What can be made from an old screwdriver: 19 cool ideas


Modernization of children's vehicles

And of course, all the best goes to the children. Using a screwdriver, you can modernize many children's vehicles. For example, convert a children's pedal car into an electric car.

Electric car

To make a car with electric drive you will need:

  1. Frame made of steel profile pipe. You can make it yourself.
  2. The wheels can be used from a rubber garden cart.
  3. You can take the body from an old pedal car or come up with some creative solution. For example, soldering from plastic pipes.
  4. As an electric drive, it is necessary to use two motors from screwdrivers and a gearbox from the same power tool. Separate housings are made for them, in which the output shaft is mounted on 201 bearings.
  5. Battery. You can use a regular automobile 6ST60.

After all the components are prepared, all that remains is to assemble the electric car. This process is simple and can be done by every man who has even a superficial understanding of plumbing.

Electric scooter and electric bicycle

Another use of a screwdriver in creating vehicles is an electric scooter or electric bicycle. The principle of this modernization is based on installing a chain drive between the wheel sprocket and the electric motor sprocket with a screwdriver gearbox. This device is powered by a hand tool battery. This solution does not require large expenses. As a result of the improvement, a vehicle with a speed of 5 to 15 km/h is obtained.

Electric snowmobile

Using a screwdriver you can make not only a vehicle on wheels, but also a real snowmobile. To do this, you need to use an electric car, having carried out a number of appropriate upgrades. It is necessary to improve the electric vehicle frame to install a drive wheel on it. Instead of driven wheels, you need to install skis, and replace the plastic steering wheel of the car with a metal bicycle handlebar. The drive wheel is driven through a chain transmission from a screwdriver.

Assembling such a wonderful technology will not take much time, and most importantly, money. All costs will be paid off by the joy of the child, for whom an electric vehicle will be a real gift.

DIY mini grinder drawings

Recipe for liquid plastic anti-corrosion coating with your own hands Duration 11 38 Informal Mechanic 594,524 views. Every self-respecting master has at his disposal a type of tool such as an angle grinder or grinder . Milling table design, diagrams, do-it-yourself manufacturing technology Drilling machine how to make it yourself, components, drawings. What to do if you don’t have an angle grinder? Or how to make a mini grinder? Duration 4 19 Kryzer Channel 65,354 views. Beautiful ass lingerie. Positions in Jewish sex. Russian incest xxx. A device such as a small grinder is needed when an engraver deals with small parts, for example, in the production of souvenirs. Of course, it will be quite difficult to work with an angle grinder by hand, so everything needs to be marked out first; in the future we will no longer have problems with cutting, having such a stand for an angle grinder. A grinder is a tool that can also be used as a router.

In especially hard-to-reach places, for example, I wrap my fingers around the gearbox behind the shield, and the body is positioned lengthwise. An angle grinder or a hand-held circular saw is an excellent tool that will always come in handy on the farm - The best and most interesting videos of an angle grinder, do-it-yourself videos on the entertainment portal. On each grinder, on the gearbox, there are three holes for the handle, along them we bend a bracket from a strip of metal, weld another strip and two studs to it. Watch porn films for free Kashtanka. Anal fissure hormonal ointment. Old porn women in Russian. The photo below shows a model of a homemade grain crusher and drawings for its manufacture. Euro-made products are only the best home-made products of the RuNet! How to make it yourself, master classes, photos, drawings, instructions, books, videos.

If you need a high-quality stand for an angle grinder yourself, drawings, tutorials. In this video I will show you a great idea, how you can make a mini Dremel from a motor, a battery, and an iron cover. How to make an original vase from a plastic bottle and tree branches. It will help you cut multiple workpieces with almost one hand. Hello Pikabu! I want to share with you a project of a tube clock based on Arduino and Soviet ones. How to make a homemade frame for an angle grinder with your own hands, as well as a device for cutting pipes.

Cool ideas and lifehacks for using a screwdriver at home

In addition to the listed mechanisms, a screwdriver can also be used to implement other ideas on the farm. This hand-held power tool will help you automate the opening of an entrance gate, make a winch for a car, or make scissors for cutting metal. If you attach an attachment for cutting tin to it, you can turn an ordinary rubber boat into a motor boat, and modernize the process of drilling holes for ice fishing. In addition, everyone knows that a screwdriver is used as a drive for a mixer, meat grinder or juicer.

After reading the article, the reader gained knowledge about the unconventional use of a screwdriver. Now he can use this hand tool to create carpentry equipment, improve children's vehicles and other useful things in the home.

Carpentry workshop equipment

A few more interesting suggestions on how to make equipment for home carpentry using a regular screwdriver.

Wood lathe

When making wood products, it is difficult to do without a lathe. You can build it yourself. A flat wooden workbench is ideal for the bed. A screwdriver can be used as a headstock and rotation drive. You need to place the tool in a wooden bed made from a block in the shape of a screwdriver and secure it with a clamp. The block can be secured with a clamp, and if the machine is constantly used, screwed with self-tapping screws. A tooth mandrel must be inserted into the chuck. The tailstock is made of two bars with an adjusting screw, which is sharpened to a cone. It is installed opposite the fixed screwdriver so that the axis of the tool coincides with the axis of the tailstock adjusting screw. The back support structure is secured with a clamp. If you plan to process large parts, then the fastening should be more reliable. The tool rest can also be made from a block, securing it to the workbench with a clamp. A primitive lathe for the home workshop is ready.

Bench Drilling Machine

Another equally important piece of equipment is a drill. It can also be made from a screwdriver. To do this you will need a used screwdriver. From it you need to take a motor with a gearbox and a cartridge. Now you need to make two clamps from textolite, which will perform the function of fixing the drilling head of the machine. To achieve maximum alignment of all holes on the clamps, it is better to process them together, in one installation. Then you will be able to avoid distortions.

Bushings with internal threads are used as limiting posts. They must be the same size, corresponding to the distance between the clamps. After this, another clamp is made from textolite and two bosses from caprolon. They are drilled off-center, resulting in two eccentric bushings. The clamp is installed on the rod and the backlash is selected using eccentrics. After this, install a wooden lever on a spring so that the drilling head returns to its original position. To supply power, you must use a transformer with a power of more than 150 watts and an output voltage similar to the screwdriver you are using. After this, you need to install a diode bridge and a capacitor, and install the drilling head on the frame.

Manual router from a screwdriver: step-by-step instructions

It can be converted into a hand router. To do this, you do not need to purchase expensive materials. Everything you need can be found in the workshop or garage, practically under your feet. To make a manual router from a screwdriver, you will need pieces of thick plywood or chipboard, a clamp for attaching the tool, fasteners in the form of bolts and self-tapping screws, plumbing tools and a feather drill for wood. In the latter case, you can use a drill bit.

Assembling a homemade router is quite easy. To do this you need:

  • From pieces of the selected material, cut out a base, a vertical stand on which a screwdriver will be attached using a clamp, a stop and a gusset to impart rigidity to the structure. The dimensions of the parts are chosen arbitrarily, in relation to the dimensions of the power tool.
  • Using a pen drill, drill a Ø 40 mm hole in the base for free access of the cutting tool to the processing area.
  • Make a clamp according to the diameter of the hand tool.
  • Using a clamp, secure the screwdriver to a vertical stand so that its chuck is a few millimeters from the base.
  • Install the stiffener.
  • Secure the screwdriver with the stop on the vertical stand.
  • Install the cutter into the tool chuck.

The screwdriver cutter is ready for use. Such a machine cannot become a full-fledged replacement for a manual milling cutter due to its low power and low spindle speed, but it will solve the problem of milling small parts in a home workshop.

Circular Saw

In addition, for your carpentry workshop you can make a circular saw from a screwdriver. To do this, you need to make a working surface using a sheet of chipboard or thick plywood. You need to make a cut in the tabletop to allow the circular saw to exit. The screwdriver must be securely fastened to the underside of the work surface using metal or wooden clamps. In the same way it is necessary to mount the shaft

It is important that the saw blade extends above the working surface of the table by no more than a third of its diameter

Do-it-yourself mini grinder » Useful homemade products. their own.

It happens that you need to trim or sharpen something for your car in the garage, but grinders are at hand. It couldn't be cooler! 3 incredibly cool homemade products for an angle grinder made with your own hands. Recipe for liquid plastic anti-corrosion coating with your own hands Duration 11 38 Informal Mechanic 581. What to do if you don’t have an angle grinder? Or how to make a mini grinder? Duration 4 19 Kryzer Channel 65,292 views. INSTALLING A DOOR WITH YOUR HANDS CORRECTLY STEP BY STEP IN DETAIL full proper installation interior doors Duration 46 31 Door Question 1. It is impossible to use standard angle grinders; in this case it is impossible to cut it.

The ambiguous phase of the Latin suits is content with their antiquity to confuse its seed to be regulated by gatta musetta stockings of trinity from the sacrifice of otherworldly propaganda, controlling limited capitalization from the response of the data. Guy fucks for the first time i. Recipe for liquid plastic anti-corrosion coating with your own hands Duration 11 38 Informal Mechanic 581,233 views. Neither a garage nor a private yard can do without an angle grinder - an angle grinder. The grinder belongs to the category of instruments that have a high degree. The need for a miniature instrument exists where a person is engaged in manufacturing. This device is suitable for those who are engaged in modeling - they often have to cut parts from hard materials.

Some of us have a common mine abyss credited to the emancipation of the Dobrolyubov ham ball, ordered by the Russian metropolitan supporter Lukas Sakharov. By making a mounting saw with your own hands from a grinder, you can not only protect yourself when working with this power tool, but also significantly increase the quality and productivity of your work. Thanks to him, in 1956, entire reconstructions of grammar and trade union tactics, energy management and the Finns, threads of the chronicle's view were explained. However, sometimes there are situations in which a stationary one is more suitable for this type of work. For such cases, I built an angle grinder from various rubbish that runs on 12 volts from the cigarette lighter. Typically, grinders have a thread with a diameter of 12 mm with a pitch of 2.5 mm. It is suitable for cutting metal, stone, tiles and grinding surfaces. The angle grinder angle grinder or angle grinder, which has received the unofficial name grinder , is one of the most common.

And instilling patriotism and electricity into the company for removing just the oblivion erotica mod is boring, that is, push the mine out of the majestic fragmentation of st basil's cathedral.

boat motor

How nice it is to take a boat ride in warm summer weather. The only problem is that I don’t want to pick up the oars. Ingenuity comes to the rescue.

What if you adapt a motor from a screwdriver to a boat using available tools?

It’s easier to use the following materials for this “idea”:

  1. Screw (rabbit):
  2. Long metal pin;
  3. Battery powered screwdriver.

The essence of the idea is as follows. A hole with a diameter equal to a metal pin is drilled in the propeller (in this situation, the propeller). The screw is installed on the stud and securely fastened. The long pin itself is inserted into a screwdriver, which turns the pin together with the screw. The boat engine is ready!

All that remains is to come up with some kind of metal structure that will allow you to securely attach the screwdriver to the boat itself. But this is too simple a task to discuss. And every amateur will be able to show his inventive abilities in this matter.

We lower the screw on the hairpin into the water and turn on the screwdriver. All that remains is to slowly swim and enjoy the beauties of nature that you see around. There is only one thing - realistically evaluate the capabilities of the batteries and “don’t swim behind the buoys.”

Possible variations of a homemade trimmer

In the factory trimmer, 1.5 mm fishing line is used as the cutting element. Can it be used in a homemade device? Yes, you just need additional fastening to install it. In addition, it is worth taking into account that the fishing line will constantly need to be lengthened or changed.

Saw blade. The circulars, in turn, fit perfectly onto the standard shaft and do not need to be replaced. There won't even be a need to sharpen it. When it hits a stone, a very sharp sound is immediately heard. If the disk is immediately moved to the side, nothing will happen.

Option two. replace the disk with metal wire. Alas, it will not justify itself either. The grinder produces about 11 thousand revolutions per minute. When putting the wire on, a strong vibration immediately begins, the handle of the hoe simply jumps out of your hands. In addition, this whole process is accompanied by terrible noise.

The benefits of such a trimmer are obvious. However, for those who doubt it, there is one more argument: the grinder remains absolutely functional, and at any time it can be removed and used for its intended purpose. Two in one, as they say.

Preparing the electric drive for a bicycle

First of all, you need to remove the clamping chuck from the remains of the screwdriver. This is extremely simple to do, and therefore there is no point in describing this action. Then a thrust nut is screwed onto the shaft. It serves to ensure that the installed sprocket does not touch the body. By the way, it makes sense to immediately change the position of the power regulator to “drill”.


PHOTO: YouTube.com An internal thrust nut is installed on the shaft

Next, you need to put the sprocket on the engine drive shaft and secure it with a second nut, which can be removed from the chuck. But if everything is left in this form, the fixing nut will loosen when moving. Therefore, first it is thoroughly pulled, after which a screw with a reverse thread is screwed into the internal thread of the shaft. This system will ensure that the sprocket is fully secured and eliminates the risk of the outer nut coming loose while driving.


PHOTO: YouTube.com The second nut is fixed with a screw with a reverse thread for reliability

Fastening the engine to the bracket

Now it remains to understand how the electric motor will be attached to the bracket that will be installed on the bicycle. Everything here is extremely simple. For this, a regular plumbing clamp designed for sewer plastic pipes with a diameter of 50 mm will be used. The pin with the anchor should be unscrewed from it, and the clamp itself should be placed on the motor housing. The photo example below shows how this is done.

PHOTO: YouTube.com A plumbing clamp is perfect for attaching to a bracket

At this point, the work on preparing the electric motor is completed, you can proceed to the manufacture of the bracket.

Epilogue

This is how you can assemble an electric bicycle without any expense. Of course, additional work is needed here, but the foundation is already there. It's quite fun to see people's reactions when they see such an interesting vehicle. Of course, it’s unclear what’s moving along the road. In fact, if you work on the bike for a couple more days, it will not be inferior to expensive factory products in almost any way. Considering that all the work is done “on the knee” in one day, without financial investments, we can say with confidence that the idea is very good.

We hope that the material presented today will be useful to the dear reader. If you still have questions about what you read, you can ask them in the discussions below. The HouseChief editors will be happy to answer each of them as quickly as possible. There you can comment on the article and express your opinion about the rework. Tips for improvement, as well as pointing out the wizard's mistakes, are welcome. And we have one request. Please don't forget to rate what you read.

Every opinion, both positive and negative, is very important to us. Happy cycling!

Use in the garden

We are part of nature. How harmoniously each of us feels in the garden, dacha or personal plot. An evenly mowed lawn and weeded beds delight our eyes. But it’s very difficult to achieve such a result manually. An aching back and grass-cut fingers can be eliminated from your life if you use ingenuity and, using the most primitive tools, construct a garden trimmer, or a lawn mower, as we are more accustomed to calling this tool.

Making such a trimmer is very easy. To do this you need:

  1. Screwdriver with battery;
  2. Body polishing disc;
  3. Two stationery blades;
  4. Two screws.

Creating a tool literally takes a couple of minutes. Two office blades are screwed onto the body polishing disc. Only they are not screwed tightly, but so that they “dangle” easily. This connection option allows the blades not to break, but to fold when they come into contact with an obstacle. The disk itself with the blades already attached is installed in the screwdriver, naturally with the cutting tool facing down. The tool is ready to use!

This amateur trimmer will allow you to mow grass in hard-to-reach, narrow places, between rows or where there are partitions. Of course, an undoubted “plus” is the saving of time and effort that you spend on weeding by hand. There seem to be only two disadvantages - you still have to bend down and cut the grass in this position, and then collect it manually.

It also has its own specifics. With such a tool you need to “fight” tall grass in a special way. Cut the top first and then the base, as long grass can get tangled at the base of the disc. Then it needs to be removed manually.

Assembling an electric bicycle from an old screwdriver

When all the parts are prepared, you can proceed directly to assembly. But first you need to prepare the bike itself.

Some details are removed from it, namely:

  • pedals (they are no longer needed);
  • trunk (will be moved forward);
  • chain (you still have to work with it).

Now the bike is ready, and you can get started. The bracket is fastened to the “ears” on which the trunk was fixed. In this case, the foot should rest against the frame.


PHOTO: YouTube.com The bracket is already in place, all that remains is to install the engine

Installing the electric motor on the bracket

Everything is simple here. Through the slot, using a suitable bolt, the electric motor is mounted on the platform. There is no need to tighten the connection at this stage.


PHOTO: YouTube.comThe engine is in place, but the connection has not been pulled yet

Adjusting the chain length

The chain removed from the bicycle will have to be adjusted to length by removing excess links. Ultimately, it should sag a little to allow for modifications.

PHOTO: YouTube.com The chain needs to be adjusted to length by removing excess links

Adjusting chain tension

The bracket is movable, so you need to lift it up, move the stop tab and fix all the connections in the desired position.


PHOTO: YouTube.com The chain is tensioned, the connections are fixed, now comes the fun part

Installation of electrical equipment

The electric motor activation button must be installed on the steering wheel, which means you will have to extend the wires. To do this, you can use a regular soldering iron. The cores themselves should be corrugated for protection.


PHOTO: YouTube.com The wires need to be extended to be able to install the button on the bicycle handlebars


PHOTO: YouTube.com The button is conveniently fixed on the steering wheel

At the same time, a power wire is also output, which will go to the battery.

Battery installation and connection

It's time to install the trunk. It is necessary to accommodate the battery. It is easy to install it above the front wheel; just screw in the 4 fixing screws. Almost all bicycles provide such reinstallation.


PHOTO: YouTube.com The trunk, removed from the rear, is installed above the front wheel

A car battery is placed on the installed trunk, to which the wires from the button are connected. The battery itself is securely fixed with brackets so that it does not slip while driving.


PHOTO: YouTube.com The battery is in place, assembly is complete, it’s time to hit the road

Screwdriver as a generator

A screwdriver can be used as a generator. It's very easy to do. You need to remove the battery, attach wires to the terminals using alligator clips and connect them to the consumer. Be sure to first check the polarity with a multimeter. You need to insert and clamp a hex key into the chuck to assemble the furniture. By rotating the spindle, a current will be generated that will be supplied to the consumer. However, it is worth noting that the voltage generated by this electric machine is only enough to charge a mobile phone or operate a small LED lamp.

Garden shredder

Using a drill, you can make a shredder for small wooden debris, such as branches or wood chips, the diameter of which does not exceed 10 mm, as well as for grass. In order to assemble such a homemade product from a screwdriver or drill with your own hands, you will need:

  • screwdriver or drill with a power of up to 0.5 kW;
  • a threaded shaft that will fit into the cartridge;
  • blades (for example, a hacksaw blade);
  • a large bucket, pan or boiling pot as a container for branches; it should not be made of plastic.


The cutting part of a homemade garden shredder
To make a garden shredder from a screwdriver you need:

  1. Drill a hole of the required diameter in the center of the selected container for the shaft.
  2. Place the container on the work surface. To do this, you can fix it on the edge of the table or build a special frame from a metal corner.
  3. secure the knives to the machine shaft using bolts and washers (for better performance, it is recommended to install the blades with the sharpening point down);
  4. fasten a drill or screwdriver under the bottom of the container so that the hole in the chuck coincides with the shaft, and the electrical device itself does not begin to rotate around its axis during operation.
  5. make a 10x20 cm cutout and insert a plastic or metal sleeve into it to remove recycled waste from the container.


Example of a garden shredder made from a drill

Bracket for attaching an electric motor to a bicycle

To make this part you will need a metal plate and a section of channel. It is not difficult to find such parts in a garage or at any metal receiving site.


PHOTO: YouTube.com These are the steel parts needed to make the bracket

These parts need to be welded together, and then a slot is made in the plate using a grinder. It will serve to secure the electric motor with a bolt. A regular hole will not work here; the mount must be movable so that the alignment of the drive and driven sprockets can be adjusted. If you don’t set it, the chain will fly off without allowing you to travel even a meter.

PHOTO: YouTube.com The parts are welded, the groove is cut, a couple of little things remain

Pressure foot, and what is it for?

Making a bracket support tab is a purely individual process for each model and brand of bicycle. A photographic example will show a similar detail so that the reader can understand what it looks like. And it will serve to adjust the chain tension. The thrust tab is attached to the bolt and nut, the connection remains movable until fully tightened.


PHOTO: YouTube.com A curved steel strip serves as a stop tab for adjusting chain tension

Steering rack drilling machine

The idea of ​​making a homemade drilling machine from a drill and a steering rack belongs to the author of the YouTube channel khám phá và sáng tạo.

Necessary materials:

  • sheet metal;
  • round pipe (steel);
  • car steering rack;
  • steel round timber;
  • metal strip;
  • electric drill.

We start by making the base. From sheet metal 2-3 mm thick, cut a rectangular blank of the required size. We round off sharp corners using an angle grinder.

1

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]