How to make a large Kinder Surprise with your own hands, a giant egg at home


Paper craft

Any child will be happy to receive a huge toy.
Children especially like the unexpected surprises inside the egg. Parents can make a kinder surprise with their own hands from paper. Many people became familiar with the papier-mâché technique at school; everyone can make this product. Materials for the product:

  1. Air balloon.
  2. White paper sheets.
  3. PVA glue.
  4. The water is cold and hot.
  5. Starch.
  6. Gouache with brushes.
  7. Sandpaper.
  8. Knife.
  9. A pair of gloves.
  10. Stickers with the Kinder Surprise logo.

Kinder egg rattles

Toy containers can serve both parents and newborn babies well: the child will have a lot of fun playing with a homemade rattle, and parents will be able to save on the purchase.

You will need:

  • plastic containers,
  • beads, cereals, small stones,
  • knitting threads, hook,
  • ribbon or strong thread.

Step-by-step master class:

  1. We make two holes on both sides of the containers.
  2. We string them with a needle onto a strong thread or ribbon.
  3. We fill them with beads, cereals and stones - each container has a different filling.
  4. We tie it up.

A rattle made by yourself looks no worse than a store-bought one. Especially if you alternate containers with beads of different colors and sizes.

Kinder eggs make a good maracas rattle: the container is put on a stick, filled with cereal and tied.

During the season of viral diseases, you can protect your child by filling a homemade rattle with garlic cloves. For an older child, you can make a garlic amulet around the neck, decorating the container in an original way.

Master class step by step

We make a kinder surprise out of a balloon, inflate it, tie it with a reliable rope, and place it in a container convenient for it. We cut white paper into small pieces.

Next, make glue, pour 1 tbsp. l. potato starch 2 tbsp. l. cold water, mix until smooth, pour in 100g. hot water. Then put the prepared solution on the stove, cook, stirring until thickened, and let the glue cool.

The next step is making the shell, for which you need to cover the ball with paper. We take the prepared balloon, inflated with air, and begin to quickly and evenly cover it with paper pieces. The glued ball needs to dry for 10 minutes. When the first layer is ready, we also begin to make the 2nd layer.

Important! When moving to the 3rd layer, intensively saturate the 2nd layer on top with glue, apply the next paper layer. The model of the toy should be well soaked. Let the product dry for 6-8 hours.

After drying the workpiece, you need to remove the inflated ball from it, you can make a puncture or untie the thread to deflate it. The resulting hole is sealed with paper.

Next, the papier mache kinder needs to be painted. This can be done with any paint you wish. Coloring can be done based on the usual design, or you can come up with your own version. The company inscription is applied using the same paints.

You can make it personal, in addition to the logo, put the child’s name on it. If you wish, you can search for egg templates on the Internet and print them. Black and white printing, if there is no “color” printer, can also be colored with paints.

The top shell is ready, you need to insert gifts for the baby into it. Depending on your imagination and imagination, we cut a door on the back of the craft. Its configuration can be: oval, square, triangular, etc.

You can also carefully trim the top and use it as a door. We place the prepared items in the mold, decorate the door, and secure it with ribbons. You can rejoice that your own paper kinder is ready.

Any ideas for decoration?

There are many unusual design options for such crafts. Let's look at the most popular and unusual ones, the level of complexity of which is low enough that even children can create them.

Keychain Minion

Surely many children are familiar with these funny yellow characters from the cartoon Despicable Me. But what about children, many adults like this cartoon! The Kinder box itself already repeats the shape of the minion; all that remains is to finish drawing his face and clothes.

To do this, you can choose a picture or photo from the Internet and simply use nail polish or felt-tip pens to add originality to the fake.

On the plus side, it should be noted that production does not take much time, and the idea is very creative, original and interesting, which your child can even do on his own.

Animals

You can decorate the blank in the form of your favorite animal, bird, hamster or fish. Any option is up to you, since, in fact, additional material in the form of paint or markers is ideal for decorating the container.

Based on this format, you can then make a keychain for your neck using thread, or you can come up with a fastening in the form of a carabiner or ring, which can be conveniently carried on your pocket or backpack to school.

For better fixation, use a clamp from the inside of the container. This way the thread or chain will not break and the toy will not get lost.

Kinder container necklace

An original master class can be done for girls. For this we will need several kinder boxes and threads that can be used for a necklace.

You can also additionally use small twists and clips to secure the necklace on your neck so as not to tie it in a “dead knot.”

The manufacturing process is very simple. First, we make two holes on the containers using a heated or cold awl. Next we take the thread and make one knot.

We pass a thread through the holes, as you would string a bead, and then, when the container rests on the knot, we secure its position (if desired) with an additional knot. We carry out exactly the same manipulation with the remaining containers.

As a result, such a product can be used not only as a decoration, but also for storing “secrets” that children love to arrange. For example, this is how girlfriends can exchange wishes.

Fake “surprise flower”

A slightly more complex fake for those who want to please their mothers or sisters with an unusual gift. For this we need colored paper, foil, markers, felt-tip pens, one container, glue or tape.

The manufacturing process is simple. First, you need your hand placed on colored paper to play the role of a “stencil”. We cut this hand out. 4-5 of these stencils are enough, which in our case will become the petals of our flower blank.

Next we take the container and glue the petals one by one. You can use glue or tape for this. For support, you can use a paper tube onto which the container is placed.

The box itself can be painted, a ladybug can be drawn there, or wishes can be written on petals made from palms.

Kinder earrings

Quite an interesting and retro-original fake for those who want to stand out at a party or school disco. Kinder has always been associated with childhood, carefreeness and games. Yellow box earrings can be a vivid reminder of this time.

For the preparation, you can use an old Kinder egg wrapper with chocolate wrapped in it, or you can simply use a yellow box as a decoration. Additionally, you need wire or ready-made blanks for earrings. A couple of punctures and wow, the fake is ready.

All that remains is to try it on and go for a walk in a stylish accessory!

Solyanka-pepper from kinder

Just look at the usual yellow blank from a different angle, and now we have an interesting idea about how we can use it in decorating the kitchen.

Just make three small holes on one container, and two on the other. This is necessary for a conditional distinction between salt and pepper in case you do not plan to visually paint or decorate the workpiece.

For example, you can make a cow and a pig, or paint them in an original way in the form of fruits and vegetables. All for your decorating interest!

If you are using non-permanent markers or simple paints, it is best to seal the fake with varnish. This way the product will retain its color and appearance longer.

Kinders from egg trays

Instead of plaster, you can use paper mache from egg trays to make this toy. To prepare the composition, you need:

  • crush the egg trays with your hands;
  • put in a fabric bag and tie it with a string;
  • place the bag in the washing machine for a full cycle at 900C;
  • after “washing”, take the mass out of the bag and crush it with your hands;
  • Mix the crushed composition with PVA glue in a 1:1 ratio; it should stick together easily.

Instead of plaster, apply papier-mâché to the paper blank with a spatula and let the composition dry. The surface is hard, you can paint it, apply a logo, or stick on a ready-made template printed from the Internet.

Mega chocolate gift

Methods for making a large kinder surprise egg with your own hands are presented above. Let's look at how to make a similar specimen from chocolate. For this you will need:

  • Dark chocolate – 12 pcs., white chocolate – 6 pcs.
  • Balloon.
  • Cake syringe.
  • A pair of silicone gloves.

Manufacturing sequence:

The ball should be rinsed under running water and dried well with a hairdryer at low temperature so that the inside is dry.

We prepare the heating in a water bath, pour 1:3 water into a container and place it on the stove.

Grind the black chocolate bars into pieces and place them in a large container.

Place the cup with chocolate pieces in a water bath. The stirring process continues until the mixture is homogeneous without lumps.

Cool the mixture so that its temperature is not too high, so that the chocolate does not cool down and has a stretchy structure.

Unscrew the cap of the pastry shop and place a ball on the spout. Using a piston, we pump air into the balloon to the required amount, and twist the tail so that it does not deflate.

Pour the chocolate composition into the syringe with a spoon and spin the ball.

When all the contents are completely filled, fix the tail of the balloon and slowly twist it, tapping it, all sides of the balloon should be brown.

We place the workpiece in a vertical position so that all the remaining uncooled sweetness drips onto the base, and the craft becomes stable.

Place the product in the refrigerator for 2 hours so that the chocolate walls harden well.

After the specified time has passed, we put on gloves so that the ball does not melt when touched, and take it out of the cold.

We make an additional coating of light chocolate inside the product. We put a deep container on the cocoon, carefully cut off the top along the edge of the container with a sharp knife.

Remove the rubber ball.

We coat the inside of the surprise with melted white sweetness and place it in the refrigerator.

We take it out after an hour and put the prepared gifts in it.

We run a hot knife along the edge of the top, the chocolate edges melt, we apply the evenly cut top, and the two components of one whole are firmly connected to each other.

To make the seam look invisible, you can add a little chocolate into it with a syringe and carefully remove the remainder.

A large do-it-yourself chocolate kinder is ready!

We make beautiful packaging

To make it look like a branded item, you need to make the original packaging. We cut out 2 oval parts from a sheet of foil with an allowance of 10 cm. Along the bottom of the blanks we draw a wave of red paint using a spray can.

We paint the remaining parts of the ovals with white, covering the red side of the workpiece so as not to stain it. Place the product sideways in the center on 1 sheet of foil, cover with another sheet, carefully sealing the edges.

We print out the original sticker from the computer and attach it with adhesive tape.

Large kinder surprise made of plaster

This egg has a special advantage - it is very durable. After unpacking the gift, the child will be able to use it as a box or house for toys.

To prepare this kinder surprise you will need:

  • dry gypsum mixture;
  • water;
  • paper;
  • glue;
  • spatula or spoon;
  • small handsaw or long paper cutter;
  • balloon;
  • 4 craft magnets;
  • gloves;
  • sandpaper,
  • gouache or acrylic paints, inscriptions and pictures for decoration.

The balloon must be inflated to a suitable size and tied with strong thread. Tear the paper into small pieces, soak it in glue and cover the ball in 2-3 layers. After each layer, you need to wait until the glue is completely dry, and only then apply the next one. When the top layer is dry, use a knife to cut a small hole, pierce the ball and pull out the pieces. Cover the hole with paper to prevent the plaster mixture from getting inside.

We recommend reading: What you can make from beer cans with your own hands, crafts from aluminum beer cans

The gypsum mixture must be prepared following the instructions indicated on the package. It is important to strictly observe the proportions of the dry mixture and water, otherwise the solution will turn out to be too liquid or too viscous. The solution hardens instantly, so you need to act quickly: apply it to the egg in a thin layer and smooth it out. You need to wear gloves when working: the gypsum mixture sticks to your hands.

When the plaster is dry, you can proceed to processing the egg:

  1. Using sandpaper, use gentle circular movements to sand the surface of the egg until smooth.
  2. Cut or saw the egg. It is more convenient to make a cross-section, closer to the narrow side of the egg. You will get 2 parts: a deep container and a lid.
  3. Glue 2 magnets inside the egg next to the cut, placing them one opposite the other. Glue 2 more magnets to the lid, placing them opposite the magnets in the egg.
  4. Cover the magnets with paper.
  5. Paint the egg, stick on inscriptions and pictures.

Watch a video showing the process of making a large egg from a ball and plaster:

Now all that remains is to put the gift inside - and you can give the egg to the baby. To make the surprise even more unexpected, the egg can be hidden in a box or opaque bag.

Crafts made from gypsum materials

How to make a large kinder smooth? To make the surface stronger and smoother, it is necessary to cover the paper blank with gypsum. Papier mache is made according to the above scheme up to the point - creating a door.

Additional materials:

  1. Gypsum putty.
  2. Putty knife.
  3. A pair of gloves.
  4. Small saw.
  5. 4 magnets.

Apply gypsum putty to the finished paper surface and let it dry. After this, we cut out the door of any shape.

In this case, fastening is carried out using magnets, not ribbons, so we attach them to the door, sealing them with a paper layer. We also attach magnets to the base of the shell and arrange them according to the fasteners on the door.

Note!

  • DIY doll bed: how to make furniture for a baby doll out of cardboard, box or paper
  • How to make a Dove of Peace craft from paper with your own hands, step-by-step instructions with photo examples
  • Do-it-yourself owl - how to sew an owl, an owlet, an owl silhouette from fabric. Simple ways to create crafts

Having checked the closing system that it works well, we begin sanding the gypsum kinder with a fine sandpaper to eliminate any bumps or roughness.

We check for defects; if necessary, you can cover the product with another layer of plaster, let it dry, and then polish it with sandpaper in lumpy places. Then you can sign it with paint, making a company inscription.

It’s better to print a Kinder Surprise sticker from the Internet, suitable for a large egg; if it is impossible to print it in color, then color it with paints. The plaster specimen is very durable; in the future, kids can arrange storage for their toys in it.

How to make a kinder surprise from chocolate?

Another option for a homemade surprise is a large chocolate egg. Such a gift is not only interesting, but also very tasty. And if you put sweets or small toys inside the egg, it will become just like store-bought, only much better.

To prepare the egg you will need:

  • 10-15 bars of dark chocolate
  • 10 white chocolate bars;
  • cream injector;
  • hair dryer;
  • filling mold or balloon;
  • a pair of rubber gloves;
  • deep plate, spoon.

You need to decide what will be used for filling - a special silicone or plastic mold, consisting of two halves, or a ball. Of course, it’s easier to work with a ready-made form. But to find it, you will have to go shopping or order it online. The ball is a cheap and accessible replacement, but working with it will require care.

The egg will harden in the refrigerator, this must be taken into account: if the surprise turns out to be too large, it may not fit between the shelves.

Cooking an egg in a mold

First you need to prepare the chocolate mass. To do this you should:

  1. Break the dark chocolate bars into small pieces, place them in a deep bowl and place it in a water bath.
  2. Stir with a spoon or spatula until the chocolate has completely melted. The mass must be removed from the heat and allowed to cool to room temperature. It should be viscous and homogeneous.
  3. Fill the syringe with cooled chocolate and apply the chocolate evenly to the walls of the mold.
  4. Place the mold in the refrigerator for 1-1.5 hours.
  5. While the chocolate in the mold is cooling, melt the white chocolate.
  6. Remove the mold, fill the syringe with white chocolate and cover the sides of the egg with a second layer. You should try to touch the mold with your hands as little as possible so that the chocolate does not melt from their heat. Be sure to use gloves.
  7. Place in the refrigerator again for 1 hour.
  8. The finished egg ladles need to be removed from the mold and a surprise placed in one half. Wash toys and other inedible gifts first with soap and water and rinse with clean water.
  9. Heat a spoon in hot water and run the back side along the edge of the egg halves, connecting them.
  10. Use the remaining dark chocolate to coat the joint area so that the halves stick together.

The egg is ready. To achieve complete resemblance to a factory Kinder Surprise, you should wrap it. For this you will need foil. From it you need to cut two pieces in the shape of an egg, adding 10 cm to them from the edges. Place the egg on one piece and fold the edges. Place the second one on top and press lightly. Stick the inscription “Kinder Surprise” on top, and the sweet gift is ready.

Cooking an egg using a ball

To cook an egg you will need a durable ball without patterns. It needs to be washed and dried from the inside (this can be done conveniently with a hair dryer). Prepare the chocolate mass and start creating the egg:

  1. Remove the tip from the syringe and pull the ball onto it. Pull out the plunger and inflate the balloon to the desired size.
  2. Using a spoon, pour the chocolate into the ball.
  3. The filled ball must be carefully tied and rotated until the chocolate is distributed evenly over the walls.
  4. The ball should be placed on a plate with its tail facing up.
  5. Prepare white chocolate.
  6. When the ball hardens, remove the workpiece.
  7. Cut off the top, remove the ball, being careful not to damage the walls of the egg.
  8. Distribute white chocolate along the walls, making sure to spread the top as well.
  9. Place in the refrigerator again.
  10. Place a gift into the finished egg, connect and seal the halves.
  11. Pack the kinder surprise as in the first preparation option, or come up with your own packaging option.

Watch the video on how to make a large chocolate kinder surprise with your own hands:

Homemade chocolate kinder

When mom doesn’t trust store-bought chocolate, we’ll make it ourselves!

The simplest recipe is cocoa powder, sugar, milk and butter. The milk needs to be warmed well, add sugar and cocoa, and boil a little without bringing to a boil. Add melted butter to this mixture and let it boil. Reduce heat and leave for another couple of minutes. Chocolate is ready! The products should be used in the following proportions: per 100g of cocoa powder:

  • milk – 2 tbsp;
  • sugar – 1 tsp;
  • butter – 50g.

If you are a supporter of classic recipes, then let's prepare real milk chocolate. We take:

  • grated cocoa – 20g;
  • cocoa butter – 25g;
  • powdered sugar – 30g;
  • milk – 20g;
  • powdered milk – 35g.

Place cocoa (both grated and butter) in a water bath. Separately dissolve dry milk and powder in milk. You can warm up the mixture a little. Next, carefully pour it into the cocoa and hold for about 2 minutes, stirring thoroughly. Chocolate is ready!

To prepare white chocolate, you need to take equal parts cocoa butter, powdered sugar, milk powder and vanilla. Bring cocoa butter to a liquid state in a water bath. Its melting point is only 40 degrees, so it is very important to make the bath correctly. Add the dry mixture into the liquid mixture one by one and stir well. This chocolate will turn out incredibly aromatic and its taste is much better than its store-bought counterpart.

If suddenly you cannot find cocoa butter, you can do without it. Dissolve 150g of milk powder in 12 tablespoons of water. Powdered sugar should be added to taste, it all depends on how much the child has a sweet tooth. You can add vinyl for flavor.

Homemade chocolate takes a little longer to harden than melted factory-made chocolate bars.

Making a large Kinder Surprise out of paper step by step with your own hands

A huge Kinder is the embodiment of dreams and delight for every child! They are especially loved for the surprises that are hidden inside, and we can fill this egg with those gifts and sweets that your child loves most. The shell or shell is made using the papier-mâché technique, I think every parent became familiar with this technique in school, so anyone can create this masterpiece!

We will need:

  • Balloon - 1 pc.
  • Paper (A4 form, newspaper)
  • PVA glue
  • Starch or flour for gluestar
  • Gouache paint
  • Brush
  • Water
  • Printout with inscription

Manufacturing process:

  1. As you probably already guessed, our Kinder is made from paper and a balloon; we will paste the paper over the balloon. You can use PVA or paste as glue.

Important! To prepare the paste, mix tbsp. spoon of corn starch, with 2 tbsp. spoons of tap water, stir so that there are no lumps. Then pour half a glass of boiling water over the mixture, stir and place the dishes on the fire, stirring continuously until our paste thickens. Remove from heat. stirring persistently, cool and that’s it - our paste is ready!

I use PVA glue, first diluted with a small amount of water.

2. We inflate the balloon to the size we need, tie it with thread so that after we can untie it. Place it in a bowl or other container for ease of handling.

3. 1st layer - paper + water. We cut the paper into small squares or strips, dip them in water and cover our ball. You need to do everything intensively, as the water dries out quickly and the leaves will simply begin to peel off.

Important! You can replace the paper with newspapers or magazines, and cover only the last layer with white!

In this way we cover the entire ball and let it stand for 5 minutes and dry.

4. We glue the next layer using PVA glue or paste. We coat our ball with glue and glue the second layer of paper.

5. Then generously coat the third layer of paper with glue and glue and leave our egg overnight so that it dries thoroughly.

Important! There should be enough glue to soak the paper well!

I left the ball to dry near the battery in a container with holes. You can dry it by tying it with a string, but I found reviews that when the ball hangs, wrinkles may appear during the drying process and I didn’t take any risks.

We recommend reading: Jacquard patterns with knitting needles - step-by-step instructions for creating stylish patterns with your own hands

6. The ball dried out overnight. Next we need to remove the balloon, to do this you just need to untie it or cut off the “tail” so that it deflates and carefully pull it out. Now you need to seal the resulting hole.

7. The next day I glued 3 layers of paper again and now my kinders are drying out, although they are quite strong and perhaps 3 layers would be enough.

8. The next step is painting our craft. Immediately paint the lower part red, having previously drawn out the waves with a simple pencil, and then the upper part white. You can paint with gouache, acrylic paint or water-based paint

Important! Add a little PVA to the gouache so that the paint does not stick to your hands and does not crack when drying.

9. Then you need to glue the inscription or draw the letters yourself. The easiest way is, of course, to print it, you can do it in color or black and white, and then color it yourself, so it will turn out the most realistic. Or attach a white piece of paper to the monitor and circle the letters.

For you, I will leave the inscription in 2 options, and you choose the one that is convenient for you:

  • in color

  • black and white

10. Now you need to cut each word and glue it separately.

11. This is what Kinder ends up looking like

12. Now you need to make a door in the egg and fill it with a gift. Using a stationery knife, cut it into a square or round shape; for beauty, you can tie it with a ribbon.

Or you can even carefully cut off the top of the kinder, this is at your discretion.

As a result, we should end up with a large egg like this:

Really, it makes a great gift, doesn't it? It can be given as a gift for the New Year, for a birthday, or for any occasion! You can also make the kinder personalized, glue your child’s favorite cartoon characters on it, write a wish, and in a word, there’s room for your imagination to run wild!

You can make not only a kinder, but also a large mmdms or a smiley.

Paper Kinder

The next type of Kinder surprise is an inedible egg made of paper and filled with a variety of toys and treats. This variety is used as a gift intended for a child on any holiday.

How to make Kinder out of paper:

Inflate a balloon. Shred the paper to obtain uniform pieces. Prepare a sticky substance from starch. Cover the ball with paper pieces.

Cover the glued ball with another layer of starch glue. Repeat the procedure of covering the ball with paper and glue - 2 times. Allow the ball to dry (approximate drying time 9-10 hours).

Pierce the ball as soon as the paper and glue are dry. To do this, you need to make a small hole on the paper surface (the procedure requires extreme caution).

Make a hole so that you can put a gift through it. Seal the hole with strong paper.

Decorate the egg as you wish: paint it with gouache, cover it with stickers, wrap it in foil, etc.

Papier-mâché technique

To create a package in the shape of a large egg, you will need to make papier-mâché. This technique involves gluing paper onto a template - an object whose shape needs to be repeated. In this case, you will need the shape of a huge egg, which can be achieved using a balloon.

The papier-mâché technique was invented in China, from where it spread to France and became famous throughout the world. Initially, it became popular in France thanks to decorative items from China and Japan, which quickly attracted attention and became popular in Europe.

What items were created

This simple and accessible technique made it possible to create various three-dimensional objects that were decorated with painting, embossing and varnishing.

Thanks to this technique, the following items were made:

  • Decorative stucco for walls and ceilings.
  • Some pieces of furniture.
  • Theater props.
  • Masks.
  • Snuff boxes.
  • Dishes.
  • Caskets.
  • Trays.
  • Dummies.
  • Dolls.
  • Frames.
  • Vases.
  • Bijouterie.
  • New Year's toys.

Currently, this technique is often used in theater and cinema. Dummies of various objects are made that look almost no different from the real thing, as well as parts of stage costumes. This technique is also used for the production of factory products, for example, some types of lamps.

Ways to use technology

There are several methods that are used to create various products:

  • Layer-by-layer gluing of pieces of paper onto the prepared template.
  • A special mass is used, which is made from paper, glue and chalk. This mass is used for modeling, and objects are also made from it using molds into which the mass is poured.
  • Sheets of cardboard are glued together and pressed. When the product blank is completely dry, it is sanded, painted and varnished. In this way, the most durable products are created.

To make papier-mâché Kinder Surprise, the method of gluing paper pieces onto a ball is suitable.

Master class paper eggs

The master class will tell you how to make a huge kinder surprise from papier-mâché. It should be noted that working on papier-mâché will take several days, since the layers of glued paper will need to be dried well, otherwise the craft will be deformed. So, how to make a kinder surprise out of paper?

Homemade massager

This thing will be useful not only for a child, but also for an adult, because with its help you can give a full massage to the muscles of the back, arms, and legs.

You will need:

  • 12 plastic containers,
  • twine or fishing line,
  • tight rope,
  • scissors.

Step-by-step master class:

  1. We make holes in the containers on both sides (larger ones in those at the edges),
  2. We thread twine or fishing line through the holes and connect the containers together using the principle of beading.
  3. We thread thick ropes into the outer containers - the handles of the massager.

Using this principle and from the same materials, you can make a double or triple massager. To do this you will only need more containers.

A plastic container from kinder eggs can also be used as a chest for storing small items, without being too lazy to decorate it first.

Now the purchase of a Kinder surprise can be considered three times useful: chocolate, a surprise toy and material for an original craft. Show your children photos of crafts, and they will definitely become interested in this type of creativity.

Homemade kinder surprise made from paper

✔️ In this version, the egg is made from a ball that needs to be covered with paper. For gluing, you can use PVA glue or prepare a homemade paste.

To prepare the paste, you need:

  1. Mix 1 tbsp. l. corn starch and 2 tbsp. l. tap water.
  2. To stir thoroughly.
  3. Take half a glass of boiling water and pour it over the mixture.
  4. Stir and put the mixture on fire.
  5. Stir continuously until thickened.
  6. Remove from heat and stir a little more.
  7. Refrigerate before use.

You can first add water to PVA glue.

To make a huge egg you will need:

  • printed inscription;
  • water;
  • balloon;
  • A4 paper;
  • newspaper;
  • PVA glue;
  • paints (gouache);
  • water;
  • to prepare the paste, starch or flour;
  • brush.




Steps to make an egg:

  1. The balloon is inflated to the required size and tied with thread so that it can be untied later.
  2. To make it more convenient to work with the ball, it must be placed in some container.
  3. Apply the first layer, which consists of water and paper. The paper is cut into small squares. Then dip each square in water and place it on the ball. This is how the entire surface is covered. All actions must be carried out at a fast pace, as the water dries quickly and the sheets of paper will begin to fall off. Instead of paper, you can use newspapers. Then the ball is covered with white paper last.
  4. After the entire ball is covered, you need to let it stand for 5 minutes to dry.
  5. The next layer consists of glue or homemade paste and paper. The ball is generously coated with adhesive and a second layer of paper is glued on. In order for the paper to be well saturated, you need a lot of glue or paste.
  6. Next, the future egg is also generously coated with glue and a third layer of paper is glued on.
  7. Leave the egg overnight to dry completely. It is best to dry near the radiator.
  8. After the paper has completely dried, the stage of removing the ball begins. To do this, the tail is untied or cut off, and then the ball is carefully removed. The resulting hole must be sealed.
  9. The next day, three layers are glued again and dried again.
  10. Then you should paint the egg: to do this, draw a wavy line on the lower part with a simple pencil, and then paint it with red gouache. The upper part is painted white gouache. Instead of gouache, you can use acrylic paints or water-based emulsion. It is worth adding PVA glue to gouache paints, then the paint will not crack or stick to your hands while it dries.
  11. Next step: make an inscription. You can print it on a color printer or draw the letters yourself and color them. In your own performance it will look more real. You can attach a piece of paper to the monitor and trace the letters. Then cut each word and glue it individually.
  12. Next, a “door” is made in the egg. Its shape can be square or round. Cut with a stationery knife. Inside is filled with a gift.

You can write the child's name on the egg or stick your favorite cartoon characters on it, or you can make it in the form of a smiley face or mmdms. By applying varnish the surface can be made glossy.

Huge egg made of plaster and paper

This version of the egg will be stronger and smoother.

To create a kinder you will need:

  • printed inscription;
  • water;
  • balloon;
  • A4 paper;
  • newspaper;
  • PVA glue;
  • paints (acrylic);
  • water;
  • to prepare the paste - starch or flour;
  • brush;
  • gypsum;
  • sandpaper;
  • for a magnetic door: magnet, cardboard;
  • putty or self-hardening clay.

Manufacturing steps:

  1. The balloon is also inflated, covered with paper and dried. The description is given in the previous method. Pasted in three layers.
  2. After the workpiece has completely dried, the balloon bursts and is removed through the hole. The hole is sealed.
  3. Next comes the priming stage. For this, putty or plaster is used. The layer should be applied evenly.
  4. After the putty or plaster has completely dried, the stage of making a hole in order to put the gifts is carried out. The hole will be a door that can be removed. A stationery knife is used to cut it out.
  5. To make it possible to remove the door, a magnet is glued into it, and the top is sealed with paper in several layers. Cardboard is glued into the base, then a magnet is placed, and paper is placed on top. Gluing is done using PVA glue.
  6. The egg and door are sanded with coarse sandpaper. This gives the egg perfect smoothness.
  7. After sanding, pits and depressions appear on the egg. In those places where they are deeper, plaster is re-applied, time is waited for drying and sanded with fine-grain sandpaper.
  8. Next is the painting stage. Waves are painted in the lower part with red acrylic paint, and the upper part is painted white. Then the inscription is printed on a color printer, each letter is cut out and pasted onto the “kinder”. It is also possible to write letters with a simple pencil and paint them with colored acrylic paints.

✔️ This gift, created with our own efforts, is suitable for any holiday ✨️ . It will be original and unusual. Not a single child will remain indifferent to him. Any gift can be placed inside such an egg: sweets, toys, etc. This egg with a gift can also be presented to an adult.

How to make a kinder surprise at home

You can make big kinder surprises with your own hands even with minimal experience. Cardboard, paper, and sweets are used to make the base. The easiest option is to use papier-mâché. All that is required is to prepare the necessary equipment.

To make a kinder surprise you will need:

  • water vessel;
  • balloon;
  • stationery scissors;
  • brushes;
  • threads;
  • gouache;
  • thin paper;
  • PVA glue;
  • chocolates and surprises to fill the eggs.

Online stores offer inscriptions for decorating chocolate eggs. They are produced both standard and registered. You can draw such an inscription yourself and leave it in black and white. Thanks to this, the child will be able to paint the gift he received on his own.

Making kinder with your own hands:

  1. The balloon must be inflated and tied tightly with thread.
  2. For maximum stability, it is placed in a basin filled with water.
  3. Several sheets of thin paper should be torn into small particles.
  4. Each piece of paper must be moistened in water and quickly applied to the ball.
  5. Leave the first layer of paper for 5 minutes, then use glue to glue several more layers on top - the more paper layers, the denser and more reliable the kinder surprise will be.
  6. The thread used to tie the balloon needs to be cut off.
  7. At the final stage, the kinder should be painted with gouache mixed with a small amount of PVA glue, and the prepared inscriptions should be pasted.

For Kinder surprises, you need to cut out a small rectangular window from paper and fill it with delicious sweets and small toys. After this, the window can be slightly fixed with glue or tied with a beautiful bow.

Papier-mâché is also used to make eggs at home, thanks to which the kinder will be denser and more reliable. For papier-mâché, you need to mix PVA glue with water in equal quantities. Pour this mixture over pieces of paper, mix thoroughly and leave for 7–9 hours, then use to decorate a chocolate surprise.

How to fill a large Kinder Surprise egg, ideas with photos

You can fill the egg with anything, from sweets to clothes. It all depends on the gender of the child, his desires and your financial capabilities. It is important that the gifts are not too heavy, otherwise the bottom may crack before delivery. We have prepared several options for ideas on what can be placed in a surprise egg.

1. Soft toy, modeling material, sweets.

2. LOL doll, Barbie doll, elastic bands and hair clips, a set of cosmetics for girls, sweets.

3. Beyblade, Hot Wheels, cardboard construction set, metal construction set, sweets.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]