2021 ᐈ

Materials and tools

Before starting work, you need to acquire materials and tools that will be useful in the work. Here is a sample list of them:

Welding machine (you can rent it).
A jigsaw, preferably an electric one.
Bulgarian (preferably).
Drill with a set of drills.
Stapler for furniture.
Plywood, 1-1.5 centimeters thick.
Sintepon and foam rubber (sold in fabric stores).
One roll of upholstery fabric.
Varnish (optional).
Hard sandpaper that will be used for sanding materials.
Self-tapping screws and bolts.
Screwdrivers, keys.
Swivel casters (available at some furniture stores).
Metal profile pipe 40mm.

If you have good neighbors, you can borrow some tools for a short time.

IMPORTANT! When working with cutting tools, follow safety precautions to avoid injury.

How to properly repair a chair

You already know how to make an office chair with your own hands. How to fix it if some part fails? First of all, divide the breakdowns into specific ones and those that can be fixed at home. It is better to entrust complex repairs to a professional. Sitting on a faulty chair primarily affects your health. Therefore, take repairs seriously.

Simpler parts, such as wheels, crosspieces, and armrests, usually need to be replaced or repaired.
The crosspiece breaks most often, especially if it is plastic. The main thing is to carefully pull it out of the gas lift. This is convenient to do with a hammer.
The legs often need to be replaced. To do this, remove the backrest and armrests so as not to break them during repairs. Turn the chair over, remove the mounting screws, and remove the cover. Use a hammer to knock out the gas lift and replace the crosspiece with a new one. Craftsmen recommend lubricating parts for best performance during assembly.
The piaster, the metal mechanism that regulates the height of the chair, often breaks. It is removed from the pseudo-cartridge and disconnected from the gas lift with several blows with a hammer.
Handmade furniture pleases the eye and adds productivity. It’s so nice to sit every day in a chair created exclusively for your comfort and convenience.

Useful tips

If a person decides not to purchase a computer chair, but to assemble it himself, then he will be able not only to spend time profitably, but is guaranteed to provide himself with durable furniture with an exclusive design. You should focus on the interior of your personal office not only at the stage of creating a drawing, but also when choosing upholstery fabric.

If everything is done correctly, the chair will meet all the user’s needs and will become the envy of friends and acquaintances.

Some people assemble massive computer chairs from wood. They have a large mass, but are as stable as possible. The disadvantage of such structures is not only immobility, but also the lack of adjustment elements and wheels. The metal profile gives additional freedom at the stage of creating a drawing and during the final assembly of the product.

Alternatively, you can assemble a chair-table with a special tabletop for installing a laptop. This solution is suitable for freelancers, but ineffective for gamers.

Before you make an office chair with your own hands, you need to thoroughly prepare and review several master classes. Working in an office can have a significant impact on your posture, including when using off-the-shelf furniture, so custom design is the best solution, but it also has its challenges. It is important to assemble the most comfortable, but at the same time not overly comfortable furniture. An office is a place of work, not relaxation.
You can assemble computer chairs with your own hands from old furniture, but this will significantly worsen the appearance of the product. It is better not to use used materials, especially when making furniture for a child. By choosing a previously used profile, wood and upholstery, you can significantly reduce the life of the chair.
Of course, making furniture yourself is an expensive business, but it is several times cheaper than purchasing products from a specialized store. But you can cut costs, for example, by using a lift from an old chair, as well as wheels, adjustments and fasteners. But in the end you will still get a unique thing that no one else will have.

CONCLUSION

As you can see, assembling a practical and comfortable computer chair with your own hands is not difficult. Especially when you have all the tools and necessary materials. Depending on the type of car seat purchased, the appearance and functionality of the future seat may be unlimited. After all, no one is stopping you from using a car seat from BMW or Lexus as a base, equipped with massage, heating and many adjustments.

Thank you for your time, write comments, subscribe to the content!

Repost and win a laptop!

Every month on the 1st of the month iBook.pro gives away gifts.

—>

LENOVO or HP from 40-50 TR, 8-16GB DDR4, SSD, 15.6″ screen, Windows 10

Good day, if you have installed tubes on the armrests, look here https://yadi.sk/i/8xFlx_MT2odFbA.

Thanks for the comment.

Thanks for the comment. Yuri. I had to tinker with the video, because this is the first video. And the chair turned out to be comfortable and I really liked it.

The computer chair turned out to be very comfortable, the main thing is that my back is happy. Thanks for the comment.

Thank you very much Vyacheslav I will try to live up to your expectations.

To be honest, my father told me the same thing, I don’t respond well to learning until I’m faced with a problem head-on. And everything is decided right away, you just have to want it and everything will work out. Thanks for the comment.

For a computer chair, any car seat is suitable, modify the fastenings, find a spider (a leg for the chair) and the chair is ready. Thanks for the comment.

Subscribe to articles

I share interesting information not only on the blog, but also on social networks!

YouTube Instagram Facebook VKontakte Odnoklassniki Twitter

Source

Required materials and fastenings

In addition to the tools, you need to buy the materials from which the chair will be created, these are:

Plywood. The sheet thickness should be no more than 10 mm and no more than 15 mm.
Metallic profile. Will be needed to create the base and crosspiece of an office chair. Sold at metal depots and construction stores.
Upholstery fabric.
Foam rubber and synthetic winterizer.
Paint and varnish products. It is necessary to buy if the overall idea requires it.
Sanding material.
Self-tapping screws.
Bolts.
Small hand tools (screwdrivers, wrenches, etc.).
Wheels for a chair.

You don't have to be a professional carpenter to make your own computer chair. You just need to follow the instructions and take precautions.

Making your own chair

The sequence of making a chair yourself looks like this:

It is necessary to cut out the bases for the back and seat from a sheet of plywood. Also, if this is intended by the design, you can also make a base for the armrests. The resulting elements will need to be sanded. It is always worth considering the weight and height of the future user, as well as the design idea.
Using a welding machine, you need to make the base of the chair. This can be a classic style with four legs or a more intricate model. The main thing here is the stability and reliability of the structure. The material can be metal pipes, angles, profiles or channels.
Making a chair yourself means there is no height adjustment. Therefore, it is necessary to calculate in advance the optimal dimensions, taking into account the diameter of the wheels and the thickness of the foam rubber.
As for the back of the computer chair, here you can adjust the height. Whether this function is needed or not is an individual question. The fixed version is simple to make: a metal profile in the shape of a cross or rectangle is attached to the base with bolts or it can be welded.
The design that allows you to adjust the backrest looks a little more complicated. Here it is necessary to make an adapter. The frame is made on hinges, and slats with holes are attached to the back. Bolts are installed to the seat. As a result, you should get a structure of two fixation strips.
The presence of armrests is also determined independently. They are attached to the base by welding. Their shape should resemble the letter “P”. In this case, the upper part of the armrest should be directly under the user’s limb. When taking measurements, it is important to take into account the thickness of the foam.
The next step is sanding the structure. Particular attention should be paid to welding seams.
It is necessary to clean the body from dust and dirt, prime it and apply the required number of layers of paint. After complete drying, you can install the seat and armrests. This is done using bolts or self-tapping screws.
Wheels are screwed to the legs.
A layer of dense foam rubber is glued to the back, seat and armrests. Synthetic padding is applied on top and upholstery material is applied. You can use a furniture stapler to secure the fabric. For cladding, every detail is cut out in advance. Approximately 20 mm of material is left on each side for allowances. The finished backs and seats are attached with the curved edges inward. This way the staples from the furniture stapler are hidden.

Some useful tips:

Old parts of chairs or furniture that are out of order or simply not in use will allow you to save on material. It might even save you from welding work.
Using old upholstery as a stencil will simplify the patterning process.
The presence of a working lift from an unnecessary chair will allow you to create an adjustable structure.
Before you get started, you should evaluate your options and decide whether buying a ready-made chair would be a more appropriate option.

FORMUS › Blog › DIY furniture. 2 — Scorpio chair

The idea of furniture made from spare parts is not new. I carefully looked through photographs on this topic (including those on Drive2). And so I wanted something unusual.

I decided to start with armchairs; I don’t have enough of them at home. When I was changing the golf seats, I saw that these chairs had taken root at home, and my intervention was required.

I didn’t think for a long time about which car I should get the saddles from. Of course, with Ford-Scorpio! They are large, very, very comfortable, velor. These seats were developed for Ford. Very warm memories of the sold scorpion resolved this issue.

Two front seats were found plus a sofa www.drive2.ru/cars/ford/s…i/formus/journal/1330297/ What was better was restored, the sofa was used for patches. (Of the two armchairs, I have only reanimated one so far; I decided to make the second one simpler for the dacha)

The chairs have been conceptually chosen, all that remains is to select a pedestal for them. I've been racking my brain for a long time about how best to do it. Spent money on various parts, runners, legs...

I immediately rejected the option on the office leg because This is too much of an office option. It also didn’t work out to use runners for the chairs - they were too high. There remains a backup option, the most expensive and the most elegant.

This should be discussed in more detail...

The author of this chair is designer Ron Arad. This name doesn’t mean anything to us, but in certain circles in Europe he is a very well-known person. Tel Aviv Limita, who came to conquer Foggy Albion and successfully did it. Man of genius! His way of working is unconventional.

The chair in question was his first work. It was made from scrap materials - an old Rover seat and scaffolding. Such a simple solution created a sensation, people found out about it and started talking about it.

In the future, we had many original solutions for furniture, but we will limit ourselves to only this chair)

I liked the photo from the Internet so much that I started looking for solutions. They refused to bend structures to order in Minsk. But I accidentally came across ready-made chrome products! It turned out that you can buy everything you need.

Source

How to take measurements and how much fabric to buy?

We have already figured out the correct type and quality of fabric. The amount of fabric can be measured in several ways.

Take measurements from the back and seat. If you plan to add additional foam, you should take this point into account when taking measurements. To the data obtained (length and width of the back and chair) you need to add 5 cm.
The fabric will be attached from the inside, this requires allowances.
This can be difficult since the upholstery is tightly stapled to the frame pieces.
Then you should measure the finished darts, adding allowances for using foam rubber.

Helpful Tips:

It is much easier to make a chair from the parts that you have lying around from old and broken pieces of furniture. Such enterprise and thriftiness will save you from working with a welding machine.
And if you also take the upholstery as a stencil, then patterning the covering will be significantly simplified.
And finally, with a whole lift you can recreate a chair that will be able to be adjusted.

What do you need to have to make a comfortable computer chair?

If, after updating the seats, there are unnecessary seats left in the car interior, then they can be safely put to use. You can make a sofa from them, use them to create comfortable armchairs, or just make chairs. There are countless options for using chairs, the main thing is to really find the most suitable idea that can be implemented without extra effort.

If we talk about converting an ordinary salon chair from a car into a computer chair, then most examples of this process involve the use of welding and working with metal. Not everyone has a welding diploma, and the welding machine is complicated and dangerous to use.

To convert a “chair to a chair” you will need:

As you can see, a small number of raw materials are required, which will really help create a durable structure, the service life of which will be quite impressive.

In fact, you can come up with dozens of different ways to attach a chair to a moving platform. You can even take an old pedal children's car and attach a chair from a car interior to it, or you can attach a chair to a wheelchair.

But the best and simplest option may be to use a plastic stroller, which can easily be used as a reliable base for a chair. In this case, ordinary screws and a few metal corners can easily connect the stroller and chair together.

How to prepare for the process?

Before you grab a saw and hammer, think a few more times: do you need such furniture at all? If you have even a hint of doubt, you can convince yourself by appreciating the undeniable advantages of such a chair:

“Handmade” will allow you to create an original design that will fit exactly into your interior.

You will independently select the necessary sizes that will suit your height and weight.

The quality of the assembly materials and the work itself will depend only on you.

Sounds great, doesn't it? Let's drive doubts away and start making a chair for the computer with your own hands right now.

Sofa from a car: retro style

In order to make a sofa from a car you will have to work a little. All work is carried out in several stages.

Another idea: a creative flowerbed made from a car.

The first step is to prepare the tools necessary for the job. First you need to prepare the front of the car and its rear seat. It should be noted that the sofa will have a beautiful appearance only if the necessary parts of the car are in good condition. Also for work you will need an angle grinder, an auto mechanic's kit, car paints and a spray bottle.

Then you need to prepare the front of the car for installing the seat. To do this, you need to remove some elements from it, make the structure more stable, sand it and paint it. After all the necessary work has been carried out, the bumper and headlights must be put back. If necessary, you can update the seat a little. All that remains is to install the seat in the front of the car and the sofa is ready. The resulting sofa looks very unusual. In addition, the sofa from the car is quite light.

Wood as the main material

Making a wooden chair can be quite easy if you choose the appropriate method. You can use an old armchair or stool if it is not possible to purchase individual parts. Even from a banquette you can make a small chair that any child will like. To create a classic chair, boards, bars, and logs are usually used. A solid wood product has a number of advantages over other pieces of furniture, because wood is an environmentally friendly material that is absolutely harmless to health.

Natural wood is not a cheap material, but it is the key to the quality of a homemade chair. Once you are confident that the wood is of high quality, you can begin creating a work of art. There should be no knots or cracks on solid wood or bars. All parts must be carefully polished, and only then proceed to assembly. A special coating will protect the material from insect attack and drying out.

To make a chair, it is better to use oak, birch, ash or alder, because they have a unique beauty. These materials allow the product to serve for a long time without squeaking or cracking. The beauty of the product can be emphasized by high-quality textiles that will be used for its upholstery.

Wood is very durable and can compete even with metal. It does not lend itself to plastic deformation and withstands shocks and loads well. It is easy to work with, and therefore you can make a chair from wood yourself. The disadvantages of this material include intolerance to moisture and high temperatures. When exposed to water, wood swells and crumbles, so you need to first coat it with varnish.

DIY country chair from an old car seat

In order to purchase high-quality country furniture, you actually need quite a lot of finances. Moreover, if you want something really interesting, for example, a chair with high-quality upholstery (perhaps even leather) and options for adjusting the tilt and other positions. This type of request evokes associations with exorbitant spending and searching through expensive options.

However, the answer is literally on the surface; it is obvious, simple and profitable. We are talking about a car seat that only needs a little addition and modification. After this, you will have high-quality country furniture at your disposal.

The reupholstering process: step-by-step instructions

The process itself is not complicated, it is easy to cope with alone.

The first step is to disassemble the chair. To remove the backrest, you need to turn the screw at the back (with a large head); you can remove the back panel by opening the latches (by carefully pulling each corner).
To disassemble the seat yourself, you need to turn the chair upside down. Unscrew the screws and detach the armrests.
It is better to put all the screws in one place, so that by the end of the chair repair you simply do not lose them. Now you can start re-upholstering.
The old upholstery must be separated by removing the staples.
Staples that need to be removed.
Next, you need to apply foam rubber and cut it along the contour of the chair, then nail it with staples.
We cut out the foam for the seat of the chair.
Handle the stapler carefully; this tool is quite powerful.
Stretch the new upholstery, securing it to the back of the seat base and backrest.
The outlines of the chairs are rounded, and this should be taken into account when reupholstering an office chair so that there are no folds in the fabric. Excess “tails” must be cut off.

Of course, making furniture yourself is an expensive business, but it is several times cheaper than purchasing products from a specialized store. But you can cut costs, for example, by using a lift from an old chair, as well as wheels, adjustments and fasteners. But in the end you will still get a unique thing that no one else will have.