Master classes on making glasses cases with your own hands

Types of products

Before purchasing, it is better to familiarize yourself with the types of products in order to buy not only a stylish, but also an easy-to-store accessory that can protect your glasses from various defects. The covers are:

1. Tough. They are made using gold or silver, wood or aluminum, metal or plastic. To prevent the inside of the eyeglass case from looking rough and damaging the contents, it is lined with soft material. This option is ideal for forgetful, energetic people who often hit the road, because it will withstand falls, crushes in transport and other unpleasant situations.
2. Soft. They are made from natural or artificial leather, various textiles or microfiber. Such cases are compact, do not take up much space in a bag or briefcase, and are suitable for storing sunglasses.
3. Foldable. Such cases are the most compact and, therefore, convenient. They are usually made of thick belt leather, which makes them durable products that do not lose their original appearance even after several years.

Eyeglass cases are also divided into men's, women's, and children's. They all differ in color, size, design. Products for women are lighter in weight and have soft, smooth lines, while men's models often have a more angular, rectangular shape. Nowadays, most eyeglass cases are produced in a unisex style with standard sizes depending on the material - on average from 16 x 6 cm to 18 x 8 cm.

Interestingly, there are no fewer children's models than adults. Their main differences are: compactness (they measure approximately 15 x 7 cm) and bright, rich colors. They can also be of various shapes, for example, in the form of a car, a rocket, or even a doll.

Hard

Soft

Folding

Female

Children's

Male

Unisex

Possible materials of manufacture

The materials from which eyeglass cases are made vary in strength, durability, and degree of protection. Leather is often used - products made from it look stylish, but are expensive. Cases made of this material can protect the contents from moisture, dust or scratches. If there is a strong impact or crushing, a leather case for glasses, whether made by hand or produced in a factory, will be damaged. The exception is if a metal or any other rigid frame covered with the described material is used. In this case, protection for the optical device is provided. The disadvantage of such products is the high price, it can vary between 900-5000 rubles.

Wooden cases are exclusive options. Craftsmen make their own cases for glasses from expensive, rare species (bamboo, cherry or walnut). Such products are impregnated with protective agents and varnish. Most often, they are not suitable for large frames, as they are made compact (16 x 6 cm), while the currently popular glasses require at least 10 centimeters in width.

Metal is a popular material for products, but can damage the glass due to friction against the hard walls of the case. For this reason, such cases are made to specific sizes; sometimes they come directly with glasses. Metal products are often purchased by athletes who are used to spending time actively, or by motorists, because such covers are not afraid of falls. Metal accessories are inexpensive (within 1000 rubles), but they are large in size compared to other models.

Fabric is another popular material. The easiest way to make such a case for glasses with your own hands. A fabric product is perhaps the cheapest (costs about 500 rubles), durable option.

Which accessory to choose depends only on the person’s activity and personal preferences. If you want to make your image individual, then a wooden eyeglass case would be the best option, but such a product is more suitable for men.

Leather

Tree

Metal

Textile

The process of assembling a reliable glasses case

Creating a case for glasses can be divided into two stages:

• The first stage will concern the creation of the case itself with filler.
• The second stage concerns the design of the case, which will take much less time.

You need to start with the fact that from a 250 ml bottle of water you will need to remove all the stickers - they can interfere with the design of the case in the future.

Then you will need to cut off the bottom of the bottle with scissors - this will be the cap. It will then have to be covered with a colorful cloth, just like the entire bottle.

Next, you will have to process the foam, which will be the filler for the case. Thanks to the foam insert, the glasses will always be protected and no shock will damage the glasses.

The foam is cut using scissors; you can also use a sharp knife. The main thing is to cut out a cylindrical shape from foam and then make a hole in it using scissors.

After making a hole in the cut out piece of foam, you can insert it into the inside of the case.

You will also need to cut a piece of polystyrene foam to the required size for the lid, gluing it to the bottom of the bottle with glue.

When gluing the foam filler to the cap, it is worth remembering that its dimensions should be slightly larger than the width of the bottle. In this case, the cap will fit tightly into the bottle and the case can be tightly sealed.

As soon as all the work on creating a case from a bottle and foam plastic is completed, you should take care of the design of the case.

To do this, you will have to use any colorful fabric, you can even choose silk, the main thing is that the fabric is pleasant to the touch and has an attractive appearance.

Next, you need to glue the cut piece of fabric to the bottle case

This should be done carefully so that the fabric sticks well and without folds. The result should be a colorful and functional case for glasses, which is extremely simple to make, and for this you will have to spend mere pennies.

The result should be a colorful and functional case for glasses, which is extremely simple to make, and for this you will have to spend mere pennies.

DIY glasses case #SvGasporovich

Don’t be afraid to do something useful and valuable with your own hands, because in this case you can significantly benefit yourself from serious cost savings and get a little thing that you can’t buy anywhere else.

Making a case from a plastic bottle is extremely simple, especially since foam is a very plastic material that will protect your glasses from damage if you insert it inside the bottle.

You can not use polystyrene foam, but stick on several layers of fabric to protect the glasses from damage - this can significantly save time in the end when creating a creative case for glasses.

Types of fasteners

When making your own glasses case, its clasp plays an important role. It must open only when the owner wants it and close well. There are the following types of fasteners:

1. Button. This is not a particularly convenient option, as it closes by pressing, which can damage the glasses. Over time, it may weaken or become oxidized and require replacement.
2. Magnet. The fastest working type of fastener, simulating slamming. Its only drawback is the loud sound when closing.
3. Frame clasp. It is a classic, comfortable and beautiful, which will last a long time and keep the contents of the case intact. It consists of 2 frames connected by hinges.
4. Snake. The optimal choice for children's cases and sunglasses storage.
5. Velcro. This is a fairly rare way to close eyeglass cases at the moment. More often found on cheap options, since this is not the most durable and rather weak fastener.
6. The cord, like the snake, is suitable for sunglasses and is also a budget option.

Soft large or sliding eyeglass cases (reminiscent of a pencil case) may not have locks at all.

Which clasp to choose to sew a glasses case with your own hands depends on who will use it and how. The easiest way is to sew lace or Velcro to the case. If you need a strong and durable fastener, it is better to use a magnet or a snake, especially since they look much more beautiful. It is also worth starting from the material of manufacture, because a fabric eyeglass case will look beautiful with a simple cord, but leather ones would be better decorated with a button or a magnet.

Button

Frame clasp

Snake

Velcro

Lace

Magnet

DIY felt phone case | Koteko

It’s easy to sew a felt phone case with your own hands. There are all kinds of cases on sale, but it’s not always possible to choose something original to suit your taste. If you were unable to buy felt for the case, don’t despair. The cover can be sewn from a piece of leather, leatherette or thick woolen fabric. The decoration will be in the shape of a cat.

Case with cat applique

To work you will need:

1. Felt.
2. Beads and glass beads.
3. Floss threads.
4. A piece of braid.
5. Scissors.
6. Glue Moment.

The pattern is simple: place the phone on paper and trace the outline with a pencil. Don't forget that the phone has its own volume, so be sure to leave an allowance. The thinner the phone, the smaller the allowance. There is no need to make the case narrow; it will be inconvenient for you to take your mobile device out of it.

We place our resulting paper pattern on felt or leather.

Cut out 2 parts along the lines.

Draw the silhouette of a cat on paper. This will be a pattern.

We lay the pattern on light felt, trace it with a pencil and cut it out.

Cut out pink ears and a brown muzzle from leftover felt or leather.

We attach the muzzle detail to the head detail and embroider the nose with black thread.

Using the same threads we embroider the cat’s eyes.

• We embroider the mouth with pink threads.
• We sew on the pink ears using small hand stitches.

From blue fabric we cut out an oval slightly larger than the silhouette of a cat. Glue the applique with Moment glue.

We take a narrow braid. We burn the edges so they don’t crumble.

1. Let's make a bow.

Sew a bow to the cat's neck. We attach beads on top.

Cut out an oval from lilac felt. It will be larger than the blue oval.

• We sew the cover with bright threads.
• Glue the resulting applique onto the main fabric of the cover.
• We put both parts of the cover together.

We sew the product with a neat loop seam. Threads match the cover.

DIY glasses case. Free running stitch.

That's all. The original case is ready. Everything made by hand is always interesting and unique.

DIY phone case made of felt

Everyone wants their phone to be bright and impressive. This handmade accessory will lift your spirits and become an indispensable decoration for your phone. It is worth noting that phone cases made of materials such as felt have become very popular. This material can be purchased at a store that sells thread, braid, zippers and other items for needlework.

Types of covers sewn in the same way

Think about what you can decorate the case with. It could be an interesting button, a beautiful flower, a funny cat or cat. You can use your imagination and make the item unique. The product can be with a sewn flap, Velcro or button.

How to decide on the size

Glasses from popular brands are often sold complete with an eyeglass case, and there is no need to select one. Such options cost at least 5,000 rubles. If a case is not provided or you make cases for glasses yourself, it is important to know that the contents in them should not dangle or, conversely, interfere with closure. Otherwise, the following problems may occur:

1. Inside a case that is too large, the glasses dangle - this is not critical, but the glass may be damaged.
2. The small case is difficult to close, causing the product or its contents to break or become deformed.

When the accessory fits perfectly, the glasses are fixed in it and do not interfere with closure. If the case is too large, sometimes some soft things are placed inside, for example, microfiber cloths. This is a way out when changing glasses and not wanting to change an existing, well-proven accessory.

DIY cardboard case for glasses

The case can even be made from cardboard. The work will require cardboard, whatman paper, cotton fabric, PVA glue, tape, pencils, ruler, thread, needle, and other office supplies.

At first glance, the case may seem like a trifle that is not worthy of attention, but a girl who follows fashion should pay attention to absolutely all the details, because a stylish image that follows the latest trends is made up of details. It’s great if the case matches the style of a bag or belt, then the set will be complete and harmonious

DIY glasses case #SvGasporovich

Master classes taking into account the material

Currently, they produce a lot of eyeglass cases, but even with such variety, you want something special. Moreover, a case made by yourself can be an excellent gift. Beginners should try starting with simpler models made of leather, felt or knitted yarn.

From felt

This master class will answer the question of how to make a case for glasses from felt with your own hands. This is the simplest option that is available even to children. To make an eyeglass case you will need:

• sheet of hard felt;
• threads;
• needle;
• scissors.

You should stick to the plan:

1. You need to measure the glasses when folded.
2. Cut twice as much felt.
3. Sew along the edge with an overcast stitch, tucking the end of the thread inside.

If desired, you can make a trim from the same felt, then you will need to sew the product together after composing the composition. If you don’t have time, it will be easier to glue decorative elements to the surface. Felt is easy to cut and does not fray, so small parts and a cover can be made without any problems.

Prepare material of the required size

Fold in half and stitch

Ready-made glasses case

Leather

You can make a leather glasses case with your own hands based on this master class. For production you will need:

• textile;
• glue;
• a piece of leather, preferably on thin foam rubber;
• needle;
• thread.

The following steps must be followed:

1. First you will need a pattern for a leather eyeglass case. With our own hands we cut out a rectangle to the size of the product. You can focus on the standard parameters - 18 x 15 cm.
2. Fold it in height with the front part facing inward and sew the two sides (long ones).
3. We cut the foam rubber and glue the allowances.
4. We assemble it in half and sew it in the middle with a longitudinal seam.
5. We cut off the foam, turn the allowances to the front side and glue them.
6. Cut a strip of fabric measuring 8 x 30 cm.
7. Fold it in half with the right sides facing in and sew the two sides together.
8. We put it on the leather base of the case.
9. We turn the entire product inside out. If desired, you can trim the top with a strip of leather of a different color.

Measure out the required piece of leather

Outline the shape of the cover, cut and make holes

Sew the case with thick threads

Finished leather case

Crocheted from jersey yarn

This master class will help you knit original eyeglass cases with your own hands. For this you will need:

• approximately 100 g of yarn;
• zip fastener;
• hook number 3.

To knit the case, you need to follow the following procedure:

1. Crochet number 3 in two threads. Cast on a chain of 10 chain stitches.
2. Continue knitting in the round with single crochets.
3. Not reaching about 2 cm from the top, cast on 22 chain stitches, continue working in a circle, skipping 22 stitches.
4. After 2 cm, begin to decrease loops from the sides (from the first row - 4, from the second - 3).

Once the base is ready, sew on the zipper. The main thing in this case is to stick to the pattern to avoid missing loops. Those who wish can crochet a border for the product.

Knit a series of chain stitches

Starting knitting with single crochets

Knit the required number of rows

Make loops for the tie

Thread a string

Ready case

Rigid cardboard and fabric

A master class on the topic “Sewing a case for glasses from fabric and cardboard” will tell you how to make a case with your own hands. The following materials and tools will be required:

• cardboard 2 mm thick;
• Whatman paper;
• cotton;
• glue;
• scotch;
• magnet.

First you need to cut out parts of the eyeglass case from cardboard: rectangles measuring 16.6 x 7.6 cm, 17 x 8 cm and 16.6 x 6 cm, 2 triangles 6 x 7 cm, 8 x 7.8 cm. Whatman paper is needed for each of sides, and the length of 1 and 3 of the above parts should be increased by 4 mm. The edges of the first rectangle must be beveled. Then you need:

1. Assemble the case by securing the corners with masking tape and gluing sheets of whatman paper to the base.
2. Cut the fabric so that there is enough for the entire perimeter of the product. Glue it to the outside of the case.
3. Make a slot for the magnet on the inside and carefully secure it.
4. Sew on the spine and glue on the lock. Insert the other part of the magnet from the outside.

Such a case can be made not only practical, but also completely consistent with the style of the owner. Suitable for adults and children. All that remains is to choose the materials and get to work.

Blanks for a cardboard case

Glue the parts

Additionally strengthen from the inside and mark a place for the button

Insert button

Ready-made cardboard and fabric cover

How to make a case (case) for glasses from leather?

In fact, sewing is not so difficult, and even sewing cases (cases) for glasses from such a rough material as leather. If you properly arrange your workplace and have such tools at hand, a light female hand can create a couple of unusual and very elegant cases for your favorite glasses.

What materials are needed?

The most important material for such products is leather. But the use of leatherette cannot be ruled out. It’s worth taking a closer look at such pleasant little things as accessories for handbags; here you’ll also need them.

Eyeglass case "owl"

Oh, these fashion trends. Everyone wants to get unique leather models made by themselves. And this is great, because this product simply cannot be more unique. Beautiful work and also very useful. There is no danger to your glasses with them.

For work use:

• brown skin;
• chalk;
• scissors;
• needles and threads;
• soldering iron;
• hole punch or awl;
• brown zipper (short);
• acrylic paints (small sponge).

Pattern

Draw a rectangle on the skin according to the size of the glasses. Separately cut out the part for the bird's head.

Preparation

Cut out a rectangle and draw a thin line at a distance of 0.5 cm, marking dots on it every 0.5 cm. Then make holes using a hole punch or a special tool.

Lightning connection. Sew a zipper between the sides, and bend the corners slightly to create a convex shape for the bag. Sew the product a second time.

Burning

In order to get the body of an owl, you must first make a drawing, then heat the awl and carefully draw a line. You can use a special thin soldering iron.

Use a soldering iron to process the edges of the bird's head piece so that the skin is slightly rounded. After firing, apply acrylic paints with a sponge in a slight gradient. So the beautiful bird is ready.

Glasses case with geometric motifs

A simple model with an unusual design approach. Very light colors for the product and cutting out geometric shapes on the canvas are also welcome.

For work use:

• light skin;
• hole puncher;
• threads and needles;
• scissors.

Pattern

Make a neat pattern according to your measurements.

Processing the edge of the product

To process the edge of the product, you will need to draw a line 0.2-0.3 cm from the edge of the pattern. Next, place points at a distance of 0.5 cm from each other exactly along the line. Then a hole puncher gets to work, making even holes for the thread in front of the seam.

Seams

Connect the piece to make a pocket and you can sew it on. This will not be difficult to do, especially after processing with a hole punch or awl. To work, you can use a simple “forward needle” seam, then sew it again so that all the intervals between the holes are filled. This way the seam will turn out to be almost factory-made, and the work will be securely fastened.

Clasp

All that remains is to install the fastener. The edges of the leather can be trimmed with a lighter. For fastening, use a long strip, which is connected to the back wall of the eyeglass case.

Decoration

In order to somehow decorate this model, you can use special clippings. This is cutting out geometric figures along the front wall. First draw them with chalk. But do not cut the line all the way, so that the figures do not fall out and form holes in the canvas.

Eyeglass case with zipper and applique

Cases with various patterns, ornaments or appliqués look creative.

For work use:

• brown skin;
• chalk;
• scissors;
• needles and threads;
• hole punch or awl;
• brown lightning (short);
• applique of multi-colored rhinestones (or iron-on sticker) in the shape of an owl.

Pattern

Draw a circle on the skin with a diameter of glasses length +5 cm.

Preparation

Cut out a circle and draw a thin line at a distance of 0.5 cm, marking dots on it every 0.5 cm. Then make holes using a hole punch.

Lightning connection. Sew a zipper between the sides and bend the corners slightly to create a convex shape for the bag. Sew the product a second time.

Decoration

Decorate your work with an owl: with a thermal sticker or glue an applique of rhinestones. If you wish, you can buy rhinestones separately and assemble your own unusual picture of an owl.

These three models of glasses cases will definitely decorate your glasses and will be reliable protectors for them. The master spent approximately 1 hour on each model. It’s not that difficult to sew such beautiful things, so why not treat yourself to another fashion accessory that’s definitely unique.

Decor options

The beautiful, fashionable design will be a great addition to your homemade glasses case. You can decorate it with embroidery, stones, beads, and rhinestones. Nowadays, colorful drawings are in fashion, so there is room for imagination.

Felt appliqués, which can be made in any color, are also an ideal finishing option. On leather products, you can make a design with acrylic paints or glue a feather, having previously decorated it. Decoupage is in fashion - a technique for decorating various objects. It must be remembered that the case is a miniature thing, therefore, the decorations should not be bulky and pretentious. Various diamonds, flowers, stars, and any geometric abstractions are perfect for decoration.