Great tool box made from a plastic canister

One of the main attributes of an ice fishing enthusiast is a winter fisherman's box. This simple device creates comfortable conditions during fishing (serves as a seat, serves as storage for fish, protects the hole from the wind), and is also designed for convenient storage and carrying of gear.

Of course, it is easy to buy in many specialized stores, but industrially produced models cannot always satisfy the owner’s desires. Therefore, many fishermen make a box for winter fishing with their own hands. You can ask more experienced comrades about materials and manufacturing methods.

Overview of species

Today the range of boxes is quite wide. So, the following models are popular:

• with compartments for sandwiches, containers with tea and coffee;
• with small drawers for fishing tackle;
• with containers intended for bait, lures, baits;
• with a compartment in which the catch will be stored;
• with additional pockets for fishing rods.

Among fishermen who are keen on competing in their hobby, sports boxes are in great demand. Such models have a stylish design, most often weigh just over 2 kilograms, and are made of PVC.

Those who like to get to the fishing spot on foot like backpack boxes and bag boxes. The fishing accessory is placed in a container specially made for it, equipped with straps, and carried like a school backpack. The bag can be hung on the shoulder. This makes the unit easier to carry and extends its service life.

In addition, models of fishing boxes can be additionally equipped with skis. These skis will be a great help for fishermen who have to regularly drag all their equipment from place to place. Thanks to the skis, it will be easy to pull it through the snow.

Charabancs are made from different materials. Let's look at the features of each of them in more detail.

From foam

Foam boxes are incredibly popular. They are lightweight, but strong and wear-resistant. Such products serve as a kind of thermal bags, maintaining the internal temperature of the container for a long time. The fish will not spoil in them even if you are driving back from fishing in a hot car.

Foam units are also good because they are very comfortable. The models do not cool down in the cold, so it will be warm to sit on them. And the accessories are quite thick, and even if you try to damage them, they will not lose their original appearance. The only drawback is the price.

Made of metal

Aluminum metal boxes are durable and very wear-resistant units, popular since Soviet times. The models are easy to repair and easy to care for, and a fisherman who is used to working with his hands can even improve them by adding additional pockets, compartments and compartments.

However, along with undeniable advantages, there are also disadvantages. First of all, aluminum stainless steels are heavy. They will be difficult to transport on foot and move on ice. The second disadvantage is that such a box, of course, will be simply icy. To sit on it, you will have to additionally cover the lid with insulation. It is recommended to handle such a unit only with gloved hands.

Made of plastic

Such models are very budget-friendly and can be found in any fishing store. The main feature is the ability to use many additional accessories. For plastic containers you can choose pockets, various compartments for fish, food or bait, and gear.

The weak point of plastic models is their fragility. The material itself is quite fragile, over time it begins to wear out, which is why the latches on the drawer suffer. They constantly break down, and finding new ones takes time and money.

Speaking about manufacturing materials, one cannot fail to note the options for homemade containers, which fishermen often make at home. So, today the following solutions are known:

• from a bucket (metal or milk pan);
• from the freezer;
• from a gasoline can;
• from plywood;
• from the computer case.

Don't throw away your freezer

A fisherman can even adapt an old freezer for his purposes.

Of course, you don’t need an entire refrigerator, but a freezer is a useful thing for fishing if you use the right approach:

• leave the walls of the freezer in place;
• to make the bottom and partition you will need aluminum sheets;
• prepare a sheet of plywood for the lid;
• treat the plywood with a soft material that is resistant to moisture;
• ensure moisture resistance using silicone sealant;
• To make it comfortable to sit, lay foam rubber and secure leatherette on top.

You can enjoy the finished result. Simple, easy and convenient. Now summer fishing will give you maximum pleasure. However, you can improve the model somewhat and install sheet foam, the box will be all-season, and it will be convenient to use in the summer. It perfectly maintains low temperatures. To do this, use bottles of frozen water.

Summer fisherman's box from a canister

To make it yourself you will need:

• large and two small plastic canisters;
• two hinges for the box lid;
• aluminum corner;
• latches for fixing the lid in the closed position;
• rivets and screws.

We cut off the top part of a large canister, and an aluminum corner is attached to the cut along the perimeter with small bolts or rivets to increase the rigidity and strength of the structure. A plastic partition is made inside our fishing box.

The top cover, which also serves as a seat, is made of plastic or plywood, with a slight overlap over the edges of the box. The bottom and top of the lid are covered with a rubber bath mat. On one side, at the top of the product, two loops are attached, with which the lid is also fastened.

Pockets made from two small canisters are attached to the sides of the box, to which lids can also be attached

It is important to choose a wider and stronger belt for the box

Battery box

Another very interesting way to make your own summer fishing box. The key element that will be required for further work is the battery case. The manufacturer has already endowed its design with stiffening ribs, and thick-walled plastic is resistant to deformation.

Before starting work, it is recommended to exercise caution and carefully drain the electrolyte. Remove the lead, which can be used later to make convenient weights. Rinse both the plates themselves and the housing several times using soda. This will help eliminate all traces of electrolyte.

To increase the strength of the box, it is worth cutting off the internal partitions, leaving small vertical stiffeners. If desired, the internal cavity can not be changed. When trimming, it is necessary to carefully process the chamfers.

The battery cover should be secured on one side with hinges, and some kind of lock should be attached on the other to help keep it closed. This will make a very convenient and practical box for summer fishing.

Now you know much more about these useful boxes, their features and manufacturing methods. Which box to choose, homemade or factory made, is up to you to decide. In any case, try to think ahead and determine for yourself the key requirements for these useful products. A properly selected or properly manufactured fishing box will last for many years.

Fishing box designs

Boxes with two or three internal compartments separated from each other by partitions are known. Everyone can use the compartments differently. But the original idea of ​​the manufacturers was that models with two compartments would store catch and food for the fisherman, and models with three would also store gear.

Inside the compartments there may be separate sections for storing fishing equipment. The largest compartment of the box can store your catch.

Fishing boxes are designed for a load of 100 - 130 kg, i.e. can support the weight of a large sitting person. For ease of carrying on the shoulder there is a strap with adjustable length.

This is interesting: How to make gel candles

The procedure for assembling a box for ice fishing

The basis for a homemade design should be a correctly drawn up diagram. It is best to take a drawing of a factory box and adapt it to suit yourself. Additionally, the properties of the selected manufacturing material and the arrangement of elements inside the box are taken into account. The latter should be treated as professionally as possible, since ergonomics is the main condition for a design of this type.

The procedure for assembling a fishing box.

1. Frame blanks are made according to the drawings. The manufacture of internal partitions is not carried out.
2. Two opposite walls are attached to the base, and then the rest.
3. Internal partitions are cut according to actual dimensions and installed.
4. Treating seams with sealant.
5. Installation of heat-insulating material.
6. If the box is made of plywood, its surface must be painted to protect it from external factors.

It is recommended to purchase a factory-made carrying belt. It should be adjustable in length and have a convenient load compensator located in the middle part. The fish compartment should be as sealed as possible. This way you can ensure that there is no unpleasant odor.

After manufacturing, it is necessary to conduct tests that are as close as possible to real winter fishing conditions. The box is filled with equipment, the correct installation and the total weight of the structure are checked. It is advisable to leave the structure in the cold for a long time to check its reliability.

Drawing

If you are an engineer by profession, or at least remember a school or university course in engineering graphics and descriptive geometry, then making a drawing will not be difficult for you. If not, you will have a bit of a difficult time, although this is not a big problem.

The point of the drawing is to determine in advance exactly what dimensions each part/detail of the box should have, so that in the end they all smoothly and clearly come together into a single structure. Otherwise, there may be holes in the final product or, conversely, the box will turn out crooked and will not be durable. In general, if you want a good box, you need a good drawing.

There are three options for completing the drawing:

On the computer. If you know words like AutoCad, Compass or SolidWorks, you don't need to explain what to do. Just create a high-quality drawing and enjoy the beauty of the result of your work. For those who do not know, the above words are programs for engineering drawing, and they are so simple that a person who has never worked with them can master them in literally an hour. They are made in such a way that they can be understood purely intuitively.

On graph paper. In principle, you can even draw in a school notebook on squared paper, but you need to understand that in this case sufficient accuracy will not be ensured. Graph paper will allow you to calculate the length, height and width of parts down to a millimeter.

Sketch on paper

This method is suitable for those who do not pursue beauty and accuracy, for those for whom it is important not how good the box turns out, but simply that it turns out.

Requirements for a homemade box

It is not always possible to find a fishing box that will fully meet all the functional requirements and wishes of its owner, and here a home-made design will come to the rescue.

A homemade charabanc, in principle, like a purchased one, must include a number of requirements:

• Optimal size;
• Light weight;
• Several departments;
• A strong lid that will be used as a seat;
• Resistance to external influences and low temperatures;
• Convenient carrying strap.

Industrial boxes

They are made by many manufacturers, for example, Aquatech, Pontoon 21, Plano, A-Elita, etc. All of them are involved in fishing tackle, but only the US company Plano is seriously involved in fishing boxes.

For more than half a century, Plano has been a world leader in the manufacture of boxes for carrying and storing fishing tackle. The entire range of its product models meets international quality standards.

• The cheapest box is Plano 1140. It is made of lightweight and safe plastic. Its fittings are made of stainless brass. The box has two compartments, with the bottom one being deeper. There is also a removable container.
• One of the best boxes is Plano 1363. It is made of the same plastic. However, it is larger than the previous one and has three retractable (organizer-type) boxes made of transparent plastic in front, closed with a durable door, as well as a compartment under the top cover with a handle.

More expensive models of Plano boxes are distinguished by wide functionality, contain numerous pull-out plastic compartments for storing various fishing accessories, and are also distinguished by excellent design and ease of use.

Tool storage case

If tools need to be used occasionally, a lockable case is the best option. It is shaped like a wooden box with a handle and a simple lock. Dimensions depend on the number of tools needed.

The manufacturing stages are as follows:

• First you need to decide on the range of tools that will be placed in the box. Usually this is a set of necessary hand tools (pliers, screwdriver, hammer, hacksaw, etc.).
• Draw a sketch taking into account the size and compact arrangement of tools and other instrumental items.
• Calculate the required amount of material according to the sketch dimensions.
• Depending on the weight, choose the thickness of the box boards. If the weight is low, plywood is suitable as a material.
• Using a jigsaw or hacksaw, parts are cut out according to the dimensions of the sketch. When working with a jigsaw, do not apply much force in the direction of the cut. This will cause the file to bend and the cut will be uneven.
• Finished parts are processed with sandpaper or a grinding machine to remove roughness. The corners and edges of the boards are rounded.
• At the marking points, holes for screws are drilled.
• Assembly is carried out using self-tapping screws, screwed in with a screwdriver. This results in two main parts: the box itself and the lid. It is advisable to reinforce the corners of the box and lid from the inside with light aluminum corners. The structure will become much stronger.
• Inside the suitcase, you should provide partitions and simple mounts for tools so that the entire set does not turn into a heap when carrying the box. A wide Velcro tape will work well, with the help of which all the tools will be secured inside the suitcase. You can make latches to suit your taste in the drawer and on the lid.
• The lid and the drawer are connected with furniture hinges on self-tapping screws. You can make a handle yourself, but it is better to buy a ready-made one at a furniture store. It can become a decorative element of a suitcase.
• If you need to lock your suitcase, you can attach a small padlock. The best option would be hooks that prevent the box from accidentally opening while being carried.

How to make a tool box with your own hands and what tools and materials you will need for this.

To work at home you will need to have the following tools and equipment:

• Circular electric saw with a saw blade diameter of 200 mm.
• Hand saw-hacksaw for wood.
• Electric drill and set of wood drills. When using metal corners to strengthen the structure, several metal drills will be required.
• Screwdriver.
• Chisel.
• Ruler and tape measure.
• Boards no more than 25 mm thick. When made from thicker boards, the box will be very heavy. For the same reason, chipboard (chipboard) is not suitable for making a tool box.
• Plywood (multilayer, 9 mm thick) for making partitions and holders for tools located inside the box.
• Furniture hinges.
• Pen.
• Self-tapping screws for wood.
• Screwdriver.
• Velcro tape.
• Furniture stapler for attaching Velcro tape.
• Furniture varnish and brushes if the outer surfaces of the drawer are to be coated.

In addition to tools and fasteners, inside the suitcase, it is necessary to provide compartments for placing various fasteners and small parts. These are nails, self-tapping screws, screws and nuts, drills, taps, dies and other small devices. Such elements should not crumble inside the box, so the cells for them should be made closed. These can be lightweight plastic boxes with lids. Preferably made of transparent plastic so that the contents can be seen without opening the compartment. They need to be secured inside. You can simply screw it to the bottom or wall of the box.

If there is no need to carry it, then it is good to have a stationary, home box. It can be made big. Organize a real storage of tools, fixtures, fasteners and other things. It may take up significant space in the room, but all items will be in one place and nothing will get lost. The weight of such a tool chest should not exceed 30 kg. Otherwise, it will be difficult to move it around the apartment when changing the installation location. For such a heavy structure, it is necessary to provide special handles for moving the box indoors.

Features of selection and purpose

There are many areas of application for a fishing box. The main task is to store and transport all equipment to the fishing site: baits, baits, jigs, fishing rods and much more. It is also used as a catch storage point. Its design is such that it can serve as a comfortable seating area, eliminating the need to carry a stool with you. In search of a cool place, fishermen often go quite far, and every additional gram of luggage can always be unnecessary, so you need to take into account the weight of the box itself.

When choosing an option suitable for ice fishing, you also need to pay attention to the following properties:

Box volume. You need to put everything you need in it and leave room for the caught fish.

It is important to maintain a balance between the capacity and weight of the box. Practicality. In the cold it is not easy to remove a stuck accessory from the charabanc compartment. Strength

A fishing chest is subject to serious loads, given the weight of the fisherman in winter gear. Price. When purchasing a finished product, it is best to focus on a product in the mid-price category.

For those who prefer vertical lures, you don’t need a lot of gear: spoons, balancers, one or two fishing rods don’t take up much space. This is how they fish for perch or pike perch, covering a considerable distance when moving from one fishing point to another. This method of fishing involves getting up frequently to continue moving, so the box should be light, tall and small in size.

Having found a good place with frequent bites, jigs and floaters stay there for a long time. In addition to gear and other accessories, they have groundbait, different types of bait, a scoop for cleaning the hole and a tent that protects from the wind. Usually, a low rise with this method is more convenient, so the box should be voluminous and squat.

A capacious charabanc is needed by those who like to fish for predatory fish. The set consists of a dozen girders, a hook, a yawner, an extractor and various other equipment. Due to the length of the process, an extended supply of food and drinks is necessary. Fans of combined fishing need a box of medium height and dimensions.

Metal boxes are the most popular. This is especially true for duralumin products. They can withstand low temperatures, are strong and durable, and have an attractive appearance. However, this is the most expensive and rather heavy accessory.

In recent years, plastic boxes have gained a lot of fans. They attract buyers with their light weight and variety of colors, but cannot boast of strength and frost resistance.

The upper part of the seat must be covered with moisture-resistant soft materials. Manufacturers use foam rubber or polyurethane foam for this. The entire body must be covered with a thermal insulation coating.

Properly planning the interior space is no less important than choosing external characteristics. The presence of separate compartments for each type of accessories will allow you to quickly select the necessary gear

Fish stored in a separate compartment will not permeate sandwiches with its smell, and a thermos in a specially designated compartment will not be damaged by rolling around the box. A small window on the side will allow you to throw your catch inside without getting up.

An additional advantage will be convenient access for cleaning the fish compartment. The bottom surface of the lid should also not be empty. It can accommodate many compartments for all kinds of small items. If the gear is tightly packed and does not move chaotically when walking, then it will never get tangled.

Portable organizer for drills from a canister: an idea for a craftsman

A long quarantine is the right time to put things in order in the workshop. Often one doesn’t get around to it, but here is such an opportunity and a lot of time to realize it. You can not only put everything in its place, but also come up with various convenient stands, organizers and other storage devices. Moreover, for this purpose you can use the same rubbish that has accumulated in the workshop: the remains of pipes, used canisters, etc. We saw one such interesting and extremely convenient homemade product on the YouTube channel of the author Tanned Hands. He clearly showed how to make an organizer for drills from scrap materials. Moreover, this organizer is portable, which is very important. You can repeat this experience yourself and without much effort.

Read in the article

What you need to prepare to work on the organizer

So, what is the main problem with storing drill bits? It's simple - searching for the right tool in a common box takes a long time, so it would be very convenient if all the parts were arranged by size and diameter, and access to them would be quick and easy, without opening each box or unwinding the package.

In addition to the canister, you will need scraps of plastic water pipes, a piano loop, and a lock for the organizer. For tools, prepare a pipe saw or special scissors, a drill and a heat gun.

How to prepare a canister for an organizer

The canister is too tall for an organizer. To get an idea of ​​the height you need, measure the longest drill bit or screwdriver you have - this will be just the right height. Keep in mind: this height will consist of the lid and base of the organizer. So the central part of the canister will have to be cut out.

PHOTO: YouTube.com Then cut the top of the canister with the handle at a height of approximately 8-10 cm. In total, the height of the handle with the base should fit your tool

PHOTO: YouTube.com The piano loop should be cut so that it matches the width of the canister and fits freely inside it

PHOTO: YouTube.com To connect the lid and the main container of the canister together with a loop, you need to mark the fastening points and drill holes for the bolts. To prevent soft plastic from yielding under the pressure of the drill, place something hard under the side

PHOTO: YouTube.com Use small bolts and nuts to secure the loop to the canister, place the loop on the inside

PHOTO: YouTube.com Screw the lid to the hinge and check that the finished “suitcase” closes well and evenly

PHOTO: YouTube.com To secure the lid, the author made a homemade lock, but it takes a lot of time and requires a certain skill, so it’s easier to borrow a ready-made lock, for example, even from a handbag or an old suitcase. You can simply make a couple of hinges on the lid and base and bolt them together however you like

Now that the part from the canister is finished, you can begin the contents of the organizer.

How to make a honeycomb for drills

To make small compartments for drill bits in the organizer, use leftover plastic pipes.

PHOTO: YouTube.com Cut the pipes in three sizes: short, medium and long lengths of approximately 5, 10 and 15 cm

PHOTO: YouTube.com Now you need to assemble the “honeycomb” using hot glue to secure the tubes together. Start with the longest ones - lay them out in a row so that the width of this row fits into the canister case. Then place a second row of shorter tubes on them with glue, then a third

PHOTO: YouTube.com After the shortest row, start increasing the size again. You can arrange the tubes differently, from small to large or randomly, as you like

PHOTO: YouTube.com The finished honeycombs need to be placed in a plastic case, see how well they fit into this box

PHOTO: YouTube.com To prevent the honeycombs from falling out of the case if accidentally tipped over and to sit tightly in the canister, fill the voids around the edges with polyurethane foam. When it hardens, remove all excess

PHOTO: YouTube.com Now you can fill the organizer with the tool. Choose your own container for each drill. You can also store screwdrivers and socket wrenches here.

PHOTO: YouTube.com The organizer can be locked and easily taken with you to the construction site

Great and very simple idea, isn't it? And this is not the only drill organizer option. Here, for example, is another one for a small number of instruments in video performance:

Material

When choosing a box for winter fishing, the material from which it is made is of no small importance. It must withstand low temperatures, resist water and snow, and cope with the weight of the angler

1. Different types of metals are most common in the manufacture of boxes. They are resistant to impacts in frosty weather, durable, and have an aesthetic appearance. The disadvantages of such models include heavy weight and high cost. 2. Plastic boxes have recently become popular among winter fishermen. They are lightweight and come in many different colors. However, at low temperatures, plastic becomes brittle. The slightest impact on a hard object or ice may cause the box to break. 3. Plywood and wooden structures can only be used in dry weather. But after each fishing it should still be dried, since over time the remaining moisture will destroy even treated wood. 4

Particular attention should be paid to the seat trim. Many manufacturers prudently make it from soft, moisture-resistant materials using insulation.

Foam rubber, polystyrene foam and construction foam have good thermal insulation. Please note: when using foam rubber or foam to make the seat, you must use moisture-resistant materials. They completely cover the thermal insulation material, which prevents moisture absorption and increases service life.

An exclusive version of the box as a source of pride

You can buy an industrial-made charabanc. In any fishing store they are presented in a wide range.

But avid fishermen try not to make such purchases, considering it the lot of beginners. After all, a homemade fishing box for fishing assumes that it will take into account all the preferences and habits of the owner.

For example, the vertical or horizontal arrangement of the departments, the width of the lid that acts as a seat, and the material from which it is made.

Even such a moment as the height of the compartment for your favorite thermos should also be taken into account!

That is why among the many fishermen on the ice it is difficult to find someone with the same boxes. An exclusive version of the charabanc is a source of pride for every fisherman!

In addition

We did not describe how to make additional containers in the charabanc, cut a hole in the box for storing fish, or attach straps and latches. The homemaker must decide on this choice himself, based on the materials of manufacture and the available accessories.

In addition, we did not describe attaching skis or any runners to the caravan for transportation. There is no description of production and a story about how to make a cover for a foam or polystyrene box.

Go for it, and your charabanc will take its rightful place among the best fishing crafts!

DIY Tool Box | Useful transformation of a plastic canister

Most of you have probably encountered a problem when the right tool seemed to fall through the ground at the most inopportune moment.
And when you need several tools, you have to run after them every time. And why all? Because you don’t have a special box for storing and carrying the most popular tools. We suggest you make such an organizer from a simple plastic canister.

Content:

The best models

Balloons are indispensable for ice fishing, and many anglers strive to buy the best model. The top rating of trusted manufacturers that produce products of the best quality can help them in their choice.

Tramp TRA-152

A universal and high-quality box from a Chinese manufacturer. It can withstand 200 kg of weight, and the lid is covered with polyurethane foam, thanks to which it will be warm to sit on the unit. There is a set of skis that makes it easier to transport the product on snow and ice.

There are 2 compartments inside the model, and on the lid there are 4 additional containers for small items. The product is well protected from water, and also has a very low cost - approximately 1200 rubles. Buyers called the material not very durable as a disadvantage.

Helios 23 liters

A very minimalist galvanized iron box. Incredibly simple, accessible and cheap - 960 rubles. It will be an excellent purchase for tough and experienced professionals who are solely concerned with the quantity of their catch. The weight of the model is a little more than 2 kilograms, and it is also equipped with a convenient carrying strap. There are two sections inside. Unfortunately, such a model can only support weight up to 130 kilograms.

FishBox Helios 19 liters

Another Helios model from a Russian manufacturer. A very convenient product made of plastic in two colors, durable and modern. The maximum weight is 130 kg, there are pockets on the sides where you can put fishing rods and other gear, as well as some tools. The package includes a strap for easy carrying, as well as a comfortable seat. The price of the model is 840 rubles. The reviews are different: most people like the charabancs from this brand, especially since the price is extremely low. But there are also those who are dissatisfied with the quality of the plastic.

Artekno Repakki

The manufacturer of this model is Finland. The Finnish box Artekno Repakki is a real favorite of anglers. This model folds into a backpack and is equipped with straps, making it easy to carry. And the product weighs only one and a half kilograms. In the inner part there is a partition that can be easily removed if desired. The box is easy to clean and does not absorb fish odors. Can withstand up to 350 kilograms.

Rapala Icebox

Another Finnish fishing box with excellent characteristics. It has a large volume, but is light in weight and easy to transport. A distinctive feature is the presence of a built-in pull-out chair. The fabric of the product is dense, does not tear, and there are several pockets for fishing rods on the sides. The backpack box is absolutely waterproof and weighs 2 kilograms. The price may seem high - 2800 rubles, but the quality of the product fully justifies it.

Mikado UAF-002

This is a Polish model, the case is particularly durable. The weight is just over 2 kilograms, so with such a box you can easily move on the ice. The product has a strong bottom, which completely eliminates squeezing. Inside there are several compartments equipped with strong locks. The model has a durable and comfortable belt, as well as rubber pads that reduce slipping. This fishing box costs approximately 6,500 rubles.

A-Elita Sputnik Silver

One of the best fishing boxes from a Russian manufacturer. The plastic frame is reinforced with polypropylene foam, so the model is lightweight and durable at the same time. There is a hinged pocket, as well as a compartment for the caught catch, equipped with a window. The model is very frost-resistant, and its bottom is corrugated, well resistant to excessive slipping. There are removable boxes for tackle, as well as for a thermos. The price of the product starts from 4100 rubles. The disadvantage is the ability to withstand only up to 100 kg of weight.

"Pathfinder 30 liters"

Good and high quality Russian model. The capacity, as the name suggests, is 30 liters, which is quite a lot for fishing boxes. Made of frost-resistant polypropylene, weight is almost 2.4 kg. There is one compartment inside, but the lid has additional containers. The box is equipped with a strong strap for easy carrying and can withstand weight up to 100 kilograms. Costs from 950 rubles. There are two drawbacks - low load-bearing capacity and a not very convenient lid, which quickly becomes unusable if not used carefully.

Salmo 2075

This Polish model is considered one of the best, it is bought very often. The box is made of durable plastic and has 2 tiers. The model is very well thought out, it is pleasant and comfortable to sit on. There is a pull-out shelf-table. The lid contains 4 separate boxes for tackle, and the container itself contains 2 large compartments. A convenient carrying strap is included. There are some shortcomings, but they are extremely insignificant to refuse the purchase. For example, sometimes a belt gets stuck or a pocket opens in deep snow.

Ice fishing box

An ice fishing box, what should it be?

This question cannot be answered unambiguously, because... Different people have different ideas of the ideal fishing box. But everyone will probably agree that a fishing box in winter should be:

• light,
• durable,
• compact but roomy
• frost-resistant,
• waterproof and, most importantly, convenient in the context of ice fishing.

In addition, a box for free fishing and a box for sport fishing are two completely different things.

If the first one can be as sophisticated and functional as possible for leisurely, quiet fishing, then in competition conditions, the fishing box should be as simple as possible for quickly and secretly folding the caught fish, and free access to backup gear. However, in most cases, sports fishermen do not use boxes, but folding chairs with a hanging backpack for their catch.

Of course, an important factor when choosing a box is the price, which at the moment can range from several hundred rubles to several thousand, reaching a difference of an order of magnitude.

Materials for making a fishing box can be wood, plywood, light alloy tubes, duralumin, various plastics and dense foam.

Diagram of a homemade box for winter fishing

A homemade fishing box is certainly good, but not everyone has the time and desire to do it, not to mention the skills. Therefore, let’s determine what the price differs so much from.

https://youtube.com/watch?v=PSiabbDb4PI

First of all, the price of finished products depends on the material of manufacture, the complexity of the design and the presence/absence of such options as ergonomic seating, an additional bag-backpack for carrying the box itself with its own compartments for various accessories or provisions. A comfortable, soft and non-slip seat is a very important element of an ice fishing box, because you have to sit on it for a very long time.

• The best materials for fishing boxes are modern foam plastics and polypropylenes. Foamed rubber-like polypropylene is very durable and lightweight, pleasant to the touch, withstands heavy loads and retains heat. Boxes made of dense foam plastic are less durable, but lighter than polypropylene, and even more so metal boxes.
• The price for foam boxes, all other things being equal, is two times lower than for boxes made of foamed polypropylene and averages 1,600 rubles, and the range can vary from 600 to 4,600 rubles.
• Boxes made of durable, frost-resistant and impact-resistant plastic cost about the same, which is still in many ways inferior to foamed polypropylene, the most expensive material.
• The price of EPP polypropylene boxes can reach 7-8 thousand rubles.
• An alternative to plastic boxes can be metal boxes made of aluminum or stainless steel. Boxes made of wood (plywood) are also still produced and sold, but we consider them obsolete and inferior in all respects to boxes made of plastic and metal.

It should be remembered that not all plastics have the properties necessary for boxes for winter fishing (frost resistance, impact resistance), and you need to pay special attention to this when purchasing equipment

What should the box be like?

Each angler has his own requirements for the box. Here, a lot depends on the method of fishing, as well as on the number and volume of things that will be taken for fishing. And in order for all the necessary equipment to remain safe and sound, the internal space must have various compartments and partitions. • Supporters of sheer trolling need a small box volume. As for gear, it is enough to have a couple of fishing rods and a set of spinners and balancers. And since when searching for pike perch or pike perch, the angler has to travel long distances, the total weight should be minimal. In addition, for lovers of spinners, tall models are preferable, from which it is more convenient to rise in order to continue moving across the pond. • Fans of float and jig fishing linger for a long time on catchy holes. The jig fisherman should have with him not only tackle and spare accessories, but also groundbait, bait, a slotted spoon, and a tent. Accordingly, the volume of the box is required to be large. It is more convenient to wire the jig or monitor the float while sitting on low models with a wide seat. • Fans of catching predators with girders put a dozen girders, a hook, a yawner, an extractor, etc. in a box. And since the girders are often installed for the whole day, the supply of food and hot drinks in the box increases significantly. Many fishermen, while waiting for a bite from a girdle, while away the time with a float rod or try to seduce a predator with a spoon. Such fishermen will need a spacious and roomy box. For those who like to combine different fishing methods, a medium-sized and high-height model is suitable. It will be convenient for both walking and static fishing.

Fishing tackle box

Why do you need a fishing box? Most often it is used in winter, but it is also useful in summer. It’s so convenient to put everything you need in it. You can sit on the boxes. It is not at all necessary to purchase it in the store. For this, improvised materials that can be found in almost any home are quite suitable. There are certain requirements for boxes that need to be taken into account during the manufacturing process. Having completed all the necessary manipulations, you will have at your disposal a device that will always help out when you get ready to go fishing.

DIY winter fishing box

TOP popular products for fishing

– buy with good discounts for personal use and as a gift to friends and acquaintances.

Buy quality products at affordable prices in the best fishing online stores

. Give gifts to yourself and your loved ones!

Winter fishing requires a convenient and spacious box. Fishing rods, boxes with lures and baits, a thermos with a hot drink, fish, a hook and other fishing accessories are placed in it.

You can make a good fishing box with your own hands. In this article we will consider in detail the process of its manufacture. We will indicate what materials and tools will be required for such work.

Step-by-step process for making a winter box with photos

How to make a box with your own hands? We will make it from wood with dimensions of 45x39x23 cm. It will be closed with a lid-box with compartments inside. On top of the lid we will attach a seat made of a special filler, which we will cover with soft leatherette. We will make the walls of the box from seven-layer plywood. We will fill the planks on each side, and on the sides there will be timber measuring 6 cm wide for reinforcement.

The result should be a box like this.

Let's pay attention to the locks. They can be purchased in specialized stores

We will fasten the locks with strong screws, as shown in the photo.

The lid opens thanks to the following hinges:

We will fasten these hinges with screws. They will allow the lid to open completely. We will nail oak runners to the bottom of the box.

We will make the runners from timber with dimensions of 20x20 cm. We will fasten them with screws. The runners will allow you to drag the box across the ice. This is very convenient in cases where you have to travel long distances. Another plus about them is that the bottom will not come into contact with snow and ice. Oak slats are very hard and do not absorb practically moisture, hold their shape well and do not rot.

The inside of the box looks like this:

We see that there are metal grooves attached to the sides. We fasten them with thin self-tapping screws. You can insert plywood into these grooves, and thus get partitions. It is very comfortable. We will get three branches.

In one you can place fish, boxes of bait and groundbait, and in the second - boxes of bait, a thermos and other accessories. The small one can accommodate fishing rods.

This is the internal configuration of a hand-made box:

We will make a hole on one of the sides through which we will throw the fish.

We will use a belt like this:

We tighten this element with three screws or self-tapping screws.

We attach 10 mm thick polyethylene foam insulation to the lid using waterproof glue. It does not allow moisture to pass through and is quite soft.

We cover the top of the insulation with dermantin:

We will make the dermantine coating in this way:

This cover can be stapled to the sides of the box using a nail gun. The result is a reliable design.

We coat the resulting fishing box with our own hands with waterproof varnish in two layers. You can use parquet varnish. We make sure that all elements and sidewalls are carefully coated.

When opened, the box looks like this:

We will make the lid in the form of a box 6 cm high. Additional compartments can be made inside it. To do this, we will also make grooves into which the plywood is inserted. We fasten the plywood on top so that we get sashes.

We attach special clamps on the sides, and screw the handles on top with self-tapping screws. The result will be approximately the same design as in the bedside tables. To open the sash, you need to pull the handle.

In these compartments you can store elements of fishing equipment.

As you can see, we have a completely functional and spacious box. Now we know how to make a fishing box for winter fishing with our own hands.

Conclusion about the winter fishing box

This box will serve you for more than one season. An inspection is required at the end of each season. If necessary, the box should be re-varnished. Such actions will significantly prolong his life.

Good fishing online stores

will allow you to purchase any
fishing goods
at competitive prices!

Popular sections of the site:

The fisherman's calendar will allow you to understand how all the fish bite depending on the time of year and month.

The fishing gear page will tell you about many popular gear and devices for fishing.

Fishing baits – we describe in detail live, plant, artificial and unusual ones.

In the bait article you will get acquainted with the main types, as well as tactics for using them.

Cool tool box made from an old canister

If you have an old, unnecessary, metal canister lying around, then you can use it to make a super cool box for carrying or storing tools. Almost a collector's item that you wouldn't even be ashamed to give as a gift. And when your friends see this, they will definitely envy you.

Making a tool box from a canister

If the canister was previously used to transport petroleum products, fill it with water and rinse thoroughly.

Now we mark the cutting line. Scratch a straight line along the entire perimeter with a core.

Using a grinder, cut straight along the line.

We clean sharp edges from burrs. Next, take the base and apply it to the chipboard sheet. We trace with a pencil.

Cut two pieces roughly. Then, using a jigsaw, we bring the parts of the inner box to fit the curves of the canister. Then we clean the edges with fine sandpaper.

We wrap the edge of the canister with a rubberized pad.

From the same chipboard we cut out two rectangles to match the height of the inner drawer.

We make three small drawers that will be inserted inside the large one. Glue it with wood glue.

We nail the bottom with a furniture stapler.

Place it in a large box.

We make partitions from thin plywood.

Drill a hole in the center and install a ring nut. We will use it to pull out the box from the base of the canister.

Holes are also made on top for installing the tool itself. On the sides, in the upper part, chipboard elements are glued under the tool that is planned to be stored. Everything is individual.

The upper part of the canister is connected to the base using a loop.

A latch lock is screwed into the opposite side, which opens the canister and prevents it from opening when closed.

Now everything is ready. We fill small drawers with the necessary things.

Next we put it all in a canister.

We close it and take it wherever we want.

In such a case, the instrument will be in its place even with strong vibration. So you can make one specifically for a car.

Watch the video

Work plan

Before starting assembly, you need to think everything through. In order not to forget anything, it is better to make a drawing of the future box. Not everyone was friendly with drawing and geometry at school, and that may have been a long time ago. However, here you will need the simplest option. The main thing is to note the main things for yourself:

• Exact dimensions,
• Shape,
• Some details are in more detail.

To implement the scheme, you can use any convenient option. Common ones include:

1. A drawing made on a computer. You can do it yourself or contact a “specialist”. It would be quite suitable, for example, for a child of primary school age. They now have excellent command of technology, and the task is not difficult. Another way is to install one of the special programs, which will do almost everything itself. All that remains is to print it out.
2. If “your hands still remember,” you can make a drawing yourself on graph paper. You will get a high-quality, accurate and beautiful diagram, but you need drawing skills.
3. Probably the simplest and most practical option is a regular diagram sketched on a squared piece of notebook paper. The dimensions and outlines are there, but the rest is optional.

Top 10 DIY canister crafts for the garage and garden ✨

Crafts made from canisters are not just about country washbasins. We have collected the best ideas for recycling them for you. Organizers, flowerpots, tool boxes, unusual decor, toys... This is just a part of what you can make from plastic canisters with your own hands. So if you have run out of air conditioner, anti-freeze, motor oil or something else, do not rush to get rid of the container.

Preparation of material

Wash the canister with a thick soap solution. If there was oil in it, fill it with soapy alkaline water (based on Soviet household water - that’s it) and leave it overnight.

As for painting: we recommend choosing acrylic. For durable containers with thick walls, you can use enamel. Aerosol paints are suitable for creating patterns and decorating your canister crafts.

Garage shelves

If you have accumulated quite a lot of identical plastic canisters, you can use them to make a convenient storage system with shelves. Empty it looks rustic, but if you fill it with various little things, it will turn out well.

• strong thread;
• sharp knife;
• hot glue (optional);
• sandpaper.

Draw a hole on the side of the canister for cutting. Don't remove too much plastic or things will fall off the shelves. But don’t make them too small either - it will be inconvenient. Get rid of excess using a sharp knife and scissors, sand the edges with sandpaper.

Start tying the canisters together with twine. It is more convenient to assemble them first in twos, and then fasten them together with such structures. For more reliable fixation, you can use hot glue (apply a thin strip to the side edges).

Assemble a convenient structure of 1, 2 or 3 floors - whatever suits you. A homemade shelf made from plastic canisters can be used for garage or garden tools. It’s also very convenient to store country shoes or toys in it (if you have a lot of children, take note of this master class).

Small items basket

Crafts made from plastic canisters are appropriate not only in the country house or in the garage - they will look great even in a city apartment. Here's an idea: make a beautiful portable organizer for small things: toys, clothespins, your craft materials, and so on.

• ice cream sticks;
• twine (0.5 meters);
• natural fabric;
• cardboard;
• paper tape;
• paints;
• glue gun

If you're not the popsicle type, head to the craft section. There you will find a set of flat wooden craft sticks. Someday they will be useful to you for other crafts.

Making from wood

When choosing a material for making a product, craftsmen usually give preference to wood, which is easy to work with.

Let's look at how to make such a design step by step:

• Before starting work, you need to sketch a detailed drawing of the planned homemade product;
• Then prepare the base from the frame. It is best to use glue and nails. Due to this, the structure will be stronger;
• The boards will need to be lubricated with a glue solution and then knocked down. In this case, the nails will become a “press”;
• Next you need to attach a lid, which can be hinged or completely detachable. The structure should be sealed. To ensure that the lid holds tightly and is attracted to the frame, you should install a latch. As for the castle, it can be anything;
• The inside of the lid must be beaten off with a woven piece. In order for the box to be used as a seat, its outer side must be covered with woven upholstery. The material you need to use is something dense, for example, leather combined with insulation;
• Then the inside of the box is supposed to be divided into several compartments. The size of the sections is decided by the fisherman himself;
• The inside and outside of the product must be treated several times with water-repellent varnish so that it does not deteriorate under the influence of moisture and does not absorb unnecessary odors. When choosing a varnish, you should take into account that it is free of pungent odors.

“Box for winter fishing made of wood”