Lily Kanzashi photo and video master classes for beginners

In this video I will show you how to make a beautiful craft with your own hands Roses on lace This is a master class

10 245

Master - Kashzashi class. Enjoy watching everyone! ·•●Subscribe to the channel, like and join

17 245

Video master class with explanations on making a sharp petal with a tube inside using the kanzashi technique

10 244

I present to your attention a master class on how to quickly create a beautiful headband from ready-made roses and

8 244

Honey and Milk music from the YouTube library

26 242

This video was processed in the YouTube Video Editor (…)

12 240

Elegant Kanzashi bow Master class! Hello, needlewomen! In this video lesson I will show

10 237

In this master class we will learn how to make a beautiful headband for your beloved daughter or for yourself! In this

1 234

Assembling a cascading bow “Princess Aurora”. Stylish elastic bands for babies.

23 232

Various DIY decorations. From various materials.

10 231

Master class for beginner needlewomen. In this video you will see how to make flowers for rubber bands

10 230

Master class on creating a hair tie. Kanzashi. Master class for creating a clip for the

9 230

Thank you for staying with me links to the store... MY Instagram...

16 229

Video and photo master classes on creating souvenirs, topiaries, cards and hair decorations in style

7 225

In this video I will show you how to make a Yellow Flower on a clip, which you can make with your own hands

12 224

In this master class I will show you how to make a beautiful and simple pinwheel flower. If you have any problems

4 223

Video master class with explanations on making a hair tie bow using the kanzashi technique with your own

4 223

Kanzashi is an amazing technique for creating flowers, butterflies, bows and bows from satin ribbons with your own hands.

12 223

Bright flower made of satin ribbons. Master Class. Kanzashi. My new creation - watch the new video!

14 223

A huge hello to all handicraft lovers. Today we will learn how to make a three-dimensional rose from satin

12 221

Black and white necklace. How nice it is to make decorations and toys with your own hands! Handicrafts, bead embroidery,

2 219

Master class on making the main sharp petal “Kanzashi”. Such a petal can be made from

10 219

Master class on making the main sharp petal “Kanzashi”. Such a petal can be made from

10 219

Master class on making the main sharp petal “Kanzashi”. Such a petal can be made from

10 219

Source: https://mycrafts.ru/-kanzashi-master-klass/38/ru

floating cup

You will need: thin floral felt, cup, saucer, fork, foam sponges, glue gun, titanium glue, soldering iron, ruler, satin ribbons of different colors 5 cm wide, tweezers, weight (metal square or something else), decorative ornaments - stamens, microbeads, beads, butterfly...

Master Class

1. Cut out felt leaves in the required quantity. There are 30 of them in this master class. Image 4.
2. Cut the ribbons into squares; for one flower you will need 5 squares of the same color. Image 5.
3. Form a petal by folding the square twice diagonally, then pinch with tweezers. Image 6.
4. Guide the soldering iron along the marked line. Image 7 and 8. You should get a petal like in image 9.
5. Turn out the petal. Image 10 and 11.
6. Make 50-70 petals this way. Image 12.
7. Fold 5 stamens and thread them through a bead. Image 13 and 14.
8. Shape the fork into a curved shape and glue the fork handle to the inside wall of the cup with a glue gun. Then glue the fork to the center of the saucer, leave it for 10 minutes, and then apply hot glue on top. Image 15 and 16.
9. Place a metal square on the fork and saucer as a weight. Image 17.
10. Cut the sponge into pieces and glue them on, masking the fork, weight and making a platform for the flowers. Image 19.
11. Cover the foam rubber with felt. Image 20.
12. Take a bead with stamens and glue 5 petals. Make all the flowers this way. Image 21,22 and 23.
13. Apply titanium glue to the core of each flower and sprinkle with microbeads. Image 24.
14. Cover the saucer and the inner wall of the cup with petals. Image 25 and 26.
15. Glue the flowers as shown in images 27 and 28.

The soaring flying cup with kanzashi flowers is ready!

Necessary materials

• Satin ribbon, lilac, 75 mm wide and white, 65 mm wide
• Half bead, diameter 8 mm
• Bead cap
• Felt circle with a diameter of 2 cm

It is worth preparing 16 petals from pieces of 7.5x7.5 cm. Fold the piece diagonally, fold it again, and again in the middle. We hold the resulting triangle by the center, and lift the edges up and lay them flush with the upper bend. All edges of the tape on top should lie flat.

After this, we bend the petal inward. Cut off the tip and solder over the fire. We cut the bottom at a slight upward angle and solder it with a flame.

When they are ready, we begin assembly. We glue 8 blanks together.

We glue the next eight pieces from the bottom. We place them between the previous row in a checkerboard pattern.

We make the following ones from white tape 65x65 mm. We make exactly the same 8 pieces and glue them together.

We glue the layers together, not in a checkerboard pattern, but under each other.

You will need another layer of white pieces of 5x5 centimeters. We form them in the same way as the previous ones. We collect eight small ones on a thread. They can be glued together, but it is better to gather them on a thread and pull the leaves together more tightly. Fix and cut the thread.

We glue the last layer of small ones so that they are under each other.

We decorate the middle - glue a large rhinestone or a beautiful bead.

Additionally, we will make green leaves from green ribbon of different shades, measuring 4x8 cm and 5x10 cm from. Fold the corners of the rectangle towards the center. Fold the resulting triangle in half, and holding the middle of the triangle, lift the edges up; they should be at the same level.

We cut off the tip, solder it, also cut off the bottom and singe it over the fire. 3 large and 4 small leaves.

Additionally, we use stamens for decoration.

We glue the stamens and leaves from the bottom.

The incredibly beautiful product is ready!

Step-by-step instructions for making different types of ribbon flowers with your own hands

We have prepared several step-by-step photos for making flowers from ribbon with your own hands. If you don't rush and do everything consistently, the result will be impressive.

DIY roses from satin ribbons

As in the world of living roses, there are several varieties among ribbon compositions. These flowers are relatively easy to make with your own hands using satin ribbons.

Now we can make two more sunflowers and green leaves according to the instructions described and assemble them into one summer picture! This rose was made by alternately folding a wide ribbon in half. The petals are prepared separately and collected together only on the stem.

Making peony flowers from satin ribbons

Now we will tell you how to make another flower from a ribbon with your own hands - a peony. Prepare a lighter, a ribbon for kanzashi flowers 5 cm wide (choose silk, satin or organza), a needle, and scissors.

1. The tape is divided into squares: 10 pcs. size 5x7 cm, 9 pcs. − 4x6 cm, 8 pcs. − 3x5 cm and 7 pcs. − 2x4 cm. You can take fewer petals, the main thing is that there are from 25 to 40 of them.
2. Cut petals from each stack of identical squares.
3. To give a beautiful natural shape, you need to walk under each edge with the flame of a lighter or candle. Keep it 2 cm away from the petal.
4. The smallest petal is rolled into a roll and secured with a thread and a needle. Then the second petal is secured with stitches.
5. The petals are sewn on in size from smallest to largest in a checkerboard pattern.

The peony will turn out lush and as if it were real!

DIY bouquet of hyacinths made from satin ribbons

For hyacinth we take pink and green satin ribbon, scissors, needle and thread, wire, beads, and a heat gun.

White lily flowers made from ribbons

Cut 18 pieces of ribbon, each 6.5 cm long. Let's put them together and at the same time cut out the petal of the future lily according to the prepared template. Be sure to burn the edges. We hold the petals with the front side facing away from us.

We make veins on the petals using the heated blunt side of a knife - we draw 4-6 veins on the wrong side. It is better to place a soft cloth under the petal to avoid puffs.

We attach the petals of the first row to a base with a diameter of 3-4 cm made of folded and glued tape. Then we begin to glue the petals of the second row one by one. The third row consists of 6 petals glued separately. Don't glue it yet.

We collect the stamens from the beads onto a fishing line. Spray the first two rows with hairspray, straightening them. As soon as the varnish has dried, glue on the last row and the stamens.

The finished lily looks amazing!

DIY pansy flowers

Visual instructions for picking a flower
There is another way

DIY poppy flowers made from satin ribbons

Prepare a scarlet ribbon and cut 4 large and 4 smaller rectangles from it:

1. Cut a circle out of a black square and melt the edges. Now you need to thread the edge and sew it seam forward with a needle. Stick a little filler inside, pull the edges together and secure. It turns out to be a small ball.
2. Take black threads, wind them around 2 fingers, tie them in the middle and cut the edges.
3. Glue the threads to the back side of the black core ball.
4. Cut out the petals and process them with a lighter. During scorching, the edges need to be stretched a little, this will give the petals waviness.
5. Take turns gluing the petals of each row in a checkerboard pattern.

The result should be such a gorgeous poppy

Kanzashi tulips made of satin ribbons

For tulips, you can take several colors. Take a ribbon 5 cm wide and cut it into equal squares measuring 5x5 cm. Fold each square in half and in half again. You need to trim the edges a little and glue the ends together with a lighter. The petal should be turned out. Now we do the same with all the blanks. You can begin assembly by gluing the petals to each other. Each flower consists of three petals.

Don’t forget to make long narrow leaves from green ribbons for your tulips or the same ones as buds using the kanzashi technique

Chamomile with kanzashi petals from ribbon

Prepare scissors, narrow satin ribbon, ruler, heat gun and lighter. A narrow ribbon is cut into 7 pieces of 12 cm each. Each edge is burned. Now you need to drop some hot glue in the middle and glue the ends together. This is done with all stripes. But the blanks are glued together in a checkerboard pattern.

The middle of the flower is decorated with a button or bead

So how? Did you manage to create your first masterpiece? It's okay if something doesn't work out the first time. Don’t be afraid to experiment and find your wonderful satin ribbon flowers a worthy place in the house, or maybe someone close to you has already had your eye on your work as a gift? In any case, you are guaranteed an interesting activity for the whole family.

Preparatory work

A very simple way to create a real masterpiece with your hands. In order to start work, you need to prepare materials.

• canvas or fabric with a wide weave in a hoop
• white satin ribbons 12 and 25 mm wide and green
• soft wire
• acrylic paints preferably
• PVA glue
• paint brush
• toothpicks
• needle with large eye
• scissors
• lighter
• awl
• Diagram or template

Scheme of a lily, leaves, stem and buds.

When all the tools are prepared, all you have to do is be patient and not worry if something doesn’t work out as you would like. If you're new to embroidery, you can make it easier by hoopping the fabric and drawing the outline of a flower on it.

Today there are ready-made kits for needlework in specialized stores. If this is your first time creating a painting, then it is better for you to use just such a set. The outlines of the flower are clearly printed there and high-quality materials are selected. They will not curl up during work and irritate the novice master.

Christmas tree cover made of ribbons

You will need: a bottle of champagne, 10 meters of green satin ribbon 2.5 cm wide, gold ribbon 2.5 cm wide, titanium glue, glue stick, decorative snowflakes, thin gold ribbon and bead for a bow, sketchbook sheet, ruler, scissors .

Master Class

1. Prepare a sheet of thick paper 16 cm long.
2. Try it on the bottle and glue it using a glue stick. The cover should be easy to remove.
3. Prepare a strip of paper 8 cm wide, try on the collar and cut off the excess.
4. Glue the collar to the cover using a glue stick.
5. Glue the gold tape above the paper as a collar using titanium glue.
6. Cover the entire bottle with green tape as shown in the image.
7. Prepare 9 cm long pieces of green tape.
8. Form loops from the ribbons by folding them in half, then glue them as fir branches.
9. Make a bow out of gold ribbon, glue a bead and attach it to the bottle.
10. Glue snowflakes onto the spruce branches.

The Christmas tree-case for champagne is ready! I recommend watching this video!

Wedding champagne Groom Bride decor with ribbons master class/wedding champagne.

Watch this video on YouTube

Master class 1. Twisted rose from a solid ribbon

Let's start with, perhaps, the simplest and fairly quick way to make roses from ribbons with your own hands. Once you master the technique of rolling roses from ribbon, you can make them while sitting in front of the TV. Depending on the width and length of the ribbon used, you can twist both small and lush buds. You can use a ribbon made of any material - organza, satin, cotton and even strips of linen fabric.

What you will need:

• Any ribbon - the longer and wider it is, the larger the bud will be. For a medium-sized rose, a 2.5 cm wide ribbon is enough.
• Thread and needle or hot glue gun.
• Scissors.

How to twist a rose from a ribbon:

Step 1. Straighten and place the tape in front of you, then bend one of the ends of the tape (either) along the bias, as shown in Fig. 1.

Step 2. Wrap the tip of the ribbon into a roll in two or three turns to form the core of the rose, fix its lower part with glue or simply sew it (see Fig. 2).

Step 3. Now we begin to form the rose petals. To do this, bend the tape again obliquely to the outer side (see Fig. 3) and wrap it around the core of the rose, holding (and, if desired, fixing with thread/glue) the entire workpiece from below (see Fig. 4).

Step 4. Next, continue to “build up” the layers of “petals” according to the scheme: bend the ribbon outward - wrap the bud - bend the ribbon outward - wrap the bud, etc. (see Fig. 5). Periodically fix the layers of tape at the base of the bud with glue or thread and a needle. Remember that the most important thing is not to let the ribbon unravel.

• Experienced decorators can twist a rose by fixing the layers of tape only a couple of times (at the beginning and at the end), but for beginners it is easier to stitch/glue the “petals” of a rose much more often.
• It is more convenient to roll a rose by holding the base of the bud between your index and middle fingers, so that the flower seems to be lying in your palm.

Step 5. When the rose reaches the desired size, press the end of the ribbon to the base and tie/glue (Fig. 6).

• Practice curling roses from ribbons of different widths and lengths, experiment with the angle of the ribbon, the number of folds per layer, or the tightness of the twist to achieve the effect you like best. So, for example, a rose twisted from ribbon can be very multi-layered or, conversely, softer, have sharper corners or, conversely, rounded.

If you have any questions, we suggest watching a video on how to make a flower from a satin ribbon with your own hands using this technique.

Creative materials

Before plunging into the creative process, prepare everything you need and buy what you need. Buy materials in reserve. Maybe you will like the black and white hoop from our other lesson. Or a schoolgirl's set of hairpins and a tie.

For this master class you will need a satin ribbon:

• wishing (width 5 cm) – 2 meters;
• blue (width 5 cm) – 2 m;
• green (width 0.6 cm) – 5 m.

And:

• stamens to match the wide satin ribbons - 15 threads of each color;
• white half beads (diameter 0.8 cm) – 5 pieces;
• metal rim (width 0.5-0.7 cm).

For rubber bands, additionally: two felt circles and two elastic bands in the color of the satin ribbons.

Tools:

• scissors;
• heat gun + rods;
• lighter, candle or thermal cutter, if available.

Satin ribbon flower option

Let's consider one of the first options - creating satin ribbons with your own hands. All you need is a wide satin ribbon.

Process of creation:

1. The tape is cut into twelve pieces of nineteen centimeters each.
2. It is best to measure 12 cm and mark it with a pencil.
3. Fold the tape exactly along the mark, you will end up with 2 pieces equal in length.
4. Fold this way several times, then cut the place where the fold is located.

NOTE: The edges of the tape must be burned using matches or a lighter. It is worth considering that the fire cannot be placed above the tape; it is recommended to do this to the side.

Needle Safety

At first, a person only needs one needle for everything. Then, a person begins to slowly understand that for beads you need one thing, but for wool embroidery, darning or embroidery, something completely different, and it would be nice to buy a set, or better yet, another set too. And now you have a whole arsenal.

I would like to warn beginning embroiderers against carelessness. X-rays, stitches on the legs and other hospital horrors are not for us. For us – accuracy and prudence.

It is prohibited to: stick a needle into the armrest of a chair or sofa, put a needle in your mouth, or leave a needle on any surface. Even for the tiniest bit, even for half a half second. It is forbidden.

The needle is either stuck into the needle bed, or you are working with it. There are simply no other options, that’s all.

It's easy to get used to. Especially if you get beautiful and comfortable needle beds or organizers.

For example, such organizers. This one is from Tatyana Maksimenko. She posts master classes on her blog “Evening Gatherings”. She has free master classes, and there are also paid ones.

You can read about beautiful needle beds here on the website. A pincushion or a work of art.

And they delight the eye and keep the body safe and sound. And also the bodies of our loved ones and relatives.

It’s not difficult for me to remember - So, don’t step here!, So, we’re all looking for a needle, I dropped it here! (And especially in the carpet, it’s indescribable.)

There is one more rule. Do not leave thread in the needle. You can accidentally catch a thread, and the needle flies out of the needle bed and for some reason immediately disappears somewhere. Take out the threads and ribbons and then stick the needle into the needle bar.

Please be careful.

Side Ribbon Stitch

This ribbon stitch is done in almost the same way as the basic stitch, but here the ribbon is laid at an angle.

1. Pull the ribbon to the right side at the base of the stitch.

2. Place the needle under the tape at the base of the stitch (with the tape pointing upward). Moving the needle back slightly pulls the ribbon, straightening it.

3. At the very edge of the tape (on the left), we pull the needle to the wrong side, holding it with your finger at the base of the stitch. Then we pull the ribbon on the wrong side so that a curl is formed.

4. Attach the ribbon to the wrong side of the work.

Sunflower petals are made with a side ribbon stitch (by Dasha Svetlaya)

Leaves are embroidered with side ribbon stitch

Kanzashi lily - master class

Lilies made from satin ribbons invariably attract the attention of needlewomen with their beauty, and their ease of manufacture gives them additional popularity. In this article we will tell you how to make a lily from a ribbon with your own hands

In this article we will tell you how to make a ribbon lily with your own hands.

What is kanzashi?

Kanzashi (kanzashi) are Japanese hair ornaments that are worn as part of a traditional women's costume.

Initially, they looked like ordinary hairpins or combs; later they began to be decorated with artificial or live seasonal flowers, pendants, and inserts made of valuable materials.

Over time, hairpins decorated with silk flowers gave their name to a whole direction of applied art. It is based on typical origami techniques, but the material for folding is not paper, but pieces of silk (satin).

How to make a lily (kanzashi)?

Before starting work, prepare all the necessary materials, choose a comfortable place and time. You should not rush or be nervous, because despite the simplicity of execution, working with fabric requires patience, good mood and attentiveness. Necessary materials:

• silk or satin ribbon (5 cm wide);
• PVA glue (preferably thick construction glue);
• hot glue;
• candle;
• semolina;
• green food coloring or the core of a green pencil, a cotton pad or ball for rubbing the dye into the fabric;
• golden sparkles;
• thick fishing line;
• felt base (small circle, about 2.5 cm in diameter);
• a towel (thick enough to create a soft base when creating veins on the petals);
• knife.

Let's look at the step-by-step implementation of kanzashi lilies in our MK.

1. First of all, we will make a pattern for making the petals. The easiest way to do it is from cardboard, but if you have the opportunity to use thin plastic for this purpose, it will be much better. In addition, a plastic pattern will last you much longer. Pattern length – 7cm, width – 5cm. For one lily we need 17 petals. Moreover, in five of them, one tip should be cut deeper than the usual ones.
2. We singe the edges of the petals one by one over a candle flame. We burn it and immediately, while it is hot, pull the edges in different directions, giving them a “wavy” appearance.
3. Add texture to the petals. To do this, place the petals on a towel folded in several layers. We heat the knife and draw it with the back side (not the sharp one) along the petals, pressing slightly, so that longitudinal stripes-veins remain. Petals with cut ends (5 pcs) are additionally tinted green. To do this, it is better to use a few grains of food coloring. Just rub the toner thoroughly into the fabric (use a cotton pad or ball so as not to stain your hands and apply the dye evenly). If there is no dye, grind the lead of a green pencil and rub it into the satin.
4. Preparing the stamens. We cut the fishing line into pieces 5 cm long and dip the edge of each in glue and then in dry semolina. If little semolina sticks, dry the “stamen” and repeat the procedure several times. At the end, dip the dried stamen with semolina in glue and golden glitter. Let the stamens dry completely, then cut some of them shorter.
5. Glue the first row (6 pieces) of petals to the felt circle. Let it dry a little and glue the second row (6 more pieces).
6. Before gluing, fold the tinted petals in the center (along the longitudinal axis). We make the third (3 pieces) and fourth (2 pieces) tier of petals from them. When the structure dries a little, drop a little hot glue into the center and insert the stamens. Don't release them too early, hold them until the glue sets a little.
7. If desired, the lily can be attached to a chosen base - a hairpin, headband or elastic band. Or you can not attach it anywhere, leave it as is. As a result, we have such a beautiful flower.

According to our master class, a lily from ribbons can be made of any color, shape, splendor and size. Ready-made lilies are used to decorate clothes or accessories, create floral panels or souvenir bouquets, decorate rooms... The field for experimenting with satin lilies is so large that there is no way to list all the options.

Rest assured, loved ones will certainly appreciate such a gift, because hand-made kanzashi lilies carry a colossal charge of the master’s energy.

DIY ribbon flowers - a master class on making complex compositions

We offer a master class on making flowers from ribbons with your own hands:

Tools for work

Every housewife knows that the quality of the entire composition depends on the correctly selected instrument.

For ribbon embroidery you will need:

1. Hoop. The better the base for the composition is stretched, the better the result will be. The hoop must be selected according to the size of the future painting. If you are planning a small job, you can use a hoop with a diameter of 10 cm. If the picture is of impressive size, you will have to use a large hoop, namely a stationary one.
2. Special or tapestry needles. Embroidery with ordinary sewing needles is not possible in this case. The ribbon should fit easily into the needle. The needle size can be from No. 13 to No. 18. A No. 26 needle is also required for beads. It is best to use blunt needles. They will not cling to the warp and move the warp threads apart perfectly.
3. Lighter. Cut ribbons must be singed immediately to prevent them from unraveling.
4. Scissors.
5. An awl if the work is planned to be done on a thick base.
6. Floss threads. A flower stem embroidered with floss will fit perfectly into any composition.
7. Paints for fabric or batik. Used to achieve more dramatic shades.

Satin ribbons

To start working, you need to decide what kind of plot you should get in the end. If the painting is in a floral style, you need to choose which flowers you need to choose the material for. For example, if you are embroidering small flowers with ribbons, you should think about which ones. Only after careful consideration can you buy materials in appropriate colors, shades and sizes. Here it is necessary to take into account all the available shades of one flower. After all, one flower can have two or more shades.

Before determining how many shades a flower has, you need to take a closer look at it. Sometimes novice needlewomen can make a common mistake. Decide that, for example, the forget-me-not has only one color - blue. In fact, if you look closely, you can see that forget-me-not petals have a blue tint at the ends of the petals, and become a little darker and richer towards the middle. Such little things need to be taken into account before starting work. Then the result will exceed all expectations.

The width of the tapes can vary from 2 to 50 mm, so before purchasing, you also need to decide on the width. Here you need to know that, for example, narrow ribbons are suitable for embroidering leaves or petals of small flowers. Wide ribbons will make a beautiful flower with large petals.

Tapes for paintings can be:

• from organza;
• from nylon;
• corrugated;
• silk;
• satin.

You can embroider flowers and compositions with ribbons using one type of material or combine different types

It is important to remember that when the painting is finished, there is no need to get rid of the remaining materials. In the future they may be used in another composition

Airy inflorescence made of satin ribbons

And so to create a lily flower from satin ribbons we will need:

• satin ribbon, 5cm wide
• lighter or candle (optional)
• scissors
• glue "Moment gel"
• tweezers
• stamens

Since there will be 6 petals in the bud, and they must be the same in size and shape, we need to make a small pattern. For this we need a small piece of paper and a pen. Now we draw a petal, 5 cm wide and 10 cm long. Cut it along the contour. Thus, our pattern is ready. Next, we take the tape and measure out a 10 cm segment. Since we will have 6 blanks, we also make 6 segments. We apply the pattern to our segment and cut out the petal along the contour of the pattern. Then we process the contours over fire. If desired, you can wrap them a little in different directions. To do this, without waiting for the edges to cool, we bend some forward, the other back. Then the edges will be a little wavy.

Next, we bend our petal in half along the long side with the front side inward. We clamp it with tweezers and bring it to the fire so that it heats up and takes the desired shape. Thus, we will fix our bend, and we will get a strip in the center. The bend can be done in another way. For this we will use a soft surface. A towel folded several times can serve as a soft surface. Next, we heat our petal over the fire and immediately, while it is still warm, place it on a towel with the front side up and press the strip in the center with tweezers.

We choose the method of forming the bend ourselves, based on our desires and preferences.

To make our petals more petal-like, we need to bend them a little. In order to bend the sheets, we take an object that has the shape of a small cylinder. It could be an ordinary tea light or something like that. We apply our petal to its tin edge, with the wrong side facing it, and heat the petal over the fire. Then we take it away to cool down. Thus, the petal will take a curved shape.

After we have done everything, we proceed to the formation of the bud itself. First, we take two pieces, fold them evenly, with their front sides facing each other. It turns out to be two folded into one. Now they need to be fastened on one side to each other. Use tweezers to pinch the bottom edge on one side, where they will connect. We bring them to the fire and lightly burn them to hold them together. Then we take another petal and fasten it to the edge of the free side, which we have already connected, in the same way as the previous ones. Next, we connect the free edges to connect all three together.

In the same way we connect the remaining three. We made rows.

Only the stamens are missing. They can be purchased at any florist store or made with your own hands. It all depends on your preferences and desires.

One flower requires 6 stamens. We put them in one bundle and fasten them. We insert it through the middle of the first row of three pieces, up to half the length of the twigs of our stamens. We glue them with glue. Then a little lower under the first row we attach the second row of petals. We cut off the remaining darts under the flower. Ready! Such flowers can be used to decorate various flower arrangements, as well as to decorate hairpins or headdresses.

Kanzashi: paintings from satin ribbons – master class

Aesthetic Japanese have come up with an unusual direction in making flowers from satin ribbons with their own hands - kanzashi. Initially, this word was used only in the sense of hair decoration. Today it is a popular trend not only for hair accessories. Kanzashi is used to decorate boxes, frames, jewelry, and create topiaries.

INTERESTING!
There are two forms of kanzashi parts: round petals and sharp ones. The rest are made from combinations of these shapes.

Accessory using the kanzashi technique
And here is a small tutorial on creating paintings using the kanzashi technique.

Material: yellow and green ribbons 2.5 cm wide, felt for a circle under the base (Ø7 cm), black (1×40 cm) and brown (1×50 cm) ribbon for the center.

Now we can make two more sunflowers and green leaves according to the instructions described and assemble them into one summer picture!

Kanzashi lily: video master class

Lily using the kanzashi technique attracts many needlewomen with its beauty and ease of manufacture. No need to fold or stitch anything. All you need to do is have a ribbon and a lighter on hand. To speed up the process, make a petal pattern from cardboard and use the kanzashi master class.

For kanzashi lilies you need a wide ribbon

The “Lily” master class will require the following materials:

• Hobbies and handicraftsKanzashi dahlia Hobbies and handicraftsKanzashi sunflower
• wide white ribbon;
• green pencil lead or food coloring;
• lighter;
• PVA glue;
• white threads;
• semolina;
• glitter;
• a piece of felt.

Video tutorials on creating flower kanzashi

• Video tutorial No. 1 on creating a kanzashi lily for a headband
• Video tutorial No. 2 on creating a small Kanzashi lily
• Video tutorial No. 3 on creating a large Kanzashi lily

The procedure for making petals

The relief of the petal depends on the execution technique

Place the shape on the wide white tape and trace around it. Cut out 17 petals, 5 of which cut off the sharp edge on one side. These petals will form the middle of the flower. Run the flame of a lighter along the edge of each petal, and while the cut is still hot, stretch the tape.

By following the instructions in the master class, you will get wavy petals.

When all the leaves are ready, start “painting” the flower. This MK involves the use of classic relief petals obtained by embossing. Fold the towel in several layers and place the petals on it. It is necessary that when pressing, the upper part of the towel deepens greatly.

Heat a knife over the fire and rub the blunt side across the leaf. You will get a groove that looks like a vein. Paint the remaining petals in the same way.

Pansies

These beautiful flowers can also be created simply and easily from satin ribbons; to do this, do the following:

1. Having prepared the yellow square, it is folded into a triangle. In this case, the side corners are bent down to obtain a fold in the middle.
2. Turning the petal over, bend the edges. Fold the corners towards the central part and cut off the excess. Thus, they make 2 petals by gluing them together.
3. Purple and black scraps from ribbons are formed into triangles, placed in this way: small on large.
4. Do 1 action, collect the same 2 petals.
5. Glue the petals in the center and decorate with a bead in the middle.

These are all the proposed options for making flowers from satin ribbons with your own hands. We hope you like one of the options and try it at home.

What is needed to make flowers from satin ribbons

If you are interested in embroidery and want to try working with satin ribbons, then you will need:

• a set of silk and satin ribbons of different colors;
• needles with a wide eye;
• scissors;
• base fabric with hoop;
• lighter or matches for burning the ends of the ribbons;
• beads, beads for decoration;
• a simple pencil for drawing.

If you want to try your hand at the kanzashi technique or just to make flowers from satin ribbons by hand, you need to stock up on the following tools:

• ribbons, beads, beads, sequins, base fabric;
• scissors, tweezers;
• glue gun

Much depends on the width and length of the tape.

Braiding for decoration

Making a kanzashi-style headband begins with braiding the outer part. It will hide the metal and create a beautiful background.

From a green ribbon 0.6 cm wide, cut two strips 2-2.5 meters long. Treat the edges with fire.

.

Fold the edges 1 cm inward. Glue the very edge to the tape using a heat gun. You will get two initial loops.

Pass the right loop into the left one so that the edge of 6 millimeters peeks out, and the rest is hidden.

Fold the left ribbon to form a loop and insert it into the right one. Pull up the bottom band. The photo shows the process from the front side.

Continue weaving, remembering to tighten the ribbons.

During the process, be sure to try on the kanzashi braid to the headband so as not to make a mistake with the length. Form the tip into a loop. Flame it and glue it to the base.

This is how beautiful it turns out.

Glue the pigtail to the headband, leaving 3-4 centimeters from the edges.

Making lily flowers

Now the most difficult part - you need to make kanzashi lilies to decorate the headband. For greater clarity, it is better to use a schematic image. Take a blue and yellow satin ribbon. Cut 5*5 cm squares, 25 pieces of each color.

Fold the square diagonally into the lower left corner. Then again diagonally only to the upper left corner. And fold it a third time to get an envelope. Cut off the bottom corner. Glue with fire. Press with tweezers. By the way, we have an article about the types and selection of tweezers for needlework.

On the reverse side, cut off the excess part so that the product takes on the shape of a petal. Fire seal the ends.

Make the rest of the kanzashi petals for the lily with your own hands.

Glue the seven petals together.

Glue a half bead in the center. For the headband you will need three of these flowers: yellow and two blue. Glue the stamens on the back side.

Glue the two petals together, placing a thread of stamens of a contrasting color in the center. They are needed to decorate the beautiful edge of the kanzashi-style rim.

Flowers made from satin ribbons using the Kanzashi technique

The Kanzashi technique, judging by its unusual name, comes from Japan, which has unusual names and names of dishes. Here they managed to come up with such a name for this technique, I wonder why?

Previously, such a word was said when mentioning hair jewelry, but now in modern times this word has migrated to decorate and decorate boxes, jewelry, and also to create topiaries.

ON A NOTE! In this technique there are 2 shapes - round petals and sharp, other shapes are made by combining these two shapes.

To create flowers using this technique you will need:

• Yellow and green ribbons - 2.5 cm wide
• Felt for the circle serving as the base – 7 cm
• Black ribbon – 1/40 cm
• Brown tape - 1/50 cm to create the center

Process of creation:

1. Cut the yellow ribbon into pieces equal to five centimeters in width.
2. The yellow flap is folded so that the front side faces outward.
3. Take the edges of the petal, where the oblique line is located, and cut it off. You need to try to hold the material firmly in your hands.
4. The edge that was cut is cauterized
5. The petal is straightened and the lower edges are folded towards the center. To fix it, use a lighter, while pressing the edges with your fingers.
6. The same is done with other flaps. There should be eighteen petals in the 1st row, fourteen in the 2nd row.
7. The brown ribbon is threaded onto a thread using a needle, wrinkled. The same is done with the black ribbon. The result is accordions.
8. A snail is assembled from a black accordion, twisted in a circle and sewn together with thread.
9. Using a glue gun, glue this product onto a circle of felt. Glue the petals to the edges.
10. They do the same with the 2nd row. A brown accordion should be visible at the end.

The finished product can be decorated with beads or figurines if desired.

At home, in this way, a whole picture is created that you look at and admire!

Brooch made of satin ribbons

You will need: green satin ribbon 2.5 cm wide, yellow satin ribbon 0.5 cm wide, regular and curly scissors, thread with a needle, a piece of felt, a pin, beads.

Master Class

1. Prepare 20 pieces of green ribbon 8 cm long and a square of felt for the base of the brooch.
2. Fold a piece of ribbon in half and sew it at a diagonal angle to the felt. Thus, sew all the pieces to the felt in a circle, overlapping each other.
3. Cut out a small circle of felt with curly scissors and attach it to the back of the workpiece.
4. Prepare 20 pieces of yellow tape, 5 cm long.
5. Cover the inner circle with yellow pieces in the same way as the outer one.
6. Sew beads into the center of the brooch.
7. Attach a pin on the back side.

The satin ribbon brooch is ready! I recommend watching this video!

DIY: DIY satin ribbon rose clip | kanzashi | hair clip with satin ribbon rose

Watch this video on YouTube

DIY satin ribbon lilies. Master Class

Master class with step-by-step photos: “Oh, these delightful lilies”
Author: Belashova Tatyana Anatolyevna, teacher, teacher of the first junior group of MDAOU General developmental kindergarten No. 11, Korenovsky district.
Master class: DIY lilies from ribbons

The master class is designed for teachers and parents, as well as children of senior school age.
Purpose: this work can serve as a wonderful birthday gift or a wonderful interior decoration. Goal: making lilies from white satin ribbon. Objectives: To teach techniques for working with satin ribbons and its processing. Develop aesthetic perception, fine motor skills, and creative abilities. Cultivate neatness and artistic taste. White lilies have always caused a surge of inspiration among poets. They wrote beautiful poems about lilies. Very delicate and beautiful flowers with a fragrant scent. Pale, tenderly bashful, Silent flowers bloomed in the swamp wilderness of White lilies, And the reeds rustled around. White lilies, silver flowers grow from the deep bottom, where golden rays do not shine, where the water is cold and dark. And criminal passions do not attract them, Their worries do not call to them; Inaccessible to immodest eyes, They only live for themselves. Imbued with a firm determination to live the dream and reach heights, silent flowers bloom with the proud pomp of white lilies. The passionless ones will blossom and fade, Far from human possessions, And they will blossom again, beautiful, - And no one will know about them. Author of the poem: K. Balmont Description: For some reason, craftswomen love the lily flower very much as a craft, because a lily can be made from paper, crepe paper, and plastic bottles.
A lily made from satin ribbons with your own hands looks very interesting. Such a flower (if made separately) can decorate a hairpin, a hat, an elegant summer handbag, or a bridal bouquet. A worthy use for this flower is, of course, a bouquet that can decorate your interior. Making a lily from satin ribbons requires a lot of time, it takes the process of processing each petal, and if you try really hard, even a novice master can handle such a bouquet. Well, to make such a bouquet we will need the Necessary Materials:

1. White satin ribbon 2. Glue gun 3. Ruler 4. Scissors 5. Pencil 6. Vase 7. Green felt 8. Candle 9. Eye shadow 10. Brush 11. Fabric 12. Dull knife for creating veins 13. White chintz fabric 14. Beads 15. Strongman glue 16. Artificial twig

Step-by-step work process:

Step one:

You need to make a template of petals and leaves from cardboard, the size shown in the photo.

Step two:

Next, take the tape, scissors and petal template. You can trace one at a time, you can fold the ribbon like an accordion and cut out five petals each. And so we need to cut out 27 petals, for three flowers

Step three:

We take a candle and cut out petals, and scorch each one from all sides. To get a wavy edge, stretch the petal a little, singe 3cm, pull it back and forth with both hands. Our blanks are ready, let's start giving a natural shape

Step four:

We take a dull knife, heat it on a candle and make veins on the back side, it is advisable to put fabric under the petal, I have a grandson’s diaper. The result is a petal with veins, let’s look at the whole stage in the photo

Step five:

add color using eye shadow, paint as you wish, but so that the lily looks like a real one. Our petals are ready

Step six:

flower assembly. Take white fabric, fold it into five layers, draw a circle with a diameter of 4.5 cm and cut it out.

We have everything ready. Glued the first tier - 5 petals in the middle of the circle. Then the 2nd tier - also 5 petals. But these petals need to be folded at the bottom and glued together so that the flower holds its shape. Using an awl, we make a hole in the middle of the flower. We put the flower on the stem and secure it with glue at the base. And we twist the remaining fabric and decorate the bottom of the flower, tape with tape or a cut strip of felt.

Step seven:

we make stamens, a thin stick from ear sticks, first dip them in glue, and then roll them in beads. Our stamens are ready. Now, using thermal glue, glue the stamens into the middle of the lily.

Step eight:

We make buds from the tape, cut the tape 20cm, twist, fold and glue

We put each flower on a twig, just like the first one, our twig is ready

Step nine:

make leaves, take floral felt, cut out leaves according to the template These are the leaves, and fold each leaf in half. Everything is ready, now we will glue each leaf to the branches

Step ten:

Using a glue gun, we glue the leaves. Now we carefully straighten the leaves and petals on each flower and we have a bouquet like this, let’s look at it from all sides

Thanks to everyone who watched. I wish you creative success!!!!!!!!!!!!!!!

We recommend watching:

Panel made of satin ribbons Roses with your own hands Flower using the kanzashi technique. Master class Flower made of satin ribbons. Master class with step-by-step photos Lily made of fabric. Master class with step-by-step photos

Similar articles:

DIY flowers made from satin ribbons. Master Class

Roses made of satin ribbons. Master Class

DIY roses from satin ribbons. Master Class

Crafts for Mother's Day. Painting of flowers

Kanzashi headband. Master Class

Technique for making mk petals

Production begins with the petals. Having drawn three narrow petals and three wider ones, we begin the process. Using a thin ribbon, sew three petals with reverse stitches.

Take a 12mm white ribbon and fasten it to a needle, making a tack. We draw our needle on the front side in the center of the drawn petal. Next, fold the ribbon underneath:

We pierce the center of the fold with a needle and pull the ribbon down without tightening the petal too much:

Turn the tip of the third petal slightly to the side when bending.

Consists of 6 petals, three of them are larger. Try to show the actual size of the flower in your picture.

When making flowers, it is very important to leave a little space in the middle, because there will still be pistils with stamens there.

Now wide petals follow the same principle as narrow ones. This is what all six petals should look like:

1. Since the 25mm ribbon is very wide, and we need to easily pull it into the eye of the needle, we will need to cut the tip obliquely not at 45 degrees, but at 25. Do not forget to make a tack.

Most novice needlewomen make a big mistake by tightening the stitches too tightly; this will only worsen the appearance of the painting, because the fabric inside will warp.

For more experienced craftswomen, we can advise you to make the petals using a reverse stitch, but starting from a French knot. It’s just that the reverse stitch is more suitable for daisies, and for lilies, as you know, the petal is slightly curved and it should be noted that water lilies are embroidered using the same principle, only there should be twice as many petals and they should not be curved towards the bottom, as in this case , and to the top.

Petals coloring page

When six beautiful petals look at you, it's time to decorate. It is advisable to use acrylic paints; they do not cause smudges or streaks. The inside of the petals is lightly moistened with water and a small amount of orange paint is applied with a brush, evenly distributed over the middle of the petal.

If you notice that the paint has begun to spread, you need to stop this process as quickly as possible. In this case, a hairdryer will come to your aid; they need to dry the problem area of ​​the flower and you can continue.

Adding spots to the flower

People who have seen a lily at least once in their life remember that the spots in the middle are an integral element of the flower; if you want your picture to be realistic, then they also need to be depicted.

Black henna is used for this. Or you can make the mixture in another way. Like this, for example:

1. Mix brown paint with a small amount of PVA glue.
2. Apply the resulting liquid to a toothpick and make small dots along the bottom of the petal.
3. You can again speed up the process using a hairdryer.

Boy's bow tie

You will need: blue satin ribbon 5 cm wide, elastic band, fastener, ruler, scissors, blue thread, needle, stationery pins.

Master Class

1. Prepare: two pieces of ribbon 11 cm long, one piece 25 cm long and one piece 7 cm long.
2. Take an 11 cm piece of tape, fold it at a right angle, bend it in half and secure it with a pin. Make the second piece in the same way.
3. Make running stitches on one piece, then, without breaking the thread, on the second.
4. Pull the thread and fasten the parts together. Set the item aside.
5. Fold a 25 cm piece in half, mark the center, then unfold.
6. Fold the edges towards the center, making an overlap of 1 cm.
7. Place running stitches, pull the thread and wrap it around several times.
8. Sew the two butterfly pieces together.
9. Fold a rectangle from a 7 cm segment. This will be the jumper.
10. Sew fasteners to the elastic, glue the butterfly to the elastic and wrap it with a jumper.

The satin ribbon bow tie is ready!

Lily

To create a lily with your own hands, you will need white satin ribbons, so let’s look at the creation steps:

1. Eighteen pieces are cut, the length is 6.5 cm. Putting them together, cut out a petal for the lily according to the template.
2. Burn the edges, holding the front side away from you.
3. They form veins on the petals, use a knife on the non-cutting side for this, draw veins in the amount of six.
4. The petals of the 1st row are attached to the finished base of 4 cm, which is made by folding the ribbon in two.
5. The petals of the 2nd row continue to be glued, and the 3rd row consists of six petals, it is left for a while.
6. Collect the beads on a fishing line, spray 2 rows with varnish, while straightening them.
7. When the varnish is dry. Glue the last row, stamens.

Our lily is ready!