DIY earrings: 100 photos of the best ideas on how to make beautiful earrings

Earrings made of polymer clay in the shape of balls

If you are new to making crafts from polymer clay, the presented master classes that help you create simple earrings are exactly what you need.

The following will be useful for work:

Polymer clay in your favorite colors.
Knife.
Accessories (studs, plugs, earrings, rings, etc.).
Gloves.
Toothpicks.
Needle nose pliers.
Glue.
Varnish for polymer clay.
Plast machine or rolling pin.
Blade.
Brush.

Master Class

To make earrings from polymer clay in the shape of balls, roll a small piece of plastic of the chosen color into a “sausage” of the diameter you need.
Cut two pieces 2 cm long and two pieces 1.5 cm long from it. Form each of them into an even ball with your palms.
In balls with a smaller diameter, use a toothpick to make holes for the silicone plugs, and then place the plugs themselves in them.
Align the edges so that the seams are not visible.
In balls with a larger diameter, use a toothpick to make holes for the pins, insert the pins and also trim the edges.
Bake the blanks in the oven, as stated in the instructions for the plastic material, and the “fake” earrings or fake earrings made of polymer clay in the shape of balls are ready.

Making tassel earrings with your own hands

No less popular are long thread earrings - tassel earrings. To make them yourself in the simplest version, you only need a base and a brush itself. These elements can be connected in two ways:

use a special limit switch;
Carefully thread all the threads through the metal ring, and then attach to the base.

Regarding the knot obtained during the creation of the tassel, it can be hidden under the bead caps or left as is. Using a cap, products are often decorated with various elements. You don’t have to buy hats; you can create them yourself.

There are no clear rules for what dangling tassel earrings that you create yourself should look like. They may differ in:

number of brushes - one, several;
size - the same length or different, single-level or multi-level;
tassel material - threads, chains, suede laces, beads and more;
the presence of additional decorations.

Flower earrings made of polymer clay

Using a similar principle, in addition to earrings, you can make a ring from polymer clay by gluing a cabochon with roses onto a special blank that fits your size. The result is a feminine set that subtly emphasizes the dreaminess and romance of your nature.

In order to make earrings with flowers, you need, as you already understood, heat-baked polymer clay, or, more simply put, it is plastic.

The plastic needs to be prepared for work. To do this, you need to knead it well in your hands. You need to knead for at least a few minutes. From the warmth of your hands, thermo-baked polymer clay, as a rule, becomes elastic, pliable, and soft.

Once the heat-baked polymer clay is prepared for use, you can get down to business.

How to make earrings from epoxy resin

Accessories made of epoxy resin are an unusual, stylish and original option. It is quite possible to create earrings from epoxy resin with your own hands, but you should learn the rules for working with such material and know a few secrets. Namely:

Molds for pouring should be taken only from high-quality platinum silicone, which allows you to control the pouring process and easily remove the finished product.
During the polymerization process, the resin is heated to high temperatures. You should only work with it wearing protective equipment, and the forms must be heat-resistant.
To make decorative elements look advantageous, you need to distribute the resin correctly and monitor its consistency.
A transparent product is much prettier than a cloudy one, so you definitely need to wait until the air bubbles come out of the product.
Preparing the decor is no less important. If leaves and flowers are used, they must first be dried.

The most popular decor in products made from epoxy resin are: glitter, rhinestones, beads, dried flowers, greenery, wood.

Decorative elements that go well with resin:

Herbarium - flowers, leaves, berries, petals, stems, seeds. The only condition: they must be dried well, otherwise the decoration will darken and the plants will turn yellow.
“Complex decor” - elements that form a lot of air bubbles: palm fiber, lace, skeletonized leaves. When decorated by hand, it looks incredibly impressive.
Potal is an imitation of liquid metal. It can be placed in a chaotic disorder, in the form of compressed lumps, or stretched across the surface. In any case, aesthetically it looks very original and elegant.
Beads are a difficult material to work with, but in combination with resin they look beautiful. When filling the mold, you need to be extremely careful so that the beads do not fall to the foreground.
Mica for nail art - provides an opal effect.
Acrylic - used to add color to resin.
Polymer clay - additions made from a baked eraser look extremely bright and unusual.

It is also worth mentioning that using epoxy resin you can make earrings with dried flowers in three-dimensional forms. It looks as unusual and fascinating as possible. To create such earrings, you need to purchase in advance or make your own mold for filling.

After hardening, the product is sanded and attached to a hook-clasp.

Polymer clay earrings for beginners

Any woman wants to give her appearance maximum elegance and inimitability. To stand out from the crowd with original jewelry, you can try making your own earrings from polymer clay.

A distinctive feature of this material is that it can be given any shape. In addition, no experience is required at all, just a little patience.

Before you start making jewelry from polymer clay, you should think about the appearance of the product, everything down to the smallest detail. This will help you choose the right materials and not be disappointed with the result.

If you have certain drawing skills, you can sketch the appearance of the earrings using colored pencils. This is especially true if several colors will be used in the product or the design itself is quite complex.

At the design stage, do not forget to take into account the method of attaching the earring to the ear, that is, think about the lock.

Necessary materials for making earrings

To learn how to weave with beads, you can start with simple jewelry, such as earrings.

To do this you will need:

Beads, it is better to have several colors that are harmoniously combined with each other. To make the jewelry look beautiful and presentable, you need to use high-quality beads; today they are produced in countries such as Japan and the Czech Republic; medium-quality beads are produced in China; the cost is also cheaper and is quite suitable for the first simple works. By the way, beads are not only slightly oblong glass beads; in the modern world there are many varieties of beads, both in material (glass, plastic and even metal) and in shape: oblong beads, round, glass beads. It is better to buy beads with a reserve in the future, you will also need them. But if it is not enough for the planned earrings during the work process, there is always a possibility that this shade may not be available in the store. In addition, purchasing additional beads for a semi-finished product is always additional steps that can initially be avoided in the process of preparing for work.
Fishing line, by the way, in addition to it, as a material for fastening beads, you can use special fishing lines - elastic bands made of silicone, they have the ability to stretch, the likelihood that such decoration can break is minimal. Threads as a material for creating finished jewelry still do not lose their relevance. If the decoration has a complex shape, a thin metal wire will be suitable for this purpose.
Ear hooks. The accessories can also be varied: nails with a chain, hooks and many other options. It is necessary as the final stage of creating a complete decoration.
Scissors, pliers for cutting threads and fishing lines.

Before making the product, prepare all the necessary elements at once; beads, fishing lines, threads should be in reserve.

Earrings made of polymer clay master class

Lilac branches

To create dangling earrings from clay you will need the following tools and materials:

metal rods for jewelry with balls (pins);
awl, needle or toothpick;
scalpel (can be replaced with a stationery knife or nail scissors);
a modeling device for working with such materials, usually called a stack;
polymer clay yellow, white and lilac;
two chains (they determine the length of the earrings and are their basis);
clasps for earrings (earrings).

Such decorations will look especially beautiful if you create a smooth transition between flowers of different shades. That is, place inflorescences made of lilac clay closer to the shwenze, and white ones at the very bottom. To make flowers in the middle, you need to mix lilac and white materials in a 1:2 ratio.

This will create an intermediate shade that will perfectly complement the composition, creating an ombre effect.

Earrings are sculpted according to the following algorithm:

Prepare a clean surface, put gloves or finger caps on your hands.
The lilac-colored material is kneaded well, after which small pieces are pinched off and small droplets 5 millimeters long are formed. Using manicure scissors, three cuts are made at the wide end of the workpiece, which form 4 equal parts.
Then, using a modeling device, the cuts are moved apart in different directions, and with its blunt side, each part is pressed against a flat surface, forming thin petals. For a pair of long earrings you need to prepare about 20 of these flowers of different shades.
Balls on metal jewelry rods are coated with yellow clay. Then the rods are inserted into the center of each flower so that the yellow balls become their centers. Using a needle or toothpick, grooves are pressed into them, which divide the core into 4 equal parts.
The branches become thinner at the bottom, so you need to make closed buds from white material. To do this, pieces are pinched off from the clay and smaller droplets are formed than for lilac and light lilac flowers.
They are cut in the same way, formed into 4 equal parts, but petals are not made, but a rod with a ball is immediately threaded into the center of the workpiece, after which the cuts are closed again into a bud. In this case, the balls are not covered with yellow clay.
The finished flowers and buds are placed in the oven for firing. For how long to bake the products and at what temperature, see the instructions that should come with the material.
After firing, the earrings are collected. Using pliers, the tips of the rods located at the back of the flowers and buds are bent and secured in the links of the chains. When assembling the decoration, it is important to remember that the upper part should be more magnificent than the lower one.

Lilac branches are one of many decorations that can be made from this material.

Stud earrings made of polymer clay

Earrings can harmoniously complement an image, add playfulness and mystery, coquetry and mood to it.

For those who are not lazy to create jewelry with their own hands, we can advise you to make earrings with your own hands! You can create your own masterpiece from polymer clay, from which all sorts of objects are very easily sculpted.

You can create your own jewelry to match any outfit! It's exciting and simple, a little imagination, a little free time - and now you're already in a hurry to go on a date in a new accessory!

Peony earrings made of polymer clay

When making earrings for a special occasion, you should focus on more classic shapes. Therefore, it would be best to use a metal openwork base on which the polymer pattern will be placed.

You can use special paints on top of the clay that will imitate, for example, a mirror surface, mother-of-pearl, or a metallic effect.

Long earrings made of polymer clay

Of all the DIY jewelry, earrings provide the greatest scope for self-expression. And not only because you can use almost all known materials for needlework in your work. It is equally important that earrings are easy to match with any suit.

A strict office dress code, a luxurious evening dress, simple and comfortable everyday clothes - there is a pair for everything.

Here we have collected inspiring examples on which you can design your own jewelry. And if you really like the idea in the photo, there’s nothing stopping you from simply copying it.

We have supplemented the examples with useful tips and original master classes. For many decorations, complex instructions are not required; it is enough to repeat the steps after the author.

In some cases, everything is clear from just one picture. Watch, be inspired and... success in your creativity.

Tips for creating beaded earrings

Experienced needlewomen give some tips that will be useful for novice craftsmen:

It’s worth starting with easier and simpler execution schemes.
For the first works, you can do without the weaving technique and use more decorative elements.
For work, it is best to buy beads from a Czech manufacturer.
To create round earrings, it is better to use round beads for the base.
For long earrings, you can easily use beads of any shape.

Beads are one of the most interesting and original materials for creating jewelry such as earrings. Handmade beaded earrings are a stylish and extremely delicate feminine accessory.

Long earrings with flowers made of polymer clay

Polymer clay gives jewelry creators additional freedom. It is not always possible to find a bead or cabochon of the right type. And from clay you can make almost any figure and in any quantity.

This material is also irreplaceable when creating paired jewelry. For example, like these.

Another advantage of polymer clay is the ability to create custom patterns. In natural stones you have to choose a pattern from what is available. Here you can make almost anything you want.

Beaded earrings as an addition to a beautiful look

The image of a girl, a woman, consists of little things. And what if not jewelry is the very little things that complement our image. And handmade earrings will help make it original, memorable and unique. Beading can help you.

Jewelry made from this type of material belongs to costume jewelry, and as you know, there is never too much costume jewelry. As a rule, beaded jewelry is not combined with precious or other types of jewelry; it is quite difficult to make such a combination harmonious.

But from beads you can create entire sets of earrings, pendants, necklaces, rings that will delight you with their beauty and complement your beautiful image.

Simple earrings made of polymer clay

When working with plastic, a variety of techniques are used. The sausage technique is considered the most popular and very interesting.

Using this method, you can make unusual crafts in several identical copies, which is very convenient when creating bracelets and earrings.

Step-by-step instruction:

The orange plastic is rolled out into thin sausages of equal length.
After washing your hands with soap, heat white clay in your palms and roll out layers, the thickness of which should be minimal.
Each orange sausage is “dressed” in a white casing, cutting off the excess parts.
When all the sausages are placed in white clothes, each of them is given a triangular shape. To do this, simply press the sausage onto the table with three sides one at a time.
A thin rod is rolled from white clay.
Triangles are stuck around it, forming a flower.
The resulting block is wrapped in a sheet of thin white clay.
A layer of orange is placed on top.
The resulting sausage is rolled so that all layers stick together.
Using a stationery knife, cut the sausage into even pieces approximately 5 mm thick.

Using the described principle, you can make not only oranges, but also lemons, grapefruits and other citrus fruits, and even some vegetables from polymer clay .

A metal pin of the required size is placed on the side of the lobules. The product is baked, and then an earring hook is attached to the ring of the pin. By placing two pins in one piece of orange, the crafts can be assembled into a cute summer bracelet.

Weaving techniques and their variety

Having mastered several basic techniques, you can create countless beaded jewelry, including earrings in different styles^

Ladder seam. This technique is used both individually and to create a base of products on which various bead configurations can then be added. 2 beads are strung on a fishing line or thread, then the fishing line is passed through the first bead and tightened, aligning the beads, then the next ones are strung and so on.
Also, the most popular bead weaving techniques are: herringbone, mosaic, stitch, French, rectangular.

There are also several options for fastening or tying beads. A bead product can be woven using fishing line, thread, silicone fishing line, thread - rubber bands. Also, in more complex models of jewelry, earrings in particular, wire and glue are used. The beads are glued onto a pre-knitted fabric made from it.

Autumn earrings made of polymer clay

Cute earrings made of polymer clay

You can make miniature sweets from clay, which can only be distinguished from real ones by their size.

Instructions for creating cakes for decorations:

Choose the clay that will serve as the dough for the cake, as well as the color of the plastic for the cream.
Both colors are heated and rolled into 2 mm thick plates. To do this, you can use a glass bottle without a label.
There should be several layers. All of them are stacked one on top of the other, pressing a little on top.
Using a metal bottle cap, cut a circle from the resulting stack. The lid should have smooth edges. You can use a small diameter cutter to cut out cookies.
Next, the cake needs to be decorated. It can be wrapped in colored glaze from a different color of plastic. You can decorate the product with flowers or other elements.
The resulting cake is cut exactly as a real cake is cut into pieces.
The sections of each piece are lightly pierced with a toothpick to obtain the porosity of the sponge cake.
Pins are inserted into the cake pieces and the product is baked.

Photo of homemade earrings

Sources:

Show hidden content

htps://www.nuemoe.ru/kak-sdelat-serejki-svoimi-rukami-128
htps://www.kalinkapolinka.ru/75-idey-i-master-klassov-kak-sdelat-sergi-svoimi-rukami
http://mirrukodelija.ru/sergi-iz-bisera/
http://AlfaLady.org/rukodelie/391-sergi-iz-bisera-svoimi-rukami.html
http://sovets.net/10696-sergi-iz-bisera.html
http://sharm.click/rukodelie/sergi-iz-bisera.html
http://svoimirukami.guru/sergi-svoimi-rukami/

Earrings made of polymer clay geometry

In order to make simple earrings, you can take several types of bright, colored polymer clay and roll them into small sausages of arbitrary diameter and length.
Then put them together in a chaotic manner so that cubes or balls are formed.
Next, string them onto a wire base.
Bake in the oven according to the instructions for the polymer clay.
Secure it to the hook.
The clay can be varnished on top, or it can be left as is.

Tassel earrings made of beads and seed beads

For “Brushes” bead earrings, you need to take beads, two beads for the base, a nylon thread, a ribbon to match the beads, earrings, fasteners and huggers.

Step-by-step instructions for weaving tassel earrings

To create tassel earrings, follow the step-by-step master class:

It is necessary to make about 30 threads of beads, which should be sewn to the ribbon for convenience. After this, twist the thread and sew it into the tube.
Passing the needle through the ribbon, you need to sew a loop consisting of four beads at the top.
To make a cap for earring tassels, use the Ndebele weaving technique. The beaded bottom should be made so long that it wraps around the top of the tassel, and at the end the circle should be closed.
We put the formed element on the brush and then braid the top, for this each row will contain fewer beads than the previous one.
After this, you need to braid the bead base and connect all the elements together.

The beaded earrings are ready.

Watermelon earrings made of polymer clay

These watermelon earrings are perfect for summer especially! These earrings will go with many outfits, especially red and all kinds of red shades. Watermelon earrings are made in the form of watermelon shares.

You can make several sets of similar earrings; you can wear them with different outfits, to different places, or just give them as gifts.

You can make additional things and create a set, such as earrings, a necklace and an anklet, just use your imagination. If this is your first time working with polymer clay, read the basics of working with polymer clay.

Earrings with roses made of polymer clay

To create such a composition for earrings, you need to purchase the following set of tools and materials:

Blue, white, brown with glitter, pink polymer clay.
Blade (knife).
Toothpicks.
Gloves.
2 earrings.

In order to recreate the spirit of antiquity, you will need to imitate the gradual fading of colors, so you will need to take the material not in the original colors listed above, but prepare intermediate ones by mixing the original ones.

So, to understand how to make beautiful earrings from polymer clay yourself, carefully follow the step-by-step photos and descriptions:

Mix white, blue and pink plastic material in a 2:1:1 ratio. The result should be a uniform light lilac shade.
Take a small piece of the resulting clay and mix it with a small part of the blue one.
Divide the resulting mass in half and add a little blue. The result will be three shades - from the lightest to the darkest.
Next, work exclusively with gloves. Tear off a small piece from the darkest plastic, make a ball, flatten it into a circle, roll it into a tube.
Take a mass of medium-dark lilac shade, make a thin petal using the same technology, but do not roll it into a tube.
To form a rose for polymer clay earrings, wrap the previously obtained bud with this petal. Make at least 2 more petals of an intermediate shade and also attach them to the bud.
Next, make petals with a larger diameter from the lightest purple plastic, also using the method described above. Determine their number yourself depending on how lush the flower you want to get, but at least 3-4 pieces. Make the second rose in the same way.

Take the remaining lightest mixture and add a little pink to it. After thoroughly kneading, take a small piece and form it into an egg-shaped shape. This will be the core of the second rose for earrings made of polymer clay.
Next in the master class is the formation of 4 petals. They need to be made the same way as for the first flower - by rolling plastic balls and flattening them with your fingers into thin circles. Attach 4 thin petals to the egg-shaped center.
If you wish, make a second row of petals with a slightly larger diameter. Repeat the procedure to make the same rose for the second earring.

Next, make a large bud from the darkest mass. Separate a piece of clay, roll it into a ball, crush it into a circle with your fingers, and roll it into a tube. Make a petal in a well-known way, but in this case a large one, wrap it around half of the bud at once.
Wrap the remaining half with another petal. Make a second such flower for the second earring and two similar ones from pink clay. Then start preparing the base for earrings with roses made of polymer clay with your own hands.
Take the brown mixture with glitter, roll it into a ball with a diameter of 2 cm, cut it into 2 equal parts, form 2 cabochons. Cut the bottom off the first roses so they stick well and attach them to the cabochons. Press the edges with a toothpick.
Then attach the pink buds, as your imagination dictates, and then the last ones - the darkest ones. Press the edges with a toothpick, but only in cases where you will be placing green leaves in these areas. An example of creating a composition is shown in the photo.

Using a similar principle, in addition to earrings, you can make a ring from polymer clay by gluing a cabochon with roses onto a special blank that fits your size. The result is a feminine set that subtly emphasizes the dreaminess and romance of your nature.

Transferring an image to polymer clay

Clay is a fairly flexible material to work with. It allows you not only to create unusual crafts, but also to decorate them. The finished baked product can be varnished or painted with acrylic paint.

There is also the so-called decoupage on plastic, although in practice this technique involves a slightly different way of transferring an image onto clay.

You can transfer the image to almost any color of plastic. But decoupage using white clay is still optimal.

To transfer a picture to polymer clay, you will need:

Clay,
Rolling board, rolling pin, knife,
Picture,
cotton wool,
Water.

The image to be transferred must be edited in a graphics editor, turning it in mirror form.

Print the picture on a laser printer. This is a must! Images printed using other technology will not be transferred to plastic. Elements with a pattern will be an excellent basis from which you can make earrings from polymer clay.

Master class on image transfer:

Roll out the plastic into a thin plate, after moistening the board with a small amount of water. This is necessary so that after transfer the plate can be easily separated from the surface.
The image is cut out along the contour, retreating approximately 1 mm from the edge.
Place the picture face down on the plastic and press lightly.
With a cotton swab dipped in water, begin to soak the paper. You need to act slowly. Sudden movements may damage the image.
When the paper gets wet, its surface will gradually begin to roll off. You need to wet the paper with cotton very often. Use your fingers to remove the pellets and continue to peel the sheet until a thin layer of the image remains on the clay. Laser printers apply a microscopic film-like layer to the paper, which helps fix the image to the polymer clay.
When only the image remains on the plastic, it is carefully moistened again so as not to damage the surface of the design.
The edges of the plastic are cut off with a utility knife without touching the front part. At the same stage, the fittings are carefully attached.
The product is placed in a preheated oven.
The finished and cooled craft is washed under the tap and dried.
The product is coated with a thin layer of varnish using a soft small brush.

Clay earrings decorated with personalized greetings will be an excellent gift for any girl.

Long rose earrings made of polymer clay

I bring to your attention a master class on making beautiful earrings with roses. These polymer clay earrings are very easy to make and can be a wonderful gift.

To create them we will need:

polymer clay;
toothpicks;
pins with loop;
accessories for earrings (earrings, rings);
thin-nosed pliers, round-nose pliers.

First, let's make three roses for each earring. We sculpt flowers on a toothpick, two large flowers, two medium and two small. When the flower is ready, carefully cut off the bottom part with a knife.

Now we take the pins with the loop, apply them to the back side of the flower, and cover them with a small piece of plastic.

We send it to bake in the oven at the temperature indicated on the packaging of your plastic.

After baking, cut off the protruding part of the pins to make them shorter, and use round pliers to twist them into rings.

Now let's make the leaves. To do this, take green plastic, knead it well, roll it into a rope and cut it into pieces. From each piece we form a drop and flatten it between our fingers. Using stacks, we shape the leaf, make a hole for the fittings and pinch the tip of the leaf with your fingers. We bake the finished leaves in the oven.

After baking, we prepare the accessories for the earrings and begin assembling.

Using rings, we connect the roses together and attach the earrings.

Now we attach the leaves using rings. We attach one leaf to a large rose, and three leaves to each link between the roses.

These are such beautiful earrings! With them you can create an interesting image for a holiday or for a photo shoot.

Making openwork earrings

So, let's return to making earrings and try to make another version of a simple decoration - openwork earrings. They are made in boho style and correspond to this trend within the framework of the naturalness of their materials, lightness and ease and airiness of decoration.

To make it, you will need threads, special blanks in the form of a circle, beads, of course, a crochet hook, ear wires, as the final stage of making the jewelry.

We string the beads, securing them to a round base. Next, inserting a hook into each of the holes, we knit with single crochets. We knit 7 air loops and fasten them into the next hole, inserting and knitting a bead and so on until the end of the row. With each subsequent row, when forming air loops, you will need to reduce the number of arches so that the lower part of the earring takes on a triangular shape.

That's all, all that remains is to fasten the thread so that the decoration does not fall apart, and attach the base in the form of a hook. The earrings are ready.

Master class on polymer clay earrings “Winter Night”

These polymer clay earrings are easy to make, but in the end they turn out very beautiful.

For production we will need:

blue plastic;
stationery knife;
clay roller or pasta machine;
toothpicks;
ultra-fine blue glitters;
brush;
needle nose pliers;
accessories for jewelry (rings, earrings).

Take a piece of plastic, knead it well and roll it out into a layer approximately 2 mm thick.

Using a knife, cut the resulting layer into squares of different sizes. The largest are approximately 9 mm (8 pcs), the next are 8 mm (8 pcs) and 6 mm (8 pcs) and the smallest are 4 mm (14 pcs).

Now let's take the glitter. I used ultra-fine glitters that I once bought for manicures. Dip the brush into glitter and rub glitter into every detail. Excess glitter is easily brushed off and does not fall off when using the earrings for a long time. We do the same with the reverse side..

Using a toothpick, carefully make holes in the squares for the rings. In two small ones we make two holes from opposite corners.

Now we can send the parts to bake in the oven.

After baking, we begin collecting earrings. Let's prepare thin-nose pliers, rings, earrings and our squares.

To make it easier for us to assemble the earrings, we arrange the squares in order. First large, then descending. It turns out 4 pieces of a certain size for each earring. The smallest ones are 6 pcs.

Using thin-nose pliers, we thread small rings into each part. From slightly larger rings we assemble two chains of 5 links.

Now we take small rings and use them to connect 4 large squares to the bottom link of the chain.

In the same way, we attach 4 smaller squares to the next link, then 4 more to the next link, and 3 smallest ones to the remaining ones. It turns out that this is the preparation.

Now we connect a square with two holes using a ring on one side to the workpiece, and on the other side to a hook.

We assemble the second earring in the same way.

As a result, we get such beautiful and shimmering earrings.

DIY earrings - manufacturing technique, choice of materials and assembly of jewelry or jewelry (100 photos and videos)