pink, the second blue.

In the morning you should regularly visit the pink pyramid. The aura of the rising sun is concentrated there.

And in the evening you need to visit the blue pyramid - the moonlight concentrates there.

Since a person is a receptacle for the energy of the sun and the moon, the harmony of solar and lunar energy, received through the pyramids, regulates the homeostasis of the human body.

And if you want to live up to 100-120 years, a person is not destined to live longer, unfortunately, because then a certain deviation of the aura and a transition (reincarnation) from one material entity to another appears, but the age of up to 120 years is the real age of a centenarian.

Therefore, everyone can extend their life by 20-50 years.

Useful tips

You should not place different objects under the pyramid at the same time, as the properties and qualities of one object may be redirected to another.

It is necessary to clean the pyramid at least once a month. To do this, green tourmaline is placed in it on grids.

For meditation and treatment, pyramids 1.5-3 m high, located on reinforced concrete surfaces, are not effective. In such conditions the structure will not work.

The 2.7 meter high triangular treatment pyramid uses rolled plastic for the outer covering as it is lighter and cheaper to work with.

To fasten the wooden frame, glue is required. The use of metal is strictly prohibited.

To increase the effectiveness of the effect, while under the pyramid, you need to turn your face to the sun.

1. If you sit on a chair under the device, it is better if it is made of plastic.
2. Therapy is more effective in daylight.

Practical application in cooking.

If you create a small pyramid, with a volume of no more than 15 dm3, in the form of a covered pyramid without a bottom, then you can cover any food for 6 * 10 = 60 seconds, which will destroy all bacteriologically dangerous substances and microorganisms and etheric new formations of a magnetic wave nature will appear, which will direct the molecular structure of any substance located under the pyramid (food) in a positive direction. The main thing is that you do not confuse the sides in how you cover the pyramid, because otherwise the food may have a negative effect.

This preparation was used by ancient masters of magic, preparing living and dead water, food, products for kings, Caesars, and kings.

Work areas

Pyramid treatment involves charging objects that a person will then use with useful energy:

1. At a height of 2/3, various liquids are placed on the shelves of the pyramid: infusions of herbs and water.
2. At a height of 1/2, various metals and aluminum foil are placed for charging.
3. Products are laid out at a height of 1/3: seeds before planting, grain, and blades are also sharpened.

For small pyramids, the load on the internal volume should not exceed 8–10%. This charge will be optimal.

Practical use of pyramids of 4 primary elements (air, water, earth, fire).

1. Pyramid made of air. — this pyramid is made using 4 candles, which are placed at a distance of a meter from each other in the shape of a square. At the intersection of the diagonals, an apple or any object of an edible nature is placed, which you must offer to the person whom you must influence with your charms, for example, so that they fall in love with you or, on the contrary, so that someone likes you.

2. Pyramid made of water. This ancient fortune telling is based on Christian traditions, when you take 4 flowers, your betrothed, which you can find in the horoscope, and throw 4 places into the water in the shape of a square. In the middle you place a boat made from the bark of an old tree (like a boat), where you pin a photograph of your betrothed. Consider that it will already be yours in any case.

3. Pyramid made of earth. Take a shovel and make a pyramid from the EARTH, but at the same time place any item of your betrothed in the pyramid (hair, button, thread from a shirt, and so on).

Consider it to land at your location within a week. And he will only think about you.

4. Pyramid of fire. Walk at the crossroads of two roads or paths, or simply draw a cross, where you light 4 small fires at a distance of 1x1 meter from each other. From various tree branches.

There should be oak on the north side, birch on the south, hazel on the west, hazel on the east.

In the middle, stand yourself and mentally imagine your betrothed. The main thing is to observe fire safety.

Don't move until the small fires burn out. Consider that the soul of your betrothed will burn and glow only when he remembers YOU.

Features of accommodation

The pyramid does not have strict dimensions and does not require a specific area to be located on the site. Some believe that the higher the structure, the more effective it is. Others even create small buildings, the dimensions of which resemble a tourist tent.

When constructing a pyramid on your own in a dacha, it is important to follow these rules:

• One of the sides of the structure should have a north direction.
• It is unacceptable to use metal elements as a building material.
• The best installation location is on a hill, away from railways, power lines, and radio towers.
• It is desirable that the building be as tall as possible.

Important! In the process of building a pyramid, it is necessary to strictly adhere to construction technology.

The higher the pyramidal structure, the more benefits it can bring to users Source na-dache.pro

Apipyramids and suggestions for their use!

It has become very fashionable, especially in the southern parts of countries where beekeeping is developed, to create apipyramids. BUT you need to understand the essence of the pyramid and what it represents for those same bees.

For some reason, there is an opinion that any pyramid can be erected, and a healing process will result, the bees will begin to produce more honey and people will be cured. But the ancients believed that there was a pyramid with a plus (top up) and a pyramid with a minus (top down).

In this case, bees are the antipodes of ants, who build pyramids according to the system of totalitarian structure of relations between insects. Bees, in their understanding, prefer a free device in the form of hexagonal honeycombs. This suggests that the gradation of a bee family is very different from the gradation of an ant colony. They are more freedom-loving and more independent from each other. Accordingly, ideally, apipyramids should not have 4-sided planes at the base, but 6-sided ones, which taper towards the top. Therefore, it is a mistake to listen to many gifted amateur inventors who, without knowing the essence of the structure of a bee colony, begin to apply it to pyramids.

There is an even more original way of building apipyramids, when they are turned upside down, and space is created on top for the bees to communicate with the environment. This is the so-called “anti-apipyramid”. That is, when the energy of space is concentrated not from below from the ground upward, but, on the contrary, from above from the airspace downwards. Then you don’t have to worry about going into this inverted pyramid, but simply install a small window at the bottom, where the honey will concentrate at the very bottom and with a little heating, installing a faucet, the honey can be poured into some container. Accordingly, bees can endlessly build a super-hexagonal shape, especially in warm countries where it is not necessary to install insulating walls for bee houses. Such inverted apipyramids will be very fruitful (about 5 times) and very useful.

The same type can be used to arrange egg-laying cages for birds, where birds flying into inverted pyramids can lay eggs (especially wild birds) and you can carefully collect them, enjoying the taste of life.

There are many ways to use pyramidal relationships, both in art and in health, and in all types of economics, politics, and culture.

If you wish, you can find all these ideas and practical tips on our website in the sections:

The Secret Doctrine of Pyramids in Health

The Secret Doctrine of the Pyramids in Art

Only by knowing the whole will you become many times wiser than other people!

Reviews from patients and comments from doctors

Some researchers believe that the popularity of such treatment lies in the fact that the pyramid contains so-called “pi” rays, which are precisely responsible for the destruction of microorganisms and tumor cells, as well as for the mummification of organic substances.

Many believe that the pyramid develops clairvoyance, removes the negative influence of computer and television energy, eliminates damage, toothache, normalizes blood pressure and quickly heals wounds and ulcers.

Many users claim that after treatment with the pyramid, they acquired immunity from many diseases, and water charged with such energy improves digestion, has tonic properties and weakens the skin's reaction to insect bites.

But still, if you look at the comments of doctors, they claim that such therapy is simply ridiculous and does not bring any positive effect. And people who engage in such therapy, according to their opinion, can rightfully be called charlatans. Such treatment has nothing to do with conservative therapy, and patients who use pyramid treatment are themselves responsible for the deterioration of their health.

How to make three-dimensional geometric shapes

Children learn about the world through play and creativity. Three-dimensional figures made by yourself will help you get acquainted with the amazing science of geometry.

Examples of stencils and templates can be downloaded from the Internet and printed. Then all the shapes are cut out and glued together. Older children can independently draw the development of the desired figure; parents help the kids.

Geometric objects are made from paper (white or colored) and cardboard. The latter material makes them dense and durable.

https://youtube.com/watch?v=vQmAzZijA2M

https://youtube.com/watch?v=dNq-0OwTFs4

Modeling various polyhedra

To learn how to make more complex models, it is worth starting with the basics, for example, with 3D triangles. Gradually improving your skill in creating simple layouts, you can begin to create complex models. Complex figures require skills and refined dexterity when performing, for example, at the time of unfolding or shaping the figure, you need to act so that it does not accidentally break.

If you have a question about how to make a high-quality paper pyramid, there is a detailed diagram with individual dimensions. You just have to put in a little effort, and then it will be difficult to do beautiful and high-quality work that will please the eye.

Thanks to the above methods, you can easily create various pyramid layouts. It is not difficult to learn how to perform these techniques, the main thing is to follow all the steps gradually and carefully.

Types of layouts

Layouts of paper houses can be very different. Several options for diverse schemes:

1. the simplest house in terms of making a model and further assembly. Even a child can cope with the work.

2. A more complex type of sketch, the diagram of which contains separate parts for fastening.

3. A beautiful two-story house with a compact facade and its parts. Homogeneous diagram without individual parts.

4. Vertical layout for creating a simple house. Thanks to this scheme, the strength of the product improves.

5. Option for a layout made from separate parts. All parts will have to be glued together step by step, but the shape of the body will be unique.

6. A complex layout of a one-story house and a two-story house, where there is an integrated part in the form of a roof.

Using any ready-made option as a basis, you can create a unique building. Originality can manifest itself in the form of improvements to the layout itself or the finishing decor of the paper home.

How to make three-dimensional geometric shapes from paper (diagrams, templates)?

Here are several schemes by which you can make three-dimensional geometric shapes.

The simplest one is a tetrahedron.

It will be a little more difficult to make an octahedron.

But this three-dimensional figure is a dodecahedron.

Another one is the icosahedron.

More details about making three-dimensional figures can be found here.

This is what three-dimensional figures look like when not assembled:

And this is what the finished ones look like:

You can make many original crafts from volumetric geometric shapes, including gift wrapping.

So that children can better remember what geometric shapes are and know what they are called, you can make three-dimensional geometric shapes from thick paper or cardboard. By the way, you can use them to make beautiful gift wrapping.

• thick paper or cardboard (preferably colored);
• ruler;
• pencil;
• scissors;
• glue (preferably PVA).

The most difficult thing is to develop and draw developments; you need at least basic knowledge of drawing. You can take ready-made scans and print them on a printer.

To keep the fold line straight and sharp, you can use a blunt needle and a metal ruler. When drawing a line, the needle must be bent strongly in the direction of movement, almost laying it on its side.

This is a development of a trihedral pyramid

This is a cube scan

This is the development of an octahedron (tetrahedral pyramid)

This is the development of a dodecahedron

This is the development of an icosahedron

Here you can find templates for more complex figures (Platonic Solids, Archimedean Solids, polyhedra, polyhedra, different types of pyramids and prisms, simple and oblique paper models).

By the way, to calculate the parameters of the pyramid, you can use this program.

By making three-dimensional figures from paper yourself, you can not only use them for entertainment, but also for learning.

For example, you can clearly show your child what a particular figure looks like and let him hold it in his hands.

Or you can print out diagrams with special symbols for training purposes.

So I suggest below that you familiarize yourself with the dodecahedron symbol, both simple and with small drawings that will only attract the baby’s attention and make learning more fun and entertaining

The cube diagram can also be used to teach numbers.

A pyramid diagram can help you learn the formulas that apply to a given figure.

In addition, I suggest you familiarize yourself with the diagram of the octahedron.

The tetrahedron diagram will also help you learn colors.

As you understand, the above templates must be printed, cut out, bent along the lines, and glued along special narrow strips adjacent to selected sides.

Before you start making three-dimensional geometric shapes, you need to imagine (or know what it looks like) the figure in 3D dimension: how many faces does this or that figure have.

It is very important that the length of the edges of the figure that will be connected to each other are the same length, so that no problems arise during the connection. If the figure consists of identical faces, I would suggest making a template while drawing and using this template

You can also download ready-made templates from the Internet, print them, bend them along the lines and connect (glue) them together.

More complicated craft

The cone is made a little more complicated. To begin, draw a circle with a compass. Cut a sector (part of a circle bounded by a circular arc and two radii) from this circle. The sharpness of the end of the cone depends on the cut out part of the large sector.

Glue the side surface of the cone. Next, measure the diameter of the base of the cone. Using a compass, draw a circle on a piece of paper. Then draw triangles to glue the base to the side surface. Cut out. Then glue the base to the side surface. The craft is ready!

Related article: Weaving from rubber bands: crochet phone case with diagrams and video

Assembly steps

The assembly principle is best considered using a simple layout as an example. In the future, this will make it possible to work with more complex types of circuits. Instructions for creating a paper house:

1. First you need to cut out the prepared layout from paper. The contours can be cut using scissors, but windows, doors and other parts that lie inside are removed using a stationery knife.

2. Lay out all the blanks and perform initial fitting of all parts. If necessary, you can make a correction in the form of trimming or make a new element.

3. Bend the house body blank along the appropriate lines. This forms the basis. It is also worth bending the connecting parts.

4. Glue the base of the “wall” of the building. Thanks to the sweep diagram, such fixation is made in one place.

5. The next stage of construction will be the separate production of a roof with a chimney and fastening the bottom of the craft. Fold the roofing sheet in half, forming the central ridge of the roof.

6. Divide a narrow strip of paper into 4 equal parts. Cut off the excess. Make folds at the points and glue the half cube.

7. Make an oblique cut on one side to glue the chimney to the base of the roof. It is better to detail this using double-sided tape.

8. Glue the bottom to the body, and lastly secure the roof itself.

If the master class is completely completed, the result will be a small but very nice house.

Triangle drawing

How to draw a Penrose triangle? Not everyone likes to do origami, but many people love to draw.

To begin with, draw a regular square of any size. Then a triangle is drawn inside, the base of which is the bottom side of the square. A small rectangle is placed in each corner, all sides of which are erased; Only those sides that are adjacent to the triangle remain. This is necessary to ensure that the lines are straight. The result is a triangle with truncated corners.

The next stage is the image of the second dimension. A strictly straight line is drawn from the left side of the upper lower corner. The same line is drawn starting from the lower left corner, and is slightly not brought to the first line of the 2nd dimension. Another line is drawn from the right corner parallel to the bottom side of the main figure.

The final stage is to draw the third one inside the second dimension using three more small lines. Small lines start from the lines of the second dimension and complete the image of a three-dimensional volume.

Defining parameters

First of all, let's determine what the pyramid will be like. The development of this figure is the basis for making a three-dimensional figure. Completing the work will require extreme precision. If the drawing is incorrect, it will be impossible to assemble a geometric figure. Let's say you need to make a model of a regular triangular pyramid.

Any geometric body has certain properties. This figure has a regular polygon as its base, and its vertex is projected into its center. An equilateral triangle was chosen as the base. This condition determines the name. The side edges of the pyramid are triangles, the number of which depends on the polyhedron chosen for the base. In this case there will be three of them

It is also important to know the dimensions of all the components that will make up the pyramid. Paper developments are made in accordance with all the data of the geometric figure

The parameters of the future model are agreed upon in advance. The choice of material used depends on these data.

Origami from a square of paper

To fold a beautiful origami cube, you need to follow the instructions.

This craft may not work out the first time, so you need to practice and get better at it.