DIY mini excavator, drawings, dimensions

Where to begin?

Of course, with visualization.
So that problems associated with the further operation of a mini excavator created by yourself do not bury your time and work forever, you must approach its creation with a clear understanding of what and how to do. After all, having bought a lot of spare parts, having spent countless amounts of time and effort, it is unlikely that anyone will want to eventually realize that their “craft” turned out to be more expensive than a production copy, but at the same time less effective. After weighing all the pros and cons, the first thing you need to arm yourself with is a drawing. You can either buy it on foreign websites, or spy on the Internet. If you search for the necessary information on foreign sites, remember that, for example, the American measurement system uses inches, not meters. Don't forget to convert some values to others!

Next, to all this you need to add your ingenuity, skillful hands and a set of necessary parts. But first things first.

Photo source: exkavator.ruMini excavator. Let's visualize

Do-it-yourself mini tractor from a walk-behind tractor

The desire to have a full-fledged “iron horse” on your farm is inherent in any farmer, with all their advantages, walk-behind tractors are not a full-fledged replacement for a tractor. It’s one thing to “run” across arable land behind a walk-behind tractor, and quite another to cultivate the soil while sitting behind the wheel of a mini tractor.

Getting to know mini tractors from a walk-behind tractor with your own hands

But the cost of a mini tractor is quite high. Therefore, the desire of many involved in agriculture to create their own mini tractor from everything that is available on the farm is understandable.

Today, the construction of tractors of your own design occurs in two ways: creating equipment from car parts or agricultural machinery or upgrading walk-behind tractors into mini tractors. The latter have already been called motor tractors.

Where everyone can talk about their experience of creating a mini tractor from a walk-behind tractor with their own hands. Here you can get acquainted with the drawings of a mini tractor from a walk-behind tractor with your own hands, discuss the most important technical details, or view a photo or video of a mini tractor with your own hands.

Today, motor tractors are presented in three categories:

completely homemade;
modernized walk-behind tractors to the level of a mini tractor using factory kits;
factory motor tractors made on the basis of walk-behind tractors.

DIY mini tractor

When converting walk-behind tractors into mini tractors, all sorts of parts and mechanisms available to the amateur designer are used. Often such models are made, as they say, “by eye”, without preliminary calculations. Despite the fact that DIY drawings of motorized tractors from a walk-behind tractor are available on the Internet, each master ends up with his own original model. The main disadvantage of such motorized tractors is the use of catch from equipment created to perform other tasks not related to agriculture. First of all, this concerns gearboxes that are removed from cars. And it’s not always possible to talk about the comfort of working on such a tractor. Nevertheless, those wishing to convert their walk-behind tractor into a mini tractor are only increasing.

In order to properly re-equip your car without violations, we recommend that you familiarize yourself with the list of documents that must be submitted to the traffic police.

Using factory

The demand for the modernization of walk-behind tractors has found a response both directly from their manufacturers and from companies with the production capabilities to create kits for converting walk-behind tractors.

The easiest way to bring your walk-behind tractor closer to the image of a tractor is to purchase an adapter - a two-wheeled cart with a driver’s seat, a powerful drawbar and a device for mounting towed equipment.

A complete kit, as a rule, includes a frame, footrests with pedals, a brake system, a steering column assembly, as well as a front beam with hubs and brake discs. The delivery also includes a rear linkage with a lift (usually manual), and at the customer’s request it can be equipped with an electric lift.

Having such a kit, you can assemble a mini tractor using a welding machine, plumbing tools and wrenches. You also need to worry about the wheels for the future “iron horse” - these can be wheels from a passenger car or similar ones from a walk-behind tractor.

Video of a mini tractor made from a walk-behind tractor with your own hands.

Simpler but more expensive

In order not to rack your brains over how to make a mini tractor from a walk-behind tractor with your own hands, you can purchase a ready-made motorcycle tractor produced by the manufacturer.

They are distinguished by a more advanced design than the first two options, as well as the presence of all the components necessary for agricultural machinery. The cost of such a device is lower than a mini tractor, but higher than making it yourself from a factory kit.

From general to specific

There are two most common methods for creating a mini excavator with your own hands: you can install attachments on a small tractor or build an autonomous homemade mini excavator that can move independently or with the help of other vehicles. The second option is more labor-intensive. You need to make your own frame, install at least the rear axle (can be used from an old car), and the engine. If you feel technically savvy, you can combine engine parts or use Chinese motors from different manufacturers. Just keep in mind that if you assemble parts from different machines, you will have to constantly adjust these parts and make modifications to them.

Photo source: exkavator.ru The main thing is to make a start

homemade trailed mini excavator

Good day. I want to assemble a trailed mini excavator with my own hands, but after searching the forums I haven’t found anything useful ((In particular, I’m interested in help in terms of “materials”

I want to assemble a trailed mini excavator with my own hands,

The guys made mounted ones. It makes no difference whether you hang it or screw it onto a cart.

There is a difference if there is no tractor

It might be cheaper to hire. and there is less hassle. manually is also quick. An excavator must move: how else can you work on it? We once had to make 2-meter holes for stepchildren at a transformer substation. You can't get in with the equipment. So 3 men dug these holes for us in a day. I couldn’t believe my eyes!

1) moving around the excavation site will be done manually (or using a bucket), transportation on a tow bar 2) I don’t want to hire and don’t want to waste my nerves. It’s better to do it myself. My construction site isn’t on fire. There’s bare earth on the site! There’s nothing yet! Imagine a foundation for a fence around 10-15 acres? + dig a trench for water + house foundation + sewerage + cesspool, etc. + garage foundation + place to work (I do auto repair) + unforeseen plans = ? 10000?20000??30000. I don't think. + his brother has another plot

One horse, two horse

What about “horses”? The question is reasonable, and the answer to it lies in the purposes and in the work that you will carry out on a mini excavator made by yourself. The calculation of the forces on the hydraulic cylinders for raising and lowering the boom and turning the handle depends on what exactly you are digging, then the speed of movement of the links and the movement of the pistons in the cylinders is determined. Typically, a power of 8-13 horses is more than enough.

Finding the necessary equipment or spare parts has become even easier - leave a request and they will call you back.

Hydraulics. Ours can do this too

In fact, American colleagues in the workshop prefer to install ready-made hydraulics. The option is not the cheapest, but requires the least labor. But our people are not looking for easy ways! Armed with theoretical knowledge, you can try to make hydraulics with your own hands. But we warn you: this process is quite complicated.

So, the hydraulic system of a full-fledged excavator consists of 4 sections (this is the minimum): a rotary platform, a bucket, a boom and a handle. As for the rotary platform, you can refuse it, since complex work, as a rule, is not performed on a homemade mini excavator. We install 4 hydraulic cylinders (this is quite enough to turn and raise the boom and handle, and control the bucket). Hydraulic cylinders from the MAZ or KAMAZ cab lifting mechanism are perfect.

Photo source: exkavator.ruAnd here is the basis of the machine

Do-it-yourself mini tractor from a walk-behind tractor

When choosing a conversion kit, you can take factory spare parts. But this is not suitable for those who need to break a 4x4 with significant savings.

For homemade tractors you should purchase:

set of tools and welding equipment;
channels, metal pipes;
drill with different drill bits;
hardware and other fasteners;
Bulgarian

To properly remake a walk-behind tractor, you need to prepare two additional wheels, a chair, a hitch, pedals, and a steering mechanism

It is important to choose the right walk-behind tractor, choosing rather powerful units. This will allow you to get a productive mini tractor that can perform all agricultural functions

Creating a Frame

When using two small frames, you get a special axle that is connected by hinges and can move. This allows the wheels to make better contact with the ground and not overweight when driving over uneven ground.

Transverse longitudinal-type spars need to be cut with a grinder and connected by welding or other fasteners.
Bolted connections are secured by welding the seams for higher reliability.
A mount for attachments is mounted to one end of the frame, and a tow bar for the trailer is welded.

Correct installation of the chassis

Once the attachment has been attached to the frame, an axle needs to be attached to both ends of the frame. The wheels that came with your walk-behind tractor are attached to the rear ones, but the front ones are fitted with wheels with deep tread, which can be bought or removed from an old car.

To create a high-quality chassis, you need to purchase a brake system with hubs, a steering wheel, a steering rod and column, and a gearbox.

Front wheel mounting steps:

Select a steel profile pipe that will be equal to the thickness of the tractor's front axle.
Wheel hubs are welded to the ends of this pipe.
The structure must be attached in the center of the front of the frame.
Secure the tie rods and align them with the gearbox.
Next, fix the gearbox on the frame.
Select the steering wheel, install it, and then the bar.
Adjust the steering column.

In some cases, the tractor suspension is equipped with a spring shock absorber, which makes working with equipment more comfortable.

To install and secure the rear axle, you will need bearings. Next, it is equipped with a pulley, with the help of which the rotating components of the structure are launched and act on its wheels.

Correct installation of the motor with hydraulics

As a rule, the motor should be located in the front of the frame, which will make the tractor more stable and maintain its balance.

Where the motor will be located, you need to install a fastening system, supplementing it with tension belts. Mount the belt drive, which is needed to drive the rear wheels

In this case, it is important to ensure that the transfer case belt is located in the same plane with the belt, which is located on the rear axle of the mini tractor. The belt drive should be covered with a protective cover. After this, a hydraulic lift is installed on the tractor, consisting of an oil tank and a pump, a distributor, and a hydraulic cylinder

The system is connected with hoses. After this, a seat, headlights and dimensions are installed on the equipment.

Electrical equipment and braking system

First you need to determine the location of the brake pedal, after which the mount for it and the main brake cylinder are mounted.
The brakes are then attached to the brake drums (located on the front wheels) using hoses.
The brake system must be checked for leaks, and the drawings must be reviewed to avoid errors during its installation.

An all-wheel drive tractor requires the installation of electrical equipment and sensors on the dashboard. A liquid cooling indicator, a fuel level and oil pressure sensor, and an ignition switch are required.

Additionally, you can install a canopy and casing, which will make working with the equipment more comfortable. You can watch the video on how to properly assemble a mini tractor.

Working equipment: ready-made or made?

The simplest option is to install a finished boom along with a hydraulic system. You can also install a boom on your homemade mini excavator, for example, from an old front-end loader. If, of course, you have access to it. In addition, it will need to be adapted for earthmoving purposes. Another “simpler” option is to make an arrow from a square pipe with your own hands.

Photo source: exkavator.ruArrow of a homemade mini excavator

Constructive decisions

A homemade manual excavator is configured in the same way as factory car models. This technique contains the following nodes:

A supporting frame mounted on tractor tracks or vehicle tracks.
ICE for driving hydraulics.
Rotating support part.
Hydraulics.
Ladle.
Arrow.

Choosing a bucket for an excavator

The optimal solution would be to install equipment on the T40 or create a similar trailer with your own hands to install a motor, tank, and wheelset on it. The stability of the machine will be ensured by additional shoe fastening: a pair of “shoes” will keep it from tipping over.

The motor can be an internal combustion engine with a power of 15 kW - a Japanese or even an inexpensive Chinese model.

Mini excavator components

The boom and hydraulic system can be purchased as a kit and simply installed on the base. Such a solution will eliminate many mistakes and search for spare parts. For the entire period of operation, you can forget about setting up the earthmoving machine. But such kits are expensive, and with the proper experience, home craftsmen prefer to make all the components with their own hands. Modernized components from old equipment can also be used.

Hydraulic system

In factory excavators, the hydraulic system consists of 4 parts:

slewing support;
arrow;
ladle;
control system.

When making an earthmoving machine with your own hands, you can resort to a simplified version. In this case, you will need a slewing ring and a boom. The column is mounted on a supporting structure, the role of which can be played by a walk-behind tractor. To make the units yourself, you need to have 4 hydraulic cylinders for moving the boom down and up, controlling the bucket, and turning. Old hydraulic cylinders from Soviet-made trucks will do.

Be sure to read: Excavators EO 3323 and EO 3323a

For hydraulic drive it is convenient to use an inexpensive gear pump. This is an easy to use and repair, budget solution. Most often, craftsmen choose NSh-10, combining it with the R-16A distributor.

If necessary, increasing the power of the equipment is achieved by simultaneously installing 2 pumps with 2 distribution units.

Technology at work

How to make a ladle

The working part of the machine is a bucket. This part is subjected to maximum loads, which is why increased demands are placed on the quality of the material. The optimal solution is sheet steel 6-9 mm thick.

Separate blanks are calculated according to the drawings and cut from a steel sheet, and securely welded together. To strengthen the sides and bottom, additional steel plates are used. The efficiency and productivity of the bucket will increase if durable “fangs” are welded on the front. The “fingers” of tracked vehicles can be used for them.

Usually, when creating homemade earth-moving equipment, a forward and a backhoe are used. But if necessary, a dragline can also be assembled - a technique designed for large pits, trenches, etc. It will be needed when working with a bucket below the platform on which a homemade excavator is installed.

This is interesting: Hitachi ZX 200 excavator. Technical characteristics, prices and design

Bucket: the stronger the better

The bucket is the direct component of the machine that will come into contact with the working surface. In order for your DIY mini excavator to serve you (let’s not guess how long!) it is recommended to use durable metal. The minimum set is: 2 sides and a bottom. The bottom, which is used as a rectangular plate, is attached to the vertically installed sidewalls by welding. Already tacked to the sidewalls at one edge, it is heated by a burner and gradually bends along the contour of the sidewalls. Don't forget to use pot holders. It is recommended to additionally reinforce the upper edge and bottom with steel plates. After all this has been done, you can weld the teeth.

Photo source: exkavator.ruBucket. Still toothless

Photo source: exkavator.ru And someone has already “cut” their teeth

We make a mini tractor from a Neva walk-behind tractor with our own hands

By making a mini tractor from a Neva walk-behind tractor with your own hands, you will minimize the cost of time and effort, which will result in the appearance of an excellent device for doing all the work on your garden plot. In addition to the adapter, you can purchase: a plow, hiller, harrow and other devices.

You can also upgrade a walk-behind tractor into a mini tractor with your own hands from unused parts of other equipment. This conversion option will take more time, but it will pay off with low costs.

To create a mini tractor from a Neva walk-behind tractor, you will need the following components: the walk-behind tractor itself, metal pipes, corners, sheets; two wheels; welding machine; driver's seat; set of tools.

Step-by-step process for upgrading a walk-behind tractor into a mini tractor

Step 1. We develop the design of the kinematic scheme. The main thing in this scheme is the balance of the structure so that additional loads do not destroy future equipment. This diagram is developed independently, or you can use a ready-made diagram with a kinematic image of a mini tractor. Step 2. We make a frame from angles and pipes

During the manufacture of the frame, it is important to consider the location of the fork and bushing, which ensure the rotation of the trailer. Step 3. Making the body

For the body, an excellent material for manufacturing would be steel sheet. The height of the sides of the body should not exceed 30 cm. Step 4. Install the driver's seat. Step 5. Install attachments. Step 6. We check the performance of the manufactured mini tractor. Step 7. Painting.

We will consider one of these options for creating a mini tractor using the example of the Neva MB-2s 7.0 PRO walk-behind tractor. This walk-behind tractor is equipped with a Subaru EX 21D engine. If you plow your garden plot with such a walk-behind tractor, then within a week it will be difficult to straighten up. To avoid such consequences, we will convert the walk-behind tractor into a mini tractor.

Since the SUBARU engine does not have a 12V output, the headlights are installed for decoration. To use them you need to install a battery pack or battery. When plowing the land, the imperfections and inconvenience of this technique are not noticed. This mini-tractor was tested on hard-to-plow land. And although during the creation of the tractor its traction characteristics were questioned, the tests were very successful.

Also, a big plus of this machine is that the driver and the front part of the mini tractor are additional weight, which helps the drive wheels to better grip the ground. Installed levers: gas lever - on the right, axle release lever - on the left. To lift the hitch, a sprocket with a diameter of 150 mm is used. It is brought out by a bicycle chain to a lever or a manual jack.

The installed Volga wheels were found in a landfill, pre-cleaned of rust and painted. The pedal arrangement is similar to that of a car: the right pedal is the brake, the left pedal is the clutch. Speeds are switched using a lever. Shoe brakes taken from the Riga-7 moped are installed.

The principle of operation of the clutch pedal is the same as that of a walk-behind tractor: when pressed, the minitractor moves, if you release it, it stops. There is a cable connected to the left armrest lever that unlocks the axles. It is used when turning is necessary. There are no special nuances when turning right or left. The right armrest houses the throttle lever. The hitch lift lever is located under the seat.

The wear on the drive belt on the gearbox is the same as on a walk-behind tractor. The sum of the weight of the driver and the front part of the tractor is 100-110 kg, which keeps the front of the mini tractor from lifting when the plow is deepened. The size of the processed track remains the same as the walk-behind tractor - 630 mm. Stability problems arise if plowing goes deeper than 20 cm.

Pump. It can be this way, or it can be that way

When installing a pump, you are guaranteed to ask yourself the question: axial piston or gear? Let's just say that the choice is yours. The first is more expensive, but also more effective. Of the gear types, NSh-10 has proven itself well. You can borrow the experience of Russian enterprises: two NSh-10 pumps and two R-16A distributors, which are connected in parallel. Based on the performance of the pump and hydraulics, the displacement of the fuel tank is selected.

Photo source: exkavator.ruGear pump NSh-10

Communities › Kulibin Club › Blog › HOMEMADE MINI TRACTOR LOADER /Project completed.

I posted it at my place, but forgot to place the tractor in the Kulibin Club community.

Hello everyone, the other day I posted an unpainted forklift, but now it is ready and will be sent to the customer today. The project was made for Pavel from Balashov. ATTENTION! Be kind and don’t ask about the price here, don’t ask in private. I don’t announce prices and don’t accept orders. The post is purely to encourage people who want to assemble a tractor for themselves. This loader has a regular bucket.

CHARACTERISTICS are the same as on previous loaders:

1. PERMANENT all-wheel drive. 4x4 2. Load capacity without counterweight is no more than 200 kg, with counterweight recommended no more than 250-300 kg. 3. Homemade steering knuckle, reinforced. 4.Boom lift 2.2 5.Weight approximately 500-550kg 6.Length 1.9 without boom and 2.4 with boom and 2.9 with bucket 7.Height 1.4 8.Width 94 cm 9.LIFAN motor 15hp, with starter + generator. 10. Frame and boom struts made of 12 channel, boom 10 channel. 11. Ladle, 3 metal. 12.NSh-10. 13. Distributor P-40, 3-section

And here's how it all happened:

Getting to the bottom of the philosophical grain

How your DIY mini excavator will dig is a rhetorical question. But, you see, assembled by you yourself, it will definitely have the right to claim even if not the title of a reliable assistant in the household, then certainly the subject of your, now unshakable, pride. So, go for it! And you can rejoice at the successes of others on numerous forums, both Russian-language and foreign.

Photo source: exkavator.ru Your work has every chance of becoming something similar

Photo source: exkavator.ru Or this. Far from the visualization object in the first photo, but still

In detail

Future!

Plan for making a homemade mini tractor from a Neva walk-behind tractor

The main difference between a mini tractor and a walk-behind tractor is that when performing any work, the driver sits comfortably on the seat. Therefore, when converting a Neva walk-behind tractor into a mini tractor, there are two options for completing the work:

purchase a ready-made module with a wheel pair that allows you to control mini-equipment while sitting;
Assemble the attachment with wheels yourself.

Let's consider this option in more detail, based on the simplest design without a drive to the second wheel pair and a full-fledged steering column.

Of course, you can design a device with a steering column and all-wheel drive, but this is more difficult to implement, and also requires many additional components and skills from the master assembling it, and does not provide any special advantages in the work. And in fact, only the motor remains from the walk-behind tractor.

To control the mini tractor, we use the rotation of the entire engine and transmission unit with a standard walk-behind tractor steering wheel, so we need a module that is attached to the unit on a hinge and has a seat, as well as a hitch for towed devices. Thus, it is like an extension of the walk-behind tractor, with trailed units attached to it.

This is the simplest and most cost-effective option. A frame with a wheel pair is assembled, on which a seat is installed, and two trailer units are mounted, for attaching to a walk-behind tractor and for connecting soil-cultivating or transport units.