A clown costume is a universal outfit for any fun children's party. It is suitable for a school carnival for the New Year, as well as for a matinee in kindergarten or celebrating a child’s birthday at home. To make a clown costume with your own hands, you do not need to have any special cutting or sewing skills. It is easy to sew from scrap materials, even without a pattern, in just a few hours.
Costume Ideas
The good thing about a New Year's clown costume is that its design has no boundaries for creativity and flight of fancy. This outfit can be easily made from scrap materials or put together from items from your wardrobe, adding bright accents. And he will delight the baby for many years. Its elements can be:
- tights;
- overalls;
- bright T-shirt;
- colored shirt;
- voluminous jacket;
- fluffy skirt;
- multi-colored leggings or bloomers.
As accessories that will complement the image and make it complete, select a wig, a hat, a cap or cap, an overlay collar and cuffs made of organza or foam rubber, and huge boots. Each year, various elements can be replaced with others and the costume will always look new.
Choosing a style for a men's suit
In order to create a harmonious image of a clown, you will need, first of all, imagination. It is also important to properly organize the creative process so that the costume is ready in a matter of hours. The clown outfit does not have any specific standard of clothing, so you can safely experiment. We can highlight the main elements of a men's suit, which can vary depending on personal preferences:
- colored tights or trousers;
- wide shirt or T-shirt;
- cap, cap, cap or hat;
- frill - special lining around the gate;
- bright makeup;
- false nose;
- wig.
ATTENTION! The simplest clothing option would be a one-piece jumpsuit. Just remember the clown in a bright yellow jumpsuit from the McDonald's advertisement.
New Year's suit for a boy
Making a children's costume for a boy is quite simple. You can sew a basic New Year's jumpsuit in one evening. Among other things, this option is quite beneficial from different angles. The loose fit will allow you to use the outfit for more than one year, and if the holiday takes place in a cool room, you can wear a warm sweater underneath. For work you will need:
- textile;
- pins;
- scissors;
- threads, needles;
- tape measure;
- cardboard;
- natural or artificial fur with long pile;
- sewing machine.
The procedure for preparing a costume for the New Year is as follows:
- First you need to cut the fabric according to the pattern and trim the edges. If one fabric is missing, materials can be combined.
- From contrasting fabric, cut out large pieces for patch pockets and long ribbons for straps.
- Sweep away all the details and do the first fitting.
- Sew the elements of the overalls on a machine and iron.
- If necessary, gather the suit at the waist with an elastic band.
- Make large multi-colored pompoms from thick knitting threads and sew them to the chest part of the overalls.
- Instead of pompoms, you can sew deliberately large buttons from fabric on a cardboard base with a diameter of 5-7 cm.
- Make a large rounded patch collar from white cotton fabric. A beautiful collar is made from organza flounces. The collar, cut from thin foam rubber, looks original.
- Sew a cap out of fabric or make a cap out of thick paper. This hat with red fur trim can act as a clown wig. Attach an elastic band to the base so that the cap does not fall off the child’s head.
- The finishing touch is the right shoes. It is better not to take large shoes. A more suitable option for a child would be sneakers or Czech shoes.
If your baby loves the costume, but he has outgrown it, next year you can shorten the pants and wear bright striped knee socks underneath.
Accessories for the suit
The main clown accessory is a kind of round nose. You can purchase it at a specialized store or make it yourself using regular foam rubber. An ordinary bath or dish sponge will do the job. You need to cut a piece about 1 cm thick from it. This is convenient to do with an ordinary stationery knife.
Using a cup or glass, draw a circle on the foam and cut it out. Place large stitches along the edge of the circle and pull the edges together. Attach a thin elastic band to the nose and paint it in the desired color with regular gouache.
Clown outfit for a girl
Girls, as a rule, love to dress up and follow fashion, which changes every year. Therefore, you will have to work hard to ensure that a child’s costume for the New Year is expressive, original, beautiful, and modern. To sew such a costume, you need to carefully think through the details and stock up on the necessary materials and tools:
The work order is as follows:
Master class “Nose for the clown Klepa”
Vera Aleksandrovna Filimonova
Master class “Nose for the clown Klepa”
In the photo is my daughter Button
I bring to your attention my next MK. While preparing a costume for my heroine Klyopa for the New Year's party, I was faced with the fact that I needed a clown nose . And I wanted to make it real, like in childhood. The nose is made from a kinder egg, which is not real at all, from a ping pong ball is too big and the biggest drawback of these two noses is that they are hard. But I wanted the nose to be soft and if the kids touched it, they would have a feeling of softness in their tiny hands. And so I went online to look for a master class on making a nose from foam rubber. And I came across a description of how to make such a nose and I decided to share the MK, maybe someone else will find it useful.
So let's get started, we will need:
— Foam sponge for shower;
- hand sewing needle;
- a mug of the required diameter.
I tried to cut carefully, since you can make several spouts from one sponge.
We draw a circle of the diameter we need, I took an ordinary tea mug.
And we begin to sew with small stitches using threads to match the foam rubber.
Constantly tightening the thread so that our foam rubber gradually takes on the shape of a spout; if we start to pull it at the end, it will not be very convenient, since the thread does not slide very well along the foam rubber.
We sew on an elastic thread of the required length and our nose is ready
Well, this is me and my nose at work. I sing songs with the guys.
Thank you all for your attention.
Notes for the lesson “Soap bubbles for the clown Klepa” Notes on the development of cognitive and research educational activities for children of primary preschool age on the topic: “Soap bubbles.
Summary of the entertainment “Klepa’s Journey to the Land of Road Signs” with children of the middle group using ICT Topic: “Klepa’s Journey to the Land of Road Signs” Date: 18.05. 2015 Integration of educational areas: “Social-communicative”,.
Master class “Caterpillar” In order to make a caterpillar, you will need: a sheet of colored cardboard, cotton pads, PVA glue, scissors, paint with a brush and scissors. Master class “Snow Maiden” I bring to your attention the application “Snow Maiden”. To do this, you will need ready-made forms from blue colored paper, glue, cotton wool, and coloring. Master class “Valentine” I present to your attention a master class for Valentine’s Day. Although many say that this is not Orthodox (not ours, it is Catholic. Master class “Valentines” The holiday of Valentine’s Day is coming soon! Happy Valentine’s Day! On this holiday we are united: We celebrate, have fun, Don’t smile. Master- class "Snowflakes" Snowflakes The holiday is approaching - New Year and again we are faced with the task of how to please the kids? I suggest making simple ones.
Source
Clown costume for adult
The New Year's holiday will be unforgettable for the child if parents also join the carnival masquerade in unusual costumes. One of the easiest options for this is a clown outfit. Every year it can be updated with new interesting details. The basis of a suit for dad can be the following elements:
You can make a New Year's costume for your mother from the following details:
A little imagination - and you will create a beautiful and unique outfit with your own hands. Combine, mix, experiment - a clown costume is exactly the case when it’s difficult to overdo it. Watch similar master classes:
Comments
We sew a toy from scraps of fabric
To make this type of clown, you will need to find many different pieces of fabric - these could be scraps or old unnecessary things that you don’t mind cutting. The main thing is to have a variegated and bright color. In addition, prepare the fabric that will go on the body (here it is better to choose a plain material) and filler (sintepon, cotton wool). To make hair, you will need threads or yarn for felting, depending on what kind of hairstyle you plan for your clown. However, you can use other materials that are suitable for the hair of textile dolls - satin ribbon, tresses, boucle yarn, etc.
Take the patterns and transfer them to the fabric. You should end up with four pieces - one head, one cap and two mirror pieces for the body in two colors. To assemble the body, fold the two pieces right sides inward (different colors), align and sew along the center line. You need to do the same with the two remaining elements. Press the seams well and fold the front and back pieces together (facing each other). Sew along the contour, but leave a gap on the sewing line for the head. Turn the body inside out, iron and stuff with filler. To form the arms and legs, make small balls of stuffing and push them tightly into the very end of the leg. Take a double thread and bring it from the inside to the outside where there is a double layer of fabric with allowances and then go through the top layer of material in an arc. Sew in the same way on the reverse side, pulling the thread tightly and tightly so that your ball does not slip away. This way you will gradually be able to make arms and legs. Now you can grab your head. As in the previous master class with circles, this round piece also needs to be sewn with a basting stitch along the edge and pulled together, filled with stuffing. Before sewing the head to the body, run basting stitches along the neck line to tuck the allowances inward. Sew the head, and then run a basting stitch from the neck to the armpits of the toy (grab the back and front together). Tighten it well. Sew a cap for the clown, and gather lace around the neck. You can embroider or draw eyes on him and brown his cheeks.
Let new beautiful soft toys made by yourself delight your children and inspire you to make new interesting crafts.
Comments
New Year's suit for a boy
Making a children's costume for a boy is quite simple. You can sew a basic New Year's jumpsuit in one evening. Among other things, this option is quite beneficial from different angles. The loose fit will allow you to use the outfit for more than one year, and if the holiday takes place in a cool room, you can wear a warm sweater underneath.
To work you will need:
- textile;
- pins;
- scissors;
- threads, needles;
- tape measure;
- cardboard;
- natural or artificial fur with long pile;
- sewing machine.
The procedure for preparing a costume for the New Year is as follows:
- First you need to cut the fabric according to the pattern and trim the edges. If one fabric is missing, materials can be combined.
- From contrasting fabric, cut out large pieces for patch pockets and long ribbons for straps.
- Sweep away all the details and do the first fitting.
- Sew the elements of the overalls on a machine and iron.
- If necessary, gather the suit at the waist with an elastic band.
- Make large multi-colored pompoms from thick knitting threads and sew them to the chest part of the overalls.
- Instead of pompoms, you can sew deliberately large buttons from fabric on a cardboard base with a diameter of 5-7 cm.
- Make a large rounded patch collar from white cotton fabric. A beautiful collar is made from organza flounces. The collar, cut from thin foam rubber, looks original.
- Sew a cap out of fabric or make a cap out of thick paper. This hat with red fur trim can act as a clown wig. Attach an elastic band to the base so that the cap does not fall off the child’s head.
- The finishing touch is the right shoes. It is better not to take large shoes. A more suitable option for a child would be sneakers or Czech shoes.
If your baby loves the costume, but he has outgrown it, next year you can shorten the pants and wear bright striped knee socks underneath.
Choosing a style for a women's suit
The image of a clown, in contrast to the male image of a clown, is more sophisticated. Here you can use various options for skirts in combination with colorful leggings. It is not so difficult to sew a skirt with your own hands from tulle or mesh. You can buy a wig in a store or make it yourself. For example, you can use “rain” as strands, which is usually used to decorate a New Year tree. For such a wig, it is better to use several shades at once for greater pomp. It’s also not difficult to make a nose for a clown yourself from foam rubber, which can be painted with hypoallergenic paint. Then, after the foam has dried, an elastic band is made to hold the nose securely.
IMPORTANT! The clown costume will be complete if you also choose the appropriate shoes. You can experiment with old shoes that you wouldn’t mind painting in bright acrylic paint. Any colored shoes or boots will immediately enliven the look.
Instructions
By following the necessary recommendations and advice, you can make a clone costume yourself. Moreover, the main elements can not even be sewn, but can be found in your own wardrobe.
Fabric preparation, cutting
For a women's suit, it is better to make a spectacular tutu skirt. Material consumption will depend on the desired length and splendor of the products. You will need about 3 meters of tulle for a medium full skirt. It is necessary to cut strips of fabric. Their length should correspond to the desired length of the skirt, multiplied by two. It is better to take a width of up to 20 cm. Next, take a regular elastic band up to 4 cm wide, and a length equal to the waist size minus a couple of centimeters. It is sewn into a ring and placed on the back of a chair. The resulting strips are folded in half and attached to an elastic band using a knot. In this simple way you can cut out and “sew” a skirt. It’s also easy to sew elastic straps on it and decorate them with pom-poms.
REFERENCE! To make a full skirt, buy several contrasting shades of tulle. To make the skirt have a more voluminous shape, you should take both soft and hard tulle and combine them.
If you have no experience in making patterns, then for a men’s suit it is safer to take a ready-made pattern for pajamas, overalls or jackets. You can also trace existing pants and transform them into overalls by drawing the top and straps yourself. A clown's clothes should be wide, spacious, comfortable and even baggy. Therefore, to the resulting details outlined from simple clothing, you can safely add 5 to 10 cm in width. It depends on the author's intention. There are no special requirements for the material. The main thing is that it is bright, noticeable and easy to sew.
Since men's suits are most often multi-colored, the resulting pattern should be divided into component elements, be sure to number them or label each detail by color, so as not to get confused in the future. You should add up to 2 cm for processing seams. Also, think in advance about the design features of the product: the presence of zippers, buttons, elastic bands, special pockets, etc.
Sewing an outfit
If the suit is sewn for one time, then you should not pay special attention to the quality of tailoring. Sewing includes the following stages of work:
- After all the elements of the costume are cut out, you need to start grinding them together to get, for example, one-piece parts of the front or back of the jumpsuit;
- Next, the seams should be thoroughly ironed to avoid excess fabric thickness and unevenness. The result is a peculiar combination of several fabrics;
- Sewing basic elements together. In this case, it is necessary to leave space for fasteners;
- Sewing on zippers or buttons, if provided;
- Processing of product cuts on sleeves and trouser legs. You can do the usual hem of the fabric inside, or you can sew on elastic bands or cuffs;
- Sewing a collar, frill or straps for overalls;
- Decorating the product with decorative elements.
Sewing jackets is a more complex process and is suitable for experienced seamstresses. Of course, you can always order a suit from a studio or buy a ready-made one, but even beginners can make simple options.
Creating Additional Attributes
Interesting attributes or accessories will help add some zest to your look. For example, the simplest attribute of a clown is multi-colored balloons or an umbrella, which can also be interestingly decorated to match the suit. A memorable detail will be a striped scarf, a bow for the neck, twice or even three times as wide as usual. A headdress is also considered an important accessory. It is worth noting here that the cap or hat should stand out as much as possible and be of a rich shade.
You can make it yourself, for example, a cap. To make it, you need to roll a sheet of paper into a cone, then apply glue along the joint and connect the sides. And for a more impressive look, you can glue tulle to the bottom of the cap. It’s easy to experiment with a regular hat by gluing bows or any other details onto it that will go well with the look.
Thus, there are a huge number of options and opportunities to make your favorite character’s costume on your own. We hope that this article will be useful and inspire you to create interesting things.
Clown outfit for a girl
Girls, as a rule, love to dress up and follow fashion, which changes every year. Therefore, you will have to work hard to ensure that your child’s costume for the New Year is expressive, original, beautiful, and modern.
To sew such a suit, you need to carefully think through the details and stock up on the necessary materials and tools:
- multi-colored scraps of thin transparent fabric (organza or tulle);
- wide nylon tapes;
- multi-colored pieces of cotton;
- wide bodice;
- bright pom-poms;
- hairband;
- pins, needles, threads;
- scissors;
- measuring tape.
The work order is as follows:
- First of all, you need to measure the girl's waist. Using this measurement, sew a corsage ring.
- Cut the fabric into strips 7-10 cm wide. The length of the flaps should be 2 times longer than the planned length of the skirt.
- The blanks are folded in half and pinned to the elastic band. Instead of fabric, you can use ready-made wide nylon tapes.
- When the fluffy organza petticoat is ready, a fluffy outer skirt made of bright cotton scraps is sewn on top.
- Two wide strips are used to make straps that are sewn to the waistband of the skirt.
- A bright clown blouse will be decorated with a collar of lush flounces, large pompoms, and bright buttons.
- You can wear wide striped leggings on your legs. If the costume has a lot of colorful details, the image of this character will be well complemented by white tights.
- A miniature hat with a rim or cap will add a mischievous look to the little clown. A large pink or yellow bow made of thin foam rubber will also fit organically.
- It is better to replace clown boots for girls with bright, feminine shoes or slippers.
Makeup for a clown
Before the celebration, it is advisable to practice and practice applying makeup with your own hands . It is not very convenient to use products from a ladies' cosmetic bag as materials. Professional clown makeup, such as is used in theaters, requires skill and is difficult to wash off. It is suitable for regular use during long events and will help if the clown performs at a distance from the audience. If the party will be held indoors and the image is not planned to be used often, it is better to purchase a special set. Typically, face painting is created from hypoallergenic materials and is suitable for use by children.
White clown image
First of all, using a black pencil you need to outline the lines of future makeup.
Large arches should extend above the eyebrows. The edges of each should be drawn at the level of the corners of the eyes, retreating 1.5-2 centimeters from them. Using the same pencil, draw a large oval around the mouth. The bend, directed upward by the edges of the oval, creates a semblance of a smile. The space inside the contours is filled with white paint using a powder puff. The outline is drawn with black paint. They complement the look with a clown nose or tint the nose with red paint. The cheeks also stand out with bright red spots. You can diversify your look with different colors. You can color the space inside the outline with any shade. The main thing is to maintain the contrast between the outline and the fill. In this image, you should pay attention to the symmetry of the lines. The type of eyebrow and lip pattern affects the emotional perception of the clown. For a sad version, the corners of the lips should be lowered. The image can be complemented with an imitation of a tear. You can draw it in the form of a diamond with an elongated upper corner extending from the eye.
Pierrot's appearance
To look like Pierrot, you need to completely whiten your face. Particular attention should be paid to the eyelids and lips. The eyebrows resemble cat ears, with the tips moved towards the center of the forehead. They are located slightly above the natural eyebrow growth line. The look also looks good with asymmetrical eyebrows. Vertical black stripes in the center of the lower and upper eyelids create a sad expression on the face. It also looks appropriate to highlight only the lower eyelid with a pencil with an elongated triangle down the center. Those who are confident with a brush should try playing with dark accents around the eyes. An oblong tear from the outer corner of the eyelid along the cheek is used as an accent.
Evil clown makeup
A scary clown would look appropriate for Halloween. Grimm for it can be borrowed from horror movie characters. Purchased false teeth can be a good accent. You can simply draw a terrifying grin instead of a smile. Shades of red around the eyes will help enhance the effect. If you draw triangles from the lash line of the upper eyelid, directed upward to the edges of the hairline, you can give the face a sinister expression.
If you extend the lip line in red towards the ears, you can successfully imitate a cut. This accent is very memorable, as exemplified by Batman's Joker. The impression can be aggravated if the part of the face above the drawn line of the mouth is whitened and the lower part is darkened. Red streaks down from the lips will help complete the look. The appearance of a scary clown is harmonious with blurred contours and displaced details.
Pennywise image
Another example of a scary clown can be seen in the movie It. In the image of Pennywise, facial proportions play a big role. To bring it to life, you will need a bald patch that will visually lengthen your forehead. You can replace the accessory using a regular plastic bag; to do this, you need to glue it to your forehead using eyelash glue or latex. Polyethylene glued on one side is fixed in the hair with invisible pins. A white makeup base is applied to the face and package, masking the transition and natural hair.
The lips are outlined in red, repeating the shape of Pennywise's mouth, the corners rise to the center of the eyes and continue above them. Eyebrows, unlike most other clown images, are drawn round, thin and small. The tip and wings of the nose, as well as the lower part, are painted red. False teeth will help achieve a complete resemblance. This is enough to make a clown from a horror movie recognizable and creepy. You can also draw a toothy smile on your own lips.
Clown costume for adult
The New Year's holiday will be unforgettable for the child if parents also join the carnival masquerade in unusual costumes. One of the easiest options for this is a clown outfit. Every year it can be updated with new interesting details.
The basis of a suit for dad can be the following elements:
- Cardboard clown hat or cap with a pompom.
- Satin bloomers or jumpsuit.
- A bright T-shirt or plaid shirt, decorated with daisy flowers from pieces of fabric.
- An oversized jacket with rolled up sleeves, decorated with multi-colored patches.
- Round toe boots or sneakers.
You can make a New Year's costume for your mother from the following details:
- Short dress with a full skirt.
- Large patch collar.
- Small hat or plaid beret.
- Striped leggings, leg warmers.
- Colorful shoes with rough heels.
A little imagination - and you will create a beautiful and unique outfit with your own hands. Combine, mix, experiment - a clown costume is exactly the case when it’s difficult to overdo it.
Among all the costumes intended for New Year's parties, the clown outfit stands out. The reason for this is the range of bright materials used in its manufacture.
At first glance, creating this look may seem very difficult, which forces you to buy a ready-made suit or opt for sewing another option. However, parents who do not have much experience in sewing can also please their child with a homemade outfit.
What should a clown costume consist of?
The main part of the costume should consist of striped elements in bright colors. Sewing them yourself is quite difficult if you do not have the appropriate skills. The good news for these parents is that they can use pajamas or onesies in matching colors that are found in the child’s wardrobe. A good addition to them would be socks and shoes of a similar design.
A paper cap is suitable as a headdress. There are times when parents prefer to sew a multi-colored hat.
The most important element of the outfit is a false clown nose, which you can buy separately or make yourself by painting the foam rubber red.
Accessories such as a bright wig, a fluffy collar (jabot), and bright makeup will help complete the look.
Of all the above, the most difficult will be to make a frill.
Add-ons
The costume will be perfectly complemented by clown makeup, a bright multi-colored wig, a cap, large buttons at the top of the product, as well as a red foam nose. All additions can be bought in the store, and the nose can be made yourself.
Clown nose
To make a clown nose, you will need:
- red dish sponge;
- elastic thread 30 centimeters;
- threads; needle;
- scissors;
- stationery knife.
Cut the sponge lengthwise, dividing the sponge into equal flat halves. From the soft part, cut a circle with a diameter of 8-10 centimeters.
Sew the circle around the perimeter using a regular stitch and tighten the thread. Use a needle to thread an elastic thread through the middle of your nose. The nose is ready.
How to make a frill?
To create this part of the outfit you will need scissors, cardboard, colored paper and glue.
The collar manufacturing process consists of the following steps:
- gluing a cardboard ring, the diameter of which will be greater than the thickness of the child’s neck;
pasting the ring with colored paper;
creating the main part of the frill from colored paper by evenly folding it into equal parts, the height of each of which corresponds to the height of the ring;
gluing the collar elements to the ring.
After drying, the collar will be ready.
DIY clown from scrap materials
You can make a fun toy from anything - disposable paper cups, plastic bottles, buttons. The main thing is not to restrain your imagination, to involve your loved ones in creativity, regardless of their age.
Crafts from cups
If you have bright disposable plastic cups, forks or spoons left after the holiday, you can turn them into a cheerful circus performer.
In addition to the basic elements, you need to prepare double chenille wire, double-sided tape and scissors, and print out an image of the clown’s face.
We turn the glass upside down, make two holes opposite each other, thread the wire through them and form handles at its ends. We cut out the face, glue it onto a plastic fork (spoon), and insert it into the hole in the bottom of the glass. We make legs from wire and attach them. The cheerful clown is ready.
Should I apply makeup?
The presence of makeup perfectly complements the image of a clown. Many parents consider it necessary to apply it. At the same time, it is worth remembering that children are not accustomed to makeup and can accidentally break it during a matinee. For this reason, it is better to refrain from using this element.
The need to use a sewing machine often forces parents to give up making their own carnival costume. A clown outfit made from scrap materials proves that excellent results are achievable without the use of special equipment.
A situation familiar to every second person: the pre-holiday bustle and trotting around grocery and souvenir shops distracted from more important acquisitions. It so happened that tomorrow is a children's party, but the New Year's masquerade has not been purchased. Don’t be upset and don’t let your child be sad because of such a little thing! You can make an outfit for your baby from what you have on hand. For example, a clown costume from my mother’s old dress. Very quickly, without material costs and special skills. All you need is a wild imagination and an hour of time.
Materials for work:
Old (preferably very bright) mother’s dress – 1 pc.; Elastic narrow tape (elastic band) – 35 cm; Remains of brightly colored knitting threads – several balls; Thread, needle, sewing machine.
Stages of work:
First stage: preparing the base.
We are looking for a suitable dress in my mother’s old things.
Unzip the zipper on the back half of the dress from bottom to top by 20-25 centimeters.
We cut the front half of the dress (hem) to approximately the same distance. If there is no zipper on the dress, then an incision must be made on both the front and back halves of the hem. Second stage: forming the trouser legs.
We turn the dress to the left side.
We connect the front and back parts of the dress along the cut line. Using the front part of the cut, we “wrap” the zipper. Stepping back 1 centimeter from the edge, sew the connected parts of the cut. At the junction of the cut, we make a seam perpendicular to the bottom line of the dress. The result is the legs of the overalls.
Cut the elastic tape in half.
We sew an elastic band along the bottom edge of each pant leg, pulling it tight. The result is an assembly that does not allow the pant leg to fall off. This is why the length of the dress does not matter. Third stage: making pom-poms.
Cut out two circles from cardboard. Cut out small circles in the center of each circle (the smaller the inner circle, the larger the pompom you will get). Cut out part of the side of the circle. We select the remaining knitting threads that match the color. Place a thread on one cardboard circle across the entire width (2-3 layers), leaving the edges on the cut-out line of the side of the large circle. We place the second cardboard circle on top of the thread, matching the cutout lines. We wind the knitting threads onto folded cardboard circles. We insert scissors between the cardboard circles and cut the winding. We tie the ends of the thread inserted inside the cardboard circles into a knot, pulling it tightly. It turns out a pompom with a tail. If you wrap cardboard circles with threads of different colors, the pompom will turn out to be multi-colored.
There is probably no child who doesn’t love the circus. A clown costume for the New Year or a costumed masquerade ball is the dream of not only boys, but also girls. You can easily sew such an outfit from scrap materials; any mother or grandmother with basic skills in working with a needle and thread can cope with the task.
Clown boy is always fun
. You can, of course, buy a clown outfit, but store-bought costumes are rather faceless and of the same type. In addition, it is difficult to find the right size. Therefore, the best way to help your child stand out from the crowd and cheer up all the kids at the party is to make him a circus performer’s outfit yourself.
Makeup for a clown
Before the celebration, it is advisable to practice and practice applying makeup with your own hands . It is not very convenient to use products from a ladies' cosmetic bag as materials. Professional clown makeup, such as is used in theaters, requires skill and is difficult to wash off. It is suitable for regular use during long events and will help if the clown performs at a distance from the audience. If the party will be held indoors and the image is not planned to be used often, it is better to purchase a special set. Typically, face painting is created from hypoallergenic materials and is suitable for use by children.
White clown image
First of all, using a black pencil you need to outline the lines of future makeup.
Large arches should extend above the eyebrows. The edges of each should be drawn at the level of the corners of the eyes, retreating 1.5-2 centimeters from them. Using the same pencil, draw a large oval around the mouth. The bend, directed upward by the edges of the oval, creates a semblance of a smile. The space inside the contours is filled with white paint using a powder puff. The outline is drawn with black paint. They complement the look with a clown nose or tint the nose with red paint. The cheeks also stand out with bright red spots. You can diversify your look with different colors. You can color the space inside the outline with any shade. The main thing is to maintain the contrast between the outline and the fill. In this image, you should pay attention to the symmetry of the lines. The type of eyebrow and lip pattern affects the emotional perception of the clown. For a sad version, the corners of the lips should be lowered. The image can be complemented with an imitation of a tear. You can draw it in the form of a diamond with an elongated upper corner extending from the eye.
Pierrot's appearance
To look like Pierrot, you need to completely whiten your face. Particular attention should be paid to the eyelids and lips. The eyebrows resemble cat ears, with the tips moved towards the center of the forehead. They are located slightly above the natural eyebrow growth line. The look also looks good with asymmetrical eyebrows. Vertical black stripes in the center of the lower and upper eyelids create a sad expression on the face. It also looks appropriate to highlight only the lower eyelid with a pencil with an elongated triangle down the center. Those who are confident with a brush should try playing with dark accents around the eyes. An oblong tear from the outer corner of the eyelid along the cheek is used as an accent.
Evil clown makeup
A scary clown would look appropriate for Halloween. Grimm for it can be borrowed from horror movie characters. Purchased false teeth can be a good accent. You can simply draw a terrifying grin instead of a smile. Shades of red around the eyes will help enhance the effect. If you draw triangles from the lash line of the upper eyelid, directed upward to the edges of the hairline, you can give the face a sinister expression.
If you extend the lip line in red towards the ears, you can successfully imitate a cut. This accent is very memorable, as exemplified by Batman's Joker. The impression can be aggravated if the part of the face above the drawn line of the mouth is whitened and the lower part is darkened. Red streaks down from the lips will help complete the look. The appearance of a scary clown is harmonious with blurred contours and displaced details.
Pennywise image
Another example of a scary clown can be seen in the movie It. In the image of Pennywise, facial proportions play a big role. To bring it to life, you will need a bald patch that will visually lengthen your forehead. You can replace the accessory using a regular plastic bag; to do this, you need to glue it to your forehead using eyelash glue or latex. Polyethylene glued on one side is fixed in the hair with invisible pins. A white makeup base is applied to the face and package, masking the transition and natural hair.
Pros of a homemade clown costume
Children's costume competitions are often held in kindergartens and primary schools. Usually such events are held during the New Year holidays, but there are also themed parties (for example, on the theme “circus”, “pirates”, “animals of Africa”, “inhabitants of the deep sea”). Sewing a children's suit
, especially with a baby, is a great opportunity to show your imagination and take a little break from reality, transport yourself to the exciting world of a fairy tale.
A clown costume for a boy is especially suitable for children who are timid and shy in everyday life. This outfit will help you relax, overcome your inhibitions and become more fun and sociable. But for the tomboys
who are used to being the center of attention, this is also a great option. Here are a few reasons to make such an outfit for a five to seven year old child:
Materials required for work
First of all, you will need bright material for work. You can take either brightly colored fabric or various colorful shreds (the more, the better). A clown is a case where you can’t “overdo it” with variegation and brightness. A circus performer's costume should look really funny, so the colors can be any, even the most ridiculous and garish
. You can make a clown hat from cardboard or thick paper, or you can buy a ready-made hat at any supermarket that sells various accessories for children's parties. To ensure that the headdress holds well, ribbons are sewn to it.
For cutting and sewing you will need:
Having prepared everything you need, you can safely get to work
.
Methods for making a nose
The nose for a clown can be made using the papier-mâché technique , from half a kinder or a ping-pong ball. But it’s better if the accessory is soft. This eliminates the possibility of chafing and discomfort during use.
To make a soft clown nose, a regular sponge will do. It is better to immediately choose a product of a suitable color, but in extreme cases, you can paint the finished part. A circle 1 cm thick is cut out of a sponge. The diameter of the workpiece determines the size of the future nose. For stitching, you need to use a thread that matches the color of the foam rubber. Using neat small stitches, the edges of the foam are sewn together, gradually tightening the workpiece into a rounded shape. An elastic thread is sewn to the finished product.
The nose can be made from red fabric. You will need to cut a circle with a diameter of 18-20 cm. Using a thread, the edges are carefully pulled towards the center. The filler is placed into the resulting blank. For this you can use cotton wool or padding polyester. To ensure that the product holds its shape, a plastic bottle cap is placed in the filler.
Description of the sewing process
First of all, you need to find a pattern and transfer it to the fabric. Before you make a clown costume at home, you need to cut out all the details using sharp scissors. Here is a general description of the work process:
You can put a “magic wand” in the clown’s hand - an ordinary pointer covered with foil, with a star made of shiny golden cardboard. And this will be not only a circus performer, but also a magician. The child himself can design his own makeup. From the age of five to six, children usually enjoy drawing with paints.
And. If you show your child how a clown paints his face before a performance, the child will certainly want to repeat it. There is no point in holding back children's imagination. The main thing is to use hypoallergenic dyes (for example, face painting specifically designed for face painting).
The New Year's clown costume can be safely complemented with shiny tinsel, sparkles, and Christmas tree “rain.” Large, bright buttons are sewn onto clothes, preferably in different colors, in contrast to the color of the fabric. A clown's hat can be anything, but most often it is a cap (like Oleg Popov's), a funny beret (like Yuri Kuklachev's) or a top hat from which you can pull out various wonderful things. Below are a few more accessories that every self-respecting circus performer should have:
Classic clown makeup is a white face, red nose and cheeks. When preparing for the holiday, you can explain to your child: circus performers do this so that they can be clearly visible to the audience even from the very last rows. Makeup should be bright, expressive and laconic. You should not draw intricate patterns on your baby’s face. Just one or two touches are enough, and the child will already turn into a cheerful artist.
Which makeup to choose?
Before you apply clown makeup, you need to decide whether you will deal with real theatrical makeup, use simple face painting, or, at worst, cosmetics and other improvised means.
Theatrical makeup is quite difficult to use - it is difficult to apply and difficult to wash off, so it is unlikely to be convenient for an ordinary party. In addition, in the circus and theater there is a large distance between spectators and performers, and some coloring flaws are not too noticeable, which allows for a less accurate drawing on the face. For home parties, it is still better to use special water-based makeup in the form of pencils.
Parsley as a variant of a clown outfit
Parsley or a jester differs from a clown in that instead of a cap, there will be a funny cap with a pompom or tassel on his head. Petrushka is not a circus clown, but a traveling performer - a buffoon, so the outfit can be more “democratic”. In order to make a buffoon or a wandering gymnast out of a baby, you will need to cut and sew a one-piece jumpsuit, which is fastened with buttons from top to bottom. But the main feature of this outfit is that the left half will be strictly one color, and the right half will be another, usually contrasting.
Here are some suitable options
: red and green, yellow and red, blue and red, yellow and blue, yellow and orange. The cap will be the same: usually the jester wears a “two-horned” and two-color cap. If the left half of the suit is red and the right half is green, then for the cap everything should be the other way around: green on the left and red on the right. In this case, the green “horn” is decorated with a red bell (pompom). Parsley is the closest relative of the Italian Harlequin, only Harlequin had a black and white “chess suit”, and Russian buffoons came up with their own version.
Petrushka can have any shoes
. In Rus', buffoons usually wore bast shoes. But, since Petrushka is usually also a traveling acrobat, gymnastics shoes are suitable for the child. You can attach pompoms to them, like a circus clown.
The circus is always a joy, so any kid will be happy to put on a clown outfit and go to a matinee in it to entertain the “respectable audience.” The main thing is to approach the matter with imagination, to show imagination and ingenuity. Then the image of a circus performer will turn out to be cheerful, expressive, and original. You can dress up a girl as a “clown” by putting on her the same vest, cap and wide pants. The main thing is that the baby feels comfortable in the new image and enjoys his transformation.
Attention, TODAY only!
Sequence of work
1. Sketch the toy on paper. You must calculate the clown's height. My toy is 27.5 cm tall and has a 5 cm hat. The head fits 6 times in height. The height of the legs from the hip is equal to half the height of the doll. Arms length to mid-thigh. These are the basic proportions of the toy.
2. Making the head.
We heat flesh-colored foamiran on an iron and stretch it onto the ball. Glue and cut off excess. We make hair from orange colored foamiran in the same way. Cut the ends into strips.
3. Draw a face. We outline the details of the face with a pencil. We trace the contours with a ballpoint pen and paint with acrylic. We make the nose from polymer clay. Roll a ball, try it on and bake in the oven for 15 minutes at 130 degrees. Paint the cooled ball red and glue it to the face.
4. Make a cylinder hat. Glue the top and brim to the cylinder. Decorate with a thin strip of foamiran.
5. Prepare a bottle for the body. We cut the top to the required size for the neck and glue a triangular piece of foamiran to the front part so as to completely cover the neck. We pull up the foamiran and glue it on the back. We decorate the shirt with buttons and a bow tie.
6. Making trousers. We wrap the foamiran rectangle around the waist and, after trying it on, glue the back seam to the level of the trouser legs. Cut the pant legs in half lengthwise.
Glue the seams of the trousers. We insert the wire bent into the letter P into the trousers and fill them with padding polyester. There remains a small hole between the legs; it needs to be glued with a triangle, like a gusset. Draw a pattern on the trousers with markers: checkered, striped.
7. Cutting the jacket. From a rectangle of foamiran, trying it on along the body, cutting it, we form the details of the jacket. Don't forget to raise the top to create a collar, which, when folded back, is cut like a turn-down collar. Glue at waist level. At the back, cut in the middle of the back to shape and glue.
We also make sleeves from rectangles, cutting off the top of the sleeve along an oblique line. Glue the sleeves at shoulder level.
We insert the wire, wrapping it with padding polyester. We glue the hands together from rectangles, trying them on the protruding parts of the wire with padding polyester. If necessary, bite off the excess wire and remove the excess. When you glue the foamiran for the hands, cut the fingers. The wire bends well and you can give your hands the desired position.
Decorate the jacket with a pocket and draw a design with markers.
8.Making boots. Glue the halves of the foam balls together. Heat the foamiran on an iron, stretch it over the front part, and glue it. Cut out the backdrops from rectangles and glue them on. Make a sole, glue it and decorate the joints with a strip along the bottom of the shoe. Make a stripe for the fastener. Lubricate the wire protruding from the legs with glue and insert it into the back of the shoe. If necessary, secure by gluing the pant legs to the shoes.
9. Assembling a clown. Glue the head. We put on the hat, gluing it. Let's move our hands. We come up with what we can give to the clown and complete the composition. I made a dove and a cat out of felt by folding two identical patterns and sewing them over the edge. I filled it a little with padding poly for volume. Glued the pets to the arm and shoes. I made a ring from the trimmer fishing line (you can use wire). That's it, the toy is ready!
If you have any questions, you can ask them to me, and I will definitely answer you. I wish you success in your creativity!
Funny clown figures are made from bright cotton fabric - chintz, satin, calico of various colors and patterns. The basis of souvenir toys is a foam pad.
The parts are connected using braid or strips of the same fabric, tucked inward on both sides.
A special feature of these toys is that each fabric part is secured to a base of thick (drawing) paper. The paper base is cut out without any allowance for seams. Fabric parts are cut out with a seam allowance of 0.5-0.7 cm and then connected to paper parts - tucking the edges inward, basting with bobbin threads along the edge to the base (can also be joined using glue). The basting threads are removed after connecting all the parts using braid.
Thanks to this processing of each part, a good quality product is obtained.
Clown doing handstand
Manufacturing
1. Cut out toy blanks from foam rubber: head, torso, hands.
2. From paper, cut out a head, a cap, hands, body parts - 2 parts of each, shoes. Cut the same parts from cotton fabric with extra seams. Cut a collar from white fabric.
3. Connect each piece of paper with the corresponding piece of fabric.
4. Connect the parts of the body into one, sewing them along the wrong side with oblique stitches over the edge. First you need to connect the middle lines of the upper and lower parts of the body, and then along the waist line. Sew on shoes.
5. Place the sewn parts of the body on both sides of the foam pad and sweep, piercing all three layers with a needle.
6. Connect the sides of the body using braid (corresponding to the thickness of the foam rubber).
7. Baste the parts of the head with a foam gasket. Place the cap on top and pin it with pins, aligning the edges of the workpiece and the fabric parts.
Sew the cap to the head. Connect the sides of the head piece with braid.
8. Knit hair for a clown from bright woolen threads.
First, the chain is crocheted, and then two rows are knitted with elongated loops (the chain is knitted in length equal to the lower sides of the cap, adding to the thickness of the foam rubber). The knitted strip is attached with threads to the underside of the cap.
9. Decorate the clown’s face: glue on the eyes, cheeks, mouth, attach the nose (it is cut out of fabric according to the pattern, the edges are gathered into a small gather, stuffed with cotton wool, pulled together and sewn to the face).
10. Sew the collar: machine the edges of the collar with a zigzag stitch or crochet it; Gather the collar piece along the midline, pull it together and sew it to the head piece along the neck line.
11. Attach the head to the body. Baste the parts of the arms, sew them and attach them to the body.
Patterns
standing clown
Manufacturing
1. Cut a blank from foam rubber.
2. Cut out a head, a cap, hands, shoes, and body parts from paper.
Cut out the same details from the fabric, as well as the collar, cheeks, nose and mouth.
3. Connect the paper parts with the corresponding fabric parts.
4. Connect the body parts by sewing them along the middle lines and along the waist line.
5. Sew shoes and hands, head along the neck line. Attach and sew the cap.
6. Place the sewn parts on both sides of the foam pads, attach with pins and sweep, stitching all three layers with a needle. Connect the edges of the parts using braid.
7. Knit the hair from woolen threads. Sew the collar and attach it along the neck line. Create a clown's face.
Patterns
Sitting clown
Manufacturing
1. Cut out the head, arms, hands, and legs from foam rubber.
2. Cut out a head, cap, arms, hands, legs from paper; shoes - 2 parts each, made of fabric of different colors. Cut out the same parts from the fabric, as well as the collar.
3. Combine paper parts with fabric parts.
4. Connect the legs along the midline, sew shoes on the ends and baste them with a foam pad. Connect the sides of the part.
5. Connect the hands along the middle line, trim them with braid, and attach separately sewn hands to the ends.
6. Connect the parts of the legs and arms (as shown in the picture), sewing them together with hidden stitches.
7. Place the parts of the head and cap on both sides of the foam pads, secure with pins, baste and sew using braid.
8. Knit hair from woolen threads. Sew and attach the collar. Sew the head to the body. Design the face of the toy.
Patterns
Dancing Clown
Manufacturing
1. Cut out the body and head from foam rubber.
2. Cut out a head, cap, hands, shoes, torso from paper - eight parts (two parts each).
Cut out the same parts from the fabric, as well as the collar.
3. Combine all fabric parts, except the collar, with paper parts.
4. Connect the parts of the body along the midline and along the waist line, sewing them along the wrong side with an “over the edge” seam.
5. Sew the head along the neck line. Sew the cap along the line indicated in the figure by dashes.
6. Sew on hands and shoes.
7. Place the sewn parts on both sides of the foam pads, pin them together, baste them and sew them together using braid.
8. Baste and sew the collar along the lines of the teeth, leaving the inside of the collar unstitched, through which the collar is turned right side out. Make cuts on the inside of the collar in the corners of the teeth and carefully turn out each tooth.
9. Overcast the inner seams of the collar using a buttonhole stitch on your hands or using a zigzag stitch on your machine. Iron the collar through a damp cloth and sew along the neck line.
10. Knit the hair from woolen threads. Make round bells from bright wool or floss threads and sew them to the clown’s sleeves.
To make bells, you need to cut out two circles with a diameter of about 2 cm from cardboard, cut a hole with a diameter of 1.5 cm inside them (you will get two rings). Place the rings together and wrap them evenly with thread so that the inner hole is closed. Cut the threads on the outside of the rings, push them apart and tie them in the middle with a strong thread. Remove the cardboard mugs and trim the bells with scissors.
1.Cut out the head, body and arms, all in 2 parts. Seam allowances 0.5 cm 2. Sew everything together, leaving a small distance open (marked in gray on the pattern)
3. Turn inside out and stuff. 4.We make hair from knitting threads (put it in a bun, tie it in the middle and glue it on the head). Hair can be any length. 5.Embroider eyes - you can simply use threads, or you can use buttons.
Mouth, nose - you can draw or embroider, it all depends on your skill and imagination. 6. Attach the head to the body - in order for the head to hold tightly, you need to take a stick, glue cotton wool on it (shown in the photo below), secure it in the neck (glue it), and then glue the neck to the head or sew it on. 7.Sew handles and ribbon to the back so that you can hang the doll. 8.Cut out the legs and cap, sew the legs, turn them inside out and stuff them tightly. Sew up the hat, trim the edge and you can put it on your head))) 9. Now we sew the bag suit itself. The size is absolutely unimportant, at your discretion. The length of the suit in the photo is 53 cm - from shoulder to bottom. We cut out the front (folding the fabric in half) - 1 piece, and the back - 2 pieces. Seam allowance -0.5 cm, on the back halves - where the fastener will be - 2 cm. 10.Sew the front and back halves, connect the back halves only at the bottom about 6cm, process the rest of the part - put it under so that you get just a slit. 11.Treat the neckline with bias tape, sew on a fastener - a button or Velcro. 12.Put in the sleeves and panties, then gather them at a distance of 5cm from the edge using an elastic band. 13.Sew the legs into the trousers.
14. All that remains is to decorate the suit with a frill. You need a piece of material, 15 cm wide, the longer, the more magnificent the cape will be. Fold in half, fold one edge and sew, insert elastic and gather to the desired length, sew on a button. Let's dress up our clown. The toy is ready!!!
DIY clown toy made of fabric. Master Class. Video / DIY toys, patterns, video, MK
Once upon a time, rag dolls were the main toys of children. Everything was sewn and made from natural materials with our own hands. In addition, many such crafts not only served as toys, but were also made as a kind of amulets and talismans. Today you can also make a soft fabric doll for your child. This craft, hand-sewn with love and warmth, will be an excellent alternative to cold plastic toys from the store. You can choose any image for work. For example, everyone will love a bright and beautiful clown, especially since there are plenty of easy ways to make one.