How to make an original stand from a plastic card, paper clip or any other material at hand + useful tips and ready-made options for implementation

Home House and cottage Do it yourself

The stand is a useful and convenient thing in everyday life. For example, phones or tablets, which have become an integral part of our daily lives, are a little inconvenient to use in a hospital setting. If you do not have a branded or suitable case that can secure the gadget in an inclined position, then you will have to hold it with your hands. This is inconvenient when watching a movie for a long time, while eating or reading for a long time.

The best solution to this problem may be to purchase a stand specifically designed for this purpose. But sometimes we need it right now, or we simply feel sorry for the money for a seemingly temporary thing. In this case, you can make a stand yourself from available materials. It does not take a lot of time! A couple of minutes and you can comfortably sit in front of the screen of your gadget, while freeing your hands.

In this article we will rely primarily on options for phone stands, but they can also be slightly modernized and used for tablets, books, even for pictures or plates. It all depends only on your imagination. But if she is sleeping, then there is nothing wrong with it. The options proposed in the article are discussed in detail, and it will not be difficult for you to slightly increase the dimensions specifically for the thing for which you are making a stand.

Handy materials to help

You can make a stand yourself from scrap materials. Almost any material you have at home is suitable for this. It could be:

  • wire
  • cardboard
  • cardboard box
  • fabric and padding
  • bottle
  • tree
  • paper
  • pencils
  • constructor
  • stationery holders
  • unnecessary plastic cards
  • old cassette player

Only your imagination can limit your choice. Of course, the stores offer a huge selection of products in this category. However, making the holder yourself has a number of undeniable advantages:

  • Rapidity. Sometimes you need a stand as soon as possible, and there is no time to go to the store to buy it.
  • Inexpensive or free. You can make a holder from what you already have in your home.
  • Originality. With your own hands you will create a truly unique product.

How to avoid these inconveniences at home or at work

A modern gadget has many functions besides telephone communication. Plus a dozen more necessary digital things: graphic editing, the Internet, a notebook or pocket computer (organizer), TV and music player and more.

A lot of time is spent searching for a charger and headphones. And at least at home they should be next to the mobile phone on the same stand.

Below are clear instructions on how to make a stand with your own hands.

Use your imagination and select materials. If you don’t want to purchase neat and expensive factory-made coasters.

Phone stand made from pencils

In order to assemble this structure, you will need:

  • 6 pencils
  • 4 rubber bands

Despite the intricate appearance, this design is very easy to assemble. The idea is that two pencils are held together at the ends with an elastic band, and the third pencil is inserted between the turns of the rubber band. The result is a geometric figure - a tetrahedron. If you still have questions about how to make this version of the stand, then use the example below.

The picture clearly shows how the pencils are held together.

To avoid slipping and make the stand more stable, use pencils with erasers at the ends.

Arrangement in a home greenhouse

Briefly about how to make a flower stand.

First, decide where the stand will be located: on a windowsill, on the wall of a balcony, just on a tripod in the courtyard of a country house or cottage.

Then decide on the materials: metal rods - they require welding, a little simpler - a wooden frame stand mounted on some wall. Next, watch the video to see how it’s easier to do.

Cardboard phone or tablet stand

Cardboard is an excellent material that is widely used for various homemade “things”. Probably, many people have a cardboard box or an unnecessary sheet of cardboard at home. It’s worth trying to use it to create a stand.

To do this you will need:

  • cardboard
  • scissors

From a sheet of cardboard folded in half, cut a strip measuring 10 by 10 cm. Then draw the figure shown in the figure on it and cut it along the contour.

You will get a comfortable and stable stand that you can carry with you.

This holder option can be used for a tablet or book. The essence of manufacturing is the same, you just need to adjust the part to the size of your gadget, as shown in the figure.

It is necessary to use cardboard that bends well so that the stand does not “open up”.

It is important to understand that a cardboard stand is not necessarily a sloppy brown structure. It can be stylish, comfortable and beautiful. You just need to change the shape a little and the result will change dramatically.

Frame of branches

You can create a wonderful eco-style photo frame if you use thin twigs and twigs to make it. It is noteworthy that the material is easy to collect simply by leaving the house. Also prepare cardboard for the base, a glue gun, varnish and additional decor in the form of flowers, beads, cones or ribbons.

Form a rectangular blank from dark-colored cardboard or paint it (the main thing is that it does not remain white). Dry twigs need to be lightly peeled, freed from excess bark, and cut to the same length to fit the sides of the frame.

Now you can start gluing the twigs, slightly intertwining their ends in the corners. Finally, glue on the decorative ornaments and varnish the craft.

Photo: stroychik.ru


Photo: vse-otoplenie.ru Photo: et.diy-site.com

Wire stand for phone or tablet

One of the budget options, made from scrap materials.

During work you will need:

  • wire 2-3 mm thick
  • pliers
  • wire cutters to cut wire

Everything is done as simply as possible: in the right places the wire is bent so that it becomes a holder.

To make the structure more stable, the wire can be connected with a rubber band.

Such a stand can be a real design solution: you can paint it a different color and it will be completely transformed, or you can fill the “voids” with decorative wire curls. This design is suitable for both a phone and a tablet, the only difference is the size of your gadget.

Photo frame made of clothespins

You can use clothespins to make a fun sun frame where the photos will be arranged in a circle. This is one of the easiest ways!

First you need to form a circle from thick cardboard. Cut out the middle or leave it, pasting it with a colorful picture - decide at your discretion.

Now glue the clothespins along the entire circumference so that the opening side of each of them faces up. Your wonderful photo frame is ready!

Photo: ok.ru Photo: pinterest.ru

Unusual Lego phone stand

Probably, this version of the stand will especially appeal to teenagers and men. Here you can show your imagination by creating a whole complex for your smartphone with the ability to change position, and maybe even amplify the sound of the speaker, or get by with a minimum of details. The creative process will not only bring pleasure, but also bring benefits.

To make such a design, you will need several parts and a base. The level of inclination can be changed by adding or removing parts. And the position of the gadget is easy to change, also adjusting the design.

Retro frame from an alarm clock

An interesting idea to make a stylish photo frame, giving a second life to an old alarm clock. Use a screwdriver to disassemble the alarm clock. Place the glass on the photo and cut out the image.

Now put the whole structure back together, but without the hands and clock mechanism. The photo is placed under glass. To securely fix the photo, coat its edges with glue.

This retro-style photo frame will be a wonderful decoration for a fireplace, bookshelf, or an excellent gift.


Photo: kukolnik-shop.ru


Photo: c-deco.ru


Photo: eldomo.ru


Photo: shop-myhobby.ru

Phone stand from an old cassette player

Perhaps someone has an old cassette player lying around at home. It is unlikely that it will ever be useful, and with the advent of disks and electronic media, no one uses cassettes anymore. But still, you can find a use for the cover in which the cassette was located.

To do this, just “turn” the cassette player inside out, tilting the lid back. The hole in which the cassette was held can accommodate a telephone. The advantages of this design are that it is easy to wash and transparent.

Window frame photo frame

Yes, you are reading absolutely correctly - you can make a unique panel in the shabby chic style from an ordinary window frame. To do this, of course, you will need an old window frame, which you don’t even need to paint - cracked paint and chips will become the “highlight” of the product.

The frame needs to be disassembled, one large photograph or several small ones must be inserted, depending on the number of windows. The photographs must first be glued onto a sheet of cardboard or thick paper. It is better to choose black and white photos - they will look harmonious with your “antique” luxurious frame.

Now all that remains is to assemble the product and find it a worthy place on the shelf of the living room or bedroom.


Photo: novamett.ru Photo: novamett.ru

Phone stand made from a plastic bottle

Many of us go on a trip or run errands by train. Often, on trains there is nothing near the sockets where you can securely place your phone. However, the gadget is discharged and needs to be charged. You can simplify this task by using a stand made from a bottle. Its essence lies in the fact that the gadget is placed in the cut off bottom of the bottle, which remains hanging on the plug from the charging device. This way, you don't have to stand nearby and hold the phone in your hands or look for a way to secure it.

To make such a stand holder you will need:

  • plastic bottle for shampoo or drink
  • scissors

First, wash the bottle to remove any remaining makeup or soda. Then, mark it. The back wall of the stand should become a kind of handle on which the phone holder will hang. The front wall should be high enough so that the phone does not fall over the edge. The next step is to cut out the stand along the office.

To do this, it will be more convenient to use a sharp stationery knife.

Cut a hole in the top of the handle so that it can be attached to the charger plug. You can decorate the stand to suit any taste: using adhesive paper, paints or stickers.

Photo frame made of buttons

It's no secret that many housewives, when sending old clothes to a landfill, cut off buttons from them in the hope that they will come in handy someday. Well, their time has come - decorate a photo frame with multi-colored buttons!

Choose buttons of different sizes - this will make it easier for you to create a composition. Place the large buttons on the frame first, and then fill in the gaps with small ones. If you are satisfied with the result, start gluing, fixing each button one by one.

If you make a frame-backing yourself from cardboard, it is better to first cover it with colored paper, because the gaps, one way or another, will be visible.


Photo: 1000000diy.ru


Photo: 2020-2020.ru

Wooden phone or tablet stand

If you want to make an original stand, then one of the good materials for making it is wood. Such a stand will be strong, durable, and can also serve as a good gift for a loved one. It is important to understand that working with wood requires some minimal skills and special tools.

In the process of work, in addition to a wooden block, you may need materials such as:

  • saw
  • jigsaw
  • sandpaper
  • wood cutting knives

Be careful and attentive when working with such tools.

Stages of making a stand:

  • Process the wooden block by sawing off the excess parts and making a recess at the top in the middle for a phone or tablet.
  • Using sandpaper, remove all roughness and splinters from the surface of the future holder.
  • You can coat the finished product with varnish or special paint.

Another option for a wooden stand for a phone or tablet is an analogue of its cardboard version. In this case, it is better to use plywood instead of a wooden block.

To do this, make a stencil of the “legs” of the holder and a crossbar that will fasten them together. And transfer it to the plywood. Carefully cut out with a jigsaw and smooth out any unevenness and roughness with sandpaper. Using super glue, connect the legs and the crossbar.

Photo frame made of seashells

Any family with children will probably find some seashells lying around. The tireless child is ready to collect tons of this material, without finding any use for it. Take this opportunity and decorate your photo frame with shells!

The basis can be a regular wooden or plastic frame. Select whole shells, rinse thoroughly, dry and start gluing. When the composition is finished, open the shell frame with varnish or paint.


Photo: infantilcolebeethoven.blogspot.com Photo: alexgrim.ru

DIY stand case for your phone or tablet

The most popular option for a gadget stand is a stand case. You will have to tinker with it a little, but the result is worth it. This option is convenient to take with you when traveling, it is durable and can protect the screen.

To make such a holder you will need:

  • facing material, it is best to choose leather
  • material for interior cladding
  • plain and thick cardboard or rigid material
  • elastic band for fastening
  • pencil
  • ruler
  • scissors
  • glue
  • double sided tape

How to do it?

  • Cut the cardboard according to the size of the tablet so that it completely covers it. This is the future basis, the dimensions of which will be basic for all elements.
  • Make several folds in the same way that the front of the case will then need to bend to support the tablet.
  • Now we take hard material, which will give the case stability. We cut it so that it follows the contour of the workpiece.
  • We apply it to the base and make an edging so that it does not interfere with the folds.
  • From the inside we treat the case with soft materials, gluing it to the base blank with double-sided tape.
  • The next step is fastening for the tablet itself. To do this, we make small holes in the rigid elements for elastic bands that will hold the tablet.
  • We glue the finishing material on the outside.

Do this as carefully as possible. The appearance of the product will depend on this.

That's all. The stand is ready! It is convenient and can be used not only as a holder, but also to protect the screen.

Denim photo frame

A creative youth photo frame can be made from old jeans. As a base, take a thick sheet of plywood or a rectangular wooden board. Draw the outlines of the future photo on it.

Prepare the decor - cut denim ribbons of the same width, but different lengths, so that the finished rounds are of different sizes. Lubricate each tape with glue on one side and twist it. When you have collected a lot of these “details”, cover the frame with them.

After complete drying, it is necessary to carefully trim the bottoms of the outer rounds from the inside, as well as the sides of the cardboard protruding from the sides. Now you can place your favorite photo here!

Photo: kukolnik-shop.ru


Photo: kukolnik-shop.ru


Photo: mebel-mart32.ru


Photo: kukolnik-shop.ru

Wall-mounted key holder for the hallway: 10 beautiful ideas

Stand-bag for tablet or phone

An original and cute version of a gadget stand. It is suitable for girls and can be a cute home accessory.

To make it you will need:

  • scissors
  • textile
  • padding material
  • thick cardboard
  • thread and needle
  • button

Manufacturing process:

  • First you need to cut out a template from cardboard according to the size of your gadget.
  • Then cut out a rectangle from the fabric twice the size of the resulting template.
  • Fold the fabric base in half and mark with stitches a fold 10 cm from the edge.
  • Sew the bag, leaving one side unsealed.
  • After turning the bag inside out, position it so that the seam runs through the middle and a diamond shape is formed at the end. After ironing it, bend the top corner of the diamond so that it is in the middle and sew. This is shown in more detail in the figure.

  • Then insert cardboard into the product and fill the remaining space with padding material.
  • Make a seam along the very edge of the template. Folding the edges of the unstitched side, carefully stitch it, leaving an opening for stuffing.
  • Make a roll and sew up the hole.

That's all. The product is ready. You can decorate it to your liking, giving it even more charm!

Photo stand

Tired of framed photos? Do you want to diversify your interior? Then make a photo stand using our step-by-step instructions.

Manufacturing process:

You will need:

  • Hot glue gun
  • Wooden clothespins (preferably small)
  • Wooden blocks (15 by 15 cm)
  • Wood varnish

Preparation method:

  1. Sand the wooden blocks and coat them with varnish.
  2. Glue clothespins to the back of the block. They will be a photo holder.
  3. The product is ready!

If desired, you can paint the bars with paint.

Phone stand made from paper clips

Another interesting and at the same time very simple option. If you have several office clips at home, then feel free to use them!

You will need 2 clamps: one larger and the other smaller. By connecting them together as shown in the figure, in a couple of seconds you will get a phone holder.

This can also be done from two clamps of the same size.

Notebook Stand

Manufacturing process:

You will need:

  • Three tablets
  • Drill
  • Pencil


Preparation method:
  1. Saw two planks. They will go on the legs of the stand. Don't forget about wood processing.
  2. Punch square vent holes in the wider board.
  3. Drill similar holes in other boards as well.
  4. Fasten the parts to each other.
  5. The product is ready!

Stands for drawings from the Interdesign company.

Sort by: DefaultPriceNovelty Description
The suspension system will allow you to effectively place drawings and photographs. In addition, the original and beautiful decorative element Starfish will decorate the interior of any children's room. On the back of the Starfish there is a special connector for the cable. If desired, you can easily take it out and use the Starfish as decoration. The drawings are attached to the cable using plastic clips. Five clips are included. Drawings can also be attached to the cable using neodymium magnets. Pay attention to the peculiarity of the Starfish element - it has a magnetic mount, to which you can also attach photos, drawings and any useful information using a magnet. The kit includes a magnet with a decorative cap in the form of an air bubble. The starfish and magnet cap are made of MDF and painted with safe acrylic paint. The cable system is very functional and at the same time beautiful; it decorates the children's room, creates comfort in it and gives a good mood.

Description

A drawing mount with a cable will allow you to effectively display drawings and photographs. In addition, the original and beautiful decorative element Fish will decorate the interior of any children's room. On the back side of the Rybka there is a special connector for the cable. If desired, you can easily take it out and use the Fish as decoration. The set includes a cable with a weighting agent, thanks to which the drawings hang evenly, beautifully and do not move to the side. The drawings are attached to the cable using plastic clips. Five clips are included. Drawings can also be attached to the cable using neodymium magnets. Pay attention to the peculiarity of the Fish element - it has a magnetic mount, to which you can also attach photos, drawings and any useful information using a magnet. The kit includes a magnet with a decorative cap. The fish is made of MDF and painted with safe acrylic paint. It looks very presentable, creates coziness in the children's interior and gives a good mood.

Description

The hanging system will allow you to effectively place drawings and photographs. In addition, the original and beautiful decorative element Medusa will decorate the interior of any children's room. On the back side of the Medusa there is a special connector for the cable. If you wish, you can easily take it out and use the Medusa as decoration. The drawings are attached to the cable using plastic clips. Five clips are included. Drawings can also be attached to the cable using neodymium magnets. Pay attention to the peculiarity of the Medusa element - it has a magnetic mount, to which you can also attach photos, drawings and any useful information using a magnet. The kit includes a magnet with a decorative cap in the form of an air bubble. The jellyfish and magnet cap are made of MDF and painted with safe acrylic paint. Volumetric elements make Medusa very presentable, thanks to this she decorates a child’s room, creates comfort in it and gives a good mood.

Description

Price for 1 piece. Mount for children's drawings made of 3 mm thick plastic

dou-shkola.ru

Stands for modeling produced by Interdesign

Content

Stands for modeling are designed for decorating an exhibition of children's works made of plasticine or plaster. The significant distance between the shelves allows you to place children's works up to 10 cm high, and durable fittings make it possible to display even works that have significant weight. Well, the most important thing is that parents now have the opportunity at any time to enjoy their children’s first masterpieces, their development, and the results of their work in the classroom. Children from different groups can show each other their creative successes and invite each other to craft exhibitions.

On the website you can buy 2 types of stands for crafts:

    durable shelves made of bent acrylic, attached to the stand using self-tapping screws. They do not break, do not break, and are safe for use by children in kindergarten.
    bright decorative stands made of MDF, 6 mm thick. Very light, easy to use by children, placed in the locker room on lockers, group tables or any other horizontal surfaces.

Stands for crafts < are a guarantee that the creations of the children in your group will be appreciated, and they themselves will feel the significance of their efforts and receive an incentive for further work. In addition, even without children's crafts, the modeling stand looks very impressive and serves as an interior decoration.

You can order any model of stands for crafts with the number of shelves you need. To do this, when ordering, inform the manager about this or write in the comments to the order (when ordering in the online store)

We try to make it as comfortable as possible for you to shop with us and find the product you are interested in!

Sort by: DefaultPriceNewness

Description Stand-stand for modeling (30 shelves) - The stand is made of PVC plastic 3 mm thick. The image is applied to film or directly to plastic. In addition to the stand, 30 shelves for plasticine crafts are supplied. Screws are supplied with the shelves; The stand indicates the places where the shelves should be screwed. At the request of the customer, the inscriptions and color design of the stand can be changed. Description

The “Chamomile” craft stand contains 30 shelves for crafts. Material: 3 mm thick plastic. The original design of the stand will definitely please your students! Well, the most important thing is that parents will have the opportunity at any time to enjoy the first masterpieces of their children, evaluate their development, and the results of their work in the classroom. Stand dimensions: 500x500 mm.

Description

We present to your attention an exclusive stand for crafts “Sheep”. The craft stand is made of natural wood and painted by hand! Pay attention to the volumetric elements - they give the craft stand a very presentable appearance. The stand can be hung on the wall or placed on cabinets. You can highlight the children's names with stickers, or you can make a group craft and place it on the shelf. In addition, even without children's crafts, the modeling stand looks very impressive and serves as an interior decoration. Pleasant blue and white tones create an atmosphere of calm and comfort, and a rainbow makes the children's interior look fabulous.

Description

We present to your attention an exclusive stand for crafts “Sky”. The craft stand is made of natural wood and painted by hand! Pay attention to the volumetric elements - they give the craft stand a very presentable appearance. The shelf stand can be hung on the wall or placed on cabinets. You can highlight the children's names with stickers, or you can make a group craft and place it on the shelf. In addition, even without children's crafts, the craft stand looks very impressive and serves as an interior decoration. Pleasant white and blue tones create an atmosphere of comfort, kindness, and tranquility.

Description We present to your attention an exclusive stand for crafts “Unicorn”. The craft stand is made of natural wood! The stand can be hung on the wall or placed on cabinets. You can highlight the children's names with stickers, or you can make a group craft and place it on the shelf. In addition, even without children's crafts, the craft stand looks very impressive and serves as an interior decoration. Pleasant colors and an original image of a stand for crafts make the children's interior truly fabulous and cozy. Description

We present to your attention an exclusive stand for crafts “Sun”. The craft stand is made of natural wood and painted by hand! Pay attention to the volumetric elements - they give the craft stand a very presentable appearance. The stand can be hung on the wall or placed on cabinets. You can highlight the children's names with stickers, or you can make a group craft and place it on the shelf. In addition, even without children's crafts, the modeling stand looks very impressive and serves as an interior decoration. The yellow color of the shelf and the smiling Sun will create comfort, an atmosphere of fairy tales and goodness.

Description

Tabletop stand for crafts “Pinocchio” – Designed for 30 children’s works. If you need a stand for a smaller number of crafts, please indicate this information in the order notes. At the end of each shelf there are acrylic pockets for indicating names. The stand can be installed on a locker in the dressing room, on any cabinet or on a table. Supplied unassembled, assembly instructions included. Assembly video tutorial: Pay attention!!! The picture on the side walls of the stand is different!

Description

Tabletop stand for crafts “Chicken” - designed for 30 children’s works. If you need a stand for a smaller number of crafts, please indicate this information in the order notes. At the end of each shelf there are acrylic pockets for indicating names. The stand can be installed on a locker in the dressing room, on any cabinet or on a table. Supplied unassembled, assembly instructions included. Assembly video tutorial:

Description

Desktop stand for crafts “Butterfly” - the stand is made of durable MDF, 6 mm thick. Designed for 30 children's works. At the end of each shelf there are acrylic pockets for indicating the names of the young sculptors. The stand is universal: it can be placed both on horizontal surfaces (tables, cabinets, cabinets) and hung on the wall. Supplied unassembled. width: 630 mm height: 400 mm depth: 120 mm

dou-shkola.ru

Portable organizer

An irreplaceable thing for an apartment or office will remind you of important meetings and other plans. The wall organizer is made from a sheet of plywood. To do this, two holes are made at the top of the material. They are necessary to hang the item on the wall.

Simple instructions for making your own organizer will help you quickly get the job done.

For this craft you will need a notepad. The cover is removed from it. Then you need to cut a rectangle from the cork sheet. These parts are placed on the plywood and then attached to it.

For the pocket, take a cork sheet, and cut out all the elements with a stationery knife. Then the parts are glued together and attached to plywood. The wall organizer is ready.

Expert opinion

Strebizh Viktor Fedorovich, leading construction foreman

The easy-to-process and inexpensive material is today used to make a variety of interior items, decor and toys. If you want to clarify something, please contact me!

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]