Do-it-yourself clamps (20 photos): dimensions of carpentry clamps, diagrams and drawings, clamps for gluing furniture panels from a profile pipe and homemade clamps from timber

Do-it-yourself clamps: drawings, dimensions
Clamps are a compressive mechanical device that is used when working with wooden parts. They are used in the assembly process of furniture - armchairs, chairs, and also for gluing panel frames, frames and other wood products.

These types of devices ensure correct and precise connection of workpieces until the adhesive composition dries perfectly. At the moment, in retail outlets you can find a variety of options for such designs.

But it is very difficult to accurately choose the most ideal option for the job done. But at the same time, it is possible to make the wires yourself. They can be used in home workshops at any time.

What materials will be needed

To build a homemade clamp, you first need to collect the necessary materials and tools. To work you will need:

profile pipe, metal corner or channel;
fastening elements: nuts, screws, self-tapping screws;
stops;
building level and squares;
Bulgarian;
metal welding machine;
wooden spacers.

Do-it-yourself carpentry clamps must be strong and strong, otherwise, with great effort, you can bend or break the structure. To prevent this from happening, the stops must be resistant to heavy loads and be well fixed to the beam. It is necessary to make sure that they can easily move in the longitudinal direction. To be able to process large workpieces with your own hands, you need to fix the clamps on the clamps so that they can be moved.

Fastening elements must also have high strength. It is better to give preference to reinforced construction and nuts. Due to the high load, store materials quickly break down. In order for the carpentry clamps designed by yourself to be of high quality and effective, you should order fasteners and stops from a turning workshop.

Better quality fasteners and stops can be made using a lathe or ordered from a factory

Classification of shield wires

The capabilities of the installations are determined by the power of the power unit, the dimensions of the material being processed and the presence of functions that allow you to set the most efficient operating mode when using raw materials with specific characteristics. Each type of product corresponds to a device with design features. Weights for gluing furniture panels are divided into 3 categories according to the type of load created:

hydraulic;
pneumatic;
rotary.

The machines are available in horizontal and vertical versions, have different numbers of working sections and differ in pressing force. Devices with a vertical layout occupy a small area and are the best option for rooms with cramped conditions. Equipment with a hydraulic system is characterized by increased power and the ability to produce smooth and uniform pressure on the surface of the batch workpiece.

Steel profile wedge

Making a house for a cat with your own hands
But sometimes craftsmen assemble wires no worse than factory ones. Here's one option:

The clamping screw is first unscrewed until it stops. The slats are glued and placed on the clamp, starting from the clamping unit. After the array blank is assembled, it is covered with an upper profile pipe, and a mating unit is bolted into one of the pairs of holes (depending on the width of the future array).

By rotating the clamping bolt, the workpiece is compressed from the sides. The design of the clamp is made in such a way that the upper and lower pipes are also strongly pressed against each other when the screw is tightened, which makes the future workpiece perfectly flat. This kind of webbing, made with your own hands, allows you to make any product - from cutting boards to door panels.

Wooden fixtures never lose their relevance and never go out of fashion. They are highly environmentally friendly, natural, and can be used to construct almost any piece of furniture. They serve for a long time and lend themselves well to restoration. You can make stools, doors, steps from wood with your own hands. For production, the craftsman needs numerous tools that allow him to work with the material. These are carpentry weims. They are familiar to everyone, but their size is much larger.

Do-it-yourself clamps for gluing

Do-it-yourself weims: drawings, dimensions

Weights are a compressive mechanical device that is used when working with wooden parts. They are used in the assembly process of furniture - armchairs, chairs, and also for gluing panel frames, frames and other wood products.

But it is very difficult to accurately choose the most ideal option for the job done. But at the same time, it is possible to make the wires yourself. They can be used in home workshops at any time.

Workbench table top for carpentry work

We make a swing with our own hands from wood

Use sheets of MDF, chipboard or plywood 16–20 mm thick for the workbench cover. Glue the slabs in two layers and get a tabletop 32–40 mm thick.

Drawing and arrangement of the workbench cover: 1 – edge strips (birch, maple); 2 – working surface (hard fiberboard); 3 – load-bearing board (chipboard, plywood or MDF).

For the countertop, you can take sheets of chipboard left over from unnecessary furniture. For example, the walls of a wardrobe will do. Take them as a base and add small pieces so that the carpentry workbench lid measures 670x1940 mm.

Place narrow slabs toward the back wall and toward the center of the workbench. Place large sheets in the top layer of the countertop. Glue the cut pieces together.

Fasten the sheets with self-tapping screws, deepening them into the countersunk holes. Trim the edges with a hand-held circular saw 20mm from the edge.

Align the tabletop with the frame and secure with screws.

Sharpen slats for edge trims. Saw off the 45° bevels and cut the planks to length. Place a piece of fiberboard on the lid of the workbench, add a flat panel on top and secure it all with clamps.

This makes it easier to attach the pads. Align the ends with the edges of the tabletop and press the rail against the panel - the top plane will be flush with the workbench lid. Holding the bar with one hand, drill pilot holes and secure the parts with screws.

Move the device to the other side and install the remaining pads. Sand the slats with a sander.

Drill a hole in the corner of the slab so that the fiberboard can be easily pushed out of its recess when replacing it.

Clean the surfaces from dust and cover the wooden parts of the frame with stain. Place the fiberboard in the recess of the lid. If you are using pieces of material, secure them with double-sided tape. Place a carpenter's vice on your workbench.

Carpenter's clamp

We make our own cutting machine from a grinder with a broach

Such structures used in carpentry are of the following types:

Standard clamp, which is the most popular or simple;
In the form of a caliper for small parts and quick fixation;
Self-clamping clamp for milling processes and working with workpieces of various heights.

The first type is made from two pine blocks, a locking nut, rods, threaded wing nuts and thrust washers. The manufacturing process is very simple:

We cut out the working pliers from the bars, drill holes for the studs, taking into account a small amount of play;
We screw in the studs and lock them using appropriate methods;
We ensure alignment with nuts made either in the form of wings or standard nuts for improved tension.

There are both portable and stationary versions of this design, where grooves are cut for movement with the fastening of fixed stops. The clamp is a furniture nut, a hairpin and a knob. Due to this, you can work with workpieces of any size.

The self-clamping design has a lever with an eccentric at the rotating end. We turn it at a certain angle, a quick clamp is automatically obtained. The height is adjusted with a pin on the workbench. It is made individually for each matrix, depending on its purpose and the purpose of the work being carried out.

Simple homemade clamps - clamps for gluing carpentry panels

Despite the general disdain for "cabinet" furniture with its square-cavity design, making panels is a very common task in carpentry. In fact, trees of such thickness that you can cut out, say, a tabletop from them are not very common and there are not enough of them for everyone. Moreover, wide boards are often specially chopped into small pieces and re-glued. This greatly reduces the likelihood of their warping and cracking in their subsequent furniture incarnation.

What materials will be needed

To build a homemade clamp, you first need to collect the necessary materials and tools. To work you will need:

profile pipe, metal corner or channel;
fastening elements: nuts, screws, self-tapping screws;
stops;
building level and squares;
metal welding machine;
wooden spacers.

Materials and tools

rectangular profile pipe;
screws;
nuts;
stops;
wooden spacers;
welding machine;
Bulgarian;
building level;
squares.

The attachment of the stops to the beam must be strong and be able to quickly move in the longitudinal direction.

Furniture panels that must be clamped into the device can be of different widths. During work, it is not always possible to attach workpieces of different sizes with screws. Therefore, it is necessary to create the ability to move the clamps.

All screws must have the required strength. Nuts must be of reinforced design. They can be purchased at construction stores. You can order the production of these parts in a turning workshop. It is also necessary to order the turner to make stops for the screws of the required sizes.

If you buy ready-made screws, you will have to make a groove to install and secure the clamps.

A simple wema, assembled “on the knee”

Sometimes there are situations when some type of work needs to be done once. Suppose it is decided to arrange a table made of laminated spruce in the gazebo at the dacha. Does it make sense to buy expensive factory-made clamps? In such cases, a simple, in a sense disposable, wedge is made with your own hands. Drawings of the device are shown below.

In order to glue an array of blanks together once, you will need long self-tapping screws, a screwdriver, a hacksaw and a carpenter's hatchet.

The blanks are laid on a series of transverse beams (beams every 40...45 cm). On both sides of the workpiece, parallel to it, long longitudinal beams (equal in height to the workpiece) are laid and attached to the crossbars with self-tapping screws. On top, again, the upper transverse bars are fastened with self-tapping screws. That's all the vayma, made with your own hands.

To compress the workpiece, all that remains is, as shown in the diagram, to wedge it with specially planed wooden wedges. After the product is ready, the clamp can be disassembled and the material can be used at your discretion.

Features of making a simple wedge from self-tapping screws and timber

Sometimes a craftsman needs a large clamp to make one product. This does not require a permanent structure. You can make disposable weims with your own hands. To make the tool you will need:

wooden beam;
durable long self-tapping screws;
jigsaw or hacksaw;
screwdriver;
carpenter's axe.

To properly build a structure, you first need to make a drawing of it. The technology for making a simple wedge is as follows:

wooden elements are laid horizontally on a flat surface;
place the workpiece. The distance between elements is 40 cm;
on both sides of it, a long beam is placed strictly parallel, fixed to the crossbars using self-tapping screws;
to compress the workpiece, the clamp is wedged with special wedges;
As soon as the product sticks together, the clamp should be disassembled. Its elements can be further used for different purposes.

Do-it-yourself carpentry clamps are an excellent tool for making doors, steps, and window frames. Even if a person does not produce furniture, he can significantly reduce the cost of renovating his home.

Steel profile wedge

But sometimes craftsmen assemble wires no worse than factory ones. Here's one option:

Currently, the industry offers clamps or clamps of various designs. But they are too large in size and expensive. Therefore, you can make a clamp yourself for your home carpentry workshop.

How to choose?

A wide range of models of the described equipment, on the one hand, allows you to equip the workshop with the most suitable installations. At the same time, such diversity can confuse a potential buyer.

When choosing a wire, you should pay attention to the following important points:

Type of load and pressure generation. This refers to a choice of rotary, hydraulic and pneumatic devices. The latter option will be the optimal solution for small-scale production.
Specifications. We are talking about the dimensions of the installation, as well as the number of chambers and working cylinders.
Indicators of created pressure.

Stages of work execution

Start making a clamp with your own hands. It is necessary to prepare a profile pipe of rectangular cross-section with dimensions 60x30x3 mm. The length of the pipe should be 120 cm.

These dimensions for the load-bearing beam were chosen due to the fact that it is often necessary to glue large sheets of wood or make wooden doors. Therefore, the clamp must be of such dimensions that workpieces of such large dimensions can be secured in it.

Workpieces that are too large are rarely made. In most cases, furniture panels of small sizes and intermediate platforms for stairs will be produced. It is necessary to take measures in advance to ensure that when making the shield, glue does not get on the surface of the device.

In cases where the length of the clamp does not allow for a large workpiece, you need to glue such a shield in parts. First, workpieces of such width are glued together that they can be clamped in a clamp. Then a wide blank is assembled from narrow shields. For this purpose, movable clamps are used.

Then you need to make screws and nuts. The screw is made from a hexagon 300 mm long with a cross section of 28 mm. It must have a metric thread of 2 cm. The nut is made in the form of a 32 mm hexagon, 60 mm long.

Spacers 1 cm thick are placed under the nuts. Then welding is performed. After this, a clamp is made from a 5 cm metal rod.

It is not advisable to make a clamp with a smaller diameter. Otherwise, it will push through the wooden spacers that are placed between the workpiece and the clamp. If you do not use spacers, you can deform the workpiece.

You need to drill a 1 cm hole in the end of the screw on the clamp side. 2 ball bearings are installed in this hole to reduce friction.

Then the nuts are welded. It is necessary to ensure that the screw is parallel to the profile. Otherwise, the workpiece will be pressed through.

You need to completely tighten the screw and nut. Then a clamp is put on the groove. After this, gaskets are placed under it.

Using a level, make sure that the parts are positioned strictly parallel. The parts are secured and then welded.

Welding is performed with small seams to prevent deformation of the material when the metal is heated during welding.

Then clamps are made from a corner measuring 60x60 mm. Weld the corner to the profile. The profile is welded from two corners. They are adjusted so that there is the possibility of free movement and at the same time so that there are no large gaps.

Fasten the clamps. To do this, drill holes with a diameter of 12 mm. They put pins in them. Thanks to this, you can quickly change the position of furniture parts during production.

If during work the workpiece turns out during compression, then the reason for this may be the non-perpendicular position of the stop in relation to the supporting beam. Therefore, you need to check the correct location of the parts using squares and a building level.

Then a hole is drilled, a thread is made and a screw is screwed in. The correct position of the workpiece can be adjusted using a screw.

When drilling holes, take into account that the screw with a movable stop moves 200 mm. When attaching a fixed stop, the distance between the holes should be 150 mm. Otherwise, areas may appear where the workpiece will not fit.

First, a through hole is made on the clamp. After that, install it in its place and press it with a clamp. Then the profile of the supporting beam is drilled through this hole. This way you can accurately fasten parts together.

You can make a clamp in which you can press the shield to the supporting profile. This design is more reliable, but more difficult to manufacture.

This concludes the work on making a homemade clamp.

The design of the clamp allows for high-quality gluing of furniture panels of various sizes and thicknesses.

In this article you will find detailed instructions for making weima

with your own hands.

If you are engaged in the manufacture of furniture from, then you cannot do without carpentry clamps

. You don't have to buy it for this. You can make the glue for gluing yourself

How to make metal wires

A master class on creating a home clamp fits into several simple steps:

You need to prepare a metal base. The length of the base must be at least a meter. In some cases, a pipe bender may be required.

Next, the product is assembled with bolts. The parts of the future press will be convenient to weld. If the assembly is carried out on metal corners, the channel must be fixed at equal intervals from each other. The edge of the channel and the short corner must be placed between the long parts so that they are perpendicular to each other

It will be useful to insert spacers about a centimeter under the nuts.

Then it is important to process the connections with a welding machine. The joint between the channel and the angle does not need to be processed

If this is done, the resulting seam will create a lot of trouble in the process of gluing wooden panels. The clamps are made from an ordinary metal rod with a diameter of about five centimeters. A centimeter hole is drilled in the end, and ball bearings are installed inside.

The use of ball bearings will reduce friction and therefore increase the service life of the product.

The nuts also need to be welded. In this case, the screw must be positioned parallel to the metal profile. If you ignore this point, when clamping the part it will be pushed through.
To secure the clamps, you need to drill holes about a centimeter in diameter. And then insert pins into them, which will allow you to change the position of the workpiece while working with wooden materials.
Stops must be welded to the bottom of the resulting device, which will make it more stable and durable.

When creating convenient carpentry clamps for the workshop with your own hands, it is important to carefully ensure that the parts are placed strictly parallel. The building level will help with this

It is advisable to try to ensure that the metal is not distorted during welding.

A visual video will help you understand the nuances of the assembly.

Design Features

In the process of making wooden products with your own hands, joining parts is often required. This process will allow you to obtain parts of a sufficiently large width. Such products are much less susceptible to warping than those made from solid wood.

But it is very important to ensure even and reliable gluing. In this case, it is necessary to take into account a number of factors: the thickness of the workpieces, glue, orientation and number of layers

There are many different designs of wedges for assembling wooden products, gluing bars, etc. This carpentry equipment is used for various work in the DIY workshop. The choice depends on the characteristics of the materials, the work and the final goal.

Pneumatic clamps are machines that are used to press and clamp wooden products for gluing. The pressing force is compressed air. They are often used in the woodworking industry in the manufacture of wooden objects: furniture, etc. They can be used to glue structural parts under high pressure. This is how beams and panels, multilayer beams of the required sizes are produced. Such clamps consist of clamps and special sections for vertical bilateral fixation. They can be used for wood and hard and soft species.

Mechanical clamps can be lever, screw, cam, etc. They consist of a frame with stops, of which there can be two or four. The stops are driven by screws, for rotation of which there are handles or handwheels.

Special clamp designs

Having mastered the skills of making simple-shaped clamps, you can improve them and make devices for connecting complex parts.

There are homemade clamps made from a wooden hanger, which is sawn into pieces. They combine wood and steel and make more comfortable handles that allow you to quickly tighten the screw. This is especially important if you need to frequently change position or use several clamps at the same time. In the case of complex pieces, you can first cut them out of paper and then transfer them to plywood.

Although welded metal products are more reliable, wooden structures are also used not only for carpentry, but also for turning and carpentry. You don't need to have any special skills to create a clamp. You can make such a wooden product in unlimited quantities with your own hands. You just need to devote some time to the manufacturing process.

Features of the manufacture of clamping tools of different types

There are different types of clamps; they differ in design, material, and size. Let's look at the types of clamping tools and the nuances of their manufacture.

Quick-clamping

Pistol type clamp. When the trigger is pressed, the jaws move apart. By releasing the locking screw, you can change the gap between the jaws. The clamping force is small. You can make it yourself, but it is not economically profitable. It's a lot of work, but it's inexpensive.

But such a clamp with a cam clamp is very easy to make. And she holds it tightly.

G-shaped

G-shaped clamps differ from C-shaped ones only in the presence of a molded fixed jaw. This allows you to clamp parts more clearly and firmly.

End

The end clamp can be made using C-shaped technology. The only difference is that it has three clamping screws. Its dimensions are selected based on the dimensions of the future object of work.

When making such a clamp, it is necessary to accurately maintain the size of the holes of the sliding parts.

To make such a clamp, milling work is required to make a toothed notch on the rod.

Tape

Tape clamps are used for gluing frames, boxes, and caskets. The tape tightly covers the product and prevents it from falling apart prematurely. Manufacturing requires a good drawing and precise adherence to all dimensions.

Pipe

“Pipe” clamps are basically a thick pipe. They are used when gluing panels. The thickness and length of the pipe are determined by the size of the shield: its width, plus 10 cm for the length and diameter of the pipe (from half an inch to three-quarter).

Spring

This clamp creates a clamping force due to a spring. The amount of clearance between the “heel” of the bracket and the “heel” of the clamping screw is created precisely by the rotation of this very screw. First you need to set the solution, then pull back the movable part of the clamp, compress the spring, insert the part into place and release the spring.

Presses for gluing timber

More serious equipment for gluing wooden blanks is a press for gluing timber.

These units are used for cold gluing of boards in order to obtain lumber products of a given size. In width and length, they are widely used in the production of doors, windows and other glued building elements of various sections in furniture and carpentry enterprises of medium and large production.

Presses for gluing timber are a rigid metal frame structure on which pressure cylinders are installed. Optionally, front clamps with pneumatic or manual control, as well as a monitoring and control panel can be installed. The steel structure of the presses is made with a good margin of safety, which makes it possible to achieve a maximum specific pressing force of up to 14-16 kg/cm2, which is required when gluing hard wood.

When choosing a press for gluing timber, you need to take into account the following parameters: – maximum dimensions of the resulting workpiece; – type of pressing force (pneumatic or hydraulic).

Presses for gluing timber can be: – with 1 working zone; – with 2 working zones; – for the production of large-section building structures.

In general, these devices are distinguished by their robust design, maximum ease of use and high performance, which is why the demand for them is constantly increasing.

Market leaders: Hydraulic timber presses SL250-3G, SL250-6G, SL250-9G, SL250-12G. Price: 520,000 – 1,485,000 rubles.

Using Vime

In order for a wooden product to have a beautiful appearance, proper quality and meet its purpose, in the process of working on its manufacture it is necessary to strictly comply with all requirements. When connecting parts of a wooden structure, efforts are required so that there are no cracks or gaps at the joints and that they are positioned in relation to each other perfectly accurately when gluing.

Each master can make clamp clamps with his own hands, which will be useful to him in the workshop. With their help, you can make connections between parts of unusual, unique shapes, cover flat, volumetric and relief surfaces, design framed facades, stair steps, assemble furniture, panels, etc. with your own hands. They also splice wood and fix edges for cladding.

To glue or join bars in thickness and width, horizontal or vertical wedges are used, which can be single-story or multi-story. Fan and rotary types of weims are also used. Other varieties are used to assemble various frame furniture structures from bars, door and window blocks, including with your own hands.

Sometimes the work of professional craftsmen requires the use of stops and hydraulic cylinders. For these cases, single-sided or double-sided clamps, or devices with rotors with a horizontal axis of rotation can be used.

Making your own wires at home

Weights are a mechanical compression device that is used when working with wooden parts. They are used in the process of assembling furniture: chairs, armchairs, as well as gluing frames of panels, frames, etc. made of wood. These devices ensure precise and correct connection of the workpieces until the glue dries completely.

Currently, various versions of such designs can be found in retail establishments. However, it is not easy to accurately select the most suitable option for a particular job. But there is always the opportunity to make weims with your own hands. They will always find application in the home workshop.

What materials will be needed

To build a homemade clamp, you first need to collect the necessary materials and tools. To work you will need:

profile pipe, metal corner or channel;
fastening elements: nuts, screws, self-tapping screws;
stops;
building level and squares;
Bulgarian;
metal welding machine;
wooden spacers.

Better quality fasteners and stops can be made using a lathe or ordered from a factory

What do self-made weims consist of?

Making clamps on your own is not difficult. The base is made up of a very strong load-bearing beam. A pipe with a square or rectangular profile is also used. As an additional option, the base can be made from a metal corner or channel. Although the design in this case will be heavy, it will be of high quality.

The main parameter of the material used is a high degree of strength and good load resistance. Under no circumstances should Vaima change its original form.

Profile pipe

General information about profile pipes

The term “profile pipe” most often refers to a pipe having a cross-section other than round.

The most common profile pipes have the following cross-section:

Most often, the profile pipe is made from carbon or low-alloy steel (grades St3SP, 09G2S or similar). Stainless steel pipes are also available. Aluminum profile pipe can be placed in a separate category - the use of this material differs from the use of steel pipes.

Profile pipe production

Profile pipes are produced by hot or cold deformation of a round pipe blank.

From the workpiece (the so-called “strip”), a round welded pipe of the required diameter is made by bending and welding (determined by the calculation method).
The round pipe blank is fed into a forming machine, where it is deformed to the required shape and cross-section.
To relieve mechanical stress, the pipe (now we can talk about a profile pipe!) is subjected to heat treatment, followed by mandatory inspection of the weld.

Thanks to the formation of stiffening ribs on the pipe, products made from a profile pipe are quite strong - their metal frame can withstand loads many times greater than a frame made from a round pipe of a similar configuration.

A do-it-yourself clamp makes the craftsman’s work easier and saves him money

A clamp is a tool that allows you to fix a part during processing. Craftsmen often use various types of clamps in their work. Whether you are a carpenter or a metalworker, there is always a need to use it.

This device is available in different versions, from universal to specialized. Relatively recently, a new modification has appeared: a quick-release clamp. Develops compression force up to 450 kg.

The task for all types is common - to fix the workpieces for processing or connecting to each other.

Angle clamp

However, most often, an angle clamp is used as a jig for welding metal parts at right angles.

For production you will need:

steel corner 40 mm, thickness 3-4 mm;
steel plates 40-50 mm wide;
threaded studs, preferably hardened;
rods for gates;
nuts for the worm gear;
welding machine;
drill, taps.

We weld the corners to the steel plates at a strictly 90° angle.

We attach a worm structure to each side by welding. This is the same corner with a welded-on thrust nut or thickening, in which a thread is cut in accordance with the collar pin. The width of the working gap is selected according to the potential workpiece.

IMPORTANT! If the range of sizes of the parts being processed is too wide, it is better to make several clamps. Too much movement of the knob does not contribute to a strong fixation.

Do-it-yourself workbench - drawings, design principles

On the back side of the knob we drill a hole into which we insert a metal rod as a lever.

Carpentry clamp made from available materials

The simplest wooden clamp used in carpentry is made from the following materials:

Two pieces of wood and a soft but durable material. Pine will do. Wood that is too hard will leave marks on the workpiece when clamped tightly;
Furniture nuts with wood-look lock.
Steel studs, not necessarily expensive hardened steel.
The nuts are wing nuts with threads that match the studs.
Thrust washers, you can also use ordinary, inexpensive ones.

Working pliers are cut out of the bars. Holes for the studs are drilled in them strictly parallel, with a slight backlash.

ADVICE! If you make two sets of identical clamps, the scope of application will expand. Then you can use the device like a carpenter's vice.

Carpentry clamp made of wood and plywood

For quick fixation of small parts, a clamp made in the form of a caliper is used.

The device is made of bars and thin plywood. The worm system is familiar - furniture nuts and a pin-turn. The fixed stop is firmly attached to one end of the guide rail. Recesses are cut out on the rail itself to secure the moving mechanism.

Having moved the bracket to the required distance, all that remains is to turn the knob a few turns, and the part is fixed. After releasing the stop mechanism, the carriage moves easily, releasing the workpiece.

The stationary version of this clamp has a rail design. On two guides installed in parallel, grooves are cut at the same distance.

Homemade pipe bender, how to make it at home

The clamp is carried out in the usual way - a furniture nut, a hairpin, a knob.

Carpenter's clamp option 3

Sometimes it is necessary to simply press the workpiece against the table for processing. There is a self-clamping clamp for this purpose. The illustration shows how to make metal or wooden brackets.

You can attach two clamps of this type to a movable template for mass milling of identical workpieces.

This type of quick-release clamps is made individually for each matrix, or is rearranged onto a new substrate for cutting out the next shape.

Pipe clamp

Welding metal pipes end to end is a rather complex task, requiring precise orientation of the workpieces in space. If you weld a piece of pipe to a finished system fixed indoors, the task is simplified. And welding freely lying sections requires an assistant or a special device.

A clamp for welding pipes is easily made from a metal angle and steel plates.

We make weima with our own hands

Making wims with your own hands is much easier than it seems. The dimensions of carpentry weims, their diagrams and drawings have long been known. You just need to know how weaves are made for gluing furniture panels from a profile pipe and homemade weaves from timber.

In technology, so-called compression joints are widely used.

This is a whole group of manual and fixed (stationary) positioning devices that tighten and press down products connected by tenons.

Therefore, absolutely all amateur carpenters and joiners need to know how to make carpentry straps with their own hands. This task is not too difficult; it only requires attention and accuracy.

When working, focus on the dimensions of the device. It should be relatively convenient and not create unnecessary burden. Very heavy devices are impractical. But an extremely weak vayma is unlikely to justify itself. It is necessary for the press to work as efficiently as possible.

Large workpieces rarely have to be processed. Therefore, in most cases, devices are oriented towards the average size of products. But protection is always provided against glue getting into places where it should not normally be. The clamp diameter is calculated taking into account technical needs.

Recommendation: if the device is being made for a reputable workshop, it would not hurt to pay for a consultation with engineers.

To work you will need:

profile metal pipes;
special stops;
fasteners - not only self-tapping screws, but also screws and nuts;
angle grinder;
welding inverters (autogen can also be used, but it is less suitable);
gaskets between wooden parts;
spanners;
other tools for handling fasteners;
hydraulic level;
construction angles.

Let's look at the process of making weims from various materials with our own hands.

When using a professional pipe, you must first prepare the element. Its optimal length is 1.2 m. The structures can be assembled with bolts. But sometimes parts of the clamp are welded. Assembly on corners 2.5 m long is also possible; in this case, the channels are attached at equal distances (this is very important!).

The edge of one channel and the short corner are placed at right angles to each other in the gap separating the long fragments. The nuts are placed on spacers 10 mm thick. Welding the internal joint of the smaller angle with the channel is not necessary. Otherwise, even in the simplest products, the seam will create problems later during assembly.

The next step is to get the clamps. They take a steel rod with a cross section of 50 mm for them. Its end needs to be drilled, obtaining a hole 10 mm wide. A pair of ball bearings are mounted in this hole. Without them, the friction will be too great.

The next step in obtaining homemade clamps is welding the nut. Carefully ensure that the screw is at right angles to the profile. Violation of this rule threatens to push through the pressed parts. Next comes the preparation of the clamps. To obtain them, take a corner.

The clamps themselves will have to be firmly secured. For this purpose, it is necessary to drill holes with a cross-section of 12 mm. Pins are inserted into them. Then, thanks to the pins, changing the position of the workpiece will not be difficult. Stops are welded onto the lower segment, increasing the stability of the weims made from the profile pipe.

Recommendations:

monitor the parallel arrangement of all parts during the assembly process;
check the visual assessment at the building level;
minimize the size of welding seams;
ensure that the profile structures are not deformed during welding heat treatment.

Clamps for making carpentry panels can be made from a profile (from a pipe). To work you will need:

the actual pipes measuring 4x2.5 cm;
steel plate with a cross section of 2x0.5 cm;
threaded rod of M12 category (and the same extended nuts);
set of M10 bolts and nuts.

The number of clamps is determined by how large the panels are planned to be assembled. The number of holes is also determined taking into account your own needs.

Next you need to cut the housings for stops and for screw terminals. Workpieces 40 cm long are cut from a threaded rod.

A hole must be drilled in the body of each clamp, each stop; two nuts are installed, and the second of them is scalded.

A very important point is the size of the wedge for gluing furniture panels. They are selected individually each time. In their simplest form, gluing structures consist of a metal frame complemented by folding pressing elements. Moving stops are placed on one side. As a result, it becomes possible to adjust the gluing zone.

Many experts prefer to use multi-story assemblies. As a result, optimal load is ensured on all parts of the structure without reducing the free space.

Single-sided and double-sided wemes are often collected into powerful collections. Vertical positioning of such systems is typical for industrial equipment.

It can process very long workpieces, sometimes reaching 6 m.

Along with mechanical ones, pneumatic clamps are also quite widespread. Using such equipment you can produce:

When creating a machine, it is necessary to consider how to configure the vertical working area. To control the pressure, it is best to install ball valves. The membrane must develop a force of at least 1 ton.

The use of all-welded frames is recommended. It is worth ordering components from leading suppliers; The same requirement applies, of course, to all springs in wedges with a jack.

Joiner's weims can be made from wood yourself, and it's not even too difficult. It is necessary to carefully prepare drawings or be guided by designs made elsewhere.

The main component of the vima is the load-bearing beam.

It doesn’t matter whether the main part of the structure is made of solid wood or timber, in any case, the main support is made from the same profile pipe, angle or channel.

The latter option allows you to count on high quality construction. However, you will have to put up with the heaviness of such products.

A typical wiring diagram looks like this.

To work, you will need the same components mentioned above. It is recommended to use reinforced nuts and other fasteners.

The clamps can be used to work with both hard and soft wood. Such equipment is very light and therefore characterized by increased mobility. Mechanical structures are made according to:

screw;
lever;
cam circuits.

In different cases, 2 or 4 frame stops are used. But all of the above applies only to full-scale wires. By the way, disposable structures can be created from wood. In this case, the blanks will be strong timber and especially reliable self-tapping screws. The prepared workpiece and wooden parts are laid out on a flat area.

Two timbers are placed on each side of the workpiece. Carefully check the parallelism of all parts to each other. After screwing in the screws, the clamps are wedged. After complete gluing of the shield, the wedge is disassembled. For industrial use, this design is of little use, but in the domestic sector and in small workshops it is quite useful.

For more information on how to make your own wedges, see the following video.