4 master classes on how to make a loft-style chandelier with your own hands

An unusual and spectacular loft chandelier, hand-assembled from metal parts and electrical elements, is a must-have attribute of a room decorated in an industrial style. Designer products are not cheap, but they are quite easy to replicate. To make many lamps you will not need special skills, but you will need tools to work with the selected materials.

Options for chandeliers in the loft style with your own hands.

What to choose

The imagination of designers knows no bounds.
In terms of lighting, the runway is completely open for her. To avoid getting lost in flights of creative thought, pay attention to the popular lamp shapes:

1. Spiders. Simple and tasteful. Several wires of varying lengths are attached to the central hook. There is a light bulb on each “leg” of the spider. And, of course, no lampshades.
2. Upside down. The most ordinary table lamps, screwed directly to the ceiling beam, will create a sensation. The main thing is that the room has low ceilings.
3. Geometry. Diamonds, rectangles and trapezoids will fit perfectly into the overall mood of the room.
4. Giant floor lamp. By equipping a floor lamp with a long leg, we get a real indoor lighthouse.
5. Spots. Rows of lamps mounted on ceiling beams at equal distances from each other. A kind of point light in a new form.

Style Features

Everyone can easily imagine what a factory floor of the last century was like. This is the calling card of the style, to which elements of chic are added. Deliberately rough decor is combined with expensive accessories, as a tribute to bohemia. Thanks to the creative elite, Loft has its own special features:

• High ceilings that make the rooms spacious and rich.
• Rough beams on the ceiling, and sometimes floors or rafters, left in their original form.
• Absence of any partitions, walls, or dividers. Functional areas are separated from each other only by furniture, and, generally, it is not located along the walls.
• Large panoramic windows from ceiling to floor that fill the room with natural light.
• Unexpected design combinations of old and new. Time-worn machines from foot-operated machines are seen from a different angle in combination with cutting-edge technology. And a huge plasma TV sits next to a DIY Loft lamp.

Important! The Loft room is decorated in 2-3 shades that harmoniously combine with each other or contrast. The color scheme of the interior decor should not consist of too bright and catchy shades.

Master class No. 3: Loft table lamp made of pipes

Durable, easy-to-make, industrial-style desk arm suitable for office or home use. It practically “sheds” cold or warm white light through the pipeline, in which it is pleasant to work or engage in your hobby.

Tools and materials

1. One long nipple;
2. one short nipple;
3. 6 pipe squares;
4. 6 short nipples for connecting elbows;
5. 3 plumbing tees;
6. electric drill;
7. cord with socket and switch;
8. glue gun (hot glue);
9. insulating tape.

Manufacturing instructions

Step 1.

1. First, you need to clean all pipes with white spirit or a special cleaner
   ; if there are stickers, you need to remove them.
2. During work, the cord with the switch will have to be pulled through the pipes
   , so for now we will cut out the switch - it will be put in place later.

Step 2.

• We insert the lamp into the socket and pull the cord through the square.
• In order for the lamp socket to hold, we secure it with a glue gun
  , filling the cavity in the square, as shown in the photo.
• You need to pour it carefully, not reaching the thread.
• Let the glue dry.

Step 4.

Let's prepare a hole for the cord on the other side. To do this, use an electric drill to drill a hole in one of the tees.

First, imagine how the lamp will stand on the table, only then mark the drilling point and drill the part.

Step 5.

• We assemble threaded pipes using nipples, as shown in the photo.
• You should get: 4 corners
  , like the base of a table lamp, 3 tees twisted together, the factory hole is directed upward, and the one made, on the contrary, downwards, on the invisible side.
• Two nipples are connected to each other - this is the lamp holder. As assembly progresses, we pull the cable through the tubes.

Step 6.

We disassemble the switch that was cut out. We take out the old wires and use electrical tape to make a new twist, connecting the ends of the wires to the corresponding channels in the switch. Reassembling the switch.

Step 7

Check how the switch works and whether you are satisfied with the appearance and stability of the lamp. If something is wrong, in such a practical design it can be easily corrected by turning the parts.

A stable, comfortable and completely unexpected DIY designer lamp can safely be called an indispensable companion for your evenings!

You can also make a very stylish table lamp from copper pipes or empty bottles, a master class of these 2 lamps is in the material

Manufacturing instructions

I started by making a simple dryer holder out of wood. I wanted to make sure they wouldn't budge when I drilled them. Making such a holder is very simple: you need to cut a piece of wood that is shaped like the outer diameter of the dryer.

You will also have to use a step drill to cut a hole in the bottom in which the socket for the future lamp will be located. I then used a Dremel mini drill to clean up the edges a bit. It won't look very nice, but it will look better once you give everything a coat of black paint and are done. So you don’t have to worry too much about this for now.

The mesmerizing beauty of Ossetian women: photos

Garlic fertilizing and potassium fertilizer: how to increase strawberry yield significantly

It's easy to update an old countertop with concrete: a simple master class

Step-by-step master class with photos

1. Cut off the bottom of a larger bottle.

2. Drill or otherwise make holes in the covers. It is more convenient to work when the caps are on the bottles. Remember that the holes must be located strictly in the middle so that the thickness of the lampshade is the same on all sides. The hole should be of such a size that the tube fits freely into it.

3. Attach the tube to the cap of the bottom bottle.

3. Attach the top bottle.

As a result, you should have a design like this:

4.Secure the sides of the bottle with self-tapping screws. This will avoid displacement.

5. Prepare the concrete mixture. Fill the form. Remember to shake the bottle as you work to ensure a firm seal against the concrete. It can also be compacted with a stick.

Advice.

If you want the surface of the lamp to be smooth, use thick concrete. The liquid consistency will help create the unusual effect of a surface covered with shells.

Advice.

To make pouring concrete more convenient, you can place the bottles on a tin can (as shown in the photo below).

6. Once the concrete is compacted, you can remove the screws and tamp again by pressing on the smaller bottle. Be careful not to move the center. Shape the edge.

Advice.

The edge can be either smooth or asymmetrical.

7

After the concrete has partially dried (depending on the brand used), you can carefully remove the bottles. Do not forget that at this time the lampshade is fragile and can be easily damaged

If you are thinking about radically changing the look of your room or want to complement your home interior with a loft chandelier, then try making a loft-style chandelier from pipes with your own hands! Master classes with photos will help you with this.

By the way, the loft settled into interiors relatively recently - about 60 years ago, and to this day it is interesting for its variety of design concepts. It is appropriate both in large studios, where the living room is combined with a dining room, and in small rooms. DIY loft-style lamps are a compromise between fashion and style, extravagance and everyday life.

Familiar objects appear before us in a new light - this is a DIY loft lamp. Features include long chains for hanging from the ceiling, custom lampshades or compositions of many simple lamps and uses.

Making a loft-style lamp from pipes is quite simple, read master class 4 - see for yourself!

Materials and tools

• 5 large pear-shaped light bulbs;
• 10 brass (copper) tubes – 5 short and 5 long;
• fitting according to the diameter of the tubes;
• 1 longest brass tube – suspension axis (to the ceiling);
• 5 adjustable brass hinges;
• 5 ceramic light bulb sockets;
• two-core connecting wire (so that it passes freely into the copper tubes);
• electrical cable;
• insulating tape;
• screwdriver.

Chandelier manufacturing technology

Step 1

1. Let's do the wiring. To do this, unscrew the cartridge covers and connect the wires to each of them, as shown in the photo.
2. We pass the wires through the tubes
   , then use hinges to connect the short tubes to the long ones.
3. We cut off the wire, leaving a few centimeters for twisting
   with the main cable, which will be connected to the electrical network on the ceiling.
4. Screw the edge of the tube into the cartridge.

Step 2.

• We screw the “legs”
  of the future chandelier into the fitting and make the wiring again: we twist the white wires with the white core, and the black wires with the black wire, as shown in the photo. We wrap live parts with electrical tape.
• Carefully tuck the cable inside the main brass tube
  that will hold the chandelier. We fix it on the ceiling. After everything, we screw in the light bulbs.

The result is an urban chandelier that combines the simplicity and elegance of an industrial or elevator style with the light of large lamps.

Variety of style

Do-it-yourself Loft lamps can be made from various available materials, and this is the beauty of this style. Here are just a few similar examples:

• An excellent chandelier in the Loft style with your own hands can be made from an old lighting fixture, to which, instead of shades, you attach cups and saucers, placing the lamp inside the cup.
• The version of the first master class based on a plastic bottle can easily be transformed into an equally interesting DIY Loft style lamp if you use the simplest metal soda bottle instead of a concrete lampshade.
• Interesting wall options are obtained from simple plumbing pipes, where lamps are inserted into the joints and jumpers.
• A stylish chandelier in the Loft style is created with your own hands on the basis of a wooden circle, to which wine bottles are attached, with light bulbs inserted inside them.
• Even the most ordinary grater will be transformed if you turn it upside down and insert a socket with a lamp inside - this option will provide very unusual lighting.

DIY making

To decorate an original interior, it is not necessary to invest large sums of money and buy designer lamps; it is enough to master the simple making of loft-style lamps with your own hands and use your imagination a little.

Plate chandelier

One option is to prepare a metal plate or dish, then drill a small hole in the center for the insulating tube. The plate is painted with black or white paint; even paint smudges and drops are acceptable. After the plate has dried, a tube with wires is inserted into the drilled hole and connected to the cartridge. A retro-style LED lamp is suitable for such a lamp.

Lamp on a chain

Sometimes they make it even simpler. A long chain from the ceiling is attached to the ring, and pre-carefully insulated wires are passed down along it, intertwining the wires with the chain as desired. The wire with the socket brought to the bottom of the circuit will remain supplemented with a lamp. The chain can be pre-painted in any color, even with a spray can.

Brass chandelier

This option requires a larger set of materials and a little more effort. The lamp is made of pipes - they can be cast iron, brass, or combined metal. To make it you will need 5 lamps, 5 short and 5 long brass tubes, a fitting with the diameter of the tubes, a chandelier axis - a long brass tube, 5 brass hinges, 5 ceramic sockets, a two-core wire, an electric cable, a screwdriver and electrical tape. How to make such a chandelier yourself:

The wiring is done first. To do this, remove the covers of the ceramic cartridges and connect the wires to them, as in the photo.

The wires are threaded through the tubes, and long and short tubes are connected using hinges. Afterwards the wire is cut off, leaving a couple of centimeters free - they will be connected to the network from the ceiling. The edges of the tube are screwed into the cartridge.

The legs of the future chandelier are screwed into the fitting and the wiring is made - white wires to white, black to black, current-carrying wires are insulated with tape.

The cable is tucked into the middle of the brass tube that will lead to the ceiling, and it is immediately secured. Only after this the lamps are screwed in.

The resulting structure can be attached to the ceiling either directly through the tube or using an additional chain, which will be appropriate if the ceiling is high.

Sometimes, to create a loft interior, a suspended wooden beam is enough, onto which insulated long wires are simply wound with a socket at the end and an LED lamp.

Interesting ideas: what scrap materials can be used to make a cool chandelier

What is suitable for creating a ceiling chandelier with your own hands: twigs, wood, plywood, cardboard, beads and wire, disposable plates, paper. For one material you will need superglue, for another a welding machine, if we are talking about metal. In any case, the idea should be appropriate in the room.

Threads and balls have long been helpful in decorating a room as lamp shades. This is an excellent and accessible option for everyone PHOTO: mydesigninfo.ru

Article on the topic: DIY chandelier for a gazebo

Metal pipes and Edison lamps are suitable for loft style PHOTO: vannadecor.ru

Paper and thread will help bring your tender fantasies to life PHOTO: mognotak.ru

A fan of the worlds of Howard Loughcraft urgently needs such a chandelier PHOTO: tvojdizajn.ru

Anyone who loves nautical style and knows how to work on a lathe may be tempted by such a miracle PHOTO: stroy-podskazka.ru

Napkins turn into a lamp PHOTO: doka-master.ru

We wish you creative inspiration in creating the best ceiling lamp!

See if your idea is here.

• large pendant chandelier spider LSP-8174-36263.

Large pendant chandelier spider LSP-8174-36263
Hanging chandelier in the loft style from the Italian company LGO. Perfect for installation in the living room. When using the recommended lamps, it will be possible to illuminate an area of ​​48 square meters. m.

Cost about 8,000 rubles.

• large chandelier ATOM CH026-24-NI-36263.

Large chandelier ATOM CH026-24-NI-36263
Chandelier from the Italian company Gramercy Home. The model is perfect for a room with a large area. The chandelier has high power and has a chic design with pleasant colors.

Cost about 38,000 rubles.

• ceiling chandelier Gilbert T532CL-08B-36263.

Ceiling chandelier Gilbert T532CL-08B-36263
Ceiling chandelier from the German company Maytoni. Suitable for placement in a living room, bedroom, office, kitchen or cafe, made in the appropriate style. When using the recommended lamp power, it can illuminate an area of ​​24 square meters. m.

Cost about 7,000 rubles.

• ceiling chandelier Denley 70112/8-36263.

Article on the topic: DIY Tiffany chandelier

Ceiling chandelier Denley 70112/8-36263

The model from the Chinese brand Eurosvet is perfect for installation in the living room, kitchen or office. Lighting area – up to 32 sq. m. subject to the use of recommended lamps.

Cost about 11,500 rubles.

• floor lamp LSP with switch LSP-0513-36263.

Floor lamp LSP with switch LSP-0513-36263
Floor lamp with switch from the Italian brand Loft is perfect for installation in a living room or bedroom made in the loft style. Lighting area – up to 3 square meters. m.

Cost about 21,500 rubles.

Suitable materials, colors and shapes of lamps

Lighting devices for industrial interiors are made from simple materials with minimal decoration and processing.

In the manufacture of designs for hanging and floor-standing appliances, the following are used:

• glass;
• plastic;
• metal;
• stainless steel;
• wood.

To create lamps in an industrial style, it is popular to use finishing building materials that are stylized as retro. The work uses parts of metal pipes, ropes, cables, screws, fasteners, glass bottles, jars, plastic containers, old lamps, shades.

The color scheme of chandeliers and floor lamps is muted. Steel, bronze shades, gray, white, dark green, golden colors are popular. It is possible to paint the surfaces of the pendant chandelier in the central zone in a contrasting color (red, yellow, dark green, orange, mustard), the rest of the devices should be made from untreated metal, wood with a preserved structure.

For the stylistic direction, lamps in the form of floor lamps, sconces, stands, and chandeliers are used. Combining different textures and materials is popular. Bricks are combined with metal, concrete structures with stone and glass.

Lighting fixtures can be combined in a single space:

• wall;
• suspended ceiling;
• desktop;
• floor;
• street type.

Pendant-type lamps are designed to highlight functional areas in a room. A common option is to attach light bulbs to beams using cables or chains. The devices allow you to adjust the direction of the light flow. Designs should be simple, laconic in shape. A chandelier should combine several lamps; it is not recommended to use one light source.

Wall-mounted units are popular in spacious lofts. The elements must be of simple design, functional, and equipped with the ability to transform and rotate the light source. The devices are mounted on hanging hooks and chains. Devices should be equipped with convenient switches with length adjustment and located in the access zone. Wall sconces are placed to create accents on shelves with collections of photos, posters, and mirrors.

Tabletop lighting fixtures are used in different functional areas of the room (dining table, coffee table, workspace). Stands for 1-2 lamps are made of small curved pipes, valves, complemented by wood and a plastic lampshade. In rooms using glass and concrete, lamps with curved wooden legs, complemented by glass shades, are popular.

Floor structures are designed in the same style as table lamps. Floor lamps can be of different heights. Original designs are in the form of spotlights and spotlights, which are installed on a metal pipe or tripod.

The light should not be bright; dim lighting directed at the floor, wall, or area of ​​the room is recommended. Floor lamps can have one or many low-power bulbs. Metal stands are combined with the brickwork of the walls and are equipped with curved legs at the base.

Street lamps look original in an industrial style. It is necessary to select a model in accordance with the wall materials. The devices are equipped with medium power lamps. Devices can be wall-mounted (sconces), floor-mounted (racks), or built-in. The designs are stylized according to the trends: retro, vintage, complemented by visors. Metal surfaces are artificially aged and complemented with decoupage from old posters.

Types of lamps

Chandelier

Unique design design.

In a loft room, the purpose of pendant lamps is not only the main light. They help emphasize individual areas. The role of a chandelier is often played by a metal or wooden beam into which the sockets are mounted.

Sconce

Original sconce in the form of a tap.

Option No. 1 for wall lamps in loft interiors is the ability to rotate and tilt. Due to this, the sconce accentuates the area with light of different intensities. Wall lanterns are installed with hanging hooks or chains.

If you like industrial style

Industrial style is a direction in which everything that is hidden is shown. The walls are left unfinished, pipes and wires are not masked in any way, and rough materials predominate. This style is most often found in elevators and factory-type open spaces. In small rooms, the industrial style does not always look appropriate, since it visually makes the rooms smaller. However, individual elements: furniture, decorations and interior elements, made in this direction, can emphasize and dilute the usual design of the apartment. A lamp is far from the only way to do this. If you want to add something else to it, you can use leftover pipes, wood and flanges to create shelves.

Short dresses with boots and a few more stylish looks for spring 2022: photos

Any pepper contains alkaloids that help recover from COVID

My spontaneous find: Arzamasova on choosing a blue dress for her wedding

Features of working with PVC pipes

Plastic elements are inexpensive; they can be found in all plumbing stores and purchased in the required quantity. But in order to assemble a product with high-quality light that meets all safety standards, you need to remember a few simple tips:

1. When choosing a material, take into account its dimensions and plastic properties.
   If you have to bend elements, the pipes must be easy to heat and form. PVC elements are often welded using a special soldering iron.
2. Plastic is sensitive to high temperatures and can melt if overheated, so it is important to choose safe lamps for use in homemade lamps. LED or fluorescent types are best suited, since they heat up much less during operation.
3. When using couplings and connectors, select all parts with the same diameter and similar thread pitch.

You can combine metal and plastic parts in one product.

Possible difficulties

During the assembly of a lamp based on metal or metal-plastic pipes, the following number of difficulties may arise:

1. Fixation of the cartridge. This element can be securely fastened if you match it with the appropriate thread to the adapter. If this fails, it can simply be glued or placed on a universal sealant.
2. Chassis grounding. To comply with electrical safety rules, a metal lamp must be grounded. To do this, it is not necessary to pull the third core through all the pipe sections to the cartridge. It can be wound or soldered onto the outer surface of the base.
3. Securing the lampshade. To attach the chandelier elements to the lamp pipes, you need to adjust their mounting holes to the diameter of the part of the body where the lamp is located, or simply hang it on a wire.
4. Correct selection of components by size. To avoid disagreements between the parameters of the lamp parts, it is better to purchase all parts in one store, and also check in advance the compliance of the characteristics of all components.
5. Mounting the lamp. The lighting device is installed depending on its purpose - on the surface with the help of a base, on the wall with a mounting plane, on the ceiling with a suspended structure.
6. Compliance with electrical and fire safety standards. Light bulbs must be selected by power and type in accordance with operating conditions (temperature and humidity), wiring - by thickness depending on the load, contact materials - by degree of heating.
7. Competent decoupling of contacts in complex circuits. When assembling a lamp of any complexity, you need to be guided by a correctly drawn up electrical diagram.

Choice of material.

The lampshade is made from standard barbecue skewers, which are sold in hardware stores or relevant departments of supermarkets. Moreover, a large assortment is offered. That's why it's easy to find them. But if it is possible to whittle the skewers with your own hands, then this option is no worse, because the time spent on production is directly proportional to the purchase amount. Moreover, each option is good. So, to create a lampshade you will need:

• Skewers 19 cm – 5 pieces.
• 13 cm is also 5.
• 9 cm sticks – 10 units.
• 8 cm - 5.
• And 2.5 cm - again 5.

In addition, you should prepare a glue gun in advance, loading it with a rod, and paint the color in which the lamp shade will be painted. When the materials and tools are prepared, it’s time to start manufacturing. At this stage, the difficult is already behind us, and only pleasant creativity awaits ahead.

Step-by-step instructions for making it yourself.

The technology for creating a loft-style lampshade from barbecue skewers involves going through six simple stages. Namely:

Assembly begins with thirteen centimeter skewers. The task is to connect them with a pentagon. Therefore, the sticks should be glued together with hot glue. Moreover, the joints are reinforced with a dense layer. Excess substances, no need to worry, are removed later. Although in some cases this adds interest to the element being designed. The hot gun is considered instant, but it takes time to dry.

Article on the topic: Do-it-yourself homemade Chizhevsky chandelier

Now you will need ten sticks of nine centimeters each. They are connected into triangles, fastened at the top and at the base with a previously prepared pentagon.

Now you need five pieces eight centimeters long. They connect the resulting vertices. Already at this stage of making a designer lampshade with your own hands, you get a rather interesting design in the form of a ring of broken geometric elements.

Next, take the longest skewers. Namely nineteen centimeters. To continue working, the glued pentagonal structure is turned over one hundred and eighty degrees. The task is to attach the sticks to the upper base. They themselves will be connected in a small part. But if you want, you can make some kind of composition out of this, like a flower, or use the figure as a decorative element, fastening long skewers together to make something like a pyramid.

But since the purpose of production is a lampshade for hanging in a loft style with your own hands, you need to come up with a mount. Therefore, the tops of long wooden barbecue sticks are connected in small sections. Here comes another pentagon, only a small one, whose area should correspond to the diameter of the light bulb socket.

The resulting structure is painted in the desired color using acrylic paint in a spray can. After which it is left for two hours until completely dry. An interesting lampshade for a loft-style lamp made of wooden sticks is ready!

If you like industrial style

Industrial style is a direction in which everything that is hidden is shown. The walls are left unfinished, pipes and wires are not masked in any way, and rough materials predominate. This style is most often found in elevators and factory-type open spaces. In small rooms, the industrial style does not always look appropriate, since it visually makes the rooms smaller. However, individual elements: furniture, decorations and interior elements, made in this direction, can emphasize and dilute the usual design of the apartment. A lamp is far from the only way to do this. If you want to add something else to it, you can use leftover pipes, wood and flanges to create shelves.

The Beatles are sorry that they broke up: a janitor from Tomsk spoke about himself and his life

“The family is reunited”: Nadya Sysoeva invites you to live concerts of Comedy Woman

Biometric control of passengers is being introduced at two Russian airports

Materials and tools you will need

• 2 energy saving lamps.
• 2 stainless steel kitchen utensil drying racks from IKEA.
• 2 wooden boards measuring 10*10 cm. I used oak, but you can use other types of wood.
• 4 black steel flanges.
• 2 steel pipes with a diameter of 4 cm.
• 2 black steel pipes with a diameter of 6 cm.
• Black paint.
• Varnish.
• Transparent seal.
• Screws.
• Switch.
• Cord.

The following tools will need to be prepared:

We're not the only ones who train cats: scientists have discovered why they meow

The doctor explained why it is important to monitor your pace when jogging

Bobo, ruffles, patchwork: trendy denim items this spring that suit everyone

• Drill.
• A circular saw.
• Step drill bit for drill.
• Regular drills.
• Dremel mini drill.
• Milling tool for processing wood and plastic.
• Measuring square Speed ​​Square.
• The hand saw you will need to cut the pipe.

Track, pendant lamps in loft style

Tire lights are a great option in the industrial style.

Depending on the size of the room, they can be arranged in a row or in several. If you decide to use such options, it will be very correct. After all, they will emphasize the minimalism of the interior and the highest functionality of the entire structure.

In the atmosphere of an old industrial premises, simple and good rudeness will create charm. Busbar versions of lamps should be located exactly under the ceiling. This design looks simply great.

Lighting is better suited to zoning a space. But there are very few of them to illuminate the entire room, so it is worth using other methods.

Basic parameters when choosing a chandelier

There are several indicators that you should first keep in mind when buying a chandelier. We are talking about its size, type, color, style of execution.

Size

When choosing a chandelier, you should take into account the dimensions of the room where it will be placed. The lamp should not be too large so as not to create a feeling of overload in the interior

At the same time, the chandelier should not look too small - disproportionate to the scale of the room.

Parameters taken into account include height, diameter, and the number of arms or arms of the lighting fixture. To select a chandelier according to the size of the room, it is recommended to adhere to the following formula: width + length of the room × 10. The result of the calculation is the diameter of the chandelier (in centimeters). For example, the width of the room is 5 and the length is 7 m. The required diameter of the chandelier will be 120 cm (5+7×10=120).

Form

When selecting a chandelier, you need to consider its shape. This parameter is influenced by the characteristics of the room. For example, for a room with a high ceiling, it is advisable to choose a pendant type chandelier, as it will visually fill the space and give the room coziness.

But pendant lamps are not suitable for rooms with low ceilings: it is better to buy a flat ceiling model. Elongated lighting fixtures are suitable for long and narrow rooms: firstly, they visually follow the shape of the room, and secondly, they allow for more efficient lighting.

Color

Selecting the appropriate color for the device is another important parameter. The decision is made based on the overall color scheme in the room. For example, for a classic interior with a lot of details, a chandelier whose colors radiate warmth is best suited.

Type of design

You also need to choose the right type of structure for the appropriate situation. There are ceiling and pendant lamps. Above we talked about the relationship between ceiling height and chandelier design. You should also consider the type of room. For example, hanging products are more often used in living rooms, and ceiling ones in bathrooms.

Interior style

A correctly chosen chandelier should match the interior of the room. To avoid mistakes, it is recommended to adhere to the following rules:

1. Do not overuse the use of colored lamps. They provide light in a specific color range, which can significantly change the perception of the interior of a room. In addition, not all colors are comfortable from a psychological point of view.
2. For a room in a classic style, the best option is a crystal chandelier with five arms or two tiers.
3. High-tech chandeliers include elements such as chrome rods or shades with a minimum number of details.
4. Plastic most often visually reduces the appearance of the room. Even expensive material is not suitable for all styles. For example, it may look ridiculous in a classic interior. However, in modern styles it is quite appropriate. Also, plastic parts fit harmoniously into interior solutions in kitchens, bathrooms and children's rooms.
5. The chandelier should not blend in with the color of the walls. The best option is a lamp that contrasts with the tone of the wallpaper or other finishing material.

Master class No. 3: Loft table lamp made of pipes

Durable, easy-to-make, industrial-style desk arm suitable for office or home use. It practically “sheds” cold or warm white light through the pipeline, in which it is pleasant to work or engage in your hobby.

Tools and materials

1. One long nipple;
2. one short nipple;
3. 6 pipe squares;
4. 6 short nipples for connecting elbows;
5. 3 plumbing tees;
6. electric drill;
7. cord with socket and switch;
8. glue gun (hot glue);
9. insulating tape.

Manufacturing instructions

Step 1.

1. First, you need to clean all pipes with white spirit or a special cleaner; if there are stickers, you need to remove them.
2. During work, the cord with the switch will have to be pulled through the pipes, so for now we will cut out the switch - it will be put in place later.

Step 2.

• We insert the lamp into the socket and pull the cord through the square.
• In order for the lamp socket to hold, we fix it with a glue gun, filling the cavity in the square, as shown in the photo.
• You need to pour it carefully, not reaching the thread.
• Let the glue dry.

Step 4.

Let's prepare a hole for the cord on the other side. To do this, use an electric drill to drill a hole in one of the tees.

First, imagine how the lamp will stand on the table, only then mark the drilling point and drill the part.

Step 5.

• We assemble threaded pipes using nipples, as shown in the photo.
• You should get: 4 corners, like the base of a table lamp, 3 tees twisted together, the factory hole is directed upward, and the one made, on the contrary, downwards, on the invisible side.
• Two nipples are connected to each other - this is the lamp holder. As assembly progresses, we pull the cable through the tubes.

Step 6.

We disassemble the switch that was cut out. We take out the old wires and use electrical tape to make a new twist, connecting the ends of the wires to the corresponding channels in the switch. Reassembling the switch.

Step 7

Check how the switch works and whether you are satisfied with the appearance and stability of the lamp. If something is wrong, in such a practical design it can be easily corrected by turning the parts.

A stable, comfortable and completely unexpected DIY designer lamp can safely be called an indispensable companion for your evenings!

You can also make a very stylish table lamp from copper pipes or empty bottles, a master class of these 2 lamps is in the material Table lamp from improvised materials.

Tube for cord

You can let the cord hang freely from the wall - it will look quite nice. But since I'm a perfectionist, I used a pipe to hide the wire in it. All you need to do is cut a piece of the required size and paint it black.

Her songs became the soundtrack to the TV series “Kadetstvo”: where did Mika Newton go?

Historical decline in influenza incidence due to pandemic

The age difference does not bother them: the young wife of Vladimir Gostyukhin

Then attach the lamp base to the bottom of the dryer. Attach a piece of metal pipe to the back side. Use a flange and screws to attach it to the surface of the wood.

If you want to paint your sconce, be sure to do it before you put everything together. It is best to use spray paint, which will spread evenly over the surface. You can wipe down the pipe of your industrial light with acetone (be sure to use gloves) and then spray with clear varnish to protect the surface. It is better to use a matte rather than glossy finish.

Thread the cord through the pipe and attach it to the tree. Then hang the sconce on the wall. In the evenings, when I turn it on, the light coming through the holes creates an absolutely stunning pattern on the walls.

How to make a lamp from wood with your own hands

What do you need

• Branches;
• hand jigsaw or other cutting tool;
• sandpaper;
• lamp base;
• deep wide lid;
• superglue or glue gun;
• bulb.

How to do

Cut the branches into many lengths. They should differ slightly from each other in length.

Go over all the branches thoroughly with sandpaper.

Glue the lamp base into the lid.

Glue one branch vertically to the side of the lid.

Next to it, glue another one to the lid and the first branch in the same way.

Continue gluing the remaining branches in a circle.

Cover the entire base with wood. Route the wire between the branches.

Screw a light bulb into the base.

Making a wall lamp from flexible metal-plastic

This type of pipe is mainly used for water supply.

If there are pieces of metal-plastic pipe left after laying plumbing, underfloor heating or heating, you can use it to create sconces. This is done like this:

1. 3 or more light sources are used, sockets for the lamps are selected, it is better if they are small in size. You also need pipes with a length of 25 to 50 cm, wires and a base made from a cut of wood or a piece of plywood.
2. Holes for pipes are drilled on the base, which can be secured with adhesive, and then the wires are pulled through. For convenient mounting of cartridges, you can cut out small elements from plywood or simply glue them to the sealant, after connecting the cable.
3. After installing the lamps, lampshades of suitable size are added from any available materials so that the light is directed to the right place.

The position of the lamps is easy to adjust due to the flexibility of the metal-plastic material.

Making a brass loft chandelier

The loft style is characterized by a combination of similar lamps in one area. But you can make your own chandelier, which will have shades of different shapes.

In this case, lamps of different lengths are hung on a massive beam made of wood or metal, which are decorated with brass caps of different shapes: cylindrical, semicircular or triangular. Design elements can include water taps, kitchen utensils and other scrap that remains after repairs.

The unifying link will be the material of the lampshades and decorations – brass.

What problems arise during the manufacturing process?

When implementing a project, many difficulties may arise, the most common are:

1. Different threads on fittings or mismatch in diameter.
2. Instability of the structure with a small base size.
3. Difficulty in attaching cartridges to thin pipes.
4. Strong heating of the lamp in plastic structures.
5. Poor quality insulation of wire connections.

Master class: Divine lamp made from ventilation pipes.

Assembling a craft from pipes is not difficult if you have the necessary materials on hand. The main thing is to comply with safety standards and reliably insulate the wiring to prevent short circuits. It is important to find a suitable model in advance and select lamps of optimal power.

How to make a frameless lampshade from threads

It is quite possible to prepare a lampshade for a lamp or chandelier, even if there is no frame. The shape can be cylindrical, rectangular or round.

For a round product you need:

• Balloon;
• Cotton threads or twine;
• PVA glue with a brush;
• Scissors.

Step by step process:

• Inflate the ball to the required size and secure with thread.
• Cover the inflated surface generously with glue using a brush.
• Gradually wind the thread from the ball around the ball in different directions, leaving room for the light bulb socket. Lubricate with glue periodically. A ball of thread is formed. Repeat the adhesive coating on top.
• Leave for 1 day and wait for the product to dry completely.
• Pierce the ball and easily remove it from the thread structure. In this case, the shape should be preserved.
• Now you can try on the lampshade. Decorate as desired with beads, flowers, sequins.

Scope and features of concrete lamps

Artificial lighting is not just a way to make our lives more comfortable and safe. It plays an important role in the aesthetic perception of space, and therefore is actively used by designers when decorating interiors and various areas.

It is difficult to imagine that such a rough material as concrete can decorate a living room, bring a special style and even comfort to it. It is even more difficult to combine it with the task of decorative lighting. We will try to dispel your doubts.

Where are concrete lamps used?

The first thing that comes to mind is landscape design and industrial premises. This brutal material looks in its place there.

Indeed, lamps built into concrete are often used to design park paths, swimming pools, street staircases, and suburban areas. Here are just a few examples:

But recently, these original products have also found application in the interior design of residential buildings, offices and salons, decorated in styles such as loft, hi-tech, modern, minimalism and even country. It all depends on the shape, quality of concrete processing and its combination with other materials.

Moreover, they can be very different from built-in and hanging to wall and tabletop:

Pendant lamps usually have deliberately simple shapes. Due to their considerable weight, they are usually produced in the form of single pendants for one lamp, but there are exceptions.

Luminaires built into concrete walls can also be used inside buildings. But there is another type of them - wall sconces. They require a solid base for their installation, as they also have a decent weight.

For floor and table lamps, their large mass turns out to be a big plus: it gives them high stability. Therefore, any size and the most bizarre shapes are possible here. As well as combinations with other materials.

Principles for implementing a “loft” on a balcony

Strictly speaking, the implementation of a classic loft requires a fairly large space, which does not quite correspond to the idea of ​​​​standard apartments, and especially balconies and loggias. Often designers use only the main components of the “loft”, adding and diluting it with other style directions. This way even a small room can be given uniqueness.

1. Window. They should be large to ensure maximum access to sunlight and visually expand the balcony space. If possible, install panoramic windows. For frames, it is better to choose wood in brown tones rather than plastic.

1. Walls. A brick wall is an indispensable and characteristic feature of the loft style. To imitate it on the balcony, use decorative overlays or wallpaper. It is better to decorate only one wall of the balcony in this way. Paint the rest in light shades: beige, cream, gray. One of the walls or a small section of it can be painted in a bright color, which should harmonize and echo the shades of the furniture. Firstly, this technique is also a kind of zoning that the industrial style requires. Secondly, this way you can visually expand the space or adjust its proportions.

1. Floor. Concrete floors will add the necessary coldness and industrialism to the overall appearance of the balcony. To cover the floor, you can also use any other finishing materials - tiles, laminate, porcelain stoneware - like concrete, aged wood, natural stone. You need to take care of the underfloor heating system or install radiators.

1. Ceilings. The simplest solution is to leave the concrete covering. Plastic panels with its imitation are also widely used. A popular solution would be to use materials with the texture of unpainted boards. Massive floor beams will help add authenticity to the interior.

Furniture. A classic “loft” requires a minimum of upholstered furniture. But it should be bright colors and unusual shapes

Initially, this technique was used to divert attention from unfinished walls. Now it is an integral attribute of the interior

You shouldn’t clutter up an already small space. It is enough to choose original designer chairs, open bookcases and shelving for the balcony. Furniture should be a bright spot and immediately attract the eye

1. Accessories. Elements and attributes of industrial style must be present - pipes, open ventilation systems, or their imitation. Shelves of simple shape and design, made of metal and wood, are a stylish “loft” solution. If you have creativity and minimal practical skills, you can make them yourself from available materials, for example, from the remains of water pipes and other garage trash.

1. Textile. Historically, the use of bright textile materials was another way to give an industrial space a more or less residential look and disguise unsightly walls. But its quantity should be small. These are mainly sofa cushions, upholstery of upholstered furniture, blankets. They use fabrics of bright and rich colors (blue, green, orange, red), plain or with large patterns. Ordinary curtains, tulle, heavy classic curtains are unacceptable. Blinds or Roman shades are installed on the windows. A rough floor can be complemented with a bright carpet or mat.
2. Lighting. The right lamps will help create the right mood. For a “loft” on a balcony, soffits and lamps on rods, which are used to decorate photo studios and exhibition pavilions, as well as wall lamps in the shape of street lamps, are suitable.
3. Decor. The decorative elements of the loft style are very unusual things - flags, information signs, road signs, posters. Classic paintings are inappropriate in this case. It is permissible to complement the interior with black and white graphics, abstract images, and wall graffiti. The presence of fresh flowers greatly enlivens the austere interior.